How to deliver multiple events (SWEQBROWSER)

Hello,
Through TCode SWEQBROWSER I can check that there are about 8000 events RECEIVED but not delivered. I need to deliver all this pending events.
However in this transaction i just can select one event at a time.
Is there anyway to deliver all this events in one shot?
Thanks in advance,
Pedro Leal

hi Pedro,
there is a job SWEQSRV automatically scheduled by transaction SWF_XI_CUSTOMIZING which purpose is to
manage the correct processing of the event queue - you can check it
using SWEQADM but SWF_XI_CUSTOMIZING should be enough
maybe this is not scheduled at your system ?
Regards,
Michal Krawczyk
http://mypigenie.com XI/PI FAQ

Similar Messages

** How to deliver multiple files using BPM (From RFC output)

Hi Friends,
I am doing File-RFC-File scenario using BPM. I am using BAPI_SFLIGHT_GETLIST as my RFC (Standard RFC). If we execute this RFC, it will return the results in tables form. Assume that, the inputs to RFC is like below.
FromCountryKey : US
FromCity: NEW YORK
ToCountryKey: DE
ToCity: FRANKFURT.
The outputs from the RFC is like below.
26 Entries
CAR
CONN
FLDATE
AIR
AIR
DEPTIME
SEATSMAX
SEATSOCC
|
DL
0106
19.05.2008
JFK
FRA
19:35:00
280
266
UA
3516
20.05.2008
JFK
FRA
16:20:00
380
364
LH
0401
23.05.2008
JFK
FRA
18:30:00
220
209
LH
0401
28.05.2008
JFK
FRA
18:30:00
220
208
UA
3516
28.05.2008
JFK
FRA
16:20:00
380
367
DL
0106
16.06.2008
JFK
FRA
19:35:00
280
261
UA
3516
17.06.2008
JFK
FRA
16:20:00
380
357
LH
0401
20.06.2008
JFK
FRA
18:30:00
220
213
DL
0106
14.07.2008
JFK
FRA
19:35:00
280
1
UA
3516
15.07.2008
JFK
FRA
16:20:00
380
86
LH
0401
18.07.2008
JFK
FRA
18:30:00
220
123
DL
0106
11.08.2008
JFK
FRA
19:35:00
280
56
UA
3516
12.08.2008
JFK
FRA
16:20:00
380
67
LH
0401
15.08.2008
JFK
FRA
18:30:00
220
114
DL
0106
08.09.2008
JFK
FRA
19:35:00
280
0
UA
3516
09.09.2008
JFK
FRA
16:20:00
380
164
LH
0401
12.09.2008
JFK
FRA
18:30:00
220
64
DL
0106
06.10.2008
JFK
FRA
19:35:00
280
80
UA
3516
07.10.2008
JFK
FRA
16:20:00
380
8
LH
0401
10.10.2008
JFK
FRA
18:30:00
220
16
DL
0106
03.11.2008
JFK
FRA
19:35:00
280
11
UA
3516
04.11.2008
JFK
FRA
16:20:00
380
33
LH
0401
07.11.2008
JFK
FRA
18:30:00
220
53
DL
0106
01.12.2008
JFK
FRA
19:35:00
280
0
UA
3516
02.12.2008
JFK
FRA
16:20:00
380
45
LH
0401
05.12.2008
JFK
FRA
18:30:00
220
25
|
We need to create output file for each record. In this case, the system should generate 26 output files.
I imported the RFC and created the required interfaces and designed BPM also.
Start --> Receive step --> Synchronous Send --> Asynchronous Send
But, I stuck in how to deliver each record to the output file from BPM.
Any idea, friends. (like using BPM Multi-line option. or 'Receiver From' property in the Send Step)
Kindly help me friends to solve this issue.
Thanking you.
Kind Regards,
Jeg P.

