How To: Elliminate prompt to run executable on strage device for WRT610n

This is probably a stupid question, but how do I get ride of the prompt to run an executable file from the attached storage device on the WRT610n? This is not a prompt to login with a different user/passwd but rather a warning that pops up from my Windows XP box. I loaded my iTunes on the drive I attached to the router and I get this stupid prompt every time.

What type of Prompt do you get ?
What warning do you get on your XP computer ?

Similar Messages

How do I know what transactions executed by specific user for last month

All
We have a request to find out what transactions are executed by secific user
for last couple of months.
Is there any report in SAP would tell me ?
Please advise.
From
PT.

Hello PT,
If you use the search for the term "How do I know what transactions executed by specific user for last month" then I guarantee you some good hits in the result, and further more detailed search terms to use...
Cheers,
Julius
(this time in response to the correct thread...)

How to add prompt before running the report in ssrs such that it generates a report bases on the input having different parameters as filters ?

Hi,
I would like to give a prompt in SSSRS report so that report is generated based on the prompt (no default
value is taken)and the generated report should have different parameters as filters (except the initial prompt parameter).
Thanks & Regards,
Ganesh

Thank Santosh for responding.
I was looking for similar thing but I want to navigate to another report when view report is clicked on the report and pass my parameters from initial report.
Can we keep any action on view report button on the report??
Thanks & Regards,
Ganesh

"Xcode cannot run using the selected device" for no apparent reason.

EDIT: It was just because I hadn't told Xcode to use my iPhone for development... I thought I had already done that. I also had to wait a few minutes after enabling it for development for it to actually work.
I'm using Xcode 5 and an iPhone 5 for development. I made an app ID with the ID "com.myname.agreementfinder". Then I made a development provisioning profile linked to that app ID. In my developer provisioning profile dashboard, it clearly says that the app ID is "com.myname.agreementfinder". I downloaded the provisioning profile and put it on my iPhone using the Xcode organizer, no problems. So now I have a profile in my organizer that has the app identifier "U2M9******.com.myname.agreementfinder" (part of it censored). Not sure what that weird number at the beginning is, but my other profiles have one too.
I have a project with the bundle identifier "com.myname.agreementfinder" and deployment target iOS 7.0 on iPhone, so it should work with that, right? Actually, the project was renamed from "FBFun". Well Xcode keeps saying that it can't run it on there because "No provisioned iOS devices are available with a compatible iOS version." I wish it would say which, invalid version or no provisioning profile
How should I fix this? It seems like everything is already fine, yet it won't work. Could it be that renaming the project caused problems?

I did. I did "Product -> Clean", it replied : "Clean vog_x20_new: Succeeded" and then I did "Product -> Build", and it replied "Build vog_x20_new: Succeeded".
Ok, so I may have misunderstood my own problem. It's not a compilation problem. But, I still have the same message when I try to run the program (i.e. "Xcode cannot run using the selected destination").
So it seems that I can build the project but I cannot run it.
Here is a screenshot of the error windows
So what should I do next ?
Thanks for you attention and help.

How can I use my computer as a Headset device for my phone with Bluetooth?

Hello, Both my laptop and my phone support A2DP but for some reason the service (from the phone) does not show up while I add a new connection and the phone does not let me initiate a connection with any other profile except FTP, even though it detects other services in the service list like A2DP and works perfectly fine with other profiles like DUN, HID, OPP, SSP if the connection is started through the computer. I am currently using the latest version of the Toshiba stack [v8.00.12(T)], I have tried using WIDCOMM but it refuses to install drivers for both the internal Bluetooth and the USB Bluetooth that I use on my desktop. The standard Microsoft stack (generic driver) does install but it does not seem to communicate with my internal and external (USB) Bluetooth. With BlueSoleil (the default stack that came with the USB Bluetooth) I could set my device as "headset" instead of only "laptop/desktop", and this allowed both my phones to detect my laptop as a device they can use as a headset, but the problem with this stack was that only the older phone could actually connect to my laptop and that the internal Bluetooth could not be used. Basically, I want to set the device type as a "headset" for my phone using the Toshiba stack like I did with BlueSoleil. Is there any way this could be done? Thanks. Attached: Device type selection
Attachments:
Untitled.jpg ‏120 KB

It's not possible. You can use the iMac as a display for the MBP, but the reverse is not possible. The MBP does not have Target Display Mode as a feature and no third-party app nor hack can enable something that doesn't exist. The only way to accomplish this will be one of the network solutions.
Regards.

