How to do Balance Migration

Hi All,
We have a balance called "Personal Loan Payments" with dimension "Element Entry Inception To Date" which is being feed by element "Personal Loan Payment" through input Value "Pay value". I want to initialize or update the amount of this balance to 5000 for an employee 12345. Could you please let m eknow the steps to achieve this though backend or frontend.
Thanks,
Avinash

Hi Sajid,
You need to go through your FF code and amend it accordingly to meet the requirement or bypass for one month (balance migration month).
I hard coded the ENTRY_START_DATE to '01-07-2012' to avoid execution of some line in first month of balance migration.
If your problem is something else, will suggest to raise new thred for better response.
Thanks,
Avinash

Similar Messages

  • GL Balances migration

    Hi All,
    I am working on GL Balance migration. It is a migration from SAP 4.5B to SAP ECC 6.0
    In LSMW different methods can be used to upload data. Among the below mentioned methods what is the best method for GL Balance migration?
    1.Direct Input Method
    2.IDoc
    3.BAPI
    4.Batch Input
    Please let me know how to determine which is the best method.
    Also please let me know the Standard program name/Message Type/Bapi name/Transaction code with respect to Direct input/Idoc/Bapi/Batch Input
    Regards,
    Subathra

    Best method depends on the size of the data & requirements.
    If the data file is going to be simple , and if u think u can load the data using direct input method, u can go for the same.
    Tables
    SKA1 .. Chart of Account.
    SKB1 .. Company code data.
    Batch Input
    Tcode: FS00
    Standard object:   you can for this one - GL master data
    Read the documentation of program RFBISA00
    Object 0010 GL A/C Master Record
    Method 0001 Hier. structure
    Program Name RFBISA00
    Program Type B Batch Input
    IDOC method
    message : ACC_GL_POSTING
    message : ACC_GL_POSTING_REVERSE  for reversal of GL
    IDOC method is used when we have large data to be migrated . Monitoring and reprocessing could be easy in IDOC method.
    SAP provides standard programs and function module to extract and transfer the FI data.
    In addition, you only need to setup the ALE and IDoc configuration. IDoc has excellent error handing and has capability to reprocess an error (if any). With batch input program, you need to process the whole input file or you need to recreate the file with error information.
    BAPI
    Business object : BUS6030
    method : POST
    Also check out the BAPI  BAPI_ACC_GL_POSTING_POST
    Regards
    Vivek
    please reward points if this is useful..

  • How do I use Migration Assistant to get my Mail and Keychain settings from

    How do I use Migration Assistant to get my Mail and Keychain settings from my Power Mac G5 2.3Ghz? I just purchased a new 2.5 MacBook Pro which will be delivered tomorrow, and I want to to know how to transfer Mail and Keychain?
    Thank You in advance for your reading and replying.
    Kindest Regards,
    Sebastian

    Rather than using Migration Assistant, which can cause trouble with the PPC to Intel change, simply boot the G5 in FireWire target disk mode and manually transfer the following:
    /Home/Library/Keychains (copy the whole folder)
    /Home/Library/Mail (copy the whole folder)
    /Home/Library/Preferences/com.apple.mail.plist
    You might want to look over Kappy's helpful guide for migrating, which covers the full process for a manual migration (including the above files).
    Hope this helps...

  • How to get balance sheet report for profit centers

    hi
    how to get balance sheet report for profit centers, is there any transcation code to get that report or i need to create a report painter report for this

    Hi,
    You can use T. code KE5Z for actual line items.
    More to this you can use program RFBILA10 (Use T. code SE38 and program RFBILA10) for complete blance sheet.
    The transaction is for special purpose ledger but this program RFBILA10 can be used for profit center balance also.
    In selection, you can give ledger name which is generally 8A for profit center ledger.
    Reg

  • SO Opening Balances Migration - Implementation

    Hi Gurus,
    I am in migration of pen sales order / Open Purchase Orders from legacy system to Oracle system.
    Cut-off date they provided open SO/POs.
    Please clarify below doubts:
    1. Few line are shipped partially, how to enter partially shipped sales order. SO Line for Qty 100 pcs, shipped 75, pending 25 pcs. which one need to enter in system?
    2. Few lines are customer requested cancellation, is it to cancel from excel template before migrating or need to cancel from legacy system?
    3. Few line price has been changed on agreed date, while migrating selling price more? Ex: SO req date 1 Jan 13 Item A Selling price $5, while migrating open SO price is changed to $9. Is it possible to change before 4. migration into system
    4. Few lines partially shipped with old price, pending lines to be shipped with high price?
    5. Few lines customer requested more Quantity with Same PO?
    6. Few lines are shipped but not created Invoice in system?
    7. Few orders are cancelled by customer?
    Customer provide Open SO/POs as well as provided above modifications SO/POs, how to handle before migration.
    Highly appreciate if you provide clarification and any useful document on this scenarios.
    Regards
    AK

