How to display the year

Hi All
How can i display the year from the following query:
select
case when to_number(to_char(NTPACT,'mm'))<4 then 'Q1'
when to_number(to_char(NTPACT,'mm'))<7then 'Q2'
when to_number(to_char(NTPACT,'mm'))<10 then 'Q3'
else
'Q4'
end quarter
from testtbl
output is
Q1,Q3,Q4,Q2...............
Desire out put is:
YYQ1,YYQ3,YYQ4,YYQ2..............
Please advice me
thanks

SQL> create table testtbl (ntpact)
2 as
3   select add_months(trunc(sysdate,'mm'),-level)
4     from dual
5 connect by level <= 24
6 /
Table created.
SQL> select ntpact
2       , case when to_number(to_char(NTPACT,'mm'))<4 then 'Q1'
3         when to_number(to_char(NTPACT,'mm'))<7then 'Q2'
4         when to_number(to_char(NTPACT,'mm'))<10 then 'Q3'
5         else 'Q4'
6         end quarter
7    from testtbl
8 /
NTPACT              QU
01-06-2008 00:00:00 Q2
01-05-2008 00:00:00 Q2
01-04-2008 00:00:00 Q2
01-03-2008 00:00:00 Q1
01-02-2008 00:00:00 Q1
01-01-2008 00:00:00 Q1
01-12-2007 00:00:00 Q4
01-11-2007 00:00:00 Q4
01-10-2007 00:00:00 Q4
01-09-2007 00:00:00 Q3
01-08-2007 00:00:00 Q3
01-07-2007 00:00:00 Q3
01-06-2007 00:00:00 Q2
01-05-2007 00:00:00 Q2
01-04-2007 00:00:00 Q2
01-03-2007 00:00:00 Q1
01-02-2007 00:00:00 Q1
01-01-2007 00:00:00 Q1
01-12-2006 00:00:00 Q4
01-11-2006 00:00:00 Q4
01-10-2006 00:00:00 Q4
01-09-2006 00:00:00 Q3
01-08-2006 00:00:00 Q3
01-07-2006 00:00:00 Q3
24 rows selected.
SQL> select ntpact
2       , to_char(ntpact,'yy"Q"q') quarter
3    from testtbl
4 /
NTPACT              QUAR
01-06-2008 00:00:00 08Q2
01-05-2008 00:00:00 08Q2
01-04-2008 00:00:00 08Q2
01-03-2008 00:00:00 08Q1
01-02-2008 00:00:00 08Q1
01-01-2008 00:00:00 08Q1
01-12-2007 00:00:00 07Q4
01-11-2007 00:00:00 07Q4
01-10-2007 00:00:00 07Q4
01-09-2007 00:00:00 07Q3
01-08-2007 00:00:00 07Q3
01-07-2007 00:00:00 07Q3
01-06-2007 00:00:00 07Q2
01-05-2007 00:00:00 07Q2
01-04-2007 00:00:00 07Q2
01-03-2007 00:00:00 07Q1
01-02-2007 00:00:00 07Q1
01-01-2007 00:00:00 07Q1
01-12-2006 00:00:00 06Q4
01-11-2006 00:00:00 06Q4
01-10-2006 00:00:00 06Q4
01-09-2006 00:00:00 06Q3
01-08-2006 00:00:00 06Q3
01-07-2006 00:00:00 06Q3
24 rows selected.Regards,
Rob.

Similar Messages

How to display the Previous years

Hi
CJE0 - 12KST1A costs:budget/actual/commt/rem.plan/assd
How to display the previous years budget in above mentioned report. at present the report is showing only cumulative value of previous years,2009 and 2010.....
My requirement is from 2005 to 2009 i want display the value in this report, please through some light on this.
Thanks
S.Murali

Hi
But i want check the previous years budget for some number of projects not one by one, because the number of project are more.
The above mentioned solution is for one by one i can check the pervious years budget. But my requirement is collective.
Thanks
S.Murali

How to display the data from database(MS access) to a textbox

anyone know ?

