How to delete 5 "reply to comment"s

Hi folks! I am new to having a Blackberry and learning as I go. Tonight as I was reading FaceBook messages on my Blackberry Curve 8530 I must've hit "reply" to a comment left on my wall. SOMEHOW this "reply" managed to repeat itself 5 times. So now, sitting on my phone are 5 "reply to comment"s ready to be sent. Meanwhile, I do not want to reply to the comment left on my wall!And I cannot seem to delete ANY of them!!! I tried to delete by opening the message and then pressing the menu key and selecting delete, but that doesn't work. I tried to hit the menu key after having highlighted the message in the inbox, and that doesn't work either. Does anyone have any clue how I can delete these 5 "reply to comment"s off of my phone??? Now I just want them gone!

Hey guys! Thanks for the help! I found out that the file '.DS_Store' is actually a hidden file todo with Finder, I also found the correct code for 'Lion' to re-hide it. Here are the links for anyone in the future
http://www.mikesel.info/show-hidden-files-mac-os-x-10-7-lion/
http://www.westwind.com/reference/os-x/invisibles.html

Similar Messages

How to delete the commented out lines in PC editor of a SAP Script?

Hi Experts,
I hv lot of commentde out code in the PC editor of a my_SAP_Script.........so, wanna to delete all this commented out code, so, let me know that, Do we hv any option other than manual deletion.
Currently am doing it by,
keeping the line totally blank,
keeping the left small box, where we define paragraph formts,
going BACK,
save + activating,
now, those lines r disappearing!!
but, let me know, Is there any other MENU/push button optin to delete these lines?
replies appreciatesd,
thanq

[pc editor doc|http://help.sap.com/saphelp_nw2004s/helpdata/en/f4/b49f1b453611d189710000e8322d00/frameset.htm]

How to delete xml tags Urgent

on release function i am inserting this value
"(&-box*&", "&*box-&
" in to my text box,
in text box will display like this (squarebox), when i am
trying to delete
squarebox ,
box deleting but
(&-box*&", "&*box-&
these xml elements are showing , what i have to
do ? it has to delete,
it amy have multipule box in my equation. how do delete xml
elements in this case, this is my xml code. how to delete? any one
can help me?

Then you should provide more details on what you want this new script should do.
To "delete XML tags in already tagged text", all you need is use the "untag" command on an XML Element. But how would the script "know" what XML Element should be untagged?
Disclaimer: This reply is in no way enforceable, legally binding, a promise or contract, an agreement (written, verbal, or otherwise), a commitment, obligation, or free or paid-for offer of any kind to further help, guide, aid, tip, or not hinder you, or contribute to, correct, investigate, comment on or assist with any existing, forthcoming, or planned project.

How to delete pictures with iPhoto off your camera roll?

I bought iphoto to help me organize pictures on my Ipad and Iphone. I especially like the idea of being able to compair two or more similar pictures and save the best photo and delete the copies that weren't as good. I liked this feature but then discovered that it was not deleting the pictures off the camera roll.
I would love someone to tell me how to delete pictures in iphoto so they are removed from my Camera Roll at the same time. Being able to look at two pictures at the same time and decide which one you want to keep is great, but if I can't delete the one I don't want it is a waste of time.

Titan2,
Thanks for the reply, I agree that the Iphoto needs to be the stock app. Hope it isn't too long.
Ralph,
I agree that the iphoto for the ipad might not be the best place to organize, but when you are retired and traveling you would like to select the pictures you want to keep and not wait until you get home. The camera roll doesn't let you compair two or more photos to see which one is best, Iphoto does but I want the poorer photos off the ipad so I don't have to wait until I get home and I want to use the memory for the best photos. I'm trying to figure out a round about way so I know which ones to delete on the camera roll.
I thank both of you for your comments.