Running executable

Hello,
I'm attempting to run executable jar in device emulator, but I'm having some difficulty. I have broken the invocation to run executable into 2 files: MyApp.lnk and args.txt.However, I'm receiving the following error:
java.lang.ClassNotFoundException: Files\Company
at sun.misc.Launcher$AppClassLoader.findContainer(Native Method)
at sun.misc.Launcher$AppClassLoader.access$400(Unknown Source)
at sun.misc.Launcher$4.run(Unknown Source)
at java.security.AccessController.doPrivileged(Unknown Source)
at java.security.AccessController.doPrivileged(Unknown Source)
at sun.misc.Launcher$AppClassLoader.doClassFind(Unknown Source)
at sun.misc.Launcher$AppClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.misc.CVM.runMain(Unknown Source)
Here's what I have in the 2 files:
MyApp.lnk:
255#"\Program Files\Company Name\AppName\bin\cvm.exe" -f "\Program Files\Company Name\AppName\args.txt"?\Program Files\Company Name\AppName\bin\IconsLib.dll, -101args.txt
-Xbootclasspath/a:"\Program Files\Company Name\AppName\database\jsr169.jar" -classpath "\Program Files\Company Name\AppName\MyApp.jar" MyApp.MainAny help is appreciated

Hello,
I just wanted to give an update on some the changes that were made to correct the problem. I changed to using relative paths. Here's what was done to the args.txt file:
-Xbootclasspath/a:".\\database\jsr169.jar" -cp "\.MyApp.jar" myapp.MainThe error I'm receiving now is:
java.lang.ClassNotFoundException: myapp.Main
at sun.misc.Launcher$AppClassLoader.findContainer(Native Method)
at sun.misc.Launcher$AppClassLoader.access$400(Unknown Source)
at sun.misc.Launcher$4.run(Unknown Source)
at java.security.AccessController.doPrivileged(Unknown Source)
at java.security.AccessController.doPrivileged(Unknown Source)
at sun.misc.Launcher$AppClassLoader.doClassFind(Unknown Source)
at sun.misc.Launcher$AppClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.misc.CVM.runMain(Unknown Source)
any help is appreciated.
Edited by: wrappingduke on Nov 29, 2008 11:53 AM

How can i copy a dbx executable to other machine to run without installion

How can i copy a dbx executable to other machine to run without installion whole workshop
packet??? how to generate a configuration for dbx alone???
thanks

Hi, thanks for you help.
actually, I have once copied dbx to other machine. certainlly, it needs a license. But when I copied
a license file from the directory /opt/SUNWspro/license-dir/ of machine that installed Workshop
to another machine that i want to run dbx. dbx starts correctly. but when i type
$ dbx ipCentrex
it prints following message:
dbx: warning: cannot find global initialization file: dbxrc
/opt/wacos/./.dbxrc[1]: syntax error
dbx: installation problem, can't find help file: ./SUNW_SPRO_Dbx_help.info
_find_executable: not found
To suppress this message, add the following line to your .dbxrc file:
dbxenv suppress_startup_message 6.2
Reading ipCentrex
dbx: warning: setuid program exec()ed. Reattaching
There might be too many LWP's in this process.
See `help dbxenv' under mt_scalable.
dbx: Cannot open lwpstatus.
dbx: warning: process initialization failed
dbx: warning: can't find file "/opt/wacos/server/feature_server/bin/obj/ipCentre
x/ipcentrex_main.o"
dbx: warning: see `help finding-files'
when it says that has errors in .dbxrc file, I can remove this file. But the critical error is why it says
too mamy LWP's in this process? when I debug it at a machine that installed workshop, this error not occurs.
anyone have answer?

