How To Edit A Film - Transitions & Composit

hi,
i'm a newbie at editing films. so i'd be appreciated if you could help me.
right now the problem is:
i don't know when to use "transitions", and when to just "compositing".
for example:
i'm editing a film i took when i was in hong kong.
so how do i "add transitions" & "compositing" SYSTEMLY.
or
i should say: "IN WHAT KIND OF CERCUMSTANCES, i add trasition." and "in what kind of cercumstances i use compositing" to add things like, the name of the place.
ed
ps. transition is like adding a cross dissov dipping to colors between two places.
pps. composit is like add "explanations" of a place in the film

JhnD wrote:
.. do you know any "good" sites that teaches film editing?
your living room .. your TV shows tons of good (and not so good) editing ...
rule is: no rules.
the laws-of-editing, as a Sergei Eisenstein proclaimed in the 20ies of last cent. are still in use - but are also widely 'broken'.
editing creates the style and tone of your piece - hasty, 'trashy' as in Skater Movies, calm, ambient as in National Geographic landscape editorials.. imagine the pic of a tree, underlaid with some gloomy chords of an orchestra or a happy flute; same tree with title 'early 19th century - hanging was usual' or 'here asked Grandpa Grandma'; an epic zoom into the tree or a 'jump cut' to a branch with some happy squirrel sitting on it .. etc.etc.
I follow a few simple rules:
• film is 'flowing' - no rewind, no back-browsing allowed. can your audience follow you, your content, your story, your impressions...? this is essential, when adding titles: does it distract from what's happening in the pic? long enough? big enough? does it give info? or is it adding some value (s. following points)?
• less is more - keep it short, simple, easy. do we really need this piece, this clip, this element?
• why do you add this? - for me, all elements should have a need in my project; a title can set-up a story ('while mom slept, the elfs start their work ...'), add info ('the owner of the wreck'), can tell another story ('two years later, this area is a supermarket"); a dancing crowd is a good illustration of 'being happy' on that wedding; a blossom in the wind is a good illustration of 'a calm morning'; .. but there's no need to torture my audience with Uncle Willy's 20min speech +in toto+ ..

Similar Messages

How to Edit Titles, Transitions, and Music in a Copy of an iMovie Project?

23 December 2009
Dear Mac Users:
Happy Holidays! I am writing to find out how to edit a copy of an iMovie project. A friend made an
iMovie (project) on his MacBook Pro and sent it to me as an MPEG4 video file. I opened that MPEG4 video file in iMovie on my MacBook Pro and dragged it into a new project in my Project Library--we
are both using iMovie '09.
Is there any way that I can view the title, transition, and music buttons/icons/markers that my friend used to create this particular iMovie project so that I can select them and make changes to the titles, transitions, and music? Primarily, I want to change the titles in this particular iMovie project, but do not see the buttons/icons/markers that are associated with the original iMovie project that my friend created. Is there any way that I can make changes to the titles and transitions that appear in this project on my computer?
SIncerely,
Corey

*24 December 2009*
*Dear Mac Users:*
Hello. Thanks to AppleMan1958 for answering my question about how to edit an iMovie project
on another computer.
Here is a question related to the process of transferring the iMovie '09 project file from my friend's
computer to an external drive so that I can edit that project in iMovie '09 on my MacBook Pro:
How do I know if my Smart Disk FireLite portable external drive is formatted to MAC OS X Extended (journaled)? How I do format this Smart Disk FireLite USBFLB80C to MAC OS X Extended (journaled)?
When I connect the Smart Disk FireLite to my MacBook Pro via USB, open iMovie '09, and select View
Events By Disk or rather "Group Events By Disk," an icon for the FireLite external drive appears, but there is a yellow triangle with a black exclamation mark on the icon for the external drive. What does this "warning" mean? There are MP3s of music on the same external drive and they open just fine in iTunes. The one iMovie project file that is already on the drive will not open up in iMovie.
So, how do I properly format this external drive in order to transfer an iMovie project file from my friend's computer so that I can edit it on my MacBook Pro using iMovie '09?
Sincerely,
Corey

