How to eliminate an instance of "entering a sequence call" from the teststand report

I am using TestStand 4.2 and I am using a long sequence with several sub-sequences. In these subsequences I am getting test results that I would like to place in the TestStand report. Currently, in order to do this I have to check the "Record Result" option in the "Run Options" of the sequence call properties which displays an "Entering sequence call" mark on the report. Is there any way that I can get rid of this marker and still record information from the sub sequence?
Solved!
Go to Solution.

Hello,
You should have a look a these documents:
http://digital.ni.com/manuals.nsf/websearch/2B14FB1CD4FF25CA862577AE00554FC7
http://zone.ni.com/devzone/cda/tut/p/id/7958
Regards,
Rodéric L
Certified LabVIEW Architect

Similar Messages

How to get the Runstate variable of an external sequence called from the Client Sequence through Sequencecall?

Hi,
I need to change the runtime high and lo limit values of all the tests of the client sequence file before running it. My sequence file is having a SequenceCall which calls an external sequence. Can anyone tell me how to change/access the High and lo limit values of the external sequence test steps?
Thanks,
Jeyan

Doug,
I used the property loader method but I could not load the limits of any sub sequence call calling an external sequence file.
I took the FlowRate_test.seq example from the NI Example folder "C:\Documents and Settings\All Users\Documents\National Instruments\TestStand 4.2.1\Examples\PropertyLoader\LoadingLimits\LimitsFromExcelFile\UsingCVI". I created a sequence called PumpTest.seq in the same folder path. I then moved the Pump Test step from the FlowRate_test.seq to the PumpTest.seq. Now created a sequence call in the FlowRate_test.seq and called the PumpTest.Seq as the module path. When I execute the FlowRate_test.seq , I get the error as shown below:
Attached is the Flowrate_Test.seq and the PumpTest.seq which should be there in the folder path "C:\Documents and Settings\All Users\Documents\National Instruments\TestStand 4.2.1\Examples\PropertyLoader\LoadingLimits\LimitsFromExcelFile\UsingCVI".
Let me know whether I am doing something wrong in this method.
My idea is to alter the runstate variable High and Low of Pump Test in the PumpTest.seq and then run the Flowrate_Test.seq.
Attachments:
PumpTest.seq ‏6 KB
FlowRate_test.seq ‏11 KB

How to secure a PL/SQL procedure that is called from the web browser

If you have ever seen the sample document management application, and tried to download a file that was stored in the system, you are probably familiar with the apex_util.count_click URL that is used to download the file. If you copy that URL and paste it into a new browser, you will not be prompted to login to download the requested file. I'm using SSO with Apex as a partner application. How can I secure a pl/sql procedure like this to redirect to the login page before beginning the download?
Thanks,
Kris

You can use the second method described here:
http://apex.oracle.com/pls/otn/f?p=31517:15
You would use an application process instead of pasting the procedure call in the browser. In the case I describe, you don't need to grant execute to public on the download procedure.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

How to stop iphone 4s from putting a space after the second digit, when entering a text number from the keypad

How do I stop the iphone 4s from putting a space after the second digit, when entering a text number from the keypad. Entering a text number on the key pad like 61998 comes out on the screen as 61 998 and the sms fails to go.

The space (or lack thereof) should have no effect on whether or not the SMS goes through. The spacing is intended to make it easier for the human eye to comprehend the number. I'd start by resetting the network settings in General>Reset>Reset Network Settings.

How do I stop my MacBook removing all my icons from the desktop ?

How do I stop my MacBook removing all my icons from the desktop ?

Hi Matt
After I create say a word document, file it on my desktop and then shut down my machine. The next time I open up the MacBook the file icon has been removed from the desktop. I can still retrieve the file in a folder labeled with the month I created it. But why has the OS removed it from the desktop and how can I stop it happening?
It happens to alias icons as well!
Regards

How do I scan multiple documents to a single pdf from the ADF on my MX922?

How do I scan multiple documents to a single pdf from the ADF on my MX922?
Solved!
Go to Solution.

Hi Riceburner1,
Since you have had difficulty scanning using My Image Garden, you can scan using the IJ Scan Utility program that also comes with the printer. To do this, please follow these steps:
1. Place the documents in the ADF or on the platen glass of the printer.
2. Start the IJ Scan Utility.
For Windows 8.1:
1. On your keyboard, press the Windows key.
2. Start typing IJ SCAN UTILITY. The search window opens as you type. Once the IJ SCAN UTILITY is displayed, please select and open it, then continue with Step 3 below.
For Windows XP:
1. Go to your START MENU, then select ALL PROGRAMS, then CANON UTILITIES, then the IJ SCAN UTILITY program.
2. In the Canon IJ Scan Utility window that opens, click SETTINGS.... in the bottom right of the window. The Settings dialog box appears. Please continue with Step 3 below.
3. In the Canon IJ Scan Utility window that opens, click SETTINGS.... in the bottom right of the window. The Settings dialog box appears.
4. Click the DOCUMENT SCAN option on the left pane of the window. In the Select Source field of the Scan Options section, select DOCUMENT (ADF/PLATEN) to scan items placed directly on the platen glass, DOCUMENT (ADF SIMPLEX) to perform single-sided scanning from the ADF, or DOCUMENT (ADF DUPLEX) to perform double-sided scanning using the ADF. You can then set the item size, resolution, etc. in the Scan Options section as desired.
5. In the SAVE SETTINGS section of the window, you will select the save format and location of the document you are about to scan.
a.) In the FILE NAME field, specify the name you would like to give the file. By default the filename will begin with IMG; you can remove IMG and change it to whatever you would like to name the file. Please note that the filename that you give the document here will be the default filename for all items scanned until you change the file name. If you leave the file name the same in the field, the scanned item will have a sequential number appended to the end of whatever name you give it.
b.) In the DATA FORMAT field, use the drop-down arrow to select the desired option. If you are scanning a multipage document, select the PDF (Multiple Pages) option.
c.) In the SAVE IN field, please navigate to the area where you would like the file to be saved once it is scanned in. By default, the file will be saved in the MY DOCUMENTS folder.
6. In the APPLICATION SETTINGS section of the window, please select the DO NOT START ANY APPLICATION option.
7. Once all settings have been selected, click the OK button at the bottom of the SETTINGS (DOCUMENT SCAN) window. The IJ Scan Utility main screen appears.
8. Click the DOCUMENT button. Scanning starts. Click the CANCEL button to cancel scanning if needed. Once the scan is completed, scanned images are saved in the previously selected folder location specified in the SETTINGS... window.
Hope this helps!
This didn't answer your question or issue? Please call or email us using one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

