How to detect a device is plugged in a COM or a USB port?
Hope that when a device plugging in a COM or the USB port on the PC, the CVI application can catch the event. Due to the application is a windows service mode, so I think use the GetCVIWindowHandle() function to specify a particular Window to receive the message. But no idea to achieve this.
David
HI,
you can try WM_DEVICECHANGE.
http://www.codeproject.com/Articles/14500/Detecting-Hardware-Insertion-and-or-Removal
Hope to be helped somewhat to you.
Similar Messages
-
How to detect the *Acrobat Browser Plug-in version* installed on a users system, on Firefox, Safari, Opera, etc?
Or one script for detecting Plug-in version for major browsers. Need full example code.Wrote an article on this with code samples (Javascript + HTML) - basically there are differences between IE and other browsers. Chrome natively comes with the Chrome PDF Viewer so I've incorporated that in my detection script.
The script detects the browser type, and the installed acrobat version...
Have a look here:
Detect the Adobe Reader Plugin -
When I plug in my iPhone to a USB port on the back of my computer I get the error "MTP USB Device driver was not successfully installed" and of course there is no device that shows up either. It would be great to download my photos! I'm using Windows
Go through this support doc:
OS: Device not recognised in iTunes
Windows: http://support.apple.com/kb/TS1538 -
When I plug my ipod shuffle into my usb port, it no longer shows as a "device" over to the left. This makes it impossible to to transfer a new playlist to my ipod. Any suggestions?
Hi deaconspeaking,
Welcome to Apple Support Communities.
Try looking for the iPod below the Search field in iTunes. If it doesn't show up below search, the second article provides troubleshooting tips that should help you out.
iTunes: Syncing media content to iPod
http://support.apple.com/kb/ht1351
Click the button with your device's name, below the Spotlight window.
In the main iTunes browser window, select Music.
iPod not appearing in iTunes
http://support.apple.com/kb/ts3716
-Jason -
When I plug my iphone in to my USB port in the car or computer I get an error message which says the USB has exceeded it power limit.
What can I do?madonnafromqld wrote:
When I plug my iphone in to my USB port in the car or computer I get an error message which says the USB has exceeded it power limit.
What can I do?
Stop doing that. -
I am trying to get pics off of an SD card. I plugged in the adapter into the USB port. Where do I go to download these pics onto my laptop?
Zapping the pram may work or just restarting your computer after repairing your desktop.
Resetting your Mac's PRAM and NVRAM
http://support.apple.com/kb/HT1452 -
How to detect avilable devices in a n/w
hello,
for me, I try to show the avilable devices in a network when I intially startup the system.
Like some NMS systems, it shows all avilable devices in a network by graphically.
how to detect and show the devices?
thank you.Hi friend,
Just use Sel.ShapeRange.Count instead.
On the other hand, to get selected text, we could use Sel.Text, to get whole selected
TextBox’s text, we could use Sel.ShapeRange.TextFrame.TextRange.Text.
Good job!
Regards
Starain
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
How to detect a device is Jail broken or not.
Hi,
I am designing an enterprise application which should not run on Jail break devices.
So how can i detect the device is Jail break or not through programatically.
I have gone through some sites, i found some information like by checking the iOS native applications/ Checking Cydia app present on decvice..
But is there any solution which can work on all the Jail break devices.
Please help me to resolve this issue.
Is it possible to connect the Appstore on Jail break devices. If it is not then we can put a check on it. Please clarify on this.
ThanksHI,
you can try WM_DEVICECHANGE.
http://www.codeproject.com/Articles/14500/Detecting-Hardware-Insertion-and-or-Removal
Hope to be helped somewhat to you. -
How to plug a hard drive on the USB port of a Time Capsule. TC in bridge mode
Hello
I would like to connect a hard drive onto the USB port of a Time Capsule. This is for saving files (different frome the Time Machine savings). I am struggling to get it working it seems that I can see the HD when under "drives or discs" (running Snow Leopard in French) from the AirPort Utility but I can't access to it.
The TC is in bridge mode.
Thanks for help and guidances.
Best
PierreThe question is clear enough.. I just don't understand why you are having issues.
Can you see in the internal disk of the TC in the finder?
What format are you using on this disk? Try and format it HFS+ if it isn't already.
If you plug it directly into the Mac it works ok??
The other issue is the need for a powered hub on the TC due to the low power it gives the internal port.. or lack of bios compatibility with a range of usb hub chips. Try a powered hub as that can also help. -
Need help getting 2012 Chevy truck radio system to recognize my older i pod when I plug it into the USB port. Can anyone give me advice? Thanks
First, check the manual or specification online, to see if your iPod model is supported. That USB port may be for plugging in a generic USB flash drive with song files on it. Or it may only support more recent iPods.
