How to detect IMAQ devices?

Hello,
Is it possible, using Labview functions, to detect the presence and the name of an IMAQ board on the computer, the name of the configuration ( for example img0 ) and the channel available ?
Tank you !

I don't know if there is an easy way, but one method I used in the past is to try opening "img0", "img1" and so on since they are the default labels assigned to IMAQ cards. If there was not an error, the card existed. In my case, I knew only one camera would be connected to each card so I didn't have to do any more. I suspect there are properties that would give you more information about the IMAQ card and other stuff after you open img0, img1 or whatever.
Bruce
Bruce Ammons
Ammons Engineering

Similar Messages

How to detect avilable devices in a n/w

hello,
for me, I try to show the avilable devices in a network when I intially startup the system.
Like some NMS systems, it shows all avilable devices in a network by graphically.
how to detect and show the devices?
thank you.

Hi friend,
Just use Sel.ShapeRange.Count instead.
On the other hand, to get selected text, we could use Sel.Text, to get whole selected
TextBox’s text, we could use Sel.ShapeRange.TextFrame.TextRange.Text.
Good job！
Regards
Starain
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to detect a device is Jail broken or not.

Hi,
      I am designing an enterprise application which should not run on Jail break devices.
So how can i detect the device is Jail break or not through programatically.
     I have gone through some sites, i found some information like by checking the iOS native applications/ Checking Cydia app present on decvice..
But is there any solution which can work on all the Jail break devices.
Please help me to resolve this issue.
Is it possible to connect the Appstore on Jail break devices. If it is not then we can put a check on it. Please clarify on this.
Thanks

HI,
    you can try WM_DEVICECHANGE.
    http://www.codeproject.com/Articles/14500/Detecting-Hardware-Insertion-and-or-Removal
   Hope to be helped somewhat to you.

How to detect USB device drives

Hi
I want to write a program which will detect the drive letter when a usb device is plugged in. i.e., if a usb device is plugged in and the drive letter is "F:", then my program will instantly detect the presense of the device as well as get the drive letter. How's that possible in Java?
Thanx in advance
Regards
Mathew

cotton.m wrote:
Well if you're looking for the newUSBDriveListener API you're out of luck.
There is no way to do what you are looking for in a number of ways.
1) If something is listed as a drive the best you can now (from FileSystemView) is that it's a drive.
2) There isn't "new drive/or device added" event API.
So what you would have to do is when your program starts get the list of roots. Then poll at some intervals to get the list of roots and see if there are changes. If new drives show up then they show up.I agree!!!

How to detect wired devices ip in AP Extreme?

Howdy, just replaced my old D-Link router @ home with an AirPort Extreme 5th gen. To my surprise the AirPort Utility 6.1 doesn't seem to support seeing wired devices ip and mac-addresses.
I do like to see the ip-addresses of my attached wired devices for NAT-configuration purposes etc, how can I do that? The AP is configured in Router mode with DHCP and NAT w a range of 192.168.1.2-200, not that it should matter. I just want to see what is connetced to the AP.
I've spent a couple of hours trying to find information on this and the only solution that came close was using the old AirPort Utility that is now incompatible with ML.
TIA

Tried that, seems AP Util 5.6 is not supported on Mountain Lion
You are not going to give up that easily, are you?
John Galt has one good suggestion using Pacifist.
If you have Time Machine backups, you can always go back in time and restore AirPort Utility 5.6 to the desktop. Then, move it to the Utilities folder and it will exist just fine along with AirPort Utility 6.1.
As John says, AirPort Utility runs just fine on Mountain Lion. As of now, you just cannot install it using Apple's normal installer package. Hopefully, Apple will come their senses soon and provide a full feature option of AirPort Utility.....either a separate program, or an Expert option in the existing application.

How to detect a device is plugged in a COM or a USB port?

Hope that when a device plugging in a COM or the USB port on the PC, the CVI application can catch the event. Due to the application is a windows service mode, so I think use the GetCVIWindowHandle() function to specify a particular Window to receive the message. But no idea to achieve this.
David

HI,
    you can try WM_DEVICECHANGE.
    http://www.codeproject.com/Articles/14500/Detecting-Hardware-Insertion-and-or-Removal
   Hope to be helped somewhat to you.

My iPod Classic is not detected by my Windows 8 computer when I connect it via USB port. How can I get windows to detect this device?

My iPod Classic is not detected by my Windows 8 computer when I connect it via USB port. How can I get windows to detect this device? A message from windows says: the device has malfunctioned.

