How to deploy "private" interactive sales material to iPad

I have been strugiling to find a way to use all the interactivity of indesigns foilos in our sales material for private us. I need to distribute in a secure manner sales material to my sales guys everywhere. But cant use DPS unless I pay a ton of money which would be over kill. I just want to use all the interactive features in indesign to make and deploy sales materials to certian sales people. (what are my choices not paying?) Ive read a few things about using acrobat workspace to share folios, but is that secure?
Or is there other applications that I could use to design such interactivity as indesigns foilis and deploy it to iPads as well as make updates? like edge animate or dreamweaver?

I am not sure I fully understand the question but I will attempt to offer some guidance and hope that it at least answers part of your query.
For transferring of files to all users on an iPad, you could use a Dropbox or iCloud account. You would basically create one login and each iPad would connect using the same account.
Depending on what interactive features from InDesign you use, you could export as an Interactive PDF for transfer. You can then add password security to this PDF so that no-one can open it without the password. This can be done in Acrobat.
Hope it helps.
Rik

Similar Messages

How can video of interactive pdf show on Ipad?

Created an interactive pdf in InDesign with a video at the end, H.264 mp4 for Ipad size. THe video will show on the computer but will not show on the Ipad. Downloaded Adobe Reader 10.3 it can see it but will not play. Any ideas of how to get the video to show in the interactive pdf on Ipad?

Adobe Reader 10.3 does not yet support multimedia. None of the free readers I've found support it.
The best PDF reader I've found for the iPad is not free, $US9.99: PDF Expert. It supports multimedia.

How to view an Interactive PDF on an iPad?

My PDF uses three types of buttons: (1) buttons that go to next/previous or a desination page; (2) Buttons that show or hide other buttons – all of these are generated entirely from InDesign and, (3) Layer visibility buttons - which are created in InDesign, but the button Action is set in Acrobat. These buttons require Acrobat layers.
I have seen recommendations for other PDF viewers – such as GoodReader – but GoodReader does not support layers. Is there a Viewer that does? Like Acrobat, but that works with iPads?!
Or do I need to export to another format? Or re-create my document in another format? InDesign Folios do not support the buttons I am using; SWF files do not support layers... sigh.
I don't need to send the PDF to other iPads, only view it. (The Document is an interactive company presentation - my boss goes to a lot of conferences and he wants to be able to present to clients from his iPad.)
Anyone got any bright ideas?!

Sadly, Adobe Reader doesn't support playing videos. You'll need to purchase a better PDF reader, notably PDF Expert from Readdle. US $9.99.

How to devolped an Interactive ALV Report to display sales orders

hi,
how to devolped an Interactive ALV Report to display sales orders pertaining to the selected Customers and item details in the secondary list.For this report what are the tables and fields wehave to used give with example.
thank you
radhakrishna

Hi,
look via se38 for BCALV* and SALV*.
Try ABAPDOCU.
Regards, Dieter

HOW TO DEVELOP AN INTERACTIVE REPORT

HI,
     How to Develop an interactive report to display sales orders for particular customer, items for particular order.

