How to enable disable result status of callable object in Guided Procedures

hi,
Currently we are using guided procedures to handle Life Event changes in ESS. Each process has sequential block with Respective actions and callable object assigned to each action.
Most of the callable objects we are using are either standard Java Webdynpro screens that came with ESS business package or custom ABAP Webdynpro's. When we created callable objects with these web dynpro's there is tab that sets result status like "Complete", "Exit" etc.
The issue we are currently facing with result status is, there is no way that control is passed to result status enabled for specific step of guided procedure from the callable object. For example we created callable object for Benefits enrollment screen with result status "Complete". When user initiated guided procedure to make changes to Benefits enrollment, make changes to plans and click save. Once User click Save we want to send control to result status to get enable, till then we don't want the "Complete" button to be enabled on the Guided procedure step.
Is there way to control the result status button based on the action performed by user in respective screen/step of Guided Procedure?
Could someone suggest is there better replacement for guided procedures where I can use some other framework/process to achieve better functionality than GP's.
Thanks
Ravi.

migrate to BPM

Similar Messages

Callable object and Guided procedures

Hi all,
Where we use callable objects? i want to know about the basic of callable object and guided procedure?
sorry if my question is very silly

Hi again
Callable objects can be many types, including applications (like web dynpro), services (e.g. web services), remote function modules, intercative and composite forms, etc.
The GP framework comes with a set of ready-to-use COs that you can see when you open the Create Callable Object wizard. Here is a list of the so-called predefined COs in GP:
http://help.sap.com/saphelp_nw70/helpdata/en/0f/619fd378a641b29386063019c24fc4/content.htm
Since applications and services themselves are of various types, here is a link for creating COs of those types in GP design time:
http://help.sap.com/saphelp_nw70/helpdata/en/da/a680415dc6050de10000000a1550b0/content.htm
You can also implement your own callable object type, but here you have to use the NW Developer Studio, apart from the GP worksets. Here is a link to give an overview:
http://help.sap.com/saphelp_nw70/helpdata/en/43/e74cb156b60a29e10000000a11466f/content.htm
Finally, here is a document that gives general info about exposing applications as COs and links to various areas, connected to CO implementation and usage in GP:
http://help.sap.com/saphelp_nw70/helpdata/en/08/d88041a17e060de10000000a1550b0/content.htm
Hope that is helpful
Greetings and good luck with the reading
Petra

Callable object in Guided Procedures. How to get its type?

Good day. How can I get whether a CO is in the display mode or not? I need to get some flag and pass it to some application. Then I can disable buttons if the mode is display and vice versa.

Dear Kirill,
here's an idea:
IGPActionInstance actInst = rtm.getActionInstance(procId, actId, userContext);
IGPDesigntimeUpdateManager dtum = GPProcessFactory.getDesigntimeUpdateManager(userContext);
IGPModifiableAction actionTpl = dtum.openAction(actInst.getTemplate().getID(), actInst.getTemplate().getVersionNumber());
From actionTpl you will be able to check whether the current action has a DisplayCO by getting
actionTpl.getDisplayCallableObject() and checking for null.
I hope that helps.
Best regards,
George.

How to enable/disable the input fields based on the data entered/user action in the web dynpro abap?

How to enable/disable the input fields based on the data entered in the web dynpro application abap? If the user enters data in one input field then only the next input field should be enabled else it should be in disabled state. Please guide.

Hi,
Try this code.
First create a attribute with the name readonly of type wdy_boolean and bind it read_only property of input field of which is you want to enable or disable.
Next go to Init method.
Set the readonly value as 'X'.
DATA lo_el_context TYPE REF TO if_wd_context_element.
     DATA ls_context TYPE wd_this->element_context.
     DATA lv_visible TYPE wd_this->element_context-visible.
*   get element via lead selection
     lo_el_context = wd_context->get_element( ).
*   @TODO handle not set lead selection
     IF lo_el_context IS INITIAL.
     ENDIF.
*   @TODO fill attribute
*   lv_visible = 1.
*   set single attribute
     lo_el_context->set_attribute(
       name = `READONLY`
       value = 'X').
After that Go to the Action ENTER.
First read the input field ( first input field, which is value entered field) , next give a condition
if input value is not initial then set the readonly value is ' '.
DATA lo_nd_input TYPE REF TO if_wd_context_node.
     DATA lo_el_input TYPE REF TO if_wd_context_element.
     DATA ls_input TYPE wd_this->element_input.
     DATA lv_vbeln TYPE wd_this->element_input-vbeln.
*   navigate from <CONTEXT> to <INPUT> via lead selection
     lo_nd_input = wd_context->get_child_node( name = wd_this->wdctx_input ).
*   @TODO handle non existant child
*   IF lo_nd_input IS INITIAL.
*   ENDIF.
*   get element via lead selection
     lo_el_input = lo_nd_input->get_element( ).
*   @TODO handle not set lead selection
     IF lo_el_input IS INITIAL.
     ENDIF.
*   get single attribute
     lo_el_input->get_attribute(
       EXPORTING
         name = `VBELN`
       IMPORTING
         value = lv_vbeln ).
if lv_vbeln IS not INITIAL.
    DATA lo_el_context TYPE REF TO if_wd_context_element.
    DATA ls_context TYPE wd_this->element_context.
    DATA lv_visible TYPE wd_this->element_context-visible.
* get element via lead selection
    lo_el_context = wd_context->get_element( ).
* @TODO handle not set lead selection
    IF lo_el_context IS INITIAL.
    ENDIF.
* @TODO fill attribute
* lv_visible = 1.
* set single attribute
    lo_el_context->set_attribute(
      name = `READONLY`
      value = ' ' ).

