How to edit/change data type on report that was selected by mistake

Hello there
I created a report in APEX and one column is giving error because the data type of one column supposed to be a varchar2 but somehow the report was created with a Date data type. I want to change the data type without recreating the whote report. Can someone help? I tried to edit the report but couldn't be able to figure out.
HELP....

I found a solution for this, thank you.

Similar Messages

How to dynamically change data type

Hi
Let say I have 1 byte in the folowwing hex format (1F )
Then if I say convert it to 24 bit then the number should become 1F 00 00 and if I say convert it 32 bit the number should become 1F000000
Could you please help me to implement this in LabVIEW ?
Thanks

Ah right, now I see why you mentioned dynamically changing the data type - LabVIEW is a strictly typed language which means you must end up with one of the numeric formats in LabVIEW (with 64-bits being the largest). If you're going to have more than 8 bytes, I'm not sure what the solution would be, if you're going to have 8 bytes or less then I would just assume the worst case and convert/fit the numbers into a U64.
Here's an example:
I am starting off with an empty U64, taking each input byte and shifting the U64 left by one byte and then adding the input byte.
I guess that leads to my next question - what are you going to do with the numbers? Would having an array of U8's or converting the bytes to a character string not be better? If you have a string or array these can have a dynamic length so you can more easily manipulate the data (e.g. by performing string/array indexing functions).
Certified LabVIEW Architect, Certified TestStand Developer
NI Days (and A&DF): 2010, 2011, 2013, 2014
NI Week: 2012, 2014
Knowledgeable in all things Giant Tetris and WebSockets

How do I change the original email address that was used to set up iCloud

I have just noticed that the email under system preferences for iCloud is an old one that does not exist anymore. How do I change this? Can you also tell me if I delete this account - will it affect what I have stored on the computer e.g. what is in my photos etc? I am a real novice when it comes to computers - so excuse my ignorance :-)
Thanks for any assistance.

You can change the (non-Apple) email address which forms your Apple ID to another one at http://appleid.apple.com. If you are going to do this you should follow this procedure to avoid problems:
Firstly, if you have 'Find My iPhone/iPad/iMac' enabled on any of your devices, turn it off.
Create a new email address, for example at Yahoo or Gmail, or anywhere convenient (or you can use an existing address as long as it has never been associated with an Apple ID).
Go to http://appleid.apple.com and click 'Manage your Apple ID'. Sign in with the current ID.
Where it says 'Apple ID and primary email address' and gives your current ID email address, click 'edit'.
Enter your new address and click 'Save changes'.
Now you will need to go to each of your devices and sign out in System Preferences (or Settings)>iCloud - 'Sign out' on a Mac, 'Delete this account' on an iOS device (this will not delete the account from the server).
Then sign back in with your new ID. Your iCloud data will disappear from your devices when you sign out, but reappear when you sign back in (give it time).
I re-iterate: before you start, turn off 'Find My Mac' (or whatever) or you will need the services of Support.

How do I change andmisistrator on my mac that was previously password protected but no longer have password

Can someone please assisst we are leasing a mac desktop whoever had it previously set themselves as administrator and then when they returned it they didn't take themselves off so now then company we leased it from has no idea what the password is and we can't wipe it clean and start fresh as administrators or add accounts because we are not the administrators.

Boot into Recovery mode, launch Disk Utility, and erase the startup volume. This operation will destroy all data on the volume. Quit Disk Utility and install OS X. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.

How to recover lost data from a mac that was erased and locked using findmyiphone app

Hi,
My macbook pro was locked and erased using find my iphone app then it was recovered. I entered my pin and unlocked it. I then have the option to reinstall the OS on a new hard drive or my old one (which is blocked).
What do I do if i want to recover all of my old data?

Alas the answer is : NO
If you have an external HD, you may try tun run a recovery tool instlled on this external device searching for keystring "index.xml"
With a bit of luck, it will retrieve an old copy of your document.
I hope that this time you will understand that working the way you did is playing with matches.
Whe you work on a document already saved once, duplicate the document before opening it and check that both copies are OK.
This way you will have at least a copy containg the datas from the 25 first day.
During the working session, don't save with the name of the opened doc, save vert ten minutes with different names.
Doing that you will recover at least the copy which you opened.
Yvan KOENIG (VALLAURIS, France) jeudi 10 janvier 2011 21:27:19
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community

HT201318 How do I cancel my iCloud storage upgrade that was made by mistake?