How to edit JVC/Panasonic/Canon .mod video in Windows Movie Maker then upload to YouTube for sharing

Quick View:
Part 1: How to import .mod video to Windows Movie Maker
Part 2: How to edit the video with Windows Movie Maker
Part 3: How to upload your video to YouTube
Know More:
1. Which Camcorders record video in .MOD type?
2. What file types are supported by Windows Movie Maker?
3. What file types are supported by YouTube?
Part 1: How to import .mod video to Windows Movie Maker
Step 1: Load files
First copy the MOD file from your video camera to your hard drive, then download, install and run MOD Converter, click the "Add Files" button to browse your computer hard disc and load the MOD/TOD video files you want to convert to the program.
Step 2: Output Setting
In the bottom of the main interface, select an output format supported by Windows Movie Maker for each video file and specify a directory on your computer to save the output files.
Step 3: Start convert
Click "Start" button on right bottom of the main interface, you are allowed to start conversion.
Step 4: Import converted video to Windows Movie Maker
Click on "File". Then click on "Import". A window will appear. In the window, navigate to the video clip you converted just now. Then double click on the file. You'll see the icon for the file in your Windows Movie Maker "Collections".
Part 2: How to edit the video with Windows Movie Maker
Step 1: Add transitions and special effects
In the Movie Tasks pane, under Edit Movie, click View video transitions.
Preview transitions by double-clicking them and watching the Preview Monitor. Once you've found a transition you like, drag it from the Video Transitions pane, under Edit Movie pane to the box between two of your clips. This inserts the transition between the two clips.
Step 2: Add titles and credits
If you want to add a title before, after, or on top of a clip, click the clip on the storyboard or timeline.
In the Movie Tasks pane, under Edit Movie, click Make titles or credits.
Step 3: Add Music
In the Movie Tasks pane in Movie Maker, under Capture Video, click Import audio or music.
In the Import File dialog box, click the name of the song you want to use in the background. Then click Import. This adds your song to your collection but does not add it to your video. Drag the song from the collection to the video clip where you want the music to start playing.
Step 4: Add narration
If you have a desktop computer, connect a microphone. Microphones are available from most electronics stores. If you have a portable computer, you can use the built-in microphone. However, you will get a better-quality recording if you connect an external microphone. In Movie Maker, click the Tools menu, and then click Narrate Timeline. On the timeline, click the clip you want to narrate. You can narrate clips one at a time, or you can narrate the entire movie all at once. If you narrate individual clips, you can rearrange them later and keep your narration synchronized. If the narration is too loud or too soft in comparison to the movie, right-click the narration on your timeline, and then click Volume.
Step 5: To save your movie to your computer
In the Movie Tasks pane, under Finish Movie, click Save to my computer.
The Save Movie Wizard appears. On the Save Movie File page, type a name for your movie. You can also choose a folder to save it in by clicking the Browse button, but My Videos (the default) is usually the best place to save your movie. Then click Next. On the Movie Setting page, click Next to accept the default setting of Best quality for playback on my computer.
Movie Maker saves your movie, which might take several minutes. On the Completing the Save Movie Wizard page, click Finish. If Play movie when I click Finish was selected (it is selected by default), the movie will automatically play in Windows Media Player. Now you can watch your videos anytime by opening your My Videos folder and double-clicking your movie.
Part 3: How to upload my video to YouTube
A video file should meet the following requirements so that it can be uploaded to YouTube site.
1. In an acceptable format: WMV, MPEG4, MOV, AVI and MPEG.
2. Video length is shorter 10 minutes.
3. File size is smaller than 1GB.
Step 1: Sign up a YouTube account or Gmail account, then click the Upload button on any YouTube web page. See the figure below:
Step 2: Type in the information of your video file, including Title, Description, Category and tags. To increase the chances that your video can be easily found, you should put as much information as possible.
Step 3: Set this video to be public or private.
Step 4: Click the "Upload a video" button. When you see the next window, click the "Browse" button to select the video file you want to upload. Then click the "Upload Video" button to upload it. After the upload is finished, you will see the completion page. See the figure below:
Step 5: Click "My Videos" and you will see the video.
Know More:
1. Which Camcorders record video in .MOD type?
MOD is the video file type used on many digital camcorders, such as the JVC Everio, the Canon FS100 and the Panasonic D-Snap SD-card camcorders. Accompanying the MOD video file, there exists MOI file that stands for the index file for MOD.
2. What file types are supported by Windows Movie Maker?
You can import files with the following file name extensions into Windows Movie Maker to use in your project:
Video files: .avi, .wmv, .mpeg, .mpg., .asf, m1v, .mp2, .mp2v, .mpe, , .mpv2, and .wm.
Audio files: .mp3, .wav, wma, .mp2, .aiff, .aif, .aifc,.asf, .au,.mpa, and .snd.
Picture files:.jpeg, .jpg, .jpe, .png, .bmp, .dib, .emf, .gif, .jfif,.tif, .tiff, and .wmf
3. What file types are supported by YouTube?
YouTube accepts a wide range of video file formats.The video files below are all accepted by YouTube. Some video formats work best and are most compatible with certain computers, software or devices. Windows Media Video (.WMV)
.3GP (cell phones)
.AVI (windows)
.MOV (mac)
.MP4 (ipod/psp)
.MPEG
.FLV (adobe flash)
.SWF (shockwave flash)v
.MKV (h.264) If you do not think your current video file format is recognized by YouTube, you may get the best uploading results from converting your file to MPEG4 video with MP3 audio.