How long does it take to run execute dbms_stats.gather_dictionary_stats

Hello,
How long does it take to execute dbms_stats.gather_dictionary_stats? I need to run this prior to upgrading 10.2.0.2 aix to 11.2.0.2. I like to know how long it takes to execute because this is a very busy Production system and I do not want to take too much resource and db time from a busy Production system. Thank you.

I guess that is when Resource Manager comes into play:
http://download.oracle.com/docs/cd/B14117_01/server.101/b10739/dbrm.htm

How to run executable after installation?

Hi everyone,
I created an installer from one labview program with the application builder
of Labview7.1 for my customer, and this installer will be burned
on a CD. There are several configuration files which should be always
modified, so I want to give the customer a possibility that he can
change them by himself without creation of a new installer , I think the
"run executable after installation" is the way to do it, but I don't know
how to implement such an executable command to copy some files from CD to
the destination directory which the program should be installed, could
anyone give me some tips? Thans a lot!
Le

When you setup your build file, add the files using SourceFile Tab>>add support files, then click on custom destination, here you can add support files during installation. Hope this is what you are looking for.
Paul
Paul Falkenstein
Coleman Technologies Inc.
CLA, CPI, AIA-Vision
Labview 4.0- 2013, RT, Vision, FPGA

How to run execute immdiate with variables

Hi friends,
How to run execute immdiate with variables in v_stmt below?
I dont know how to declare the value of i here.
Set serveroutput on;
DECLARE
   i        VARCHAR (20);
   v_stmt   VARCHAR2 (100);
   CURSOR c
   IS
      SELECT sqlid FROM temp1;
BEGIN
   OPEN c;
   LOOP
      FETCH c INTO i;
      EXIT WHEN c%NOTFOUND;
      DBMS_OUTPUT.put_line (i);
      v_stmt := 'select * from table(dbms_xplan.display_cursor('&i',null))'
      execute immediate v_stmt;
   END LOOP;
   CLOSE c;
END;
/Regds,
Kunwar.