Hi,
Look at the below sample Program for the Interactive ALV report.
*& Report Z_INTERACTIVE_ALV3                                          *
report z_interactive_alv4    no standard page heading line-size 650
message-id zz_9838                      .
type-pools: slis.
*type declaration for values from ekko
types: begin of i_ekko,
       ebeln like ekko-ebeln,
       aedat like ekko-aedat,
       bukrs like ekko-bukrs,
       bsart like ekko-bsart,
       lifnr like ekko-lifnr,
       end of i_ekko.
data: it_ekko type standard table of i_ekko initial size 0,
      wa_ekko type i_ekko.
*type declaration for values from ekpo
types: begin of i_ekpo,
       ebeln like ekpo-ebeln,
       ebelp like ekpo-ebelp,
       matnr like ekpo-matnr,
       menge like ekpo-menge,
       meins like ekpo-meins,
       netpr like ekpo-netpr,
       end of i_ekpo.
data: it_ekpo type standard table of i_ekpo initial size 0,
      wa_ekpo type i_ekpo .
*variable for Report ID
data: v_repid like sy-repid .
*declaration for fieldcatalog
data: i_fieldcat type slis_t_fieldcat_alv,
      wa_fieldcat type slis_fieldcat_alv.
data: it_listheader type slis_t_listheader.
declaration for events table where user comand or set PF status will
be defined
data: v_events type slis_t_event,
      wa_event type slis_alv_event.
declartion for layout
data: alv_layout type slis_layout_alv.
declaration for variant(type of display we want)
data: i_variant type disvariant,
      i_variant1 type disvariant,
      i_save(1) type c.
*PARAMETERS : p_var TYPE disvariant-variant.
*Title displayed when the alv list is displayed
data: i_title_ekko type lvc_title value 'FIRST LIST DISPLAYED'.
data: i_title_ekpo type lvc_title value 'SECONDRY LIST DISPLAYED'.
initialization.
v_repid = sy-repid.
perform build_fieldcatlog.
perform event_call.
perform populate_event.
start-of-selection.
perform data_retrieval.
perform build_listheader using it_listheader.
perform display_alv_report.
*&      Form BUILD_FIELDCATLOG
      Fieldcatalog has all the field details from ekko
form build_fieldcatlog.
wa_fieldcat-tabname = 'IT_EKKO'.
wa_fieldcat-fieldname = 'EBELN'.
wa_fieldcat-seltext_m = 'PO NO.'.
append wa_fieldcat to i_fieldcat.
clear wa_fieldcat.
wa_fieldcat-tabname = 'IT_EKKO'.
wa_fieldcat-fieldname = 'AEDAT'.
wa_fieldcat-seltext_m = 'DATE.'.
append wa_fieldcat to i_fieldcat.
clear wa_fieldcat.
wa_fieldcat-tabname = 'IT_EKKO'.
wa_fieldcat-fieldname = 'BUKRS'.
wa_fieldcat-seltext_m = 'COMPANY CODE'.
append wa_fieldcat to i_fieldcat.
clear wa_fieldcat.
wa_fieldcat-tabname = 'IT_EKKO'.
wa_fieldcat-fieldname = 'BUKRS'.
wa_fieldcat-seltext_m = 'DOCMENT TYPE'.
append wa_fieldcat to i_fieldcat.
clear wa_fieldcat.
wa_fieldcat-tabname = 'IT_EKKO'.
wa_fieldcat-fieldname = 'LIFNR'.
wa_fieldcat-no_out    = 'X'.
wa_fieldcat-seltext_m = 'VENDOR CODE'.
append wa_fieldcat to i_fieldcat.
clear wa_fieldcat.
endform.                    "BUILD_FIELDCATLOG
*&      Form EVENT_CALL
we get all events - TOP OF PAGE or USER COMMAND in table v_events
form event_call.
call function 'REUSE_ALV_EVENTS_GET'
   exporting
     i_list_type           = 0
   importing
     et_events             = v_events
EXCEPTIONS
   LIST_TYPE_WRONG       = 1
   OTHERS                = 2
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform.                    "EVENT_CALL
*&      Form POPULATE_EVENT
     Events populated for TOP OF PAGE & USER COMAND
form populate_event.
read table v_events into wa_event with key name = 'TOP_OF_PAGE'.
if sy-subrc eq 0.
    wa_event-form = 'TOP_OF_PAGE'.
    modify v_events from wa_event transporting form where name =
wa_event-form.
endif.
read table v_events into wa_event with key name = 'USER_COMMAND'.
if sy-subrc eq 0.
    wa_event-form = 'USER_COMMAND'.
    modify v_events from wa_event transporting form where name =
wa_event-name.
endif.
endform.                    "POPULATE_EVENT
*&      Form data_retrieval
retreiving values from the database table ekko
form data_retrieval.
select ebeln aedat bukrs bsart lifnr from ekko into table it_ekko.
endform.                    "data_retrieval
*&      Form bUild_listheader
      text
     -->I_LISTHEADEtext
form build_listheader using i_listheader type slis_t_listheader.
data hline type slis_listheader.
hline-info = 'this is my first alv pgm'.
hline-typ = 'H'.
endform.                    "build_listheader
*&      Form display_alv_report
      text
form display_alv_report.
v_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
   exporting
     i_callback_program                = v_repid
I_CALLBACK_PF_STATUS_SET          = ' '
     i_callback_user_command           = 'USER_COMMAND'
     i_callback_top_of_page            = 'TOP_OF_PAGE'
     i_grid_title                      = i_title_ekko
I_GRID_SETTINGS                   =
IS_LAYOUT                         = ALV_LAYOUT
     it_fieldcat                       = i_fieldcat[]
IT_EXCLUDING                      =
IT_SPECIAL_GROUPS                 =
IT_SORT                           =
IT_FILTER                         =
IS_SEL_HIDE                       =
    i_default                         = 'ZLAY1'
     i_save                            = 'A'
    is_variant                        = i_variant
     it_events                         = v_events
    tables
      t_outtab                          = it_ekko
EXCEPTIONS
PROGRAM_ERROR                     = 1
OTHERS                            = 2
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform.                    "display_alv_report
*&      Form TOP_OF_PAGE
      text
form top_of_page.
call function 'REUSE_ALV_COMMENTARY_WRITE'
    exporting
      it_list_commentary       = it_listheader
   i_logo                   =
   I_END_OF_LIST_GRID       =
endform.                    "TOP_OF_PAGE
*&      Form USER_COMMAND
      text
     -->R_UCOMM    text
     -->,          text
     -->RS_SLEFIELDtext
form user_command using r_ucomm like sy-ucomm
rs_selfield type slis_selfield.
case r_ucomm.
    when '&IC1'.
      read table it_ekko into wa_ekko index rs_selfield-tabindex.
      perform build_fieldcatlog_ekpo.
      perform event_call_ekpo.
      perform populate_event_ekpo.
      perform data_retrieval_ekpo.
      perform build_listheader_ekpo using it_listheader.
      perform display_alv_ekpo.
endcase.
endform.                    "user_command
*&      Form BUILD_FIELDCATLOG_EKPO
      text
form build_fieldcatlog_ekpo.
wa_fieldcat-tabname = 'IT_EKPO'.
wa_fieldcat-fieldname = 'EBELN'.
wa_fieldcat-seltext_m = 'PO NO.'.
append wa_fieldcat to i_fieldcat.
clear wa_fieldcat.
wa_fieldcat-tabname = 'IT_EKPO'.
wa_fieldcat-fieldname = 'EBELP'.
wa_fieldcat-seltext_m = 'LINE NO'.
append wa_fieldcat to i_fieldcat.
clear wa_fieldcat.
wa_fieldcat-tabname = 'I_EKPO'.
wa_fieldcat-fieldname = 'MATNR'.
wa_fieldcat-seltext_m = 'MATERIAL NO.'.
append wa_fieldcat to i_fieldcat.
clear wa_fieldcat.
wa_fieldcat-tabname = 'I_EKPO'.
wa_fieldcat-fieldname = 'MENGE'.
wa_fieldcat-seltext_m = 'QUANTITY'.
append wa_fieldcat to i_fieldcat.
clear wa_fieldcat.
wa_fieldcat-tabname = 'I_EKPO'.
wa_fieldcat-fieldname = 'MEINS'.
wa_fieldcat-seltext_m = 'UOM'.
append wa_fieldcat to i_fieldcat.
clear wa_fieldcat.
wa_fieldcat-tabname = 'I_EKPO'.
wa_fieldcat-fieldname = 'NETPR'.
wa_fieldcat-seltext_m = 'PRICE'.
append wa_fieldcat to i_fieldcat.
clear wa_fieldcat.
endform.                    "BUILD_FIELDCATLOG_EKPO
*&      Form event_call_ekpo
we get all events - TOP OF PAGE or USER COMMAND in table v_events
form event_call_ekpo.
call function 'REUSE_ALV_EVENTS_GET'
   exporting
     i_list_type           = 0
   importing
     et_events             = v_events
EXCEPTIONS
LIST_TYPE_WRONG       = 1
OTHERS                = 2
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform.                    "event_call_ekpo
*&      Form POPULATE_EVENT
       Events populated for TOP OF PAGE & USER COMAND
form populate_event_ekpo.
read table v_events into wa_event with key name = 'TOP_OF_PAGE'.
if sy-subrc eq 0.
    wa_event-form = 'TOP_OF_PAGE'.
    modify v_events from wa_event transporting form where name =
wa_event-form.
endif.
endform.                    "POPULATE_EVENT
*&      Form TOP_OF_PAGE
      text
form f_top_of_page.
call function 'REUSE_ALV_COMMENTARY_WRITE'
    exporting
      it_list_commentary       = it_listheader
   i_logo                   =
   I_END_OF_LIST_GRID       =
endform.                    "TOP_OF_PAGE
*&      Form USER_COMMAND
      text
     -->R_UCOMM    text
     -->,          text
     -->RS_SLEFIELDtext
*retreiving values from the database table ekko
form data_retrieval_ekpo.
select ebeln ebelp matnr menge meins netpr from ekpo into table it_ekpo.
endform.
form build_listheader_ekpo using i_listheader type slis_t_listheader.
data: hline1 type slis_listheader.
hline1-typ = 'H'.
hline1-info = 'CHECKING PGM'.
endform.
form display_alv_ekpo.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
I_INTERFACE_CHECK                 = ' '
I_BYPASSING_BUFFER                = ' '
I_BUFFER_ACTIVE                   = ' '
   i_callback_program                = v_repid
I_CALLBACK_PF_STATUS_SET          = ' '
I_CALLBACK_USER_COMMAND           = 'F_USER_COMMAND'
   i_callback_top_of_page            = 'TOP_OF_PAGE'
I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
I_CALLBACK_HTML_END_OF_LIST       = ' '
I_STRUCTURE_NAME                  =
I_BACKGROUND_ID                   = ' '
   i_grid_title                      = i_title_ekpo
I_GRID_SETTINGS                   =
IS_LAYOUT                         =
   it_fieldcat                       = i_fieldcat[]
IT_EXCLUDING                      =
IT_SPECIAL_GROUPS                 =
IT_SORT                           =
IT_FILTER                         =
IS_SEL_HIDE                       =
I_DEFAULT                         =
   i_save                            = 'A'
IS_VARIANT                        =
   it_events                         = v_events
tables
    t_outtab                          = it_ekpo
exceptions
   program_error                     = 1
   others                            = 2
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform.
Regards,
Ram
Reward points if helpful