I prefer this
iPad Manager software, with the assistance of iPad Manager, you can make iPhone ringtone, connect your PC to iPad to backup iPad files to Computer directly, import computer file or folder to iPad.
Furthermore, it's easy to convert DVD/video to iPad.
This versatile iPad Manager can help you transfer videos, songs, photos from computer to iPad and from iPad to PC in fastest speed. Have a try with this tool and manage your iPad, iPod, iPhone in a much easier way.
* Convert DVD/video to iPad
* Backup iPad files to PC
* Import computer file or folder to iPad
iPod Manager
iPod Video Converter
DVD to iPhone Converter
iPod Mate

I recently had some 8mm film transferred to DVD. I am trying to edit the film clips using Premier Elements 4.0. Some of the film clips copy into the project but others don't. I tried copying the VOB filed onto my hard drive and then changing the file ext

I recently had some 8mm film transferred to DVD. I am trying to edit the film clips using Premier Elements 4.0. so I can reburn the films on a single BluRay disc. Some of the film clips copy into the project but others don't. I tried copying the VOB filed onto my hard drive and then changing the file extensions on the VOB files to MPEG but this was no help. Some of the VOB files contain numerous film clips but my software does not appear to be able to recognize them as such. I need to know if replacing my old Premier Elements with the new Version 13 would solve this problem or not. Any advice would be greatly appreciated!
Bob

