How to display previous settlement rules (CJ70)

Hi,
Is there any transaction code to view the list of settlement rule from CJ70.
We settle from 1 WBS - 1 AUC - many Fixed Assets
After I made final settlement rules in CJ70 and run CJ88, the lines of settled items are gone. How to display the list of previous final settlement rules (i.e this WBS has been settled to what assets)
Currently, I could get the list from FBL3N, find the GL posting with WBS number, click Original Document then it will display previous settlement. Then I click settlement rules and it will display previous settlement rules. Any other way besides FBL3N? Because it will only display rules from particular WBS and I have to find the GL posting first.

Go to CNS41/CN41. Select the WBS Element for which you want to see the settlement rules. Then Click on the Settlement Rule button. This will dispaly all the settlement receivers. i.e to AUC as well as the multiple Fixed Assets.
Hope it helps..
Seek for some points if it helps.
Thanks

Similar Messages

How can I make settlement rule mandatory in create work order (IW31)

How can I make settlement rule mandatory in create workorder and saving without release.
I kanow we can make settlement rule mandatory upon Release order but here requirement is
Create work order (IW21) save without releasing that time settlement rule should default.

Hi,
1.If you want the settlement rule default then maintain account assignment data in technical object and when MO is created on that it would be copied into the settlement rule...
2. If you want to make those fields mandatory .... plz check up field selections in config , if you cannot find those then use SHD0 Transaction variant to make those fields mandatory.
3. Enter SHD0 , Enter IW31 in transaction and ZIW31 for transaction variant ..click create option and this takes you to IW31 initial screen , here enter required values of technical object etc and press enter and this gives you IW31 Initial scree screen variant , click continue and this takes you to inside screen and here enter required field values and on pressing enter gives you screen variant .. so you need to enter field values and check the flow of screen variants and on getting settlement rule screen variant select required option for the fields you need.
4. Finally you can save that in package created in SE80 for transporting to other client .., you can activate the variant in SHD0 -->Standard variants -->you can find activate option ..
regrds
pushpa

How to display previously entered data in TableModel

This post is continued from the last one. I was having problem displaying previously entered data into TableModel. someone suggested whether my TableModel is persistent.
I am sorry to say I am not sure how to make TableModel persistent. Can someone tell me what to do.
Following is my implementation of TableModel:
import java.awt.*;
import javax.swing.*;
import javax.swing.event.*;
import javax.swing.table.*;
import java.util.*;
import java.io.*;
public class UsersModel implements TableModel {
public static final String[] colNames ={
"Usernmae",
"Location"
public static final Class[] colClasses ={
String.class,
String.class,
public static final int
USERNAME_COL = 0,
LOCATION_COL = 1;
//used to hold a list of TableModelListeners
protected java.util.List tableModelListeners = new ArrayList();
protected java.util.List data = new ArrayList();
public static void main(String []args){
new UsersModel();
}//end main
public UsersModel(){
public void add(Users u){
data.add(u);
and when I need to add new users, I do it in the following way:
Users u= new Users(n,l);
model.add(u);
table.setModel(model);
I hope someone can help

Please post the entire class, this certainly won't compile because it does not implement all the TableModel methods. Also, why not base it off of AbstractTableModel?

How to display of the rule explanation screen within claim expert mode (ICLDCD02)

Hi all,
I just read Consulting Note - 1586478:BRFplus in FS-CM. According to the note, it is possible to display the rule explanation screen with claim expert mode. Would you like to provide how it can be done to me? It will be highly appreciated.

Just a remark: this is an excellent note - I'm wondering wether this is linked from SAP Application help.
Best Regards,
Tobias

How to display Previous Entire QTR bookings

Hi All,
I have one requirement, my client need to display the records are previous entire QTR bookings and Previous Year QTR Bookings.
My ETL team created one Agg table based on Date level. I joined with date dimension table but I am not able get proper result values.
The user input parameter should be give date like 05/10/12 or 16/10/12. Records should be displayed entire quarter Values. But if any Dimension Columns(Geo, Channel and Product) to be added reports based on that values should be changed sum should be displayed entire QTR Values on combination of dimension columns.
The Logic should be implement in RPD level only not in Answers Level.
Report Columns are
Date PRV_QTR_BKG PRV_YEAR_QTR_BKG
05/10/12 100 100
(OR)
16/10/12 100 100
Thaks,
Raja