I somehow upgraded my iCloud storage to the 50GB tier. It was a mistake and I want to revert back to my former plan. It states I have 15 days for a full refund but I cannot find where I would make that request.

Try doing this: https://discussions.apple.com/message/16968425#16968425.

How to change data type of attribute in caf

hi.
this is my problem.
i been added a attribute in an entity service called emloyee. named "Birthday", use the data type "com.sap.caf.core.date".
when i tried modify the entity service, i hit exception about "DST Daylight Saving Time".
because of DST, the date will add an hour such like "1957/04/01 00:00:00.0" to "1957/04/01 01:00:00.0", and com.sap.caf.core.date will throw an exception.
is anyone had same problem like me?
how to fixed it(if passable)?
and, how to change data type?
thanks.

Hi Sruthi,
all you need to do on this is open the report go to the parameters, select the parameter that you wish to change and click "Edit". This will allow you to change thefield to a date rather than a date time.
Regards,
Noel

Step- by- Step on How to Load Excel data into Crystal Reports?

Hi Friends,
Can anyone send me a Step- by- Step on How to Load Excel data into Crystal Reports? Pls help me. Thanks in Advance.
Vijay

It's also important to 'prep' the excel file prior to connecting to it.
Give the data tab a meaningful name
Make sure the column headers are unique and that every column has a header
Delete any blank tabs
If you have trouble with Excel changing the data type of a field (say, a social security number you want to be a string value rather than a number so you don't lose leading zero) an alternative would be to save the spreadsheet file as a CSV, create a schema.ini to specify the data types for each column (example below) and use the same steps to connect except instead of choosing Excel 8.0, scroll to the bottom and choose Text. You have to make sure the CSV file is in the same folder as the schema.ini file that defines the columns.
Schema.ini example:
200912PUSD.csv
ColNameHeader=True
Format=CSVDelimited
MaxScanRows=25
CharacterSet=OEM
Col1=SSN Char Width 9
Col2=LAST_NM Char Width 25
Col3=FIRST_NM Char Width 25
Col4=DOB Date
Col5=STDNT_ID Char Width 10
Col6=SORTKEY Char Width 10
Col7=SCHOOL_NM Char Width 30
Col8=OTHER_ID Integer
Col9=GRADE Char Width 2
The filename in the first line needs to have the [] brackets around it, but I couldn't get it to display in this forum correctly.
Edited by: Eric Petersen on Jan 27, 2010 9:40 AM

How to use same Data Type and Length for two fields

How to use same data type and length for two fields when using 'FOR ALL ENTRIES IN' in a select statement? For instance the select queries are :
SELECT bukrs gjahr belnr lifnr budat bldat zlspr dmbtr waers shkzg
FROM bsik
INTO TABLE it_bsik
WHERE bukrs = p_bukrs
AND lifnr IN s_lifnr.
IF it_bsik IS NOT INITIAL.
SELECT belnr gjahr awkey awtyp
FROM bkpf
INTO TABLE it_bkpf
FOR ALL ENTRIES IN it_bsik
WHERE belnr = it_bsik-belnr
AND gjahr = it_bsik-gjahr.
IF it_bkpf IS NOT INITIAL.
SELECT belnr gjahr lifnr xblnr
FROM rbkp
INTO TABLE it_rbkp
FOR ALL ENTRIES IN it_bkpf
WHERE belnr = it_bkpf-awkey+0(10)
AND gjahr = it_bkpf-awkey+10(4).
ENDIF.
ENDIF.
Here it gives an error in the 3rd select query that 'When you use the addition "FOR ALL ENTRIES IN itab", the fields "GJAHR" and "IT_BKPF2-AWKEY+10(4)" must have the same type and the same length.'
Kindly clarify.