Bob
What do you have now.....
What computer operating system do you have?
We can go into the finer points of source and your intentions, but for now it would appear that you are using SD 4:3 source media to get to a HD 16:9 result. Lots to discuss in this regard.
What was given to you on the DVD disc? DVD-VIDEO 4:3 or something else?
If DVD-VIDEO on DVD disc, you should expect to find on the disc a folder named VIDEO_TS. That is your target for your video files.
If you were given a DVD-VIDEO on DVD disc, then all you want from it are the video files, specifically
VTS_01_1.VOB, VTS_01_2.VOB, and so on through that series until possibly getting to
VTS_02_1.VOB, and so on. How many files you have beyond the VTS_01_1.VOB file will depend on the size of the DVD-VIDEO.
Does the above scenario apply to you?
The alternative might be someone giving a DVD disc (data disc) which contains just the VTS files mentioned which were copied from
the VIDEO_TS Folder. So, you do not get the whole VIDEO_TS Folder, just the essential video files. Does this scenario apply to you.
I see no need to replace your Premiere Elements 4 with a later version unless you have a huge project and need a later version that will be a 64 bit application running specifically on Windows 7, 8, or 8.1 64 bit computer.
Consider...Premiere Elements 4 and if you have DVD-VIDEO on DVD....
1. Place the DVD disc in the burner tray
2. Open Premiere Elements 4 and set the project preset for NTSC DV Standard (assuming you are working in a NTSC setup)
3. Go to
Get Media
"DVD, Digital Camera, Mobile Phone, Hard Drive Camcorder, Card Reader"
"Adobe Premiere Elements - Media Downloader" and its Advanced dialog.
Set the Source in the latter dialog for the drive which has your DVD disc inserted in its tray
You should see your VTS_01_1.VOB thumbnail in the "Adobe Premiere Elements - Media Downloader" Advanced dialog.
With this VOB selected, click on Get Media to get the file from there into the project.
Should work fine.
Complications may be involved if the people who processed your footage gave you something other what is described above.
Please review and consider, and then we can plan our project strategy accordingly.
Thank you.
ATR

How to add multiple audio transitions

I know how to add multiple video transitions to a whole series of clips, but I want to add a cross fade to every audio clip in the sequence....how can I do this if at all, or is it not possible? Thanks

I'm suspecting that you don't have the destination tabs set correctly when you drag the audio clips to the canvas overlays.
Destination & Source tabs are the tabs located at the left side of the timeline. When you want to add audio cross fades to your audio clips, do the following:
1. Set the played at the beginning of the sequence.
2. Click the video source tab to disconnect it from the video track.
3. Verify that the audio source tabs are connected to the audio tracks that you want the audio edited to.
4. Select your audio clips.
5. Drag the selected audio clips to the Overwrite with Transition overlay in the canvas.

How to modify a default transition?

how to do you change the values for the default transition?
for exmple, i want to apply a cross dissolve to a series of clips. but i want to change
the duration of the cross-dissolve before i apply this transition.
i can see how to edit a single instance of the transition, but i cannot see how to change
that for all instances.
thanks in advance.
rob

thanks. it seemed like it worked. once. but when i tried to modify the default trans
ition time, it would not accept the new value.
also can you explain what is the difference between the unit that are used.
the entry screen asks for frames, but if you look at the duration in the effects
edit window the units appear to be min.sec.micros.
thanks,
rob

How to edit template for report generator in stimulus profile editor in Veristand 2011?

How to edit template for report generator in stimulus profile editor in veristand 2011?
We are using Veristand 2011.When we run any sequence in stimulus profle editor,we get test results in form of ATML file.
We want to customise the template for this test result generation as per our requirement.
For example:
Test case No.: Description of test case.
Objectives: Explanation of objectives.
Result: Passed/ Failed.
Graph: If any.
Please suggest how to do this.

You cant really change too much in the report, you can customize TRML.xsl which is created every time in the Test Results\UUT 1 folder and that would give you some flexibility on what is shown. I dont know what a xsl is actually able to do in terms of composing data from multiple files (if at all possible) but it definitely allows you to change the visual format of the existing xml data.
Otherwise I modified the xsl to customize the look of the xml report when opened in a browser to have less clutter and some coloring on the Pass/Fail but, the reports are XML files anyway so it's easy to extract data out of them and you can probably write your own report creation tool to compose the report in whatever format you like.

How to edit in proxy mode in cs6

Hi,
i am doing My first feature film edit in premiere cs6 it's red footage 2k,i am new to edit r3d files in cs6 can any one help me the best way to edit my film ( do i edit directly 2k footage or edit in proxy?)