how to display the data from database(MS access) to a
textboxThe reply hasn't changed over these years. Read the tuutorial on how to fetch the data. You can display it anywhere you feel like. :)
http://java.sun.com/docs/books/tutorial/jdbc/

In sap scripts how to display the driver program

Hi,
I Want to know the sap scripts How to display the output to driver program

Hi,
Go to NACE Transaction.
Select application for ex: if sales V1.
Click on output types.
Select the output type for ex : BA00
Double click on Processing routines.
There you can find the Driver Program name and Script/smart form name.
Reward if useful.
Thanks,
Raju

How to display the sort value in the selection screen in the report title

Dear All,
How to display the sort value in the selection screen in the report title? I have selected a value in the selection screen for sorting , but i need that values by which i have sorted with in the report title. Can you please throw some light on this!!
Good day,
Thanks and regards
Arun S

Hi Arun,
Try this.
1, Set one dynamic parameter,
2, Drag and drop that parameter into your report title.
3, Pass the value(sort value) dynamically from your application,
4, Cheers..
Other wise Try with Dataset, create a dataset and fill thev alue into that.. Then set the data source from CR designer. and darg and drop that data column into the report.
Hope this will work,
Regards,
Salah
Edited by: salahudheen muhammed on Mar 25, 2009 11:13 AM

How to display the header data on different position in alv report

hi all,
how to display the header data on different position in alv report.
for example ,
customer                                                   name
xxxx                                                         xxxx
                 vendor        name     street
                  xxxx         xxxx      xxxxx
pls   help me .

hi
as per my understanding you need to trnasfer header internal table data to pdf..
please check the following links for internal table to pdf..
Convertion of Internal table data to PDF
This link is related to ur issue
Re: how to insert the calling of the FM: OTF to PDF
Thanks

How to change the year in a range of column dates to the new year?

How to change the year in a range of column dates to the new year?

Depends on the pattern of the dates. The last procedure will work for any pattern, or no pattern at all.
For examples.the dates are assumed to be in column A, starting at A2
Sequential dates?
Enter first updated date in the first cell.
Enter =A2+1 in cell A3. Copy the cell.
Select A3 to the end of the list. Paste.
With the cells still selected, Copy, then go Edit > Paste Values.
Evenly spaced dates?
Same procedure as above, but replace +1 in the formula with + and the number of days between dates in the list.
Randomly spaced dates?
Select cell B2. Press option-left arrow to insert a (temporary) column to the left of column B.
Click on the empty cell B2 in the new column. Enter the formula below:
=DATE(YEAR(A)+1,MONTH(A),DAY(A))
Copy the cell, then select B2 - Bn where n is the last ow containing a date to be converted. Paste,
With the cells still selected, Copy.
Click on A2, then go Edit > Paste values.
Click on the column B reference tab to select all of column B.
Hover the mouse over the right end of the reference tab, and click the black triangle when it appears.
Choose Delete Column from the menu that appears.
Regards,
Barry

HOW TO DISPLAY THE TEXT ON A PARTICULAR PAGE IN SAPSCRIPTS

HI,
   HOW TO DISPLAY THE TEXT ON A PARTICULAR PAGE IN SAPSCRIPTS?

in ur script main window
/: IF &TTXSY-PAGE& = 15.
ur text or standard text
/: ENDIF.
use this.
hope it helps if any issues revert back

How to display the Buyer's signature in PO BI Publisher Report

Hi,
How to display the Buyer's signature dynamically in XMLP Purchase Order Report.
Please anybody help on this.Your help greatly appriciated.

Hi All once again
I was able to display the signature on XMLP AP Check Print Report by went through the follwoing Tim's blog http://blogs.oracle.com/xmlpublisher/2006/04/13#a12
But in Purchase Order report requirement is different. We need to display the Buyer's signature on XMLP PO Report. So, where is the best place to store the buyers signatures.(For example if we have 10 buyers with 10 signatures respectively then after approving the PO, we should display that particular buyer's signature in PO XML Publisher report).We observed that in byuers & User's form there is no attachment feature enabled.
This is an urgent requiremnt. Please help/guide/suggest to resolve this issue.
Thanks in advance.