[Forum FAQ] How to deploy applications remotely

In some situations, we may need some ways to install applications remotely, here we summarize four general ways to deploy applications.
1. Using PowerShell to install
We can use the Win32_Product class to install Windows Installer packages, remotely or locally, so in this way, we can use powerShell command to invoke this function. For example, to install the NewPackage.msi package located in the network
share \\AppServ\remote on the remote computer PC01, type the following command at the Windows PowerShell prompt:
(Get-WMIObject -ComputerName PC01 -List | Where-Object -FilterScript {$_.Name -eq "Win32_Product"}).Install(\\AppSrv\remote\NewPackage.msi)
In same method, we can use the following command to deploy .exe application:
(Get-WMIObject -ComputerName PC01 -List | Where-Object -FilterScript {$_.Name -eq "Win32_Process"}).Create(\\AppSrv\remote\NewPackage.exe)
Note: The applications should use Windows Installer technology.
2. PsExec tool: one of sysinternals utilities
PsExec's most powerful uses include launching interactive command-prompts on remote systems and remote-enabling tools like IpConfig that otherwise do not have the ability to show information about remote systems. So, we can use this feature to install our
applications, in fact this is similar with PowerShell methods, the only difference is that PsExec is a comprehensive tool. Similarly, we can use the following command to achieve our goal:
psexec \\PC01 cmd /c "\\AppSrv\remote\NewPackage.msi" /quiet /norestart
Note: we can also use PsExec tool to install Microsoft Update file (.msu)
psexec \\PC01 -s -h -d wusa.exe "\\AppSrv\remote\NewPackage.msu" /quiet /norestart
3. Group Policy Software Installation
In domain environment, this method is very useful to deploy our software. It only supports MSI package for deployment.
We can choose assign a program to user or computer. If you assign the program to a user, it is installed when the user logs on to the computer. When the user first runs the program, the installation is completed. If you assign the program to a computer,
it is installed when the computer starts, and it is available to all users who log on to the computer. When a user first runs the program, the installation is completed.
You can get the installation information of group policy software installation in event viewer, including success or failure.
4. System Center Configuration Manger
The Microsoft System Center Configuration Manager software distribution feature provides a set of tools and resources that help you create and manage packages and advertisements used to distribute software to client resources within your enterprise. This
is a comprehensive suit for deployment.
How to Deploy Applications in Configuration Manager
http://technet.microsoft.com/en-us/library/gg682082.aspx
Summary:
There are a lot of methods for software deployment, here just introduce some generic ways.
Here is another important point of software deployment: Some applications do not use windows installer technology.
Applications that do not use Windows Installer technology may have application-specific methods for automated deployment. For example, a .exe file may be just a wrapper, it can be anything. To determine whether there is a method for deployment automation,
check the documentation for the application or consult the application vendor's support system. In some cases, even if the application vendor did not specifically design the application for installation automation, the installer software manufacturer may have
some techniques for automation.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

In some situations, we may need some ways to install applications remotely, here we summarize four general ways to deploy applications.
1. Using PowerShell to install
We can use the Win32_Product class to install Windows Installer packages, remotely or locally, so in this way, we can use powerShell command to invoke this function. For example, to install the NewPackage.msi package located in the network
share \\AppServ\remote on the remote computer PC01, type the following command at the Windows PowerShell prompt:
(Get-WMIObject -ComputerName PC01 -List | Where-Object -FilterScript {$_.Name -eq "Win32_Product"}).Install(\\AppSrv\remote\NewPackage.msi)
In same method, we can use the following command to deploy .exe application:
(Get-WMIObject -ComputerName PC01 -List | Where-Object -FilterScript {$_.Name -eq "Win32_Process"}).Create(\\AppSrv\remote\NewPackage.exe)
Note: The applications should use Windows Installer technology.
2. PsExec tool: one of sysinternals utilities
PsExec's most powerful uses include launching interactive command-prompts on remote systems and remote-enabling tools like IpConfig that otherwise do not have the ability to show information about remote systems. So, we can use this feature to install our
applications, in fact this is similar with PowerShell methods, the only difference is that PsExec is a comprehensive tool. Similarly, we can use the following command to achieve our goal:
psexec \\PC01 cmd /c "\\AppSrv\remote\NewPackage.msi" /quiet /norestart
Note: we can also use PsExec tool to install Microsoft Update file (.msu)
psexec \\PC01 -s -h -d wusa.exe "\\AppSrv\remote\NewPackage.msu" /quiet /norestart
3. Group Policy Software Installation
In domain environment, this method is very useful to deploy our software. It only supports MSI package for deployment.
We can choose assign a program to user or computer. If you assign the program to a user, it is installed when the user logs on to the computer. When the user first runs the program, the installation is completed. If you assign the program to a computer,
it is installed when the computer starts, and it is available to all users who log on to the computer. When a user first runs the program, the installation is completed.
You can get the installation information of group policy software installation in event viewer, including success or failure.
4. System Center Configuration Manger
The Microsoft System Center Configuration Manager software distribution feature provides a set of tools and resources that help you create and manage packages and advertisements used to distribute software to client resources within your enterprise. This
is a comprehensive suit for deployment.
How to Deploy Applications in Configuration Manager
http://technet.microsoft.com/en-us/library/gg682082.aspx
Summary:
There are a lot of methods for software deployment, here just introduce some generic ways.
Here is another important point of software deployment: Some applications do not use windows installer technology.
Applications that do not use Windows Installer technology may have application-specific methods for automated deployment. For example, a .exe file may be just a wrapper, it can be anything. To determine whether there is a method for deployment automation,
check the documentation for the application or consult the application vendor's support system. In some cases, even if the application vendor did not specifically design the application for installation automation, the installer software manufacturer may have
some techniques for automation.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

How to assign version in sales order and transfer to PP module

Hi all
Users say that customer will require to produce/deliver old goods (we active revision level. The newest material version is D. But customer want version B). How to assign version in sales order and let PP user know the version customer want (MRP run and production order must use version B's BOM)?
Regards,
Rita