Run the following test:
- import several R3D footages into a PrPro project;
- drop them into the timeline (I assume you know how to create a sequence, which matches your footages);
- try to play the timeline back. If you have some issues, set the Playback Resolution to 1/2 (I also assume you know how to change the Playback Resolution) and try to play the timeline back again. If you still have playback issues, set the Playback Resolution to 1/4.
Hope the above is clear enough. If you have some questions after performing the test, please, be specific and as detailed as possible.

Just edited 20 film in FCPx all about 6 mins long all on 1 x 250gb flash drive Now i have another 10 to do but have no room on that drive. So i have been using my new 2tb drive to do the next 10 films with the footage on that drive, but i need elements f

Just edited 20 film in FCPx all about 6 mins long all on 1 x 250gb flash drive
Now i have another 10 to do but have no room on that drive.
So i have been using my new 2tb drive to do the next 10 films with the footage on that drive, but i need elements from the first 20 films ie; graphics, common film elements etc to be added to the new 10 films.
So I have copied all the footage, events and project folders from the 20 edited films over to my 2tb drive in a separate folder - ejected the 250gb drive (as i only have 2 thunderbolt slots and one is used for a 27 inch monitor on my macbook pro)
.......my question is how do i load all of the 20 films into my project library so i can see all of the 30 films at once so i can copy and paste form one film to another - is this possible? and withlout messing up lol

// any reason, why you color your post to 'invisible' low contrasted colors?? //
I'm confused:
by concept, there's Events and there's Projects.
Events and Projects can be internal or on any ext. drive.
You can use any Event in any Project.
… so, why is the 'location' of your files on any relevance for your Projects ??
Or, do you want to re-import done-Projects as 'Events'? Export,Import, done… (??)
… sorry, maybe I'm just lost intranslation

How to check the Conditional transition while submit the jsp as screenflo

Hi All,
I want to know that how to check the conditional transition, which result is used to decide the next Activity while submit the JSP as Screen Flows
Edited by bpmvasu at 03/27/2007 11:14 PM

Hi,
Unlike BPM Object Presentations where the 'selectedButton' is automatically assigned to the predefined screenflow 'result' variable, when using JSP Persentations you need to do the mapping yourself (I don't think there is a way around this).
Assuming you're using a JSP Presentation with a Fuego Object Interactive Call, click the 'Advanced' button at the bottom of the Main Task dialog.
Select the 'showOut' argument set, add a new argument mapping. Select 'result' from the Screenflow's instance variables and map it to 'parameters["paramName"]'. Where paramName is the name of the HTML submit input element in your JSP.
Hope this helps,
Tim

Editing a film with IMOVIE and create a DVD memu with IDVD

Dear all,
I edited a film with Imovie (with music, picture effects...). Now I try to create a DVD memu with IDV. For example, for a trip, I want to create a main menu (Australia) and sub menus (Sydney, Red center...). With this sub menu I want to attach some specifics sequences of my film edited with IMovie.
I export the film from Imovie but when I try to use it with IDVD I have only one file. So I cannot create a menu and chose different sequence.
Could you please explain to me how to obtain sequences edited on IDVD. I can see some sequences on IDVD but it is the uncut movie.

I had the same question about iMovie'08 a few days ago. You need to add the chapters outside iMovie'08. I found this freeware at http://www.applesolutions.com/bantha/MH.html and it worked well for me.
Basically it opens your movie file exported from iMovie. You select manually the location of each chapter, then save the file again. When you drop this new file onto iDVD, the expected PLAY and Scene Selection buttons appear as expected. The instructions on the site are easy to follow.
Alternatively, there is a also a separate hack to edit the ProjectData file located inside the iDVD project package, but this did not work properly for me. I have not tried the GarageBand hint.

How to edit USER profiles ?