Hi
You can do it by creating one another message interface having structure same as your table.
What you have to do is create a mapping in such a way that for each record in table one message(newly created) must be created.
Use that mapping in an interface mapping, remember occurence of target message should be 0..Unbounded both in message mapping and interface mapping.
Now create one single line message and one multiline message in BPM for newly created message.Use transformation step with new interface mapping, mention source(RFC response) and target message(use multiline element of new message) for the transformation step.
Use send step inside a block,set block mode to "forEach", and attach new message to that send step.
Use multiline and single element of new message in the property window of block.
Now your BPM will look like
Start ---> Receiver ---> Synchronous send ---> Transformation ---> Block ---> Async Send(within block)
I think in this way you can implement what you want.
Regards
Sami
Reward points if helpful.

How to use multiple events on one project?

I want to make a show reel, this obviously involves using various events.
I'm worried if I do this the whole file system will be a mess. Surely I should be sopying any files I want to use into the new showreel folder?
How can i do this?
Or is using various events ok?
Hope someone ca recomend the best way forward

You can edit from any event into the project. There is no need to copy the clips into a new event. When you're done you can archive the used clips into a new event.

What/how to deliver multiple TOCs?

I'd like to use the first 'chapter/book' of my WebHelp (FH7) project as a Quick Start Guide and I think I can do it with a separate TOC.
I figured out how to do that part. But what I don't understand is, after I generate my project using the 2nd TOC, what/how do I deliver to the developers? They'll need both.

Hi again
Indeed it does mean you will end up with two different help systems. The name may be the same because you will place them in different folders.
You may wish to think about creating a merged setup. Fortunately, fellow Adobe Community Expert Peter Grainge has some excellent information on his site about all that.
Click here to visit Peter's site
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

How to delete multiple events in Ical that are already passed?

I've downloaded a fixtures calendar for a football season. (It's not a subscription, it's a calendar file). i've set preferences to delete events 1 day after they finish but old entries are still showing - as far back as 6 months. Is there a way to do a smart search or master delete that can delete all 'Done' events in a calendar? There are too many to keep selecting and deleting individually.
Thanks!

Thats a good tip Reggie.
For anyone else reading this post, keep in mind that if you see "duplicates" with the MobileMe calendar it may mean you are seeing two separate copies of the same calendar. Before spending time deleting individual events read this article: http://support.apple.com/kb/TS3505

DAQmx in Event structure / avoid multiple events

Hi all
I've started creating program for acquisition and analysis of data . I don't have much experience in LabVIEW, but it's important to me to start creating this application in good way. Can you give me some advice about things below?
I prepared template with Event structure, based on some article .
First question is how exactly place DAQmx blocks in it. Now they are all on one state of case structure "test", but I'm not sure that's correct because most of the example on NI side have initialization (like sample rate, number of saple) outside of the loop? It's important to make it possible to change parameter between measurements.
Second. How to avoid multiple events. In example: button TEST is pressed, measurement is taken. This measurement take a long time. I've started bored, and some other buttons (maybe TEST ) accidentally were pressed. When measurement is completed it would be good idea to destroy this events associated with accidently pressed buttons. It is possible to do it? What's the best way when there's a lot of buttons(when analysis part of program will be added)?
Best Regards
PS. sorry about my english
Attachments:
pgm.vi ‏33 KB
Enum_Events.ctl ‏5 KB

Dear Finch!
Welcome to NI Forums!
My first advice regarding your code would be to use shift registers instead of Queues as your state storage, since (as you've said) there is no reason to store multiple events that have happened. The state machine design pattern, which I strongly recommend in this scenario is built into LabVIEW, you can use it as a template if you go to the New.. menu.
Please check out these materials for further discussion about state machines.
You are correct in that most of the DAQmx VIs can be placed outside of the loop, only DAQmx Read (the function we actually use more then once) must be placed inside the loop, the rest can stay out. If you want to modify some parameters (like Timing) mid-execution, you only have to stop the task, set them, then start it again.
This can be easily done in a different state, which can execute only when some parameters have changed.
Also, if you want your user to be unable to interact with certain controls while the test is being taken, you can programmatically disable them with a Property Node.
Please get back to me if you have any other questions.
Best regards:
Andrew Valko
NI Hungary
Andrew Valko
National Instruments Hungary

How do I purchase photos from multiple events?