Hi,
i have a query if you have implimented ECM this will serve the purpose but it also depends on how good the planning is, in ur client site ( out of SAP ) where planner will plan according to the customer requirement as to which version to be kept active for a date range.The ECO analysts(functional) or consultants will make the ECO changes for those dates.
In general for those type of customers (who needs old version) a different SO created under different document type which will create a production orders with specific order type depending on the assignment of requirement type and requirement class.
those specific production ordertypes can be inturn assigned to either different plant where your old version BOM's will be active.
You need to look into the custom settings in SAP to design the larchitecture to allign with other requirements.What i explained u is common methodology used.
Hope this is clear..
Prakash
Message was edited by:
prakash Uddagatti

How to configure rescheduling for sale order quantities

kindly explain how to configure rescheduling for sale order quantities that are created last month. kindly explain. i am in urgent.
regards,
g.v.shivakkumar

Hi,
Short text
Rescheduling sales and stock transfer documents: by material
Description
The 'Rescheduling' program (SDV03V02) processes sales document items that are contained in the item directory for the material. It takes into consideration open items and schedule lines from stock transfer items, stock transfer scheduling agreements and purchase order requests (items only), referred to hereafter as stock transfer documents, for the materials.
All sales documents for the material that are still open are selected. This means that the material index must be activated for at least all sales document types, whose items may have requirements. All stock transfer documents or items for the material that are still open are also selected. Open in this case means for example, that there is no deletion indicator, that the item from a stock transfer purchase order request cannot be labeled as completed or that the quantity delivered and posted to goods issue for the item in a stock transfer purchase order is the same as the amount ordered. An availability check can only be carried out if a checking rule is assigned to the document type - if this is not the case, the document or document item is not checked.
Checking rule 'A' is used as a basis for rescheduling sales orders (exceptions to this are rush orders they use checking rule B, and orders with individual customer stock; they use checking rule AE). Stock transfer documents use the checking rule that is assigned in Customizing for Purchasing. It is important that the scope of checks is consistent for both the stock transfer documents and the sales documents and that they do not exclude each other, as this can lead to incorrect test results. An example of an incorrect setting would be: The scope of check for checking rule 'A' checks delivery schedules for stock transfer purchase orders and stock transfer purchase requests, however the scope of check for the checking rule for the stock transport scheduling agreement does not.
The items and schedule lines found in the selection are sorted according to 'Priorities' - document category, delivery priority, creation date of the item or schedule line (for stock transfer purchase orders and delivery plans) entered on the selection screen or according to the schedule line date of the earliest schedule line with order quantity, document number and item number and then transferred to the availability check. Priority 1 is highest priority and priority 5 the lowest. Stock transfer purchase order requests are sorted after stock transfer purchase orders and scheduling agreements, as they are less binding. This means that when you have identical sort criteria such as delivery dates, the stock transfer purchase order item is checked first and then the item from the stock transfer purchase order request.
The preset option 'Unconfirmed documents required' only carries out rescheduling for materials for which there is at least one unconfirmed transaction.
You can use the parameters 'Sorting criteria delivery date' to define whether sorting is carried out with the order quantity after the creation date of the item or the delivery date of the earliest schedule line.
If you mark the 'Simulation' field, the checked documents are not saved. Instead a results list is generated and saved. However, the availability check for the corresponding documents continues as if saving has taken place already, that is, that the simulated list corresponds to the actual one.
Under 'Options' on the selection screen, specify whether sales documents and/or stock transfer documents should be processed. For stock transfer documents you can enter whether stock transfer purchase orders and scheduling agreements should be processed at item or schedule line level:
Processing at item level:
All open schedule lines for the item are read and collected, then transferred to the availability check. To sort and prioritize documents, you do not need each individual schedule line. It is sufficient to have the item or data from the first schedule line. All open schedule lines for the item are processed and checked.
Example of processing at item level:
Sorting: Date (Delivery date first schedule line) - Document number - Document item
Doc. cat. Doc. number Doc. item Doc. schedule line Delivery date PO        4500000012      10               0001              26.01. PO        4500000012      10               0002              26.02. PO        4500000025      20               0001              28.01. PO        4500000025      20               0002              02.02.
You can see that the second schedule line for document 4500000025/20 from 02.02 was processed after the second schedule line for document 4500000012/10 from 26.02. This is because all open schedule lines for an item are read and processed. The first schedule line from 4500000012/10 has the earliest delivery date, therefore it has priority.
Processing at schedule line level:
Each open schedule line for an item is entered in document sorting in accordance with the values entered under 'Priorities'. The availability check is carried out for each individual schedule line.
Example for processing at schedule line level:
Sorting: Date (delivery date first schedule line) - document number -document item
Doc. cat.    Doc. number Doc. item Doc. sched. line Del. date PO           4500000012    10             0001           26.01. PO           4500000025    20             0001           28.01. PO           4500000025    20             0002           02.02. PO           4500000012    10             0002           26.02.
Here you can see that each schedule line was sorted according to its delivery date. Note that this type of processing requires more runtime due to the individual checks and more frequent saving.
The results of rescheduling are saved, as long as the program was not started in simulation mode. When calling up from the 'Sales' area menu or when directly starting via the development environment, the iniator is informed via a dialog box that he has just started a process that changes data. He can then decide whether or not he wants to continue.
Checking procedure for stock transfer documents:
An availability check of stock transfer documents in rescheduling is carried out in accordance with the check carried out when manually creating a document. If, however, the required quantity for a schedule line is not available on a particular date and will not be ready until later, new schedule lines are created for the stock transfer purchase orders and scheduling agreements, containing the relevant data. New items are created in this case for stock transfer purchase order requirements. The total sum of schedule line quantities for a processed schedule line corresponds to the schedule line quantity of the original schedule line.
First example: Using a stock transfer purchase order item with a schedule line:
a) Status of item before rescheduling run:
Del. date PO quantity   Confirmed quant Confirmed del. date 23.07.      50 items       0 items              -
==> This now affects the stock/requirement situation:
    - Goods issue is posted for the material in the delivering plant on the 23.07.
    - A purchase order of 10 items was created for the material in the delivering plant. Delivery is expected on the 29.07.
b) Status of stock transfer purchase order item after rescheduling run:
Del. date PO quantity   Confirmed quant   Confirmed del. date 23.07.     40 items      40 items            23.07. 29.07.     10 items      10 items            29.07.
==> The first schedule line was changed in accordance with the results of the rescheduling availability check. Only 40 of the 50 original items could be delivered on the 23.07. Therefore, a new schedule line is created for the rest on the 29.07. for 10 confirmed items.
Second example: Same output situation as the above example.
==> There is now a change in the requirement/stock situation:
A purchase order for 10 items is created for the material in the delivering plant. Delivery is expected on the 29.07. A further purchase shows another 40 planned items on the 30.07.
   Status of stock transfer purchase order item after rescheduling run:
Del. date PO quantity Confirmed quant Confirmed del. date 29.07.     10 items       10 items          29.07. 30.07.     40 items       40 items          30.07.
==> The first schedule line was changed in accordance with the result of the availability check for rescheduling. The original delivery date is set to the date confirmed in the ATP check. A new schedule line is created for the remaining 40 items, that are available on the 30.07.
Note:
Any set fixed delivery date and quantity indicators and creation indicators for schedule lines or items are 'inherited' by newly created schedule lines. Assuming that the original schedule line was fixed in the above example (since it is created manually), this indicator is also set for the newly created schedule line.
If shipping scheduling is activated for a stock transfer document type, this is also implemented for newly created schedule lines, with the exception of route schedule determination. This means that in the current version of the program no route schedule has been determined for a schedule line containing a route schedule for which new schedule lines may need to be created.
The results of the run are issued in the form of a list, which is also saved, so that the results can be controlled at a later date. This is done using the function 'Evaluate rescheduling', but it is only a good idea to do this after the first rescheduling has taken place. You can restrict selection requirements but these can however affect the runtime. You can use this function to analyze the saved list until the next rescheduling run, which writes over the result. If you start rescheduling in the background, a spool file with the result list referred to will be created in the corresponding setting. You can see this in spool management.
Output
A list of changed documents, a list of documents in which an error occurred during processing and as a result were not changed, can be called up via the menu 'Edit - Error log'. If in a subsequent evaluation a restricted selection is carried out, a note appears at the end of the list to say that not all document items are displayed.
You can set the scope of the list under the menu option 'List' in the list display. You can view improvements, deteriorations and the whole list. Before the documents can be included in one or either of the restricted lists, the date or quantity has to have changed so that the item can be contained in both the list of improved or deteriorated documents.
You can use the interface for changing transactions and the order list to navigate. Use 'Back' to exit the list and 'New selection' to return to the selection screen.
Recommendation
You should only start this program occasionally and use very restricted selectin criteria during working hours as it requires enormous system resources.
Note
The columns for 'New date' and 'New confirmed qty' only contain entries if the dates or quantities have changed.
As the system only runs the change check (dates/quantities) per line in the original list, an item whose backlog has increased in the list of improvements. This occurs, for example, if the whole quantity can be delivered at once but at a later date. In this situation, the system determines an increase for the line when it compares quantities.
Regards,
Amrish Purohit