How to delete the old code in the EXIT_SAPLRSAP_001

Hi All,
In R3 system, I wrote an exit for 2LIS_11_VAHDR by using T-code CMOD in the function exit EXIT_SAPLRSAP_001 and the code does not meet my requirement today i want to delete the code and i will write the fresh one. now my problem is i am not able to delete the code can any body suggest me how to delete the old code.
and can we create new project and can we assign to the Enhancement RSAP0001.
Can anybody suggest me in this
Thanks in advance......
Narendra

Hi Narendra,
You can put the code in comments, if you don't want to use the old code..You can delete also..But be sure that code belongs to you only..
SE38>zxrsau01>change-->find out your data source
Comment(Or can delete) the code starting from WHEN '2LIS_11_VAHDR'. to the end of the code that you have written..
If you really want to delete the assignment of RSAP0001 to your old project>goto CMOD>your project name>change>delete assigment
Then create a new project and assign the enhancement RSAP0001 to your new project and write the code in Include 'ZXRSAU01'..
Hope it helps
Thanks
Teja

How to delete string or line from unix file(dataset) of application server

Hi All,
After transfer workarea information or all records into dataset(unix file). When I see the file in application server automatically the last line is shown a blank line. I am not passing any blank line.
I have tried for single record than also the file generates the last line(2nd line) also a blank line.
When I m reading the dataset, it is not reading the last blank line but why it is showing the last blank line?
How to delete string or line from unix file(dataset) of application server?
Please give your comments to resolve this.
Thanks
Tirumula Rao Chinni

Hi Rio,
I faced similar kind of issue working with files on UNIX platform.
The line is a line feed to remove it use
DATA : lv_carr_linefd TYPE abap_cr_lf VALUE cl_abap_char_utilities=>cr_lf.
DATA : lv_carr_return TYPE char1,
         lv_line_feed   TYPE char1.
lv_line_feed   = lv_carr_linefd(1).
lv_carr_return = lv_carr_linefd+1(1).
Note: IMP: The character in ' ' is not space but is a special
character set by pressing ALT and +255 simultaneosly
REPLACE ALL OCCURRENCES OF lv_line_feed IN l_string WITH ' '.
REPLACE ALL OCCURRENCES OF lv_carr_return IN l_string WITH ' '.

How to delete file systems from a Live Upgrade environment

How to delete non-critical file systems from a Live Upgrade boot environment?
Here is the situation.
I have a Sol 10 upd 3 machine with 3 disks which I intend to upgrade to Sol 10 upd 6.
Current layout
Disk 0: 16 GB:
/dev/dsk/c0t0d0s0 1.9G /
/dev/dsk/c0t0d0s1 692M /usr/openwin
/dev/dsk/c0t0d0s3 7.7G /var
/dev/dsk/c0t0d0s4 3.9G swap
/dev/dsk/c0t0d0s5 2.5G /tmp
Disk 1: 16 GB:
/dev/dsk/c0t1d0s0 7.7G /usr
/dev/dsk/c0t1d0s1 1.8G /opt
/dev/dsk/c0t1d0s3 3.2G /data1
/dev/dsk/c0t1d0s4 3.9G /data2
Disk 2: 33 GB:
/dev/dsk/c0t2d0s0 33G /data3
The data file systems are not in use right now, and I was thinking of
partitioning the data3 into 2 or 3 file systems and then creating
a new BE.
However, the system already has a BE (named s10) and that BE lists
all of the filesystems, incl the data ones.
# lufslist -n 's10'
boot environment name: s10
This boot environment is currently active.
This boot environment will be active on next system boot.
Filesystem fstype device size Mounted on Mount Options
/dev/dsk/c0t0d0s4 swap 4201703424 - -
/dev/dsk/c0t0d0s0 ufs 2098059264 / -
/dev/dsk/c0t1d0s0 ufs 8390375424 /usr -
/dev/dsk/c0t0d0s3 ufs 8390375424 /var -
/dev/dsk/c0t1d0s3 ufs 3505453056 /data1 -
/dev/dsk/c0t1d0s1 ufs 1997531136 /opt -
/dev/dsk/c0t1d0s4 ufs 4294785024 /data2 -
/dev/dsk/c0t2d0s0 ufs 36507484160 /data3 -
/dev/dsk/c0t0d0s5 ufs 2727290880 /tmp -
/dev/dsk/c0t0d0s1 ufs 770715648 /usr/openwin -
I browsed the Solaris 10 Installation Guide and the man pages
for the lu commands, but can not find how to remove the data
file systems from the BE.
How do I do a live upgrade on this system?
Thanks for your help.