I want to purchase about 10 photos from multiple events. I can't seem to figure out how to make that happen so I am not spending 2.99 shipping for 2-3 photos from each event. How do you cluster them all for one shipping fee?
Thanks
Rojos

Make an album, drag the pics to that Album and use that for purchase.
Regards
TD

How to Update multiple items in other list using event handler?

Hi All,
If i update a item in a list, then i should update multiple items in another list need to be update. How to achive using event receivers?

Hi Sam,
According to your description, my understanding is that you want to update multiple items in another list when updated a list item.
In the event receiver, you can update the multiple item using Client Object Model.
Here is a code snippet for your reference:
public override void ItemUpdated(SPItemEventProperties properties)
string siteUrl = "http://sp2013sps/sites/test/";
ClientContext clientContext = new ClientContext(siteUrl);
List oList = clientContext.Web.Lists.GetByTitle("another list name");
ListItem oListItem = oList.GetItemById(1);
oListItem["Title"] = "Hello World Updated！";
oListItem.Update();
clientContext.ExecuteQuery();
Best regards,<o:p></o:p>
Zhengyu Guo
Zhengyu Guo
TechNet Community Support

How can I delete events, I keep getting multiple dates for an event, have deleted and then continue to re-appear. Any suggestions?

Birthdates entered into the calendar become multiple events. In one case it has repeated itself over 200 times. I have manually deleted these events at least 3 times and they continue to reappear. Any ideas how to correct?

One can delete it from one's computer. In the finder go to homeuser, movies, imovie events, delete the footage.
Then reopen iMovie and see if that helps.
Hugh

How do I select multiple events in iCal 8.0?

In OSX Mavericks, I used to be able to select multiple events in iCal in the event list view. I could select the initial event in the span of events to be selected. Then hold Shift while selecting the final even in the span of events. As a result, all of the events in that span would be selected.
in OSX Yosemite, this is no longer possible. There appears to be no list view, and holding the Shift button does not allow me to select a span of events.
What is the best way to select a span of events, say as much as 30 events?
Thank you.

Empty Caches
1. Safari > Preference > Advanced
    Checkmark the box for "Show Develop menu in menu bar".
    "Develop" menu will appear in the Safari menu bar.
    Click Develop and select "Empty Caches" from the dropdown.
2. Quit Safari if open.
    Option click the "Go" menu in the Finder menu bar.
    Select "Library" and then "Caches".
    Look for the folder 'com.apple.Safari"
    Right click "com.apple.Safari" and select "Move to Trash"
    Relaunch Safari.

How do I copy multiple events from a single calendar to another calendar?

I have multiple events from my "Family" calendar that I want to move. I would like to create a new calendar and move only specific events from my "Family" calendar to this new calendar. I have tried to select each event, then export, but this doesn't seem to work. It seems to export all events in the "Family" calendar, not just the ones that have been selected. Is there any way to do this aside from exporting each event one at a time and reimporting to a new calendar?

Drag them there. The volume they’re put onto needs to be formatted as Mac OS Extended.
(111592)

How do I delete multiple events in Calendar on iPhone or iCloud?

If I want to delete multiple events in Calendar on iPhone or iCloud, is there any way to do it?
I don't want to be clicking / tapping for hours...
Thank you!

Welcome to the Apple Community.
Unfortunately, I don't believe that's possible.

How do I split a single event with many clips into multiples events, one event per date?

I archived the video from my AVCHD camera into a Final Cut video archive. Later I imported this into iMovie. All the clips from this archive (spanning several months) are dumped into a single event. If I recall, older versions of iMovie would import video into separate events for each day. Then I would go through and give each event a meaningful name (e.g., "Mary's Birthday").
This is what I would like. Is there a way to split this very long event into multiple events, one for each day that is present in the event?

