How to deploy my oracle 10g application ?

I have finished my application which was built using
* Oracle database 10g
* Oracle Developer 10g
So now how can I {color:#ff0000}*deploy*{color} it to enable clients to access it..?
Thanks in advance..

S_Ashour wrote:
I have finished my application which was built using
* Oracle database 10g
* Oracle Developer 10g
So now how can I {color:#ff0000}*deploy*{color} it to enable clients to access it..?
Thanks in advance..Depends on where you want it deployed, if it's a large application and you want the users to access over the internet, you need to use OAS (Oracle Application Server) and configure the server and provide the URL to the users.
If it's only for testing and couple of users, you can TRY to run it just with OC4J and the URL to your forms.
In any case users should Install JInitiator for the first time they run the application only.
Tony

Similar Messages

Deployment of Oracle 10g Application on oracle 10g application server

Sir,
I am new in this forum. Please guide me how to deploy oracle 10g application on oracle 10g application server.

Dear Ghulam,
1)Create A new OC4j instance on Oracle 10g Application Server
2)Deploy ur war or ear file accordingly on this OC4J.
3)Create the datasource ie connection of application with the database
4)Tune your Java Parameters inside the OC4J for better performance.
The details of this is explained on the above post ie two link.
Regards
Fabian

Deploying to Oracle 10g Application Server

Is it possible to deploy a web application developed using Sun Java Studio Creator to Oracle 10 Application Server?
Any help is highly appreciable.
Thanks

See a couple of entries at
http://blogs.sun.com/marcoscorner
I hope they help you;-)
Thanks,
-- Marco

Classpath problem during deployment in oracle 10g application server

java.lang.NoClassDefFoundError: oracle/toplink/sessions/UnitOfWork
     at java.lang.Class.forName0(Native Method)
     at java.lang.Class.forName(Class.java:219)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpApplication.loadServlet(HttpApplication.java:2028)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpApplication.findServlet(HttpApplication.java:4523)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpApplication.getRequestDispatcher(HttpApplication.java:2561)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:640)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:208)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:125)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
     at java.lang.Thread.run(Thread.java:534)
required urgent help.

hello,
when you deploy reports JSPs they still require the reports specific componentes (e.g. TLD file, classes, ...) etc be available. i doubt that's the case in your ear file.
thanks,
ph.

Facing issue while deploying in oracle 10G application server

java.lang.NoClassDefFoundError
     at com.sun.xml.ws.wsdl.parser.RuntimeWSDLParser.parseBinding(RuntimeWSDLParser.java:460)
     at com.sun.xml.ws.wsdl.parser.RuntimeWSDLParser.parseWSDL(RuntimeWSDLParser.java:357)
     at com.sun.xml.ws.wsdl.parser.RuntimeWSDLParser.parse(RuntimeWSDLParser.java:172)
     at com.sun.xml.ws.wsdl.parser.RuntimeWSDLParser.parse(RuntimeWSDLParser.java:135)
     at com.sun.xml.ws.client.WSServiceDelegate.parseWSDL(WSServiceDelegate.java:275)
     at com.sun.xml.ws.client.WSServiceDelegate.<init>(WSServiceDelegate.java:238)
     at com.sun.xml.ws.client.WSServiceDelegate.<init>(WSServiceDelegate.java:186)
     at com.sun.xml.ws.spi.ProviderImpl.createServiceDelegate(ProviderImpl.java:111)
     at javax.xml.ws.Service.<init>(Service.java:56)

Hi Ahmed,
It sounds you have not yet had the chance to lay eyes on the installation guides - they are not perfect but should point you in the right direction.
Please start at http://www.oracle.com/technetwork/documentation/oracle-retail-100266.html and check out the install guide per application module.
Best regards,
Erik

Deployment of class file in oracle 10g Application Server

Hi,
I have a class file
import java.io.*;
import javax.servlet.*;
import javax.servlet.http.*;
public class HelloWorld extends HttpServlet {
public void doGet(HttpServletRequest req, HttpServletResponse res)
throws ServletException, IOException {
res.setContentType ("text/html");
PrintWriter out = res.getWriter();
out.println("<HTML>");
out.println("<HEAD><TITLE>Hello World</TITLE></HEAD>");
out.println("<BODY>");
out.println("<BIG>Hello World</BIG>");
out.println("</BODY></HTML>");
now I like to deploy(in oracle 10g Application Server) and run this file.
please help me.