Hi gurur's how we do the interactive report in ALV

hi gurur's how we do the interactive report in ALV.
PLZ HELP ME

Hi Srivasu,
                I will send a sample code along with Comments check it once ok.copy the below code and execute it and debug it ok..
*& Report YPURCHASEORDER_ALV_LISTDISP                                 *
*& DEVELOPER : KIRAN KUMAR.G                                         *
& PURPOSE    : CREATING A PURCHASE ORDER BASED ON PURCHASE DOC NUMBER
*& CREATION DT: 22/11/2007                                            *
*& REQUEST   : ERPK900035                                             *
REPORT YPURCHASEORDER_ALV_LISTDISP.
Tables
TABLES : ekko, "Purchasing Document Header
         ekpo. "Purchasing Document Item
Type pools
TYPE-POOLS: slis.
Internal Tables
DATA: BEGIN OF gt_headerdat OCCURS 0,
       ebeln LIKE ekko-ebeln,        " Purchasing Document Number
       bukrs LIKE ekko-bukrs,        " Company Code
       bstyp LIKE ekko-bstyp,        " Purchasing Document Category
       bsart LIKE ekko-bsart,        " Purchasing Document LIKE
       aedat LIKE ekko-aedat,        " Date on which the recordwascreate
       ernam LIKE ekko-ernam,        " Name of Person who Created Object
       lifnr LIKE ekko-lifnr,        " Vendor's account number
       spras LIKE ekko-spras,        " Language Key
       ekorg LIKE ekko-ekorg,        " Purchasing Organization
       ekgrp LIKE ekko-ekgrp,        " Purchasing group
      END OF gt_headerdat.
DATA: BEGIN OF gt_item OCCURS 0,
       matnr LIKE ekpo-matnr,        "Material Number
       werks LIKE ekpo-werks,        "Plant
       lgort LIKE ekpo-lgort,        "Storage location
       matkl LIKE ekpo-matkl,        "Material group
       menge LIKE ekpo-menge,        "Purchase order quantity
       meins LIKE ekpo-meins,        "Order unit
       netpr LIKE ekpo-netpr,        "Net price in purchasing document
       kunnr LIKE ekpo-kunnr,        "Customer Number 1
      END OF gt_item.
Global Structures
DATA: gt_header    TYPE slis_t_listheader, "For Headings
      wa_header    TYPE slis_listheader,
      gt_fieldcat TYPE slis_t_fieldcat_alv, "Structure Defintion
      wa_fieldcat TYPE slis_fieldcat_alv,
      gt_fieldcat1 TYPE slis_t_fieldcat_alv,
      wa_fieldcat1 TYPE slis_fieldcat_alv,
      wa_layout    TYPE slis_layout_alv,     "Layout
      gt_events    TYPE slis_t_event,        "For Events
      wa_events    TYPE slis_alv_event.
Selection Screen
SELECTION-SCREEN: BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS : s_ebeln FOR ekko-ebeln.
SELECTION-SCREEN: END OF BLOCK b1.
Initialization
INITIALIZATION.
PERFORM initial.
Fetch Data
START-OF-SELECTION.
PERFORM fetch_data.
END-OF-SELECTION.
Bulid fieldcatalog
PERFORM fieldcat.
Change fieldcatalog
PERFORM fieldcat_change.
Events Triggering
PERFORM place_events.
Layout.
PERFORM layout.
Display Data
SORT gt_headerdat BY ebeln.
PERFORM display_list.
*&      Form initial
      text
--> p1        text
<-- p2        text
FORM initial .
s_ebeln-sign    = 'I'.
s_ebeln-option = 'BT'.
s_ebeln-low     = '3000000090'.
s_ebeln-high    = '3000000166'.
APPEND s_ebeln.
ENDFORM.                    " initial
*&      Form fetch_data
      text
--> p1        text
<-- p2        text
FORM fetch_data .
REFRESH gt_headerdat. "Clear the Body of Internal Table
CLEAR   gt_headerdat. "Clear Header Line
SELECT ebeln
         bukrs
         bstyp
         bsart
         aedat
         ernam
         lifnr
         spras
         ekorg
         ekgrp
    FROM ekko
    INTO TABLE gt_headerdat
   WHERE ebeln IN s_ebeln.
ENDFORM.                    " fetch_data
*&      Form display_list
      text
--> p1        text
<-- p2        text
FORM display_list .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
   EXPORTING
I_INTERFACE_CHECK              = ' '
I_BYPASSING_BUFFER             =
I_BUFFER_ACTIVE                = ' '
    i_callback_program             = sy-cprog
I_CALLBACK_PF_STATUS_SET       = ' '
    i_callback_user_command        = 'USERCOMMAND'
I_STRUCTURE_NAME               =
    is_layout                      = wa_layout
    it_fieldcat                    = gt_fieldcat
IT_EXCLUDING                   =
IT_SPECIAL_GROUPS              =
IT_SORT                        =
IT_FILTER                      =
IS_SEL_HIDE                    =
I_DEFAULT                      = 'X'
I_SAVE                         = ' '
IS_VARIANT                     =
    it_events                      = gt_events
IT_EVENT_EXIT                  =
IS_PRINT                       =
IS_REPREP_ID                   =
I_SCREEN_START_COLUMN          = 0
I_SCREEN_START_LINE            = 0
I_SCREEN_END_COLUMN            = 0
I_SCREEN_END_LINE              = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER        =
ES_EXIT_CAUSED_BY_USER         =
    TABLES
    t_outtab                       = gt_headerdat
   EXCEPTIONS
    program_error                  = 1
    OTHERS                         = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " display_list
*&      Form place_events
      text
--> p1        text
<-- p2        text
FORM place_events .
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
    EXPORTING
      i_list_type     = 0
    IMPORTING
      et_events       = gt_events
    EXCEPTIONS
      list_type_wrong = 1
      OTHERS          = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CLEAR wa_events.   "Clear Header Line
READ TABLE gt_events INTO wa_events WITH KEY name = 'TOP_OF_PAGE'.
IF sy-subrc = 0.
    wa_events-form = 'HEADING'.
    MODIFY gt_events FROM wa_events INDEX sy-tabix.
ENDIF.
CLEAR wa_events.   "Clear Header Line
READ TABLE gt_events INTO wa_events WITH KEY name = 'END_OF_LIST'.
IF sy-subrc = 0.
    wa_events-form = 'PAGEDOWN'.
    MODIFY gt_events FROM wa_events INDEX sy-tabix.
ENDIF.
CLEAR wa_events.    "Clear Header Line
READ TABLE gt_events INTO wa_events WITH KEY name = 'USER_COMMAND'.
IF sy-subrc = 0.
    wa_events-form = 'USERCOMMAND'.
    MODIFY gt_events FROM wa_events INDEX sy-tabix.
ENDIF.
ENDFORM.                    " place_events
*&      Form layout
      text
--> p1        text
<-- p2        text
FORM layout .
CLEAR wa_layout.                   "Clear Header Line
wa_layout-zebra = 'X'.             "Zebra Lines in the Output
wa_layout-colwidth_optimize = 'X'. "Optimize the Column Width
ENDFORM.                    " layout
*&      Form heading
      text
FORM heading.
WRITE:/6 'THIS REPORT DISPLAYS THE PURCHASE ORDER DETAILS'.
WRITE:/6 'CLICK ON PURCHASE DOC NO FIELD(INTERACTIVE LIST)'.
ENDFORM.                    "heading
*&      Form fieldcat
      text
--> p1        text
<-- p2        text
FORM fieldcat .
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
   EXPORTING
    i_program_name               = SY-CPROG