Not automatically but with imovie 10 you can create new events with any name you like then move clips into them from other events (Just like FCP 10.1). See:
http://help.apple.com/imovie/mac/10.0/#mov1d890f00b
You can also choose to display clips in an event grouped by date.
Geoff

[UIX] How To: Return multiple values from a LOV

Hi gang
I've been receiving a number of queries via email on how to return multiple items from a LOV using UIX thanks to earlier posts of mine on OTN. I'm unfortunately aware my previous posts on this are not that clear thanks to the nature of the forums Q&A type approach. So I thought I'd write one clear post, and then direct any queries to it from now on to save me time.
Following is my solution to this problem. Please note it's just one method of many in skinning a cat. It's my understanding via chatting to Oracle employees that LOVs are to be changed in a future release of JDeveloper to be more like Oracle Forms LOVs, so my skinning skills may be rather bloody & crude very soon (already?).
I'll base my example on the hr schema supplied with the standard RDBMS install.
Say we have an UIX input-form screen to modify an employees record. The employees record has a department_id field and a fk to the departments table. Our requirement is to build a LOV for the department_id field such that we can link the employees record to any department_id in the database. In turn we want the department_name shown on the employees input form, so this must be returned via the LOV too.
To meet this requirement follow these steps:
1) In your ADF BC model project, create 2 EOs for employees and departments.
2) Also in your model, create 2 VOs for the same EOs.
3) Open your employees VO and create a new attribute DepartmentName. Check selected in query. In expressions type (SELECT dept.department_name FROM departments dept WHERE dept.department_id = employees.department_id). Check Updateable always.
4) Create a new empty UIX page in your ViewController project called editEmployees.uix.
5) From the data control palette, drag and drop EmployeesView1 as an input-form. Notice that the new field DepartmentName is also included in the input-form.
6) As the DepartmentName will be populated either from querying existing employees records, or via the LOV, disable the field as the user should not have the ability to edit it.
7) Select the DepartmentId field and delete it. In the UI Model window delete the DepartmentId binding.
8) From the data controls palette, drag and drop the DepartmentId field as a messageLovInput onto your page. Note in your application navigator a new UIX page lovWindow0.uix (or similar) has been created for you.
9) While the lovWindow0.uix is still in italics (before you save it), rename the file to departmentsLov.uix.
10) Back in your editEmployees.uix page, your messageLovInput source will look like the following:
<messageLovInput
    model="${bindings.DepartmentId}"
    id="${bindings.DepartmentId.path}"
    destination="lovWindow0.uix"/>Change it to be:
<messageLovInput
    model="${bindings.DepartmentId}"
    id="DepartmentId"
    destination="departmentsLov.uix"
    partialRenderMode="multiple"
    partialTargets="_uixState DepartmentName"/>11) Also change your DepartmentName source to look like the following:
<messageTextInput
    id=DepartmentName
    model="${bindings.DepartmentName}"
    columns="10"
    disabled="true"/>12) Open your departmentsLov.uix page.
13) In the data control palette, drag and drop the DepartmentId field of the DepartmentView1 as a LovTable into the Results area on your page.
14) Notice in the UI Model window that the 3 binding controls have been created for you, an iterator, a range and a binding for DepartmentId.
15) Right click on the DepartmentsLovUIModel node in the UI Model window, then create binding, display, and finally attribute. The attribute binding editor will pop up. In the select-an-iterator drop down select the DepartmentsView1Iterator. Now select DepartmentName in the attribute list and then the ok button.
16) Note in the UI Model you now have a new binding called DCDefaultControl. Select this, and in the property palette change the Id to DepartmentName.
17) View the LOV pages source, and change the lovUpdate event as follows:
<event name="lovSelect">
    <compound>
        <set value="${bindings.DepartmentId.inputValue}" target="${sessionScope}" property="MyAppDepartmentId" />
        <set value="${bindings.DepartmentName.inputValue}" target="${sessionScope}" property="MyAppDepartmentName" />
    </compound>
</event>18) Return to editEmployees.uix source, and modify the lovUpdate event to look as follows:
<event name="lovUpdate">
    <compound>
        <set value="${sessionScope.MyAppDepartmentId}" target="${bindings.DepartmentId}" property="inputValue"/>
        <set value="${sessionScope.MyAppDepartmentName}" target="${bindings.DepartmentName}" property="inputValue"/>
    </compound>
</event>Thats it. Now when you select a value in your LOV, it will return 2 (multiple!) values.
A couple things to note:
1) In the messageLovInput id field we dont use the .path notation. This is mechanism for returning 1 value from the LOV and is useless for us.
2) Again in the messageLovInput we supply _uixState as an entry in the partialTargets.
3) We are relying on partial-page-refresh functionality to update multiple items on the screen.
Im not going to take the time out to explain these 3 points, but its worthwhile you learning more about them, especially the last 2, as a separate exercise.
One other useful thing to do is, in your messageLovInput, include as a last entry in the partialTargets list MessageBox. In turn locate the messageBox control on your page (if any), and supply an id=MessageBox. This will allow the LOV to place any errors raised in the MessageBox and show them to the user.
I hope this works for you :)
Cheers,
CM.