Hi MK,
My requirement is displayed in bellow columns
Ex:
Date Geo PRV_QTR_BKG PRV_YEAR_QTR_BKG PRV_ENT_QTR_BKG PRV_ENT_YEAR_BKG
05/10/2012 US 30 50 200 300
05/11/2012 IND 35 40 200 300
Conclusion:
PRV_QTR_BKG should be calculate on user parameter date like 05/10/2012 means 2012 Q1 in 40 days sum of bookings with combination of dimension columns like geo, product, channel. Same as PRV_year_QTR_BKG
PRV_ENT_QTR_BKG should be calculate on same parameter but sum(90) days bookings with combination of dimension columns like geo, product, channel. Same as PRV_YEAR_ENT_QTR_BKG
Thanks,
Raja

Internal order "settlement rule" change

Dear Gurus,
I would like to change "settlement rule" in internal oder which has been used since go-live under ECC6.0.
I go to KO02, keyin 'order number' ,enter and click on "settlement rule" button to update.
but profitability segment line just display mode not changeable.
How can i update settlement rule in KO02?
kr,
J.

once you settle an order with a settlement rule you cannot change the rule no more.
But you can create a new settlement rule.
First double click on the settlement rule you are currently using and for the "validity from field" give the last period. so this rule wont be in use anymore.
than create a new rule.
after these steps when you run the settlement, system will pick up the new rule you created.

Settlement rule set to Periodic, remaining balance cannot be settled

Hi!
We are trying to settle the remaining balance of a network to another network. Previous balances were already settled before. However, upon checking the network that is to be settled, the settlement rule that was set was periodic and the date that it was last used was last March. Now that we are trying to settle the balances due to the postings for the period of April in CJ88, the message that there is no more to settle appears. Is it because of the previous settlement rules that was maintained? I was thinking of adding another rule wherein the settlement is set to FUL already. Kindly help me please. =)
Regards,
Happy

Hi HappyRod,
I am facing the similar issue in which i have some cost to settle and settlement rule that i am using is periodic. But when i try to settle the cost using ko88, it gives a message that "There is nothing to settle ".
Could you please guide me as to what you did and how did your issue get resolves. i guess i might be encountering the same issue.
regards,
Priyank
Please open a thread for your specific query. Don't activate old threads.
-Paul (moderator)
Edited by: Paul Meehan on Jan 30, 2012 11:09 AM

Automatic Generation of Settlement Rules for PM order

Hi All,
I am doing a maintenance orders settlement and I have the fallowing issue:
My client has 2 types of equipment, namely vehicles and industrial equipment. Both have particular rules.
For vehicles, we need to control all cost by an internal order
Industrial equipment costs will be control by cost center.
So, cost center is maintained for industrial equipment, and Settlement Order for vehicle equipment.
I have a unique order type for which in Settlement profile I have entered Order and Cost Center as 'Settlement Optional' and default object type as CTR.
When I create a PM order for vehicle, system cannot generate automatically the settlement rule, because in order type I have entered default object type as CTR and in equipment I just have the Settlement Order.
But if I create a PM order for industrial equipment system create automatically the settlement rule, because cost center is maintained for industrial equipment and order type has default object type as CTR.
In the allocation structure I have a receiver category for CTR and ORD.
So, Could you help me how to generate automatically settlement rule for both cases without 2 order types?
Thanks & regards,
Hélder Nunes

hi
i think it is not possible to generate settlement rule based on equipment ,if you have specified the default settlement category in IMG ,it will be generated .
check with your technical team whether user exit IWO10027 can be mapped
regards
thyagarajan

Update Settlement rule in CO01

Hello,
Does anyone know how to update the Settlement rules when creating a production order from CO01?
I have tried using badi WORKORDER_UPDATE, but the interface does not contain any Settlement rule data.
I also tried user exit IWO10027 but it was never triggered.
It is an ECC 6.0 system.
// Regards Hans

hi
An internal order is usually used as an interim collector of costs and an aid to the planning, monitoring, and controlling processes needed. When the job has been completed, you settle the costs to one or more receivers (cost center, fixed asset, profitability segment, and so on).
for furthur notes
http://help.sap.com/erp2005_ehp_03/helpdata/EN/a9/ab7422414111d182b10000e829fbfe/frameset.htm
nagesh

SETTLEMENT RULE FOR AN ORDER

How will i know settlement rule for an order is created and assigned to an order type?

Hi
If you create an order then the order status will show you whethe settlement rule is created or not the status is SETC, this means settlement rule is created,
based on the settlement profile assgined to the order in OPJH settlement rule is created.
BR
SK

Refurbishment subcon order settlement rule

Hello,
I am currently test the refurbishment subcon (using the ADSUBCON Tcode). With this method, I cannot use a refurbishment type order (e.g. PM04). I need to use a normal order type.
Issue I got here is the settlement rule. With the PM04 order, the settlement rule is defaulted to MAT (material). However, with my normal order type, i cannot set the settlement to MAT.
I did the SPRO to enable MAT as optional settlement receiver but at the order when i try to create the MAT settlement rule, i get error that MAT can only be created automatically.
Anyone know how to automatic create settlement rule with receiver MAT?