Hi Saurabh,
Please see the example code that I have developed for you. It will help you solve the problem.
REPORT ZTEST_3 .
tables : BKPF.
data : begin of it_bkpf occurs 1,
         belnr type RE_BELNR,
         awkey type awkey,
         awtyp type awtyp,
         gjahr type GJAHR,
       end of it_bkpf.
data : begin of it_bkpf1 occurs 1,
         belnr type RE_BELNR,
         awkey type gjahr,              " change the data type
         awtyp type awtyp,
         gjahr type GJAHR,
       end of it_bkpf1.
data : begin of it_rbkp occurs 1,
         belnr type BELNR_D,
         gjahr type gjahr,
         lifnr type LIFRE,
         xblnr type XBLNR,
       end of it_rbkp.
select belnr
       awkey
       awtyp
       gjahr
       from bkpf
       into table it_bkpf
       where BUKRS = 'TELH'.
loop at it_bkpf.
it_bkpf1-belnr = it_bkpf-belnr.
it_bkpf1-awkey = it_bkpf-awkey+10(4).           "Here only append the required length.
it_bkpf1-awtyp = it_bkpf-awtyp.
it_bkpf1-gjahr = it_bkpf-gjahr.
append it_bkpf1.
clear it_bkpf1.
endloop.
select belnr
        gjahr
        lifnr
        xblnr
        from RBKP
        into table it_rbkp
        for all entries in it_bkpf1
        where belnr = it_bkpf1-belnr
This is just an example. Change the fields according to your requirement.
Regards
Abhii
Edited by: Abhii on Mar 9, 2011 9:08 AM

How to get changed data in ALV in Web Dynpro for ABAP

METHOD on_data_check .
DATA:
    node_spfli                          TYPE REF TO if_wd_context_node,
    node_sflight                        TYPE REF TO if_wd_context_node,
    itab_sflight2                        TYPE if_display_view=>elements_sflight.
node_spfli = wd_context->get_child_node( name = if_display_view=>wdctx_spfli ).
node_sflight = node_spfli->get_child_node( name = if_display_view=>wdctx_sflight ).
CALL METHOD node_sflight->get_static_attributes_table
    IMPORTING
      table = itab_sflight2.
this code is ..get all data(changed and not changed)
but i want get changed data only, not all data.
how to get changed data?
Edited by: Ki-Joon Seo on Dec 27, 2007 6:04 AM

Hi,
To get only the changed data in the ALV grid of a WD, you need to capture the "ON_DATA_CHECK" of the ALV grid.
To this please do the following in the ALV initialization of the ALV table settings :
    lr_table_settings->set_data_check(
            IF_SALV_WD_C_TABLE_SETTINGS=>DATA_CHECK_ON_CELL_EVENT ).
You may also do this:
    lr_table_settings->set_data_check(            IF_SALV_WD_C_TABLE_SETTINGS=>DATA_CHECK_ON_CHECK_EVENT)
The above two ways would depend on when do you need to check for the changed data. If you want to check the data as soon as it is entered, then use the first method. Else, use the second method.
You need to register an EVENT HANDLER for this event.(You may do this in your VIEW or Component Controller).
In this Event handler, you would find an importing parameter R_PARAM which is a ref type of      IF_SALV_WD_TABLE_DATA_CHECK.
The attribute T_MODIFIED_CELLS of this interface IF_SALV_WD_TABLE_DATA_CHECK will contain the modified cells of the ALV with the old & new values.

How to save the data of ABAP report into a notepad in desktop location???

HI all,
Can any one tell me how to transfer the data of ABAP report into a Notepad.
Actually I have to schedule a ABAP report in background on daily basis and I want to transfer the
whole record into Notepad.
If any program is available for this..please clearify the relevent code for transferring.
Thanks
Rajeev

