Sort Field to be made mandatory while creating maintenance plan(IP42)

Hi Experts,
Please suggest me the way by which i can make the field "Sort field" mandatory while creating maintenance plan (IP42).
Regards,
Vivek

Vivek,
There is no std config to acheive this. Please use IPRM0004 Maintenance plan/item: Customer check for "Save" to accomplish the same.
Mahee

Similar Messages

  • While Creating Maintenance Plan ip41- Sales Document tab is deactive

    Hi,
    while Creating Maintenance Plan IP41- Sales Document is deactive.
    Unable to fill the Sales Number.
    Can anybody tell what is the procedure to active the Sales Document tab,since i have to entry sales number in it.
    Thanks in advance.
    Mohit

    hi
    can you explain in detail ,you can create the maintenance plan for sales document using T code IP50 .kindly check
    regards
    thyagarajan

  • How to make the fields of the table mandatory while creating new entries..?

    Hi,
    I have created a new Z table which has 6 fields. All the 6 fields are KEY fields and all are of CHAR type. I have generated the table maintenance generator for the same. My requirement is all the fields should be MANDATORY while creating the entries. No field should be BLANK.
    When creating the new entries in the table, even if I don't give any values to some of the fields, it is saving the entry. But, it shouldn't happen like that. If any of the field is kept blank, it should not allow the user to save the entry. Can someone tell me how to approach this. Will there be any settings while creating the table which takes care of this.
    I read somewhere that this can be done using the Table EVENTS. Can someone tell me what is the code that we should write there in the Events which prevents the user from saving the blank fields. While writing the logic in the events, how to check whether the particular field is BLANK or not. Will the values be stored in any internal table kind of thing..?
    My table name is ZCRF_TAB and the fields are FLD!, FLD2, FLD3, FLD4, FLD5 & FLD6. Can someone provide me sample code for my requirement. Thanks in advance.
    Best regards,
    Paddu.

    Hi,I think u have generated Table Maintainance Generator, goto Environment->Modifications->Events
    Select appropriate option by using F4,I think value 05 is appropriate for u r requirement.Enter From routine name.Dbl click on the routine.
    Write the appropriate code like:
    If ZTABLE-FIELD1 is initial.
    Message (E000) with "Fill all the manadatory fields".
    Thats it.Just look at the following docu with screenshots,by this understand how u can use Table Events:
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/abap/how%20to%20implement%20events%20in%20table%20maintenance.doc
    Regards,
    Rock.

  • Error while creating Maintenance Plan

    Hello,
    When I am creating a Maint Plan, I am getting error
    No packages have yet been assigned to the maintenance item 143
    Message no. IP364
    How do I solve this??
    Narendra

    Hi Narendra
    While creating Task List, for all operations u have to maintain the maintenance packages. According to the Maint. Pack only it will schedule the operations and release the order for the particulaer interval...
    under operation tab
    left side bottom conner... click it and you cna assign...
    For Creating maintenance package... TCODE : IP11
    - Pithan

  • How to make UOM as mandatory while creating PR in ME51N

    Hi all,
    While creating PR, UOM is not populated automatically. The PR also created without entering UOM.
    So, here UOM is optional. how to make this UOM as mandatory while creating PR in ME51N?
    Thanks
    pabi

    Hi Pabitra
    Go to SPRO>Materials Management>Purchasing>Purchase Requisition>Define Document Types ( CHECK which type of field selection is assigned to your PR Document type)
    and then go to
    Go to SPRO>Materials Management>Purchasing>Purchase Requisition>Define Screen Layout at Document Level>select that field selction here eg NBB  then go to details, then double click Quantity and Price ( Filed selection group) there make filed label Unit of measure as Required quantity
    and then  slect the filed selection ME51N and do the same settings as above.
    Cheers
    Kris

  • To make profit center as mandatory while creating cost center

    Hi,
    what is the procedure to make profit center as mandatory while creating cost center.
    Thanks and Regards
    Boppana

    Hi Boppana,
    There are two possibilities to have the profit center field as
    mandatory in KS01 (cost center creation):
    a) You can modify message number KS096 to "Error" via OBA5.
       Thus, the users would no be able to save a cost center without enteri
       a profit center.
       Depending on Your release you can make KS096 modifiable by
       implementing note 486781.
    b) You can directly modify the field via SE51 (SE51 -> Element list ->
       Rider Special Attributes) to mandatory entry.
       But in order to do this, You will need an SAP developer and
       object key (available via OSS ).
    I would strongly advise method a). It's simpler and you don't
    have to modify a SAP object (it would be a modification of the standard)
    br, Guido

  • Set sap Component mandatory while creating the support desk message

    Hi,
       When create the support desk message from any application sysytem, the sap component get selected automatically but when we create the suppport desk message from the Easy Access the component wiil be blank, so some user create the support message without giving the component. So we want to make the component as mandatory while createing the support desk message from application system and also  set mandatory  when we create support message in solman.can anybody help me in setting component mandatory.
      Regards
      charan

    Dear Charan,
    The logic of setting the SAP Component mandatory is explained in the note 640532.
    Kindly use the note to resolve the purpose.
    Hope this solution helps.
    Regards
    Amit

  • Effects of making PR mandatory while creating PO?

    Hi,
    What will be the effect of making PR mandatory while creating PO?

    Dear Ujjwal
    Go to SPRO-Material Managamant-Purchasing--Authorization Managmant-2) Define Functional Auth for buyers---Function Authorizations: Purchase Order Create New function Authority(02- PO With Ref to PR) Mark Ref to Purchase Req.As per require condition.
    Then Go to SU01 pass your SAP ID then goto select parameter and pass Parameter ID as EFB ,Parameter Value 02(as per your confi, and save.)