    Hi AK,
    I guess you need to cancel all the pending transactions in the legacy systems.
    its difficult to handle these types of transactions.
    Try to create all new transactions in Oracle with the pending Qty.
    I will still try to find out some alternates from MOS and will update you if I find any.
    Thanks
    -Arif.

  • How to - user profile migration 6.0 -- 6.0

    How to - user profile migration 6.0 --> 6.0
    We have an existing 6.0 portal deployed to a fairly large number of users internal to our company. We have been activly developing for our next release which includes tabs and a few new custom providers and channels. The question is what is the best/proper way to migrate the users profiles from one machine to another?
    The version upgrade will be taking place on a different machine than our existing portal deployment.
    So:
    v1.0 on machine A user customizations --> v1.1 on machine B
    Can we just perform an ldiff export on machine A then import that into machine B, then deploy our changes?

    IMO there is just one way that works:
    - first step: look for running forms services (forms server or more), stop them
    - second step: go to the registry, erase the whole key: hkey_local_machine/software/oracle
    -delete the whole directory with forms.
    Its brute force, I know; but it works within 5 minutes!!

  • How can I use migration assistant to load my new Macbook Air?

    How do I use migration assistant to load my new Macbook Air?  Can this be done only wirelessly?

    No, you can transfer from a Mac wirelessly, wired ethernet, Thunderbolt or Firewire. Your older Mac must have the same connection, but you can use adaptors if necessary. For example, you can use an Ethernet cable with an Ethernet-Thunderbolt adaptor if your older Mac has an ethernet port.
    Wireless tends to be pretty slow (can take many hours) so it's recommended to choose a wired connection whenever you can.
    Here's more information:
    http://support.apple.com/kb/HT4889
    Matt

  • HT4889 How do you only migrate pictures and music? I do not want to migrate anything else. Thank you for your time.

    How do you only migrate pictures and music? I do not want to migrate anything else. Thank you for your time.

    Welcome to the Apple Support Communities
    Migration Assistant will ask you what you want to migrate from your old Macintosh, so select just Pictures and Music

  • How to load balance runbooks?

    Hi,
    Now I have successed to deploy an seccond Runbook Server in an test environment. But I have not fully understanding how the runbooks run on the primary vs standby. And I know that by default one Runbook Server can handle 50 runbooks, and how to scal out
    runbooks?
    How to load balance runbooks?
    How to fail over runbooks?
    /SaiTech

    you can change how many concurrent runbooks are allowed to run on a single runbook server. 50 is just a default value.
    you can assign a runbook to run on a specific runbook server (or more). this is the simplest way to load balance.
    runbooks will failover automatically. do note that the runbook will start all over, hence you need to put in safeguards in your runbook. word of adwise is to keep runbooks small and chain them together. This makes them easier to recover.
    Cheers,
    Anders Spælling
    Senior Consultant
    Blog:  
    Twitter:   LinkedIn:
    Please remember to 'Propose as answer' if you find a reply helpful

  • How to load balance two link (resilient link)

    How to load balance (if can) or failover two Fiber channel like as below?
    interface GigabitEthernet0/1
    switchport mode trunk
    channel-group 1 mode active
    channel-protocol lacp
    interface GigabitEthernet0/2
    switchport mode trunk
    channel-group 1 mode active
    channel-protocol lacp

    Hi
    You can use this "port-channel load-balance src-dst-ip", this will do a XOR on source & destination IP addresses and choose the interface G0/1 if the first bit of the result is 0 or the interface G0/2 if the first bit of the result is 1.
    But you can check the path used with that command: "sh etherchannel 1 port-channel"
    You can load balance with the mac-addresses too (it is the default mode I think)
    http://www.cisco.com/warp/public/473/4.html
    Rate if it helps.
    MB

  • How the Load balancing happens in CPO

    Hi All,
    On what bases the process engine selects the process or request and how the load balancing happens.