Thanks Chris,
It took me some time to find the information I needed, how to use return multiple values from a LOV popup window, then I found your post and all problems were solved. Its working perfectly, well, almost perfectly.
Im always fighting with ADF-UIX, it never does the thing that I expect it to do, I guess its because I have a hard time letting go of the total control you have as a developer and let the framework take care of a few things.
Anyway, I'm using your example to fill 5 fields at once, one of the fields being a messageChoice (a list with countries) with a LOV to a lookup table (id , country).
I return the countryId from the popup LOV window, that works great, but it doesn't set the correct value in my messageChoice . I think its because its using the CountryId for the listbox index.
So how can I select the correct value inside my messageChoice? Come to think of it, I dont realy think its LOV related...
Can someone help me out out here?
Kind regards
Ido

How to apply multiple automator workflows to one file

Hi everyone,
I've set up a few workflow applications to automate the process of making packshots from PDF files. The way those roughly work is they create a temporary copy in a folder, open a Photoshop droplet that executes all the actions on the file, and then save the finished product in a "finished" folder.
However, we frequently need to deliver multiple packshots made from the same file. I was asked to make one automator app that allowed us to drop the PDF version on it, resulting in the multiple types of packshots in the "finished" folder, together with the original PDF.
The way I have this set up right now is as follows:
1) Copy the original PDF file to the "finished" folder
2) Execute the first automator app
3) Execute the second automator app
This seems simple enough, and does work in 10.6.8. When I try it on a different computer in our studio though, with 10.7 installed, I get various errors:
- Sometimes it says an error occured within one of the automator apps, while the app works fine when running it seperately (on all computers).
- Sometimes it says something like "An error occurred while converting the data" when moving on from the first application to the second application
- Sometimes I'll get an error message in the log, saying:
*** -[_NSArrayl objectAtIndex:]: index 0 beyond bounds for empty array
What I got from this is that it's actually not getting the right input it requires (or not getting any input, since it's an empty array). However, the previous task is set to "return the task input" (our systems are Dutch so excuse me for any discrepancies in translations please), and the resulting output that I get seems to be what I want the next automator application to use. Below is a screenshot of the error message:
What I've tried:
- I read somewhere that the newer versions of Automator require the action "Retrieve selected finder items" between them. I've tried using this in various ways (between all other actions/tasks, only before the second application to be run and before both applications to be run), but with no success. The problem I have with these is that, during the applications, it moves the files around, thus apparently selecting those folders as well.
- Building an entirely new workflow on the newer system
- Using "Start application" instead of "Execute Automator workflow". This results in Automator saying that it did execute the workflow while nothing happened.
- Using "Ignore input" for the second application. This also results in Automator saying that it executed the workflow while nothing happened.
So right now, I'm pretty stumped as to how to get this combination of apps to work in 10.7. Any solutions or workarounds are most welcome.
Thanks in advance!

Yes, angelanna. You can merge or split your video file via FCP sequence.
ahaah, maybe I think angelanna would like to get the resulting file with MTS format because he mentioned “No need to be compressed”. Are you asking for this, angelanna?
If so, a simple MTS files managing and editing tool is needed. Maybe you can have a try the Mac version of Aunsoft Final Mate for managing HD camcorder footages. I just downloaded its free trial version and it offers a simple way of garping footages directly from camcorder. And also it provides a attractive feature to join flawlessly and split accurately native MTS files for video file output with original MTS format.
Maybe this is the tool cwhich an help you out, angelanna.
Enjoy your video.

How to deliver multiple events (SWEQBROWSER)

Similar Messages

Maybe you are looking for