Try TS1363: iPod: Appears in Windows but not in iTunes.
See also Corrupt iPod classic.
tt2

How can i get itunes to detect my device so i can restore anyone please

how can i get my itunes to detect mt device so i can restore it.

Is your iTunes up to date? iOS7 requires iTunes 11 at hte minimum.

How to detect the installed device name

Hi,
I am using Labview 8.5.
I need to display the device name installed in my pc.
I have a PXI chassis with DAQ,Digitizer and function generator card.To display the DAQ device name used the "DevName" property of DAQmx driver.Similarly to display the Digitizer and function generator card name which function do we need to use.
Please tell me how to do this?
Regards
Meenatchi

Please see the attached zip of VIs.
- Partha
LabVIEW - Wires that catch bugs!
Attachments:
Detect Installed Device Details.zip ‏131 KB

How to detect device connected to Ethernet

Hi,
How do I detect devices connected to Ethernet using LabVIEW.
My requirement is:
I need to detect all devices connected to ethernet in my network.Need to list down all IP of the devices.
Can anyone help me in this...

Found it. However its written a long time ago when I still created spagetti diagrams that give you eye diarrhea, and its bad coding. If someone should use it and cleans it up, please post the cleaned up version
It uses the arp command. prob. other ways to solve this too
Attachments:
IPMAC_scanner.vi ‏33 KB

How do i detect DAQ device number programatticaly using Visual Basic (not using MAX)?

how do i detect DAQ device number programatticaly using Visual Basic (not using MAX)?

Several of the CWDAQ objects have Device (the device number), DeviceName, and DeviceType properties that I think will give you the information that you're looking for. For more information, look in the index of the Measurement Studio reference for Device, DeviceName, and DeviceType.
- Elton

How to call "detect capture devices" in my program

Hi,
I'd like to develop a webcam program. Is it possible to call jmfregistry's "Detect Capture Devices" in my code? So I don't have to ask the user run jmfregistry.
Thanks,
Derek

detect capture devices is dependent of the plataform. I recommend to look into the source code of JMFRegistry and JMF.

How detect capture device without jmf&java client pc ??

hi...
a computer install jmf & java => detect catpure device
but... no detect capture device without jmf & java clientpc...
however solved this problem?
plz...
thanks..
email : [email protected]

You must hard code a dependent platform code to examine the registry or its similar in linux.

Has anyone tried to pair the Tzumi bluetooth headphones to their iMac? My iMac will detect the device, connect to it for about 2 seconds, then shows a status of "not connected". Multiple attempts get the same result.

Has anyone tried to pair the Tzumi bluetooth headphones to their iMac? My iMac will detect the device, connect to it for about 2 seconds, then shows a status of "not connected". Multiple attempts get the same result.

Edge has very clear restrictions, one being that you must have 6 months of clean payment history which you don't. Either wait until April 14, or good luck at Sprint.
I am unsure how it can be determined the payment mix up was the fault of CS, but regardless, the mix up was done. There can be any number of reasons why a payment could be missed without any fault on your part, however you are still the responsible party for the account and must live with the repercussions.

'An error was detected on device \Device\Harddisk0\D during a paging operation.'

Hi,
since a while (as far as i am able to roll back system log in event viewer) I am having strange issues in the sys log, as in the subject. It is a warning of disk event 51: 'An error was detected on device \Device\Harddisk0\D during a paging operation.'
I have freed up 1/3 of each partition on the harddrive. Any idea where can i keep going to investigate?
thx

pogacsa,
I have searched a bit about you issue in microsoft technet,and here's what they have got to say
"An event ID 51 entry is a generic error entry for any type of error that occurs when Windows is paging information to input/output (I/O).
A paging operation occurs when Windows either swaps a page of memory from memory to disk, or when Windows retrieves a page of memory from disk to memory."
In this event, D, DR and FT, they all stand for a certain disk partition number. You can use the Registry or Disk Management to locate the certain disk.
For further information, please refer to the following KBs:
159865 How to distinguish a physical disk device from an event message
http://support.microsoft.com/kb/159865/en-us
244780 Information about Event ID 51
http://support.microsoft.com/kb/244780/en-us
you may also want to check out this link from microsoft technet community as well.
some of the resolutions mentioned there require you to modify your registry.Please DONOT attempt to modify the registry if you dont have enough prior knowledge about it
Also try defragmenting your HDD once.
hope this info helps you
Message Edited by vijaysaradhi on 06-03-2009 02:33 PM
Cheers and regards,
• » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo

How to detect IMAQ devices?

Similar Messages

Maybe you are looking for