Thanks for the tips.
I commented out the entries in /etc/vfstab, also had to remove the files /etc/lutab and /etc/lu/ICF.1
and then could create the Boot Environment from scratch.
I was also able to create another boot environment and copied into it,
but now I'm facing a different problem, error when trying to upgrade.
# lustatus
Boot Environment           Is       Active Active    Can    Copy
Name                       Complete Now    On Reboot Delete Status
s10                        yes      yes    yes       no     -
s10u6                      yes      no     no        yes    -        Now, I have the Solaris 10 Update 6 DVD image on another machine
which shares out the directory. I mounted it on this machine,
did a lofiadm and mounted that at /cdrom.
# ls -CF /cdrom /cdrom/boot /cdrom/platform
/cdrom:
Copyright                     boot/
JDS-THIRDPARTYLICENSEREADME   installer*
License/                      platform/
Solaris_10/
/cdrom/boot:
hsfs.bootblock   sparc.miniroot
/cdrom/platform:
sun4u/   sun4us/ sun4v/Now I did luupgrade and I get this error:
# luupgrade -u -n s10u6 -s /cdrom
ERROR: The media miniroot archive does not exist </cdrom/boot/x86.miniroot>.
ERROR: Cannot unmount miniroot at </cdrom/Solaris_10/Tools/Boot>.I find it strange that this sparc machine is complaining about x86.miniroot.
BTW, the machine on which the DVD image is happens to be x86 running Sol 10.
I thought that wouldn't matter, as it is just NFS sharing a directory which has a DVD image.
What am I doing wrong?
Thanks.

How to Delete and Reset a Lost Root Password on a System With a Mirrored ??