Hi
You have to deploy Servlet as a WAR File. I hope you already have web.xml file which u can get automatically in eclsipse during creation of servelet. I am not sure what ide u r using here. If u have created servlet in eclipse then I would suggest create a project dynamic webproject if u have not where IDE create all required files autmatiicaly and even you can deploy application from there itself.
If you wanted to deploy manually then follow below steps (if u have war file)
I am assuming you already created a Weblogic Domain and have admin username/password. Start your domain. Login into weblogic console like http://host:port/console and use admin username/password. Then from Deployments section, deploy the above WAR file. In Weblogic you can deploy JAR (EJBs, java files), WAR (web jsp, html, webservices, servlets) or EAR (JAR + WAR). In your case its just a WAR file.
Thanks
Sujit Singh

Automation of deployment on Oracle 10g App Server

Hi,
Iam trying for automation of deployment on Oracle 10g Application Server.
Oracle 10g (10.1.3.1.0) ant-oracle-classes.jar
Any pointers for the same will be very very helpful.
I googled for the documentation of [i]ant-oracle-classes.jar. But could not get any valid results. Can someone please help me out.
If anyone has used/implemented the automation either thru Ant Tasks or J2EE Deployment API.
Iam kinda badly stuck and Iam not getting any kind of help in Oracle Forums or even by googling, please please help me out.
Regards,
Prashanth Babu.

Duplicate post:
Oracle 10g App Server
regards

How to deploy the Oracle Forms and Reports 10g in Web?

Currently I am working in Oracle forms & Reports conversion project (6i to 10g).
As of now 6i forms working as a standalone application. After migrated it to 10g, I need to deploy the forms and reports in web.
Any one know how to deploy the Oracle forms and Reports in web?
Please help me out. Thanks in advance.
Vimal

Hello Frank,
for development, you need to install Oracle Developer
Suite 10g. This includes Forms and Reports.this topic interests me too, because I've downloaded Developer Suite and Database (both for 10g) from Oracle website, installed them, but I couldn't connect to a database.
What should be done for me to create a database link and be able to connect locally, in my personal Desktop computer? (Not to a server)
Once it was told me here that I should download 10g Database - I did it, and installed it, but it didn't work. Later, some of my job partners said I should install them in a sequence - that is, 1st the Developer, and 2nd the Database. But it has failed too. And I don't know how to configure a database connection.
Best regards,

Deploying Oracle Retail Applications in Oracle 10g Application Server

Hi All..
Can anyone help me to know:
How to Deploy Oracle Retail Applications(like RMS,ReIM,RIB) in Oracle 10g Application Server.
Regards.

Hi Ahmed,
It sounds you have not yet had the chance to lay eyes on the installation guides - they are not perfect but should point you in the right direction.
Please start at http://www.oracle.com/technetwork/documentation/oracle-retail-100266.html and check out the install guide per application module.
Best regards,
Erik

How to run oracle 10g application on firefox browser.

my oracle 10g application is running on Internet Explorer ,but when i run it on firefox (installed on windows and linux) raise an error...
can any one tell me the configuration...

When using Firefox Browser 3.0.x, you have to manually install the java plugin on your pc and copy the NPJPI150_xx.dll to the plugin directory of Firefox.
Make sure, that you use exactly the same version, as you named in your formsweb.cfg configuration.
In my case, were we use Java Plugin 1.5.0_06, I have these linse in my formsweb.cfg file:
# For Firefox:
jpi_mimetype=application/x-java-applet;jpi-version=1.5.0_06
# For IE:
jpi_classid=clsid:CAFEEFAC-0015-0000-0006-ABCDEFFEDCBA
Good luck

Admin error after deploying to Oracle 10g

I'm trying to deploy Coldfusion 7.02 to Oracle 10g
Application Server. I successfully installed CF as an ear file and
deployed it to my OC4J instance. However, when I try to run the
Administrator, after logging in, I get this error message:
java.lang.ExceptionInInitializerError
at com.verity.administration.VAdmin.<init>(Unknown
Source)
at
com.verity.api.administration.VAdministration.<init>(Unknown
Source).
Caused by: java.lang.RuntimeException: Encryption algorithm
not found
at com.verity.security.k2.K2Encrypt.<clinit>(Unknown
Source)
... 54 more
Any idea what this has to do with? One thing I have been told
is that this may have to do with ColdFusion needing to be run on
its own OC4J instance. I am still working on figuring out how to do
that setup.
Any help would be appreciated.
Thanks.

See a couple of entries at
http://blogs.sun.com/marcoscorner
I hope they help you;-)
Thanks,
-- Marco

Urgent: problem running reports in Oracle 10g application server

Hi all,
our problem is that we deployed a jsp report as Ear file in Oracle 10g application server in infrastructure node.deployment says successfull.when we try to run that report it says 401 unauthorised.while sending request we are passing the database username,password &sid is this correct or any configuration setting to be done to make it run.
one morething normal jsp works fine.when we run reports jsp it gives the above mentioned 401 error.

hello,
when you deploy reports JSPs they still require the reports specific componentes (e.g. TLD file, classes, ...) etc be available. i doubt that's the case in your ear file.
thanks,
ph.