Also, if it has an auxiliary audio input port (it would look like the headphones jack on iPod), you can use something like this to connect your iPod
http://www.amazon.com/Monster-iCable-Player-Auxiliary-Input/dp/B002AR5XIK
and just use your iPod to "play through" the car audio system. -
How to detect wired devices ip in AP Extreme?
Howdy, just replaced my old D-Link router @ home with an AirPort Extreme 5th gen. To my surprise the AirPort Utility 6.1 doesn't seem to support seeing wired devices ip and mac-addresses.
I do like to see the ip-addresses of my attached wired devices for NAT-configuration purposes etc, how can I do that? The AP is configured in Router mode with DHCP and NAT w a range of 192.168.1.2-200, not that it should matter. I just want to see what is connetced to the AP.
I've spent a couple of hours trying to find information on this and the only solution that came close was using the old AirPort Utility that is now incompatible with ML.
TIATried that, seems AP Util 5.6 is not supported on Mountain Lion
You are not going to give up that easily, are you?
John Galt has one good suggestion using Pacifist.
If you have Time Machine backups, you can always go back in time and restore AirPort Utility 5.6 to the desktop. Then, move it to the Utilities folder and it will exist just fine along with AirPort Utility 6.1.
As John says, AirPort Utility runs just fine on Mountain Lion. As of now, you just cannot install it using Apple's normal installer package. Hopefully, Apple will come their senses soon and provide a full feature option of AirPort Utility.....either a separate program, or an Expert option in the existing application. -
How to detect IMAQ devices?
Hello,
Is it possible, using Labview functions, to detect the presence and the name of an IMAQ board on the computer, the name of the configuration ( for example img0 ) and the channel available ?
Tank you !I don't know if there is an easy way, but one method I used in the past is to try opening "img0", "img1" and so on since they are the default labels assigned to IMAQ cards. If there was not an error, the card existed. In my case, I knew only one camera would be connected to each card so I didn't have to do any more. I suspect there are properties that would give you more information about the IMAQ card and other stuff after you open img0, img1 or whatever.
Bruce
Bruce Ammons
Ammons Engineering -
I now get an urecognisable usb device message when i plug my ipod classic (ipod colour?) into the usb input in my Volvo V70. The ipod used to work, but since updating the IOs it doesn't. Can anyone tell me where i can find a copy of an old ipsw which does work so that i can downgrade back and acheive compatibility again,
thanks chris jonesperhaps someone from apple tech might contribute as the software upgrade has rendered the device useless for my purposes
Chris Jones -
How do I set up starry night with MacBook pro on the USB port with a serial/USB adapter?
How do I set up a MacBook Pro running Lion to interface with Starry Night software? My telescope is a Meade LX200GPS with a serial input. I have tried using a Radio Shack USB/Serial adapter which worked when I used a Windows 7 laptop but does not work with my MacBook Pro.
Just started to research this on both this site and on Starry Night .I was hoping to find a driver for the Radio Shack USB Serial Adapter from Apple's site. Radio Shack only has the Windows driver that came with the adapter. Will let you know when I find the right driver. Stay tuned.
-
Is there anything that can be done to fix this?
Hi joy145,
If you are having issues syncing and would like to manually manage your content, you may find the following article helpful:
Apple Support: Managing content manually on iPhone, iPad, and iPod
http://support.apple.com/kb/HT1535
If you are still having issues or continually prompted to erase and sync, you may want to try restoring your iPhone to factory settings before moving your data over (either via syncing or manually):
Apple Support: Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/ht1414
(Note: Restoring iOS software deletes all your data and content from your device, including songs, videos, contacts, photos, and calendar info.)
Regards,
- Brenden
Maybe you are looking for
-
Hi All, We are working on BI7.0 and facing a weird problem. As in BW 3.5, when i execute a query on the web and utilize change drilldown feature for characterstics in the rows to "horizontal" option, the characteristic jumps from rows to columns in t
-
After getting my MacBook Pro a few days ago, I'm eager to hook it up to a TV and watch some video from bittor'...i mean uncopyrighted content However, the TV I want to connect it to doesn't have any digital inputs, although it does have both S-Video
-
I've read a few discussion about this but haven't found anything useful. I am running Lion on my Spring 2010 MacBook Pro and I recently installed Windows 7 via bootcamp. Installation went smoothly and everything is working fine. My only problems is,
-
Hi All, Is there any event in windows universal app (wp8.1&win8.1) that fires when screen locked and unlocked with in the app Right now, I am using this below mentioned event Window.Current.VisibilityChanged += CurrentWindow_VisibilityChanged;, but i
-
Finding Window's java program path in LabVIEW
I'm writing some software that depends on various java files being installed correctly into the lib/ext folders and bin folders of the current version of the java runtime installed. I'd like to be able to check if these files are in place and give a