    i_internal_tabname           = 'GT_HEADERDAT'
I_STRUCTURE_NAME             =
I_CLIENT_NEVER_DISPLAY       = 'X'
    i_inclname                   = SY-CPROG
I_BYPASSING_BUFFER           =
I_BUFFER_ACTIVE              =
    CHANGING
    ct_fieldcat                  = gt_fieldcat
   EXCEPTIONS
    inconsistent_interface       = 1
    program_error                = 2
    OTHERS                       = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " fieldcat
*&      Form fieldcat_change
      text
--> p1        text
<-- p2        text
FORM fieldcat_change .
LOOP AT gt_fieldcat INTO wa_fieldcat.
    CASE wa_fieldcat-fieldname.
      WHEN 'EBELN'.
        wa_fieldcat-hotspot = 'X'.
    ENDCASE.
    MODIFY gt_fieldcat FROM wa_fieldcat INDEX sy-tabix.
ENDLOOP.
ENDFORM.                    " fieldcat_change
*&      Form pagedown
      text
FORM pagedown.
WRITE:/35 'HAVE A NICE DAY...' COLOR 4.
ENDFORM.                    "pagedown
*&      Form usercommand
      text
     -->UCOMM      text
     -->SELFIELD   text
FORM usercommand USING ucomm LIKE sy-ucomm selfield TYPE slis_selfield.
READ TABLE gt_headerdat INDEX selfield-tabindex.
CASE selfield-sel_tab_field.
    WHEN 'GT_HEADERDAT-EBELN'.
      REFRESH : gt_item.
      CLEAR   : gt_item.
      SELECT matnr
             werks
             lgort
             matkl
             menge
             meins
             netpr
             kunnr
        FROM ekpo
        INTO TABLE gt_item
       WHERE ekpo~ebeln EQ gt_headerdat-ebeln.
*Build a Field Catalog
      PERFORM fieldcat1.
*For Heading in the Interactive List
      PERFORM heading1.
*Display Interactive Data
      PERFORM display_data1.
ENDCASE.
ENDFORM.                    "usercommand
*&      Form fieldcat1
      text
--> p1        text
<-- p2        text
FORM fieldcat1 .
REFRESH : gt_fieldcat1.
CLEAR   : wa_fieldcat1.
wa_fieldcat1-col_pos    = '1'.           "Column Postion
wa_fieldcat1-fieldname = 'MATNR'.       "Field Name
wa_fieldcat1-tabname    = 'GT_ITEM'.   "Internal Table
wa_fieldcat1-key        = 'X'.           "Blue Color
wa_fieldcat1-seltext_l = 'MATERIAL NO'. "Display Text Screen
APPEND wa_fieldcat1 TO gt_fieldcat1.
CLEAR wa_fieldcat1.
wa_fieldcat1-col_pos    = '2'.           "Column Postion
wa_fieldcat1-fieldname = 'WERKS'.       "Field Name
wa_fieldcat1-tabname    = 'GT_ITEM'.   "Internal Table
wa_fieldcat1-seltext_l = 'PLANT'.       "Display Text Screen
APPEND wa_fieldcat1 TO gt_fieldcat1.
CLEAR wa_fieldcat1.
wa_fieldcat1-col_pos    = '3'.           "Column Postion
wa_fieldcat1-fieldname = 'LGORT'.       "Field Name
wa_fieldcat1-tabname    = 'GT_ITEM'.   "Internal Table
wa_fieldcat1-seltext_l = 'STORAGE LOCATION'."Display Text Screen
APPEND wa_fieldcat1 TO gt_fieldcat1.
CLEAR wa_fieldcat1.
wa_fieldcat1-col_pos    = '4'.            "Column Postion
wa_fieldcat1-fieldname = 'MATKL'.        "Field Name
wa_fieldcat1-tabname    = 'GT_ITEM'.    "Internal Table
wa_fieldcat1-seltext_l = 'MATERIAL GRP'. "Display Text Screen
APPEND wa_fieldcat1 TO gt_fieldcat1.
CLEAR wa_fieldcat1.
wa_fieldcat1-col_pos    = '5'.            "Column Postion
wa_fieldcat1-fieldname = 'MENGE'.        "Field Name
wa_fieldcat1-tabname    = 'GT_ITEM'.    "Internal TAble
wa_fieldcat1-seltext_l = 'PO QUANTITY'. "Display Text Screen
APPEND wa_fieldcat1 TO gt_fieldcat1.
CLEAR wa_fieldcat1.
wa_fieldcat1-col_pos    = '6'.            "Column Pos tion
wa_fieldcat1-fieldname = 'MEINS'.        "Field Name
wa_fieldcat1-tabname    = 'GT_ITEM'.    "Internal TAble
wa_fieldcat1-seltext_l = 'BASE UNIT MEASURE'."Display Text Screen
APPEND wa_fieldcat1 TO gt_fieldcat1.
CLEAR wa_fieldcat1.
wa_fieldcat1-col_pos    = '7'.            "Column Postion
wa_fieldcat1-fieldname = 'NETPR'.        "Field Name
wa_fieldcat1-tabname    = 'GT_ITEM'.    "Internal Table
wa_fieldcat1-seltext_l = 'NET PRICE'.    "Display Text Screen
APPEND wa_fieldcat1 TO gt_fieldcat1.
CLEAR wa_fieldcat1.
wa_fieldcat1-col_pos    = '8'.            "Column Postion
wa_fieldcat1-fieldname = 'KUNNR'.        "Field Name
wa_fieldcat1-tabname    = 'GT_ITEM'.    "Internal Table
wa_fieldcat1-seltext_l = 'CUSTOMER NO'. "Display Text Screen
APPEND wa_fieldcat1 TO gt_fieldcat1.
CLEAR wa_fieldcat1.
ENDFORM.                                                    " fieldcat1
*&      Form heading1
      text
--> p1        text
<-- p2        text
FORM heading1 .
REFRESH : gt_header.
CLEAR   : wa_header.
wa_header-typ = 'H'.
wa_header-info = 'THIS IS AN INTERACTIVE LIST'.
APPEND wa_header TO gt_header.
ENDFORM.                                                    " heading1
*&      Form top
      text
FORM top.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
    it_list_commentary       = gt_header
I_LOGO                   =
I_END_OF_LIST_GRID       =
ENDFORM.                    "top
*&      Form display_data1
      text
--> p1        text
<-- p2        text
FORM display_data1 .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
I_INTERFACE_CHECK                 = ' '
I_BYPASSING_BUFFER                = ' '
I_BUFFER_ACTIVE                   = ' '
    i_callback_program                = SY-CPROG
I_CALLBACK_PF_STATUS_SET          = ' '
I_CALLBACK_USER_COMMAND           = ' '
    i_callback_top_of_page            = 'TOP'
I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
I_CALLBACK_HTML_END_OF_LIST       = ' '
I_STRUCTURE_NAME                  =
I_BACKGROUND_ID                   = ' '
I_GRID_TITLE                      =
I_GRID_SETTINGS                   =
IS_LAYOUT                         =
    it_fieldcat                       = gt_fieldcat1
IT_EXCLUDING                      =
IT_SPECIAL_GROUPS                 =
IT_SORT                           =
IT_FILTER                         =
IS_SEL_HIDE                       =
I_DEFAULT                         = 'X'
I_SAVE                            = ' '
IS_VARIANT                        =
IT_EVENTS                         =
IT_EVENT_EXIT                     =
IS_PRINT                          =
IS_REPREP_ID                      =
I_SCREEN_START_COLUMN             = 0
I_SCREEN_START_LINE               = 0
I_SCREEN_END_COLUMN               = 0
I_SCREEN_END_LINE                 = 0
IT_ALV_GRAPHICS                   =
IT_HYPERLINK                      =
IT_ADD_FIELDCAT                   =
IT_EXCEPT_QINFO                   =
I_HTML_HEIGHT_TOP                 =
I_HTML_HEIGHT_END                 =
IMPORTING
E_EXIT_CAUSED_BY_CALLER           =
ES_EXIT_CAUSED_BY_USER            =
    TABLES
    t_outtab                          = gt_item
   EXCEPTIONS
    program_error                     = 1
    OTHERS                            = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " display_data1
Reward points if helpful.
Kiran Kumar.G.A
        Have a Nice Day..