How to display the results in order by based on search value

Hi All,
how to display the results in the below order.
CREATE TABLE TEST( SONGID NUMBER, TITLE   VARCHAR2(200))
INSERT INTO TEST(SONGID,TITLE) VALUES (10,'AHMADZAI, MIRWAIS (CA)/ MADONNA (CA)');
INSERT INTO TEST(SONGID,TITLE) VALUES (11,'CICCONE, MADONNA (CA)');
INSERT INTO TEST(SONGID,TITLE) VALUES (12,'DALLIN, MADONNA LOUISE/STOCK');
INSERT INTO TEST(SONGID,TITLE) VALUES (13,'MADONNA');
INSERT INTO TEST(SONGID,TITLE) VALUES (14,'MADONNA (A)/ AHMADZAI, MIRWAIS (C)');
INSERT INTO TEST(SONGID,TITLE) VALUES (15,'MADONNA (CA)');
INSERT INTO TEST(SONGID,TITLE) VALUES (16,'MIRWAIS AHMADZAI, MADONNA');
INSERT INTO TEST(SONGID,TITLE) VALUES (17,'MIRWAIS (CA)/ MADONNA (CA),AHMADZAI');
INSERT INTO TEST(SONGID,TITLE) VALUES (18,'MADONNA (CA),CICCONE');
SELECT *FROM TEST WHERE INSTR (TITLE, 'MADONNA') > 0
output:
SONGID     TITLE
10     AHMADZAI, MIRWAIS (CA)/ MADONNA (CA)
11     CICCONE, MADONNA (CA)
12     DALLIN, MADONNA LOUISE/STOCK
13     MADONNA
14     MADONNA (A)/ AHMADZAI, MIRWAIS (C)
15     MADONNA (CA)
16     MIRWAIS AHMADZAI, MADONNA
17     MIRWAIS (CA)/ MADONNA (CA),AHMADZAI
18     MADONNA (CA),CICCONE
Expected output :
13     MADONNA
14     MADONNA (A)/ AHMADZAI, MIRWAIS (C)
15     MADONNA (CA)
18     MADONNA (CA),CICCONE
...if user searches with 'MADONNA' , I have to display the results like title starts with 'MADONNA' first then rest of the records.
Please let me know is it possible to display the results in that order.
Regards,
Rajasekhar

This may be a bit more accurate:
SQL> SELECT *
2 FROM   TEST
3 WHERE INSTR (TITLE, 'MADONNA') > 0
4 ORDER BY INSTR (TITLE, 'MADONNA')
5           ,TITLE
6 ;
              SONGID TITLE
                  13 MADONNA
                  14 MADONNA (A)/ AHMADZAI, MIRWAIS (C)
                  15 MADONNA (CA)
                  18 MADONNA (CA),CICCONE
                  12 DALLIN, MADONNA LOUISE/STOCK
                  11 CICCONE, MADONNA (CA)
                  17 MIRWAIS (CA)/ MADONNA (CA),AHMADZAI
                  16 MIRWAIS AHMADZAI, MADONNA
                  10 AHMADZAI, MIRWAIS (CA)/ MADONNA (CA)

How to display the fields in ALV Output without using Field catalog?

How to display the fields in ALV Output without using Field catalog?
Could you pls tell me the coding?
Akshitha.

Hi,
u mean without building field catalog. is it? I that case, we can use the FM REUSE_ALV_FIELDCATALOG_MERGE.
data: itab type table of mara.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = sy-repid
i_structure_name = itab
CHANGING
ct_fieldcat = lt_fieldcat[]
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
*Pass that field catalog into the fillowing FM
call function 'REUSE_ALV_GRID_DISPLAY'
       exporting
            i_callback_program      = gd_repid
            i_grid_title            = 'REPORTING'
            is_layout              = gt_layout
            it_fieldcat             = lt_fieldcat[]
       tables
            t_outtab                = itab.

How to display the proxy settings for a specific group of servers in an OU ?