declare a character type internal table.
now move your data from it_data ( internal table with data ) into table itab.
since you are running this report in background, you cannot save it to the desktop. Instead give any app server location
data: itab(400) occurs 0 with header line.
field-symbols: <fs1> type any.
data: gv_file type rlgrap-filename default 'TEST.TXT'.
data: gv_filepath type rlgrap-filename default <path>.
LOOP AT it_data.
    DO 100 TIMES.
      ASSIGN COMPONENT sy-index OF STRUCTURE it_data TO <fs1>.
      IF sy-subrc = 0.
        CONCATENATE itab <fs1> INTO itab SEPARATED BY ' '.
      ELSE.
        EXIT.
      ENDIF.
    ENDDO.
    SHIFT itab LEFT DELETING LEADING ' '.
    APPEND itab.
    CLEAR itab.
ENDLOOP.
concatenate gv_filepath '/' gv_file into gv_file.
OPEN DATASET gv_file FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc = 0.
    LOOP AT itab.
      TRANSFER itab TO gv_file.
    ENDLOOP.
    CLOSE DATASET gv_file.
ENDIF.

How to find the Data Type of a column

Dear All,
How to find the Data Type of a Column dynamically in oracle Form.
Thanks and Regards,
Fazil
Edited by: user11334489 on Aug 25, 2012 9:06 PM

hi,
you can use get_item_property built-in
eg:
declare
l_item VARCHAR2(10);
begin
l_item := Get_Item_Property('item_name',DATATYPE);
end;

How We Can Change Page Size During Report Run Time

Hello !
How We Can Change Page Size During Report Run Time .
How can we stop to change the column name when we amend a sql in report data model.
Thanks !
null

hello sohail
1. question - i'm afraid this cannot be done ... bit in report 6 and newer you have posibility to divide your report in 3 parts (former header, body, trailor) and each part can have diferent page siz, orientation , ...
2. question - best is give each column in your statements in one report diferent alias. when you have to chnge something, alias will remain same ...
try this: select 1 as fist_column, 1 as second_column from dual
hope this helsp

How to add TIMESTAMP data type in Enterprise Architect...?

Hi all
There is no data type of timestamp in Enterprise Architech. There is only
DATE type. I have ERD prepared from Enterprise Architech. How to modify
DATE type to TIMESTAMP type.
How to add TIMESTAMP data type in Enterprise Architect or in ERD ?
Thanks in advance,
Pal

Have you asked this question of the vendor of Enterprise Architect? They may have a later version that supports the various TIMESTAMP data types. If your ERD tool doesn't support a data type, other than talking to the vendor or working around the problem (i.e. generate DDL to a text file and edit it before applying it to the database), you're probably out of luck.
Justin

How to edit Idoc data in inbound processing

Moved to correct forum by moderator
Hi All,
How to edit idoc data in inbound processing ? We have a custom FM in inbound scenario and requirement is to update a value in idoc, this value comes after certain processing in custom FM.
I tried editing it through
EDI_DOCUMENT_OPEN_FOR_EDIT
EDI_CHANGE_DATA_SEGMENTS
EDI_DOCUMENT_CLOSE_EDIT
but there is problem in this approach. By this procedure two idocs are created in system, one with original data and one with modified data. We want only one with modified data.
We do not want any direct database table updates.
Please provide appropriate solution.
Note : We are not changing status record. Please do not post replies related to status change
Edited by: Matt on Nov 19, 2008 2:24 PM

Hi,
You can edit the idoc by doing the following steps:-
1. Goto WE02 transaction and give the IDOC number and execute
2. Once the required IDOC gets retrieved then double on the text pad icon beside the segment which you wanted to change.
3. Select the Data Record at the top and click Display <-> Change option, which will enable you to change the data in that segment.
4. After doing the step 3 then click the save button to save your changes.
5. Then system will generate a new idoc number to store the actual data and your current idoc will hold the new data and the idoc will be in 69 status.
6. Execute the Program RC1_IDOC_SET_STATUS by giving your idoc number and status as 69 and new status 64 and remove the test flag
7. Then the IDOC will be in 64 status and you can reprocess the idoc with the help of the program RBDAPP01 by giving the idoc number.
The above is the entire process for editing the error idoc and reprocessing it again.
I hope I am clear and you understood the entire flow of editing and reprocessing an idoc.
Thanks,
Mahesh.

How to edit/change data type on report that was selected by mistake

Similar Messages

Maybe you are looking for