TV-In drivers don\'t work (GF4400)

Hi!
My Problem is that if i install the latest 1.08 WDM capture Drivers from Nvidia, no TV-In Device is found by my Windows (Win98SE) (Neiter 'New Hardware found', nor does it appear in the Device Manager), so i cannot use the tv-in. I also tried other drivers from the cd, but they didn't work either.
TV-Out works and everything else (xcept tv-in) too.
Thank you,
Zap
PS: I have a PIV 2,4 533FSB + Gigabyte GA-8IEXP + MSI GF4TI4400 VTD

Capture driver
Try this capture driver. Was recommended to me by crAzy_caMel. Worked for me and for Caligula also.
Conect your TV or VCR to PC. Use a video capture program (Vegas Video 3, VirtualDub, Ulead 6, iuVCR etc) and from video source select Video composite in (in case you use RCA and not SVideo). For audio you can select the line in. Try a 384x288 or 352x288 resolution and 25 or 30 fps. In the preview window you should see the image you're about to capture. Now hit any button for capturing (or select video from the menu - or something like that).
I agree to crAzy_caMel: try VirtualDub, it's reliable and simple to use.
Hope it works

Similar Messages

HP Pavilion dv7-6b76eo GPU drivers don't work on Win8.1 and ones for Win7 are older than my grandma

I got
HP Pavilion dv7-6b76eo
i7-2670QM 2.2 GHz
8GB DDR3 1333Mhz
1TB SATA 5400RPM
AMD Radeon HD 6770M - 2 GB GDDR5 out of ~6GB dedicated
Installed the latest version of Win 8.1 + all it's updates + the update 1. So it's as latest as possible. Even installed those Win Updates that MS threatened they will only offer to a certain point it time in May and not later than that. So it's all updated.
However, the GPU drivers don't work. Tried different forums too and even tried those brightness registry fix files, but still to no avail. Will HP ever provide a meaningful GPU driver both for Win7 and Win8? I am saying Win7 too, cos the one offered currently for my HP Pavilion dv7-6b76eo is ridiculously old ....

HP are quiet .. they know they've been lazy ...

HP CM1312MPF drivers don't work via Windows 7 but works fine via Linux dual booting

HP CM1312MPF drivers don't seem work using Windows 7 (64-bit) . Original HP drivers CD now lost. Current drivers were downloaded from HP's website. (This webpage has a number of drivers and most 64-bit ones have been tried. Prior to my Windows re-install, the machine printed and scanned satifactoralily in Windows 7. One day this O/S refused to boot and had to be fully re-installed. The reinstall has been tried on both a SSD and on a HDD. (I have 3 x HDDs and 1 x SSD in this Desktop system. and I dual boot Windows7 and Linux Mint with data on its own HDD.) No attempt has yet been made to scan after this Windows re-install, as I have a separate photo scanner. I mainly wish on the to print on CM1312MPF, however it did scan perfectly well prior to the reinstall of Windows. THE CM1312MPF PRINTS FINE VIA THE SAME USB OUTPUT LEAD (AND POWERED HUB) AS VIA LINUX MINT 17 (PETRA) when I dual boot and without any PHYSICAL CHANGES between changing O/Ss. It must be a driver problem, surely, mustn't it? I look forward to your help. John_of_Penrith

You can also disable that windows wireless "Critter" from device manager and it shouldn't ever again show-up in your adapter list. Thanks for the lesson. I too have wondered about the windows virtual adapter and what it's for. I never had it show-up in my adapters though in the network and sharing center. That was strange that it happened to you. I also occasionally just go to device manager and reload the adapter that came with laptop-not the windows one. It
seems to keep it running fairly well since there have been no new drivers for it. I think it was an experiment or something called the DW1501 Wireless half-mini n that came with my Dell Inspiron N7010 laptop. I don't particularly like it as compared to the other wireless adapters in my home, this thing is slow on downloads, but I don't want to bother to get a new adapter.
Anyhow thanks for the interesting lesson.
LindaSView