You first need to use a bind variable (named ':v' in SQL statement in my example):
set serveroutput on;
DECLARE
   i        VARCHAR (20);
   v_stmt   VARCHAR2 (100);
   CURSOR c
   IS
       -- modified for a quick test
      SELECT sql_id FROM v$sql where child_number > 2;
BEGIN
   OPEN c;
   LOOP
      FETCH c INTO i;
      EXIT WHEN c%NOTFOUND;
      DBMS_OUTPUT.put_line (i);
      v_stmt := 'select * from table(dbms_xplan.display_cursor(:v,null))';
      execute immediate v_stmt using i;
   END LOOP;
   CLOSE c;
END;
/However because your SELECT statement returns several rows you need to adapt your code to process all rows returned (as already suggested in first reply to your message).
Instead of using PL/SQL, I recommend to generate a SQL file using only SQL and then to run the generated SQL file.
For example:
spool edx.sql
set serveroutput on
declare
v_stmt varchar2(100);
v_q char(1):='''';
begin
dbms_output.put_line('spool edx.log');
for s in (select sql_id from v$sql where child_number >2)
loop
dbms_output.put_line('select * from table(dbms_xplan.display_cursor(' || v_q || s.sql_id || v_q || ',null));');
end loop;
dbms_output.put_line('exit');
end;
spool ofThis generates a SQL file similar to :
spool edx.log
select * from table(dbms_xplan.display_cursor('5rygsj4dbw6jt',null));
select * from table(dbms_xplan.display_cursor('5rygsj4dbw6jt',null));
select * from table(dbms_xplan.display_cursor('5rygsj4dbw6jt',null));
select * from table(dbms_xplan.display_cursor('fsbqktj5vw6n9',null));
select * from table(dbms_xplan.display_cursor('6q42j0018w7t8',null));
select * from table(dbms_xplan.display_cursor('a5mmhrrnpwjsc',null));
select * from table(dbms_xplan.display_cursor('3c1kubcdjnppq',null));
select * from table(dbms_xplan.display_cursor('3c1kubcdjnppq',null));
select * from table(dbms_xplan.display_cursor('9gkq7rruycsjp',null));
select * from table(dbms_xplan.display_cursor('f0wj261bm8snd',null));
select * from table(dbms_xplan.display_cursor('ab3swhv5g138y',null));
select * from table(dbms_xplan.display_cursor('6vgvyh4xw9c5g',null));
select * from table(dbms_xplan.display_cursor('ak5crjygnpk60',null));
select * from table(dbms_xplan.display_cursor('9p6bq1v54k13j',null));
select * from table(dbms_xplan.display_cursor('19x1189chq3xd',null));
select * from table(dbms_xplan.display_cursor('7sx5p1ug5ag12',null));
select * from table(dbms_xplan.display_cursor('730vdzhng6m6g',null));
select * from table(dbms_xplan.display_cursor('730vdzhng6m6g',null));
select * from table(dbms_xplan.display_cursor('0v3dvmc22qnam',null));
select * from table(dbms_xplan.display_cursor('0v3dvmc22qnam',null));
select * from table(dbms_xplan.display_cursor('a1zv6wju3ftgv',null));
select * from table(dbms_xplan.display_cursor('7ng34ruy5awxq',null));
select * from table(dbms_xplan.display_cursor('7ng34ruy5awxq',null));
select * from table(dbms_xplan.display_cursor('b2gnxm5z6r51n',null));
select * from table(dbms_xplan.display_cursor('b2gnxm5z6r51n',null));
select * from table(dbms_xplan.display_cursor('g4gp07gt2z920',null));
select * from table(dbms_xplan.display_cursor('1gu8t96d0bdmu',null));
select * from table(dbms_xplan.display_cursor('g00cj285jmgsw',null));
select * from table(dbms_xplan.display_cursor('g00cj285jmgsw',null));
select * from table(dbms_xplan.display_cursor('g00cj285jmgsw',null));
select * from table(dbms_xplan.display_cursor('bn4b3vjw2mj3u',null));
select * from table(dbms_xplan.display_cursor('38243c4tqrkxm',null));
select * from table(dbms_xplan.display_cursor('2abjfnvy5rkyg',null));
select * from table(dbms_xplan.display_cursor('350f5yrnnmshs',null));
select * from table(dbms_xplan.display_cursor('350f5yrnnmshs',null));
select * from table(dbms_xplan.display_cursor('3s1yukp05bzg6',null));
select * from table(dbms_xplan.display_cursor('3s1yukp05bzg6',null));
select * from table(dbms_xplan.display_cursor('1tgukkrqj3zhw',null));
exit
PL/SQL procedure successfully completed.Edited by: P. Forstmann on 20 mars 2013 19:06
Edited by: P. Forstmann on 20 mars 2013 19:33

How can I perform a silent install of an application AND use "run executable after installation"

I am trying to do a silent install of a program I built using LabVIEW 8.5. I also need to call an exe after the installation, so I am using the "run executable after installation" option on the Advanced tab of the installer. I then pass the following command lines to the setup.exe:
/qb /acceptlicenses yes /r
This installs the LabVIEW program successfully, but does not then run the additional exe afterward. If I run the setup.exe normally (with no command line parameters), the additional exe gets run.
Thanks,
Jason

jmburns wrote:
I am trying to do a silent install of a program I built using LabVIEW 8.5. I also need to call an exe after the installation, so I am using the "run executable after installation" option on the Advanced tab of the installer. I then pass the following command lines to the setup.exe:
/qb /acceptlicenses yes /r
This installs the LabVIEW program successfully, but does not then run the additional exe afterward. If I run the setup.exe normally (with no command line parameters), the additional exe gets run.
Thanks,
Jason
This problem is fixed in a future release of LabVIEW. Here's the CAR ID 67549 for tracking purposes.
Message Edited by Bob P on 07-10-2008 09:10 AM

Bought from a friend, have apple account how do I run executable files when I cannot find the administrator sign in . I mean where in system file do i open administrator log in?