Hi, friend
i am newbee to JSP technology.
NOw i made some customers database and when fire a query
they are listed in one table.
like below
Customer_ID CustName CustCity Mobile
now i want that when perticular customer id is clicked on the table displayed, it should open that customer page to be edit.
How to achieve that ?
i mean each CUSTOMER ID field should be in link ( hyperlink) format
WHAT TO DO ? and HOW TO ACHIEVE IT
and HOW TO EDIT DATA IF PAGE IS OPENED.
PLEASE DEAR oneS.
SOlve my confusion.
Thanks

I am posting my Both Pages to you
========================================
<%@page contentType="text/html"%>
<%@page pageEncoding="UTF-8"%>
<%@ include file="dbServer.jsp"%>
<%@ page errorPage="loginerror.jsp" %>
<%@ page import="java.util.*" %>
<%
        String user = (String)session.getAttribute("username");
        String dist =(String)session.getAttribute("district");
        String talu =(String)session.getAttribute("taluka");
        String vil =(String)session.getAttribute("village");
         if(session.isNew() || user != null)
        {    System.out.println("admin- session is new");    }
        else
                response.sendRedirect("login.jsp");
%>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />
<title>userSelection</title>
<style type="text/css">

</style>
</head>
<body>
<form method=post name="form2" id="cid">
<table width="100%" border="1" align="center" cellpadding="2" cellspacing="0">
    <tr>
        <td><div align="center"><span class="style1">Fortification System </span></div></td>
    </tr>
</table>
<table width="100%" height="72" border="1" cellpadding="2" cellspacing="0">
    <tr>
        <td bgcolor="#CCCCCC"> </td>
    </tr>
</table>
<table width="100%" border="1" align="center" cellpadding="2" cellspacing="0">
    <tr>
        <td width="9%" height="25" bgcolor="#FFFFCC"> </td>
        <td width="64%" bgcolor="#FFFFCC" class="style1"><div align="left">
                <p><span class="style16">Welcome :</span> <strong><span class="style15"><%=user %></span> !</strong></p>
        </div></td>
        <td width="27%" bgcolor="#FFFFCC"><div align="left"><span class="style19"><a href="logout.jsp" class="style10">Logout</a></span></div></td>
    </tr>
</table>
<table width="44%" border="0" align="center" cellpadding="2" cellspacing="0" class="style10">
    <tr>
        <td width="51%" bgcolor="#CCFFFF" class="style11"> </td>
        <td width="49%" bgcolor="#CCFFFF" class="style11"> </td>
    </tr>
    <tr>
        <td colspan="2" bgcolor="#33FFFF"><div align="center" class="style20">Fair Price Shop Owners </div>      </td>
    </tr>
    <tr>
        <td bgcolor="#CCFFFF"> </td>
        <td bgcolor="#CCFFFF"> </td>
    </tr>
</table>
<p align="center" class="style21"><%=dist%> > <%=talu%> > <%=vil%> </p>
<table width="84%" border="1" align="center" cellpadding="2" cellspacing="0">
<tr bgcolor="#CEFEC2" class="style10">
    <td width="10%"><div align="left"><strong>FPS ID </strong></div></td>
    <td width="14%"><div align="left"><strong>ReceiveDate</strong></div></td>
    <td width="20%"><div align="left"><strong>Receive Quantity </strong></div></td>
    <td width="15%"><div align="left"><strong>Lot Number </strong></div></td>
    <td width="20%"><div align="left"><strong>Distribution Date </strong></div></td>
    <td width="21%"><div align="left"><strong>Quantity Supplied </strong></div></td>
</tr>
<%
        String q ="SELECT FPS_ID,RC_date,RC_Qty,Lot_Num,Dist_date,Qty_sup From receiver_master WHERE Operator_ID IN( SELECT Operator_ID from flour_operator_details WHERE Role_ID =2)";
        stmt = con.createStatement();
        rs =stmt.executeQuery(q);
        System.out.println(q);
        while(rs.next())
        int fpsid = rs.getInt("FPS_id");
        java.util.Date rc_date = rs.getDate("RC_date");
        float rc_qty = rs.getFloat("RC_Qty");
        String lot   = rs.getString("Lot_Num");
        java.util.Date dist_date=rs.getDate("Dist_date");
        float qty_sup = rs.getFloat("Qty_sup");
%>
<tr class="style10">
<td ><div align="left"><span class="style10"><a href="editFPS.jsp?CustomerID=<%=fpsid %> "><%=fpsid%></span></a></div></td>
<td><div align="left"><span class="style10"><%=rc_date.toString() %></span></div></td>
<td><div align="left"><span class="style10"><%=rc_qty %></span></div></td>
<td><div align="left"><span class="style10"><%=lot%></span></div></td>
<td><div align="left"><span class="style10"><%=dist_date.toString()%></span></div></td>
<td><div align="left"><span class="style10"><%=qty_sup %></span></div></td>
</tr>
<%
%>
</table>
<p align="center" class="style22"> </p>
<p align="center" class="style22"> </p>
<p align="center" class="style22"> </p>
<p align="center" class="style22"> </p>
<table width="100%" border="0" align="center" cellpadding="2" cellspacing="0">
    <tr>
        <td><div align="center"><span class="style9">All rights reserved@9879152949-Ghanshyam Rathod </span></div></td>
    </tr>
</table>
<p> </p>
</form>
</body>
</html>================================================
to get that Clicked ID i used this code
but got null value
<%@page contentType="text/html"%>
<%@page pageEncoding="UTF-8"%>
<%@ include file="dbServer.jsp"%>
<%@ page errorPage="loginerror.jsp" %>
<%@ page import="java.util.*" %>
<%
        String user = (String)session.getAttribute("username");
        String dist =(String)session.getAttribute("district");
        String talu =(String)session.getAttribute("taluka");
        String vil =(String)session.getAttribute("village");
        String cid   = (String)session.getAttribute("cid");
         if(session.isNew() || user != null)
        {    System.out.println("admin- session is new");    }
        else
                response.sendRedirect("login.jsp");
%>
<%
        System.out.println("CUSTOMER ID SELECTED is :"+ cid);
        out.println("ID :="+cid);
%>