64 bit HP drivers don't work reliably over a network

Running Win 7 64 bit clients, and server 2008. HP's own drivers are very unreliable. Printers work ok for a while, and then for no reason start outputting garbage. Changing print driver to universal sometimes resolves the issue for a time, but garbage ensues again. Newer Laser printers like p3015dn don't run properly on the drivers supplied on disk, and HP website only provides universal, which only allow single page printing. Has anyone got a solution to this, other than binning all our HP printers (around 60) ? Additionally we have several of the same model, some of which run on the correct drivers, and others that will not, under any circumstance.. It's driving me mad!!!
Pat

Running Win 7 64 bit clients, and server 2008. HP's own drivers are very unreliable. Printers work ok for a while, and then for no reason start outputting garbage. Changing print driver to universal sometimes resolves the issue for a time, but garbage ensues again. Newer Laser printers like p3015dn don't run properly on the drivers supplied on disk, and HP website only provides universal, which only allow single page printing. Has anyone got a solution to this, other than binning all our HP printers (around 60) ? Additionally we have several of the same model, some of which run on the correct drivers, and others that will not, under any circumstance.. It's driving me mad!!!
Pat

Equium M40X: WLan card drivers don't work

Hello,
I just installed fresh WXP and I can't find wireless drivers in internet. I found 3 or 4 drivers but the device is still not working.
Any idea where to look or what to do?
Cheers,
Bilas

What do you mean with still not working?
Can you see the WLan card if you enter the device manager?
Are there any yellow exclamation marks near to the WLan card?
Usually on the Toshiba driver page you should find all necessary drivers also the WLan card drivers. I cant believe that this driver doesnt work.

Q190 Windows 7 drivers don't work

Just received a pair of Q190s in the post and I immediately imaged them with our office's standard Win7 64 bit image. None of the Windows 7 drivers work. Not one. I ended up going to Realtek's site to get the NIC's driver. Any help would be appreciated.

Hi Gilgamesh1082, welcome to the forum,
exactly what do you mean by "None of the Windows 7 drivers work"; you were able to find and download them but there were problems installing them?
Some drivers require a two stage installation, firstly the driver wil be extracted to a location and then needs to be installed from there. If this were the case with the LAN driver it would have extracted to c:\drivers\Realtek LAN Driver
Did you download them from the Q190 Driver Matrix?
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

V570 video drivers don't work with Windows 7 Home Premium 64

Yesterday I bought a V570 notebook, with an addition Windows 7 Home Premium 64 BIT OEM, since the operating system on it was Free Dos.
I've installed Windows and started to install the drivers from the disk that came with notebook. After I've installed the Intel VGA driver, on boot I got a bluescreen, then the notebook just started to restart. I couldn't get a restore so I had to reinstall windows again. After that I've tryed to use the drivers from the lenovo page, from windows update, all the same result.
So I've downloaded an illegal copy of windows 7 ultimate, just to test it out, and guess what, IT WORKES PERFECTLY FINE! Now I can't and won't use that windows, this is why I paid for an original one, so please someone tell me what can I do to make it work! I was up until 4:15 AM and coulnd't find an answer. There is a national holliday today in Romania, so the guys from the call center are not working today.
Solved!
Go to Solution.

I finnaly resolved it. If anyone else has this issue, here is what you do:
1. install all drivers from the CD, except the ones related to the graphics card
2. install all Windows Updates, except the ones related to the graphics card. You will have to reboot a couple of times, and keep installing until the only updates that remain are related to the graphics card.
3. install the video drivers from the CD
4. ENJOY

Drivers don't work for me.

I just installed Vista this morning, and the first thing I did was download the drivers for my Sound Blaster X-Fi XtremeMusic. At first, I wasn't even able to get Windows to recognize the sound card as a Creative SB X-Fi card, but that has since been resolved. Now, I have the drivers installed, and Windows recognizes the card, but I am unable to get any sound out of it. I have already checked all of my connections, and they all work. If I boot into WinXP on my other hard dri've, my sound works just fine. The biggest thing is in the device properties where you can test the "Supported Formats". I tested each Encoding Format, and each Sample Rate, and all of them returned the error message, "Windows was unable to play the test tone."
Please please PLEASE let me know if you had this problem before and how to resolve it...
Thanks!