How to deploy and debug java web service in eclipes or using any other soft

Hai,
can any one tell me how to deploy and debug java web service in eclipes or using any other software.
i have used tomcat web server and jdk1.4.0 to develop web service.
we have used web service to interact with MS outlook .
bye
sudhakar.m

Hi Sudhakar,
If you are used to working with ant then you can very well use eclipse to deploy your web service.
You would usually have the ant script in the source root working directory. From eclipse if you select the build file from the navigator view and right click you will see a run ant option in the pop up menu.
Select that option and you would be able to see each targets with a checkbox select option. So define each target maybe one for wsdl2java conversion, one for compilation and one for deploying your web services. You can either make all of them run by having depends option on or you can run them individually as it takes your fancy.
I am not sure about debugging a web service yet.
Hope this helps
Aviroop
The truth is out there? Does anyone know the URL?

How to create Adobe Interactive Form in MDM

Iam new to MDM Technology, I want to create Adobe Interactive Form and show a sample demo.
Sample demo which should show adobe interactive form in mdm and how to integrate adobe interactive form in mdm and how to update th data in MDM
I have knowledge of creation of adobe form but how to integrate with mdm technology.

Hi,
There are couple of ways to integrate MDM with SAP Interactive Forms.
1. WebDynpro Java and MDM API (requires Portal)
2. MDM WebService (Portal not required)
Updating data in MDM using WebDynpro Java :
1. In Component Controller -> Fetch data from MDM using API and populate appropriate context structure
2. Map the View Controller and Comp Controller context.
3. Place Interactive Form UI element in view.(Keep the UI element in UpdatePDF mode, this can be done in properties window. Also increase the height and width property value)
4. The Interactive Form UI element is editable in Adobe Form Designer (7.1 / 8.0)
5. Design the form and bind the UI (TextFields/ Dropdowns) with the Context of View Controller.(Done in Binding tab of Object window)
6. Deploy and run the application.
The rendered application will contain an Adobe Interactive Form populated with MDM data.
Regards,
Suresh

How to make interactive magazines for the ipad

I have just seen this via the web site from Scott Kelby, so how is this interactivity made on the ipad?
Light It Digital Magazine http://itunes.apple.com/us/app/light-it-digital-magazine/id455243692?mt=8
I believe its done via Adobe in design and som new software from adobe.com at http://www.adobe.com/solutions/digital-publishing.html but the detail on the adobe web site is a bit sketchy at present as their is a big price tag fo around 500-700 us Dollars a month and I am not sure what that is for, seem very expensive to me.
Are there any lower cost ways to make a magazine like this for the ipad?
thanks

there are differences because of the different capabilities of the ipad vs a desktop or laptop. but the workflow is not much different except you test in the emulator and have to do periodic testing on an ipad.
the big difference is when it comes to deploying your app. then you get to deal with apple.