Hi Paul,
Thanks for your input.
If MAT cannot be assign manually, can IWO10027 help in this case? I have never use IWO10027 before.
I am just curious. In the SAP training manual, the recommended way to handle the refurbishment by external is via subcontracting and it specifically mention do not use refurbishment order but a "normal" order type. How can we assign MAT as receive in this case?
One way i can think of (which sounds rather silly....) is to settle everything to a refurbishment order and somehow let the refurbishment order do the proper settlement.

Maintain settlement Rule for CJ20N

Hi Experts,
How can i maintain settlement rule for sales order and item in cj20n. Is there any t.code or BAPI available..?, Please help me.
Thanks.

Hi ,
u can use these FMs K_SETTLEMENT_RULES_UPDATE, if u want to know what to pass , put a break point in this FM ,and try to create a settlement rule ? then u will come to know .
K_SETTLEMENT_RULE_GET
K_SETTLEMENT_RULE_REFRESH
K_SETTLEMENT_RULE_SAVE
K_SRULE_CREATE
K_SRULE_CREATE_WITH_SL
K_SRULE_GET_SLIST
Regards
Prabhu

Automate settlement rule

How to configure the settlement rules to be automatically created when a new project is saved such as for the AUC settlement or Requesting Cost Center?

Automatic settlement rule work for the projects where object class is other than INVESTMENT.
You have to configure in SPRO IMG->>>PS->>>Costs->>>Automatic and Periodic Allocations->>> Settlement->>> Settlement Rule for WBSE ->>> Determine Strategy for Settlement Rule.
Here you can mention your default settlement receiver as requesting cost center / responsible cost center or you can enter a settlement rule for level 1 WBS element and then copy this to all lower levels.
Assign this to Project profile in OPSA transaction under the controlling area tab Settmt rule strat. field.
Then you have to execute the transaction CJB1 / CJB2 for generating the settlement rule automatically to all the WBS elements.
You can search the forum, <link removed>
you can also refer to the online help. <link removed>
Incase of INVESTMENT object class projects, the settlement rule is automatically created by the system when you execute the settlement for project first time, the receiver will be the respective AUC.
Praveen
Edited by: b praveen savan on Sep 14, 2010 6:27 PM
Edited by: Virendra Pal on Sep 15, 2010 4:56 PM
This time I am not deleting the post and do not bank on second chances.

Delet the settlement rule

hi
How to delet the settlement rule , after realease project.
if i check in settlement rule for Activity it will show all option in disply mode .
thanks
sunil

Has settlement from the Network Activity already ran?
On the settlement rule line ....check the values in the First Used & Last Used fields
If both of these are not blank, then settlement has already ran.
To delete you would need to undo each run of settlement to remove the date.
If in Production this is probably not an option. Therefore you will need to end the existing settlement rule with an end date in end period & year.
Then create new settlement rule.
If both First Used and Last used are blank then I would try entering /SU53 into the command field to check for missing authorisations.
I am automatically generating settlement rules from Activity to parent WBS and have no problem changing or deleting the settlement rule prior to settlement running.
Steve

How to Make Settlement Rule Mandatory in Sales Order(In Acct Assigt Tab)

Hi Gurus,
I have a business requirement. For Free of charge 3rd party orders (yes they have FOC orders delivered by third party) the business wants to ensure that the Settlement rule should be mandatory. They enter cost center & receiver in the settlement rule.
i.e the order should not save till Settlement rule is maintained in the line item in the Acct Assignment tab.
Please let me know how this can be done.
1: Applied my brains on incompletion procedure but does not seems like it can be done there.
2: Is there something in CO where some setting can make it mandatory to enter settlement rule in Sales order?
3: I s there any other way in user-exits or ABAP?
4: Is there any setting in Item category(I could not locate any)?
5: Can this be done via Requirement class.
Please assist to resolve this one.

Dear,
It depends on settings in Requirement Class (OVZG) and Account Assignment Catg (AAC) in OME9
If your AAC is E in Req Class, then your sales order is a CO object.
Requirement Class in IMG can be checked - IMG > Controling > Prod Cost Planning > Cost Obj Controling > Prod Cost By Sales Order > Control of Requirement.
Or any filed any you can Make mandatory through Transaction variant SHD0.

How to display previous settlement rules (CJ70)

Similar Messages

Maybe you are looking for