  • While creating Maintenance order using t-code iw31 mainwork center not pick

    Hi,
    while creating Maintenance order using t-code iw31 Maintenance work center not picking from drop down (already have in drop down)but giving manually accepting.
    --Ganesh

    Hi,
    My understanding is that the selected work center is not copied into the input field. This can be corrected with note [1451299|https://service.sap.com/sap/support/notes/1451299]. Check if the note is relevant for your system.
    -Paul

  • Error while creating a Planned Order

    Hi SAP Experts,
    I have an error encountered while creating a Planned Order which is "Mode linkage problem with mode number".
    Diagnosis:
        An application program called an LCA routine and the following error occurred:
        An order has at least one condition with mode linkage with the same mode number. The activities of this condition must have compatible modes. The modes are compatible when each mode of one activity has a mode for the other activity with the same mode number. The first activity that violates the condition is given in the return code table in ABAP.
    Please enlighthen me what is this error and what should be done to this error.
    Thanks in advance,
    Raymond

    Check the PPM or PDS being used in the Planned Order.
    Most likely you have a Setup Activity followed by Produce Activity. However the Mode (i.e. Resource) used in the two activities are different. The same Mode needs to be used both in Setup and corresponding Produce activity.
    Hope this helps,
    somnath

  • Error while creating Inspection plan

    Hi,
    While creating inspection plan in QP01, system is showing error  "Material type ZROH is not defined for task list type Q''
    Please help me to solve the error.
    Thanks
    Prasant

    Hi,
    This is due to the configuration error,
    Just use T.Code OP50
    Create an entry for task list type "Q" with material type "ZROH" and save,
    Then try creating a Quality Inspection Plan, it will work
    Regards
    Merwyn

  • Error while creating manual planned order in apo

    Dear expert
    While I am creating manual planned order i am getting error as message /sapapo/rrp251
    Every thing is correct BOM and PV's no error after consistency check and it getting succesfully transffered to APO and it is also visible in APO
    But while creating manual planned orders planned order are not getting generated  I am using BLock planning with PPDS
    Please help How to resolve it
    Regards
    Virender

    Hi
    The error message /SAPAPO/RRP251 - Error occurred while creating order means While creating an order, the system encountered problems, such as, for example, no available components or components that are available late, orders that could not be scheduled, and so on.
    I think system attempted to solve the availability problems by using alternative procurement options. This was not successful. The order could not be created. Check the exceptional situations in the planning protocol, under Goto -> Planning log, and deal with the causes of the exceptional situations if this is possible or necessary.
    Thanks
    Amol

  • Error while creating maintenance view

    Hi Freinds,
    I have 2 tables
    zemp and zdept and also i have defined foriegn key relationship between this two tables using a comman field DEPTNO. when i trying to create Maintenance View, its showing the following error
    *No database view exists for view ZMAINVIEW*_
    can any one help me how to solve thos problem
    thanks
    Sri

    Hi sri,
            First open se11 and go for views and select maintainence views and copy then it shows screen asking table name here first its enough if u specify one table and go for relationships then you can have pop up showing that what are the tables having relations wiht your basic table if it shows that 2 tables then it is correct if not something wrong in when you assigned foregin key to the table.
    with regards
    diwakar

  • Error while creating Maintenance order

    Hi,
    While creating Maintenance order with any order type (PM01,PM02 & PM03) & entering material in component Tab, the system is giving this Error 'Entry does not exist,check your entry'
    The used material is already maintained in the Material Master with all necessary information.
    Kindly suggest the best possible solution for this problem.
    Thanks in advance 
    Rohit8384

    Hi,
    The following error is coming while order processing.
    Entry    does not exist - check your entry
        Message no. 00 058
    Diagnosis
        Input values must be defined in Table MARA. The value or values '  ' are
        not specified in this table.
    Procedure
        Check whether the input is correct and correct if necessary.
    Procedure for System Administration
        If this is not an incorrect entry, check the system settings and change
        them if necessary.
        If there is a connection to the Customizing system, you can maintain the
        system settings by choosing Maintain entries (F5)
    Thanks in Advance.
    Rohit

  • Using Sets while creating a Plan Layout

    Hi All,
    Please let me know whether we can make use of sets while creating a planning layout using report painter.
    Thanks

    HI
    We can make use of sets while developing a planning layouts using report painter.
    Thanks
    Sandy
    Edited by: sandesh shetty on Feb 6, 2009 11:17 AM

Maybe you are looking for

  • Installed ios7 on iphone 4, now my phone wont turn on or recover?

    I downloaded ios 7 over night and it worked fine, but yesterday just turned off and wont turn on again. I connect it to a wall charger and the apple logo appears then goes off and this keeps repeating. I connected it to itunes doing the thing where y

  • Adobe AIR 3.7 - iOS run error

    Hi, I have set up a simple project to test the latest release of Adobe Air 3.7 which allow loading external swf with bytecode inside. The project use the krpano_as3_interface, load the main krpano.swf, and after a simple xml file. Building and runnin

  • HT4515 hi! I have a red dot on my phone and it is the first time I see it, why?

    Hi! I have a red dot on my iphone 5s and it is on the phone. Why?

  • Track down an INVALID COLUMN NAME.

    Hi, I have a SQL statement which contains a lot of column names and joins. There may be approx 150 column names in my Select clause. Now,when I run this in the User Env,i get the correct output. But when this is run in the Prod Env,I get the Error: E

  • My gift card got wet and the code peeled off

    i got my student itunes gift card and my mum spilt her drink from subway onto it, we later thought nothing of it and tryed to peel it off but however the code came with it. how do i still redeem the itunes voucher or get a new code? thanks