    Hi!
    I am a little confused by the question (as it refers to "request"), but I am going to assume that you are asking how a High Availability Process Orchestrator environment with several servers chooses which processes running on which server.
    The answer to that question is...
    In general, processes to be executed are split equally between all servers. The only piece of data being taken into account during process instance assignment is the current load on the servers (as counted by the number of top-level processes, not counting child processes). For example, suppose that there are 3 servers in the environment, and server A is running 5 top-level processes, servers B & C are running 3 top-level processes. When new process is started (e.g. on a schedule or manually or triggered via an external event), it will be assigned to either server B or server C for execution, because servers B & C have less load. If under the same circumstances (A:5, B:3, C:3), there are 4 processes started at the same time. When the work is distributed, the total expected work 5+3+3=11 (existing work) and 4 (new work) will be distributed equally with, with servers B&C each getting 2 new processes.
    This is a general load balancing algorithms used by the servers in HA environment to decide which server runs which process instance.
    There are other factors that come into play, as some processes/activities can only run on server A or server B for technical limitations (e.g. SAP work against a particular SAP System can only be executed from one server in the environment). When those come into play, the work may end up distributed unevenly.
    Note that available memory, CPU load, or disk space on servers are not directly taken into account during load distribution.

  • How can i use migration assistant from a Power PC G4 powerbook?

    How can i use migration assistant from a Power PC G4 laptop that can't run 10.5 to a new mini running Lion? Mini's MA says I have to upgrade the laptop's MA but the upgrade requires 10.5 as a minimum
    help,please
    jan

    That is correct. You'll need either an ethernet cable or a firwire cable and a firewire to thunderbolt adapter to connect the two macs together. Here's info on Migration/Setup assistant
    http://support.apple.com/kb/HT4889?viewlocale=en_US&locale=en_US

  • How to show balance insurance amount using FMS?

    HI,
    If goods received in good condition from the Advance insurance amount,the Purchase Invoice amount has to be deducted continuously.But when they adding one more AP Invoice, how to show balance insurance amount in that screen. if they reached ZERO amount they have to add Insurance amount. is it possible to achieve this through FMS?
    Regards
    KMJ

    Hi,
    Client is insuring certain amount before purchasing the item (Sum assured Value)
    When they creating AP Invoice, Invoice document total  has to be deducted from the Sum assured Value. Provision has to be made to add the additional amount to Sum assured Value.
    Is it possible to achieve through FMS?
    Right now am created 3 UDF in marketing documents-title, which are
    1.Sum assured Value
    2.Present balance
    3.Current balance amount,how to add the additional amount to Sum assured Value.
    You have any other idea's...No screen shot as such
    Regards
    KMJ

  • HT3231 how long should a migration take? Mine says about 24 hours.

    How long should a migration take? Mine says about 24 hours.

    I would always recommend migrating from a Time Machine backup drive...it's the most reliable (and fastest) means of moving everything over...and it's the most convenient, since you don't need to have two computers up and running to accomplish the backup.
    If you'd like to some good reading on migrating everything over, I highly recommend the following site:
    http://pondini.org/OSX/Home.html
    I hope this helps! 
    Congratulations on your new iMac.

  • HT4796 how long does the migration process take?

    How long does the migration process take? And can you speed it up?

    That's rather like asking how long is a piece of string.
    It depends on how much you've got to migrate. Make sure that you run software update on the old machine before you start the migration. Failure to do this is one of the biggest causes of problems people have with this process.

Maybe you are looking for

  • How do I convert a pdf file to a Word or Excel document?

    How do I convert a pdf file to a Word or Excel document using the Adobe software?

  • Inserting image in rtf doc

    Hi all, i am trying to make my own rtf editor , I've read the most of the toppics in this forum on this issue, but I'm stucked on inserting the hex Data into the document. Do I actually need to override ImageView? I found a method in RTFReader (insta

  • View pics as list of events in iPhoto

    I was searching and found this in another post, so wanted to share, with 1 small correction.   If you want to view your Events as a list instead of the default thumbnail view, you can switch to the Photos view (instead of Event view) with event title

  • Iphone many issues.. Over priced faulty crap? I think so

    i got a new iphone for the firet time a month ago . and the power button got stuck .today it just didnt work at all i plugged it in expecting it to show its charging and notning! keep in mind its in perfect condition other than the faulty button and

  • To use JCE in J2ME WTK2.2

    hi All, I need to use PBE based DES to encryt/decrypt data in my MIDP application, I tried bouncyCastle but I couldn't figure out how to use the classes. so I tried using JCE to implement the function. I copied all the jar files in to the myapp lib,