How to delete the films in VLC in my ipad?

I sync some films(.avi) for VLC to my ipad via itune(I bought free VLC in ipad). One problem is too slow to see in ipad, many mosaic occurred. The other problem is how to delete the films in VLC on my ipad.. there is no any button to delete, only add button..

But what if the videos don't appear in the list under the Apps Tab >File Sharing?
They definitely are on the iPad. I can watch them with VLC. But the VLC list is empty when I select it. Most of my File Sharing lists are blank even though I can access the files I placed on there with my iPad. (Worse, Comic Reader has a list of files but none of those files are accessible on the iPad but a completely different set is readable on the iPad!)
Any ideas?

How can I buy films in languages other than German in Germany? Quite disappointed, i would line to watch films in Original language and not dubbed in strange ways...

How can I buy films in languages other than German in Germany? Quite disappointed, i would like
to watch films in Original language and not dubbed in strange ways...

You are at the mercy of the content owners/copyright holders. They decide what the Apple can sell in each iTS.
MJ

How to edit a PDF in Photoshop CS4

Hi there,
I'm having some real trouble trying to figure out how to edit a PDF in photoshop cs4. So i need to edit/change text, move things around, that type of thing.
I work in Windows.
Could someone give me a bit a low down on how this is done?
Much appreciated,
Victoria

You can open them but you will totally rasterize everything.
PDFs are not intended to be edited. They are a final format but as
mentioned you can use Acrobat for some minor text edits or use it to
extract the images to Photoshop for further editing.
Bob

How To Edit A Film - Transitions & Composit

Similar Messages

Maybe you are looking for