I use an audio-jack mic, not USB... and I do believe the card is set to defualt, judging by the fact that it's the only audio device installed... but I'm booted into my XP Hard Dri've right now, and I'm too lazy to go check, lol...
Also... I did notice that my Sound Card is not listed in the "Recording Devices" / "Input Devices" / something along those lines.... and I can't figure out how to put it there...Message Edited by ThePope on 04-05-200702:57 PM

Creative ASIO drivers don't work properly with Cubase LE or WaveLab6

It seems that there is some problematic "interaction" between the Creative X-Fi Elite Pro sound card with the ASIO-driver based Audio Creation Mode console (ACMC) and "connected" ASIO applications like WaveLab 6 or Cubase LE.
I was using the SPDIF output from a DVD player. I created a audio PCM wav file at 24 bit/96 kHz with every sample in both left and right channels being identical with alternate bits set in each sample like so:
101010101010101010101010
When I record this SPDIF input stream with X-Fi Elite pro SPDIF-in using the RECORD section of ACMC with Bit-Accurate record mode set, the resultant recorded file is bit for bit identical to the source as expected. Great!
However when I record using Cubase LE and a project with 96 kHz sampling rate in a stereo channel with only the ASIO SPDIF L and R channels enabled, (keeping the ACMC with identical settings in the backgroun) the resultant wave file has lots of "noise" in the lowest 8 bits or so, almost like it was dithered. The same thing happens when I record using WaveLab 6.
So this seems to mean that somehow Creative's use of the ASIO driver in ACMC is not "sharing" the ASIO input bus signal properly with ASIO apps like CubaseLE and WaveLab6. For sure, the 24 bit audio recorded by Cubase or WaveLab6 is not "bit accurate" to the SPDIF input signal. I wonder what this means for the accuracy of details in recordings made with Cubase LE or WaveLab via Creative's ASIO driver??

GI've had enough of this creative broken windows 7 drivers issue...
selling my xtremegamer and buying an asus xonar dx card, hopefully that works fine. asus seems to at least update their drivers on a regular basis. I mean, the latest win 7 creative drivers are from '09...

Track ball drivers don't work with Lion

My Kensington Turbo Mouse won't work properly with Lion.
The Kensington web site no longer recognises the product, and it is only 3 years old!

Try third-party drivers as well
www.boastr.de/
www.plentycom.jp/en/steermouse
www.usboverdrive.com

New hp drivers don't work with 10.8.2 a fix??

Downloaded new hp driver supposed to work with 10.8.2, but doesn't
Any suggestions?

Would you tell us which exact model of HP Printer you have, and which version number of driver you downloaded?
Hope this helps

P4m266 (MSI 6786 V2) On-Board VGA drivers don't work with SP2

I have a Pinnacle Micro system in the workshop which required a re-installation of the OS. The client no longer has the original installation CDs from Pinnacle and the local Pinnacle branch have declined to make a copy available to me. The mobo is an MSI 6787 Ver.2 with a Phoenix BIOS.
I installed Windows XP Home (no SP) and had no problems. I then used the CD supplied by Microsoft to install SP2. On rebooting the display was horrific. The OS automatically detected the VGA card as an S3 Graphics ProSavageDDR and installed the drivers. However it is virtually impossible to see anything on the screen, the colours are distorted and very faded. I tried to download updated drivers using the LiveUpdate feature but the first problem arose when it wanted to update the Phoenix BIOS with an AWARD BIOS...I quit in a hurry.
I have tried several drivers for this card. I browsed through the P4M266 boards until I found one which looked identical to the board I have in the workshop. However, it doesn't matter which version of driver I use none of them will give me a reasonable display.
Please can somebody tell me where I can find the correct drivers?
TIA
Tracey
PCTECH JBay
South Africa