hi All,
we are experiencing problem,lost root password on Solaris 10 Sparc T5120, with mirror root,
and we found the solution from Metalink.oracle.com, has anyone have try this??
here list capture the file system :
Filesystem size used avail capacity Mounted on
*/dev/md/dsk/d10 2.0G 349M 1.6G 18% /*
*/dev/md/dsk/d40 9.8G 563M 9.2G 6% /usr*
*/dev/md/dsk/d30 9.8G 1.4G 8.4G 15% /var*
*/dev/md/dsk/d50 7.9G 310M 7.5G 4% /opt*
*/dev/md/dsk/d600 3.8G 4.3M 3.8G 1% /home*
*/dev/md/dsk/d602 471M 20M 404M 5% /app/controlm*
*/dev/md/dsk/d601 471M 251M 173M 60% /app/ctsa*
*/dev/md/dsk/d604 4.9G 1.1G 3.8G 23% /app/oramon*
*/dev/md/dsk/d603 20G 11G 8.2G 58% /app/oracle*
*/dev/md/dsk/d606 39G 10.0G 29G 26% /proj/iprdb01/orafra/iprod01p*
here the step :
Solstice DiskSuite[TM] Software: How to Delete and Reset a Lost Root Password on a System With a Mirrored Root Disk [ID 1010755.1]
Solution
Steps to Follow
How to delete and reset a lost root password on a system with a mirrored root disk.
1) Insert the Solaris[TM] Operating System CD-ROM into the CD-ROM drive.
2) Once the CD-ROM is in the drive, perform a stop-a. This brings the system down to the "ok" prompt.
3) From the "ok" prompt, perform a single-user boot from the Solaris OS CD-ROM.
ok boot cdrom -s4) At the "#" prompt, determine which disk is the system's boot disk (containing the root file system). There are several Oracle architectures and various configurations of systems when it concerns a boot disk. As a general rule, most boot disks are attached to controller 0 (c0). Usually, their SCSI target is
either 3 (t3) or 0 (t0). However, Oracle machines are very flexible, and the boot disk could be at a different location. If you are not sure which disk is your boot disk, perform the following steps to determine the location of the boot device:
a) # eeprom boot-device
The output might appear to be simple, such as "disk" or "disk1" or more complicated, such as a pathname "/iommu/sbus/espdma@4,8400000/...../sd@3,0:a".
b) Make note of the boot-device. If the boot-device is a pathname, it is beyond the scope of this information to provide the location of the customized boot disk. However, for most configurations,
finding the customized boot disk is an easy task. The "Format" command shows all available disks:
#format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
(enter its number): c) Enter d to exit format.
Now, you will have an idea what disks are on the system. Therefore, if the boot-device is "disk" and format shows "c0t0d0" (on some systems "c0t3d0") then that is the boot device. If boot-device
shows "disk1" and format shows "c0t1d0," then that is the boot device. If format shows multiple disks, then based on what the "eeprom boot-device" command shows, the system's boot disk would be:
boot-device format
disk c0t0d0 or c0t3d0 (machine dependent)
disk1 c1t0d0
disk2 c0t2d0
disk3 c0t3d0 or c0t0d0 (machine dependent)
and so on ....
5) Because the system was not brought down gracefully (no root password means having to use the Stop-a keystroke to "crash" the system), you need to run "fsck" to clean the root partition (slice). The fsckalso confirms that you selected the proper slice.
# fsck /dev/rdsk/c1t0d0s0
where the X and Y are determined by the previous procedure. It is also possible to have a root partition which is not on slice 0 (s0), but, again, that is not a standard configuration.
The output of "fsck" looks like this:
** /dev/rdsk/c1t0d0s0
** last mounted on /
** Phase 1 .....
The second line in the output of "fsck" ("** Last mounted on /") confirms that this is the correct root filesystem partition. Answer "y" to any questions fsck asks. There shouldn't be too many items
needing repair. If there are, there is a possibility of a corrupted root filesystem. After fsck is finished, mount the root partition:
# mount /dev/dsk/c1t0d0s0 /a
Again, X and Y are the same as for the fsck command.
For example:
# mount /dev/dsk/c1t0d0s0 /a
6) From the root prompt, set the proper TERM type command (such as vt100, dtterm, sun, and so on)
by entering this command:
# TERM=sun; export TERM
7) Use the VI text editor to edit the /etc/shadow file:
# vi /a/etc/shadow
8) The first line of the /etc/shadow file is the one you want to modify.
It looks like this:
root:c3.yAVmYodWsc:6445::::::
9) Delete every character between the first and second colons in the first line of the file. When you finish deleting the characters, the line should look like this:
root::6445::::::
10) Press the Escape key, then enter the following to save the file and exit vi:
:wq!
11) Use the VI text editor to edit the /etc/system file andremove the "rootdev" line shown below:
# vi /a/etc/system
*rootdev:/pseudo/md@0:0,0,blk
Don't comment out the "rootdev" line. Actually remove it.
12) In the /a/etc/vfstab file, replace the lines for the system filesystem meta-devices with their underlying partitions. For example, change lines from
/dev/md/dsk/d0 /dev/md/rdsk/d0 / ufs 1 no -
to
/dev/dsk/c1t0d0s0 /dev/rdsk/c1t0d0s0 / ufs 1 no -
ONLY change the lines for root (/) and the filesystems that were affected by the actions you took in step 1 of this procedure. All other metadevices may stay as is in this file.
13) Unmount root, check the root filesystem, and then stop the system:
# cd /
# umount /a
# fsck /dev/rdsk/c1t0d0s0
# stop-a
14) Boot to single-user mode:
ok boot -swTHIS STEP IS VERY IMPORTANT; YOU MUST BOOT TO SINGLE-USER MODE TO AVOID FILESYSTEM CORRUPTION.
If the system does not boot to single user mode, you might have made a mistake in the previous steps.
15) Because the root password was cleared in an earlier step, press Return when prompted for the the root password. Once you are in single-user mode, you must clear the metamirrors and all the sub-mirrors for the root filesystem. For example, if root (/) is d0, run the following command:
# metaclear -f -r d0
Running the metaclear command not only clears the metamirror but also clears the submirrors that are part of this mirror.
16) When the metamirror is cleared, continue the boot up to multiuser mode by either pressing CTRL-D or by entering the following:
# exit
Now everything should be as it was, except that the system partition is on the underlying partition and isn't mirrored. You will simply need to re-create the metadevices for the root mirror as you had originally.
many thanks

Hi,
Halt your machine.
Boot with fail-safe mode.
format and list out the disks. (You can get the root & mirror disk (c#t#d#) details from /etc/lvm/md.tab of your root or mirror disk. Earlier explorer output may help)
Mount the root disk and remove the password entry in /etc/shadow
umount it.
Mount the mirror disk and remove the password entry in /etc/shadow
umount it.
reboot the server.
Hope this helps!

How to delete the messages from SXMB_MONI which are already cancelled .