Auditing in oracle 10g database and oracle 10g application server

Dear friends,
We have oracle 10g application server and oracle 10g database server in place.My criteria is to audit users connected using oracle application user credentials to the database.
Can you please tell me how can i do it.
Thanks & regards,

Its the database connection you want to track. The session audit will show where it came from.
Auditing is turned using this command:
alter system set audit_trail = DB scope=spfile;
Note: The use of spfile will require a DB bounce before audit starts
To audit Sessions:
audit create session;
Query by Audit Type:
SELECT A.USERNAME,
OS_USERNAME,
A.TIMESTAMP,
A.RETURNCODE,
TERMINAL,
USERHOST
FROM DBA_AUDIT_SESSION A
WHERE USERHOST = <replace with iAS servername> ;
By User
SELECT USERNAME,OBJ_NAME,ACTION_NAME , TIMESTAMP
FROM DBA_AUDIT_TRAIL WHERE USERNAME = 'SCOTT';
Check for users sharing database accounts
select count(distinct(terminal)),username
from dba_audit_session
having count(distinct(terminal))>1
group by username;
Attempts to access the database at unusual hours
SELECT username, terminal, action_name, returncode,
TO_CHAR (TIMESTAMP, 'DD-MON-YYYY HH24:MI:SS'),
TO_CHAR (logoff_time, 'DD-MON-YYYY HH24:MI:SS')
FROM dba_audit_session
WHERE TO_DATE (TO_CHAR (TIMESTAMP, 'HH24:MI:SS'), 'HH24:MI:SS') <
TO_DATE ('08:00:00', 'HH24:MI:SS')
OR TO_DATE (TO_CHAR (TIMESTAMP, 'HH24:MI:SS'), 'HH24:MI:SS') >
TO_DATE ('19:30:00', 'HH24:MI:SS');
Attempts to access the database with non-existent users
SELECT username, terminal, TO_CHAR (TIMESTAMP, 'DD-MON-YYYY HH24:MI:SS')
FROM dba_audit_session
WHERE returncode <> 0
AND NOT EXISTS (SELECT 'x'
FROM dba_users
WHERE dba_users.username = dba_audit_session.username);
Other audits you might consider:
audit grant any object privilege;
audit alter user;
audit create user;
audit drop user;
audit drop tablespace;
audit grant any role;
audit grant any privilege;
audit alter system;
audit alter session;
audit delete on AUD$ by access;
audit insert on AUD$ by access;
audit update on AUD$ by access;
audit delete table;
audit create tablespace;
audit alter database;
audit create role;
audit create table;
audit alter any procedure;
audit create view;
audit drop any procedure;
audit drop profile;
audit alter profile;
audit alter any table;
audit create public database link;
Best Regards
mseberg

Apply patch 10.1.2.3 on oracle 10g application server 10.1.2.0.2

Dear All,
i have installed oracle 10g application server 10.1.2.0.2 with infrastructure and forms & report.
now i downloaded the patch 10.1.2.3 to apply on it.
I have two homes in my application 10g server (infra and forms&report).
should first i apply apply patch on infrastructure and than on forms & report home.
am i correct.? can you please give me procedure how to apply the patch on 10g application server 10.1.2.0.2.
Thanks & regards,
Sher khan

Hi,
can you please correct me in sequence..
1) install oracle 10g application server including
i) infrastructure
2) install forms and report.
3) apply patch 10.1.2.3 on application server
3.1) apply patch on forms and report
3.2) than apply patch on infrastructure..
is it correct sequence thanks,
Thanks & regards,
Sher khan

Oracle 10g application seerver

hi guys
i am using oracle 10g application to deploy my war
but when i am using session.getattribute
and getting it ,it is not working first time
next time when i am refreshing the page
it is working properly
and it is working in oracle9i application very well
but not working in 10g application server
plz help

smogura.eu wrote:
If
session.getAttribute("username");returns null, this means you have valid session (session object exists, because you invoke getAttribute on them and getAttribute doesn't throws exception).It never throws an exception, so I don't know what you're babbling about.
Maybe you mean NullPointerException on accessing 'session'? That would only occur if you get the session by request.getSession(false) during a request which doesn't have an associated session yet, it would then return null. But that's obvious. The topicstarter also vaguely mentioned "i am using session = true" which less or more indicates that he is using request.getSession(true).
At any way, if getAttribute() returns null, it can have 3 causes:
1) setAttribute() is never called.
2) setAttribute() is called with null value.
3) there's means of a different session.
Simple as that.

How to deploy my oracle 10g application ?

Similar Messages

Maybe you are looking for