Do you have the "P4MAM-V"
http://www.msicomputer.com/product/p_spec.asp?model=P4MAM-V&class=mb
or The "P4MAM-L"
http://www.msicomputer.com/product/p_spec.asp?model=P4MAM-L&class=mb
or maybe "MBOX P4MAM-V"
http://www.msicomputer.com/product/p_spec.asp?model=MBOX_P4MAM-V&class=npc
Or just check here for Drivers.
http://www.msi.com.tw/program/search/ser/SerConDownRes.php?pro=1&chp=119

T61 8891-CTO split screen display on startup - nVidia drivers don't work

Greetings,
I have a T61 model 8891-CTO laptop. The laptop has the following nVidia part - 42X0809SBB NVID Q NVS 140M W/O-WWAN. Whenever I start my laptop I get a split screen display. I tried restoring an old system image and even tried re-installing Windows 7 several times and I still have the same problem. When ever I tried to install the nVidia driver, the OS goes into recovery mode upon startup. The warranty on the machine is expired. I read a few threads in the forum regarding T61 display problems, but was not able to find a solution to my problem. Does anybody have any suggestions or advice for this problem.
Thanks in advance for any help!

bhaga,
Well, that would tend to unfortunately confirm that you have a problem with the video subsystem - mostly likely the GPU as lead_org suggests above.
If your system is still under warranty, or six months or less outside of warranty, please contact support and they should be able to service the system and replace the system board.
If you are otherwise out of warranty, you may want to check the support site to find the FRU number for your system board and do a bit of searching online for the best price on a replacement board and swap it out. It's not too hard - will take you about 45-50 mins start to finish.
You will want to pick up some artic silver and clean off all the old thermal paste and use the artic silver on the CPU and GPU when you install the fan / heatsink.
Wish I had some better news for you!
Best regards,
Mark
ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
Mark Hopkins
Program Manager, Lenovo Social Media (Services)
twitter @lenovoforums
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Boot Camp drivers don't always load (for Windows 7)?

Recently, I backed up my Windows 7 Boot Camp partition with Carbon Copy Cleaner before realizing that it would not be a bootable backup. Well, after some fiddling around, I made it bootable again (with the help of iPartition) and it generally works well.
However, for some reason, sometimes when I boot into Windows 7, it appears that some drivers don't work properly about half the time. For instance, if I load a game, the game will not be full screen and will instead be the exact dimensions that is specified (my display is 1920 x 1080; if the game is set to 1280 x 720, then it won't stretch to full screen but instead appear at that size). As I said, this happens about half the time.
Also, I use MacDrive so I can write to Mac partitions, and when these display problems occur, then MacDrive will also show an error saying that it needs to be repaired.
All of this can be fixed with a restart, but after restarting, my two displays will be duplicated instead of extended.
It appears that the display drivers (and perhaps a few things, related to MacDrive) don't seem to be loading properly at all times? For some reason, I can seem to fix this if, when in Mac, I quit all applications first before booting up Boot Camp. I don't know how they could be related, but it so far seems that way.

Have a read here Installing Windows 7 drivers on MacBook Air (Late 2010)
Stefan

Drivers don't load on every boot into Windows.

I have Windows 7 installed on my Mac Pro via Boot Camp, and for the most part everything works wonderfully.
However, 50% of the time when I boot into Windows, the Apple drivers don't work, rending my keyboard volume, brightness, eject buttons, etc. all useless.
The other 50% of the time they boot up and everything works perfectly.
Both scenarios happen from both cold boots and restarts, and I can't figure out what would cause the drivers to fail to load, any ideas?
Thanks for any help!

Nevermind, it seems I had forgotten to install the application for that purpose (Volume Control Panel) upon the installation of the driver with the CD...

TV-In drivers don\'t work (GF4400)

Similar Messages

Maybe you are looking for