Hi,
Can anyone here please assist me in how to display the value of Proxy server settings from the computers in a specific OU member ?
$Computers = Get-ADComputer -Filter * -SearchBase "OU=Terminal Servers,OU=Servers,DC=domain,DC=com" | Where-Object { Test-Connection $_.Name -Count 1 -Quiet }
ForEach ($Computer in $Computers) {
| Export-csv "C:\Proxy-Setting-Results.csv" -Append -NoTypeInformation -UseCulture
I've done similar script for some other task but not sure how to do this for Proxy setting.
Thanks.
/* Server Support Specialist */

Proxy settings are not set in Active Directory
The below code works for 2003 servers and Win XP
$colItems = get-wmiobject -class "Win32_Proxy" -namespace "root\CIMV2" `
-computername $env:computername
foreach ($objItem in $colItems) {
write-host "Caption: " $objItem.Caption
write-host "Description: " $objItem.Description
write-host "Proxy Port Number: " $objItem.ProxyPortNumber
write-host "Proxy Server: " $objItem.ProxyServer
write-host "Server Name: " $objItem.ServerName
write-host "Setting ID: " $objItem.SettingID
write-host
You can try checking the registry values- Works in 2008 + and Windows 7
Get-Item 'HKCU:\Software\Microsoft\Windows\CurrentVersion\Internet Settings'
or use netsh
netsh winhttp show proxy -r <remotemachinename>
Regards Chen V [MCTS SharePoint 2010]

How to display the text as a Bold in the Text Element of a Smart Form

Hi,
I created one Smart Form.
In that i created the Text element.
I provide some data also in that.
It is coming as a MS WORD.
I executed my smart form.
Customer Number: &WA_KNA1-KUNNR&
it display the data of the particular customer.
But i need to display the Customer Number as BOLD or else Increase the Size.
For this also I created one SMARTSTYLE.
In that I created the Paragraph and Character Formats also.
Now i assignee that SMARTSTYLE in the Output Option Tab of the Text Element also.
But i unable to get the CUSTOMER NUMBER in Bold.
In MS WORD we have BOLD button.
I selected the Text and Press the BOLD button. At that time it is Highlighted.
Whenever i press the SAVE Button.
Then it is not saved with BOLD.
It is coming in Normal Format.
In the ECC 6.0. I am unable to get the Text as a BOLD.
This text Element is like a MS WORD.
Can you please tell me how to display the Data with BOLD. please tell me. I am unable to get that one.
Thank You.
Regards,
B. Krishna.

Hi,
Check where u have given BOLD. In character Format or in Paragraph format.
In SMART FORM,
1. Change to OLD EDITOR if u are confused with the new one.
        (This can be done by clicking the button left to new editor ).
2. If it is PARAGRAPH FORMAT,
           Give the name of paragraph format in the editor.
            P1         &WA_KNA1-KUNNR&
    If it is CHARACTER FORMAT,
                         <C1> &WA_KNA1-KUNNR&
Thanks,
Nithya.

How to display the time 00:00:00 as blank?

Dear Friends,
I have created a new field GDF_9000_CREATED_AT in the normal screen (dynpro), the format is TIMS, however, when there is no value for it, is always display like "00:00:00" on the screen.
So how to display the time 00:00:00 as blank in the normal screen (dynpro) when there is no value for it?
Thanks a lot!!

In screen PBO module:
        LOOP AT SCREEN.
          if screen-name EQ 'my_time' AND my_time EQ time_zero.
            screen-invisible = 'X'.
            screen-active = 0.
            MODIFY SCREEN.
          endif.
        ENDLOOP.
I don't try this, but i think is true...
Edited by: Marco Modenese on May 7, 2009 10:36 AM
Edited by: Marco Modenese on May 7, 2009 10:36 AM

How to display the name of my metric in a PivotTable.

Hi I am working with OBIEE Plus
How to display the name of my metric in a PivotTable.
Why when I add a field to the sector of the measures in a PivotTable field name disappears.
Help please
Thanks beforehand

Where are your 'measure labels' ? These show what the metric is.

How to display the year

Similar Messages

Maybe you are looking for