Hi All,
The messages were earlier in System error(Red flag) state so i cancelled it manually.
I want to know how to delete the messages from sxmb_moni which are already cancelled manually using ctrl+f8.
if not possible , then i want to see them in earlier state i.e.., in System error(Red flag).
can any tell me the procedure of doing it.
thanks
Sai.

Hi AmitSri,
Thanks for u r reply,
What is retention period, where can i find this option.
And i don't have authorizations to sxmb_adm --> configure delete procedure
--> Define interfaces for archiving and retention period.
and to RSXMB_DELETE_MESSAGES in se38 , i don't have authorizations to run
Is there any way to delete the messages or make them to System error( Red flag) which are manually cancelled.
Thanks
Sai.
Edited by: sai_SHA on Aug 17, 2011 12:29 AM

How to delete URL Maintenance in peoplesoft

how to delete URL Maintenance in peoplesoft , Please any one suggest to me how to delete identifier.
Navigation : Main menu -->Peopletools --> Utilities --> Administration --> URL
in this url page have URL maintenance.I added one identifier .
URL Identifier:
*Description:
*URL:
Comments:
Regards,
lokeswar

Main Menu>PeopleTools>Portal>Structure and Content>Traverse to the URL by clicking on the links(Peopletools --> Utilities --> Administration --> URL)>Click on Edit Link
Check the box for "Hide...."

How to delete the total entries in ztable

Hi ,
How to delete the total entries in ztable...
code pls.
regards,

Hi Venkat,
pls see below records,
Plant Material                       Alternate material
3770 00000000000126875          2020202
3770 000000000005999335        2020202
3770 117196                           2020202
3780 00000000000126875           2020202
3784 00000000000126875         2020202
3784 000000000002809336       2020202
3784 000000000005999335        2 020202
3789 00000000000126875            2020202
if i write below syntax ,
delete from ztable where matkl = '2020202'.
all records contains matkl = '2020202' will be deleted ??
pls. reply.

How to delete multiple songs from iPhone 5S without losing form iTunes? The unchek function has not worked. Why?

How to delete multiple songs from iPhone 5S without losing form iTunes? The unchek function has not worked. Why?

Sorry I had to reply through your profile Gail from Maine, my PC has java issues. In any event, when I delete them directly from my device everything is perfect and cool. However, in the rare instance I want to add new music that I actually buy in stores (I know, quite the unique and old-fashioned idea...but hey Im an audiophile) once I upload the tunes, everytime I sync my library it re-adds everything that I spent hours deleting. In a perfect world, I thought I could maintain a massive iTunes Library, and add or delete (remove) songs from my iPhone to save both memory or keep my iPhone selections more current/apt to my musical "tastes" at that time. I know about the whole playlist thing, but thought there might be an easier way. ie - checking/un-checking the little box next to the song name, and then doing a sync. Again, everytime I do this however, whether everything is checked or un-checked it adds the entire library! So frustrating. Any suggestions. Thank you graiously in advance for your help.

How to delete multiple yellow request in PSA

I am in BI7 and I have to delete the all the request present in PSA But in my PSA there are around more than 500 request which are in yellow status.Please suggest how to delete all the request in one go ,Since it very cumbersome to change status of every request to red and then delte it

Hi,
Debjani thanks for your reply,
It helped me
I have first deleted the contents from PSA table and
then I have searched for request in RSTSODSREQUEST but this table does not contain that requests
then i have got another table RSREQDONE whcih contains that request so I have deleted request from that table.
Final solution is
Go to SE14 >> Give the PSA Table name >> delete it
Then delete the requests from the table RSTSODSREQUEST/RSREQDONE

How to delete some date in target table at a mapping?

How to delete some date in target table at a mapping?
I extract date from source tabel into target table,
but before extract date I want to delete some date from target?
how to do?

Just to change a bit of terminology in the reply, within the mapping, click on operator properties and choose TRUNCATE/INSERT.
Note that truncate is dependent on constraints, so you probably must disable those before doing this. You can of course do DELETE/INSERT...
Jean-Pierre

How to delete photo albums in iphone?

how to delete photo albums in the iphone

tanks for yoour reply buddy... but the problem is when i click the ituns app in iphone, there is no photo tab... just music, vedios, search, genius and more are there..... how to find this albums tab??

How to delete 5 "reply to comment"s

Similar Messages

Maybe you are looking for