How do I add multiple songs to an existing playlist from the (no longer called) Library? Highlighting multiple songs and clicking the "Add to" button will only add the with the little arrow, not all the highlighted ones!

How do I add multiple songs to an existing playlist from the (no longer called) Library? Highlighting multiple songs and clicking the "Add to" button will only add the one with the little arrow, not all the highlighted ones! I am using the "new" iTunes.

For the moment there isn't a way for us end-users to control what is "matched" or "uploaded." That is purely a result of Apple's server-side algorithms.
To re-add multiple songs at once simply highlight all the songs you want to re-add, then right-click (or Control+click) the list and choose "add to iCloud."

How do I create a new account and get stuff from the old account to the new account

How do I create a new account and get stuff from the old account to the new account

There are instructions on this page for creating a new account : Set up an Apple ID in iTunes
Or if you don't want to give credit card details : Create an iTunes Store, App Store, or iBooks Store account without a credit card or other payment method
But you won't be able to transfer purchases from your old account to it, all content that you download from the store will remain tied to the account that downloaded it.

I have an iPod, iPhone and iPad all set up to a Dell laptop. I recently got a Macbook Pro, how do I transfer all my control for my devices from the Dell to the MacBook?

I have an iPod, iPhone and iPad all set up to a Dell laptop. I recently got a Macbook Pro, how do I transfer all my control for my devices from the Dell to the MacBook? Can anyone help?

http://www.apple.com/support/switch101/
http://www.macworld.com/article/1153952/superguide_switchingtoamac.html

How to I add Camera Raw presets I've downloaded from the internet?

How to I add Camera Raw presets I've downloaded from the internet? I have a mac and I use Creative Cloud.

Presets are stored under Library>Application Support>Adobe>Camera Raw>Settings. Install them there. Once done, load the settings:
Benjamin

I have lost my "Basic" panel in the Develop module and can't figure out how to get it back. My right panel goes from the Histogram straight to the Tone Curve panel. My Basic panel should be below the Histogram. Any ideas how to get it back. I have even

I have lost my "Basic" panel in the Develop module and can't figure out how to get it back. My right panel goes from the Histogram straight to the Tone Curve panel. My Basic panel should be below the Histogram. Any ideas how to get it back. I have even uninstalled my lightroom and reinstalled it with same issue. Help!!!

Right click on or near one of the other headers and a pop-up will appear and you will be able to select the Basic Panel for viewing.

Can any one tell me how to include the company logo and some poictures into the Teststand report

1. Can any one tell me how to include the company logo and some pictures into the Teststand report?
2. How to include the waveforms into the report?

http://zone.ni.com/devzone/cda/epd/p/id/3619
jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~

How can you tell what type of Iphone I have from the model number or serial number from the settings menu

how can you tell what type of Iphone I have from the model number or serial number from the settings menu?

Type Serial Number from Settings App here https://selfsolve.apple.com/agreementWarrantyDynamic.do it will tell you the type of iPhone.

HT4864 how do I turn off auto reply "I'm away from the office........."

How do I turn off Auto reply "I'm away from the office.................. '

Go to the mail page at http://icloud.com , click the cogwheel icon at top right, choose 'Preferences' and uncheck 'Forwarding'.

I did this -- Windows 7 and Vista 1. Select the Start Menu in the Windows Taskbar. 2. In the Search box, enter the following: %APPDATA% 3. Press Enter. 4. From the Application Data folder, navigate to Local\VirtualStore\Program Files\Mozilla Firefox. 5. D

When I sign out of FF and want to go back in, I have to go through Task Mgr each time by deleting FF and then signing back in. I followed these directions -- Select the Start Menu in the Windows Taskbar. 2. In the Search box, enter the following: %APPDATA% 3. Press Enter. 4. From the Application Data folder, navigate to Local\VirtualStore\Program Files\Mozilla Firefox. 5. Delete the file xpicleanup.dat. 6. Restart Firefox. --- but I could not find Mozilla Firefox under 'Program Files'.
== This happened ==
Every time Firefox opened
== about a week ago

Where did you find those instructions to delete the '''xpicleanup.dat''' file?

How to eliminate an instance of "entering a sequence call" from the teststand report

Similar Messages

Maybe you are looking for