Am wanting to run executable files where in system is the administrator sign in?

If you are talking about .exe files, macs can't run those. Look for a .dmg version.

Running executable on clients,Share your experience

I have installed Oracle 9i AS on application server environment and deployed my forms and big application on this env.
Now I tried to run my reports (created as executable files) and they opened at the server and hangs the client till I close the exe. on the server.
Any body knows how can I deal with the client to run executable or share your experience.
Many Thanks
Adel Yousef

I've done some evaluation of Forms and Reports 6i. Of the two, Reports seems to have most of the problems, but that is another discussion. From my notes I can recall:
Forms layout: If you delete a frame, all prompts dissapear. Reappear
when you close and open layout again.
Forms generic: Readme says 6i is patch compatible with 6.0. If you modify a form with a static record group in 6.0.8 it works ok. If you then recompile with 6.0.5 all static record group values are gone!
The bug where you may not get the property palette by pressing F4
before other windows have been activated still exists.
It appears that the (layout) window has focus, and from GUI point
I think it does, but cant receive events.
This behaivour can something be noticed in runtime also.
I don't think it is a problem with Windows as no other application
has this behaviour.
The issue of existing state of package
still exists, must try it with sql+
If you change a stored procedure in a way
that its signature doesnt change, forms
runtime still complains the first time
you call the procedure. The second time
it works ok. Strange.
Could not generate form with Ctrl+T. Tried Sh+Ctrl+K but got
PDE-PER001 Internal error (depep 2).
Tried again, worked.
Runtime: Why are all my prompts with background=white?
Charles M Kivio
Carus Ab
Certified Oracle Solution Partner
null

How to trace an already running session

Hi,
Sometime I come across following situation.
Queries/SQL statements keep on running for a long time and users complain about the same.
But since they have already started I am not able do anything about it.
So please guide me "how can I trace already running session."
Thanks,
Rushi

Rushi Shah wrote:
Hi,
Sometime I come across following situation.
Queries/SQL statements keep on running for a long time and users complain about the same.
But since they have already started I am not able do anything about it.
So please guide me "how can I trace already running session."
http://www.petefinnigan.com/ramblings/how_to_set_trace.htm
Use DBMS_SUPPORT to set trace in another users session
Next use the interface to again set trace for SCOTT's session that we found earlier. here it is:
     SQL> exec dbms_support.start_trace_in_session(10,20,waits=>true,binds=>false);
     PL/SQL procedure successfully completed.
     SQL> -- execute some code
     SQL> exec dbms_support.stop_trace_in_session(10,20);
     PL/SQL procedure successfully completed.
     SQL>

How many times can I run PSConfig.exe -cmd upgrad .... command

I'm getting VSS error in my eventlog -> application. I was getting 8213 and followed http://technet.microsoft.com/en-us/library/cc734219(v=ws.10).aspx and
now I'm gettting 8230.
Meanwhile my backups not are running. I remember running PSConfig command when I first installed windows and sharepoint 2010 on this box for system backup to work correctly.
Now I run WMIC QFE LIST FULL /Format:HTable > C:\Temp\HotfixList.html to retrieve all the installed update to check if KBs
2460045 or 2687453 are installed unnoticed but I don't have any history of installed updates suprising eh!
Now I want to run
PSConfig.exe -cmd upgrade -inplace b2b -force -cmd applicationcontent
-install -cmd installfeatures
just incase one of them have been installed unnotice.
How many times can I run this PSConfig command? How dangerous is this decision?

You can run it as many times as you want, but it will take SharePoint down on that particular server (resets IIS, for example), while it executes.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

How To: Elliminate prompt to run executable on strage device for WRT610n

Similar Messages

Maybe you are looking for