How to deploy SAP BI report to BO

Hello,
I am a BI Consultant and a newbie to BO. I want to know how to deploy the current SAP BI queries to BO.
I have downloaded and installed SAP BOBJ Edge series 3.1(trial version). I have also downloaded the "Integration kit for SAP" but could not install it as the Product ID has expired (valid for 90 days since June 09).
Can someone guide me on the step by step procedure to deploy the BI reports to BO? I have already read about the "Step by step installation guide to integrate BO with SAP" but not sure on how to deploy the reports.
Thanks

Hi
please take a look at the following links. Ingo's blogs can help you start ith BO.
BusinessObjects and SAP - Overview
/people/ingo.hilgefort/blog/2008/02/07/businessobjects-and-sap-part-i
Crystal Reports and BI Queries
/people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
Crystal Reports and BI Hierarchies
/people/ingo.hilgefort/blog/2008/02/27/businessobjects-and-sap-part-3
Crystal Reports and SAP R/3`
/people/ingo.hilgefort/blog/2008/03/23/businessobjects-and-sap-part-4
Web Intelligence and SAP BI
/people/ingo.hilgefort/blog/2008/03/24/businessobjects-and-sap-part-5
Web Intelligence - Delegated Search and Delegated Measures
/people/ingo.hilgefort/blog/2008/08/27/businessobjects-and-sap-part-6--web-intelligence-and-sap-bi
OLAP Universe Change Management
/people/ingo.hilgefort/blog/2008/08/29/businessobjects-and-sap-part-7--olap-universe-change-management
Xcelsius Overview
/people/ingo.hilgefort/blog/2008/09/02/teched-las-vegas--are-you-up-for-the-business-objects-community-xcelsius-challenge
Xcelsius, Crystal Reports and Live Office
/people/ingo.hilgefort/blog/2008/09/03/businessobjects-and-sap-part-9--xcelsius-with-crystal-reports-and-live-office
Xcelsius, Universes and Query as a Web Service
/people/ingo.hilgefort/blog/2008/09/04/businessobjects-and-sap-part-10--xcelsius-with-universe-and-query-as-a-webservice
Install Part #1
/people/ingo.hilgefort/blog/2008/09/17/businessobjects-and-sap--installation-and-configuration-part-1-of-4
Install Part #2
/people/ingo.hilgefort/blog/2008/09/17/businessobjects-and-sap--installation-and-configuration-part-2-of-4
Install Part #3
/people/ingo.hilgefort/blog/2008/09/17/businessobjects-and-sap--installation-and-configuration-part-3-of-4
Install Part #4
/people/ingo.hilgefort/blog/2008/09/17/businessobjects-and-sap--installation-and-configuration-part-4-of-4
SAP Authentication
/people/ingo.hilgefort/blog/2008/09/19/businessobjects-and-sap--configure-sap-authentication
Publishing part 1
/people/ingo.hilgefort/blog/2008/09/23/businessobjects-and-sap--publishing-of-crystal-reports-part-1-of-3
Publishing part 2
/people/ingo.hilgefort/blog/2008/09/24/businessobjects-and-sap--publishing-of-crystal-reports-part-2-of-3
Publishing part 3
/people/ingo.hilgefort/blog/2008/09/24/businessobjects-and-sap--publishing-of-crystal-reports-part-3-of-3
XC, CR and LO Part 1 of 4
/people/ingo.hilgefort/blog/2008/10/03/businessobjects-and-sap-part-1-of-4--creating-a-xcelsius-dashboard-on-top-of-sap-bi
XC, CR and LO Part 2 of 4
/people/ingo.hilgefort/blog/2008/10/07/businessobjects-and-sap-part-2-of-4--creating-a-xcelsius-dashboard-on-top-of-sap-bi
XC, CR and LO Part 3 of 4
/people/ingo.hilgefort/blog/2008/10/07/businessobjects-and-sap-part-3-of-4--creating-a-xcelsius-dashboard-on-top-of-sap-bi
XC, CR and LO Part 4 of 4
/people/ingo.hilgefort/blog/2008/10/10/businessobjects-and-sap-part-4-of-4--creating-a-xcelsius-dashboard-on-top-of-sap-bi
Technical Material
/people/ingo.hilgefort/blog/2008/11/19/businessobjects-integration-with-sap-netweaver-bi--technical-material
SAP Press Book
http://www.sap-press.de/katalog/buecher/titel/gp/titelID-2053?GalileoSession=78576305A3-RD.-s47E
Regards,
Stratos

Hi team, please help me how to deploy creative cloud desktop application through SCCM for an enterprise

Hi team, please help me how to deploy creative cloud desktop application through SCCM for an enterprise

Moving this discussion to the Enterprise Deployment for Creative Cloud, Creative Suite forum.

How to deploy BI on EHP1 for SAP NetWeaver Composition Environment 7.1

Hello Gurus,
i have installed SAP NetWeaver 7.01 SR1 SP3 ABAP Trial Version at home on vista 32 bits.
it's running well...
next i have installed EHP1 for SAP NetWeaver Composition Environment 7.1 - Preview Version
and follow this guide :
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b057d7e3-b89e-2b10-1e9e-c426e967f8e1
the portal is running well....coooool.. ( http//:localhost:50100/irj/portal)
after i follow this documentation to create some cubes on BI abap trail (client 001).
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/4096b8fc-6be7-2a10-618e-b02a5e5e798f
i create my report with the query designer,
and i see my bi report with transaction RSRT and ABAP WEB tab ( http://localhost:80000)
it's running well....whaooouuu !!!!
Now i'm lost, i would like to deploy my bi report on the portal, but i don't know what i must do.
( and when i try with the query designer or rsrt + java web i have a error message )
- perhaps create an user communication between portal/bi abap where ?
- how to deploy bi java on portal (EHP1 for SAP NetWeaver Composition Environment 7.1)
by the way, i can't find the bi post install template in the configuration wizard on the the portal...
thank's for your help.
Florent,
Edited by: Florent BUTTY on Mar 24, 2009 1:43 PM

Hi,
Can you please tell me what is the diff between 7.01 & 7.1? if you can share any docs, is highly appreciated.
Thanks,
Kiran

How to deploy "private" interactive sales material to iPad

Similar Messages

Maybe you are looking for