How to Enable/Disable suppressUpload and suppressDownload

my xml doesnt have this attribute
how to enable /disable supressUpload and suppressDownload.
<?xml version="1.0" encoding="utf-8" ?>
- <MeRepApplication schemaVersion="1.1" id="ZAM_09" version="09">
<Property name="CLIENT.BUILDNUMBER" />
<Property name="C_APPLRESOLVE" />
<Property name="DATA_VISIBLE_SHARED">X</Property>
<Property name="E_APPLRESOLVE" />
<Property name="FACADE_C_CLIENT">X</Property>
<Property name="FACADE_E_CLIENT">X</Property>
<Property name="HOMEPAGE.INVISIBLE" />
<Property name="INITVALUE" />
<Property name="RUNTIME">JSP</Property>
<Property name="TYPE">APPLICATION</Property>
- <SyncBO id="ZAM_09" version="2" type="twoWay" allowCreate="false" allowModify="true" allowDelete="false" reqDirectSync="true" downloadOrder="1">
- <TopStructure name="TOP">
- <Field name="SYNC_KEY" type="N" length="10" decimalLength="0" signed="false" isKey="true" isIndex="true">
<Input type="create">false</Input>
<Input type="modify">false</Input>
</Field>
- <Field name="BUKRS" type="C" length="4" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="ANLN1" type="C" length="12" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="ANLN2" type="C" length="4" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <ChildStructure name="010">
- <Field name="SYNC_KEY" type="N" length="10" decimalLength="0" signed="false" isKey="true" isIndex="true">
<Input type="create">false</Input>
<Input type="modify">false</Input>
</Field>
- <Field name="BUKRS" type="C" length="4" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="ANLN1" type="C" length="12" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="ANLN2" type="C" length="4" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="KOSTL" type="C" length="10" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="WERKS" type="C" length="4" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="STORT" type="C" length="10" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="TXT50" type="C" length="50" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="TXA50" type="C" length="50" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
</ChildStructure>
</TopStructure>
</SyncBO>
</MeRepApplication>

Just adding on to Nameeta's post, there is a supress download checkbox in the advanced setting s link(Settings -> Advanced Settings) on the client, this will supress downloads for all syncbos and not just for any one syncbo. Also there are no tools in the middleware to add these settings, the only way to do this is to modify the xml manually.
Best Regards,
Karthik
Message was edited by:
Karthik V Setty

How can i disable running status of recording from lock screen of iphone 5?

How can i disable running status of recording from lock screen of iphone 5?

You need to stop the recording. Is it reading Recording Paused? If so, instead of tapping the red button to stop it, tap the word DONE. That is what actually stops the recording. Tapping the red button just pauses it.

Exposing an RFC-Enabled Function Module as a Callable Object

Hi All,
I'm creating a GP Process based on the Exposing an RFC-Enabled Function Module as a Callable Object Tutorial. I'm using the error handling through a structure, the RFC works perfectly when I run it in test mode and the RFC doesn't retrieves exceptions at the structure, but when an error/exception must be returned at the structure, the test is showing this message (and also is not returning any error at the structure):
"Process exception occurred" and "Callable object implementation did not return output parameters".
What can be happening?
I'll appreciate a lot your help, regards,
María Margarita Monteverde

Hi,
Thanks a lot for your answer. My scenario is very simple :
1) the first callable object contains a web dynpro form where user can enter an ID, a name, and other informations
2) the second gets the output parameters of the first step and execute the BAPI_FLCUST_CREATEFROMDATA to add the row into the SCUSTOMER table
The problem is that no row is added. I can integrate BAPI wich allows to read data, but when I try to write (create or change) I cannot see any change.
Do you see my problem now ?
Regards,
Michael.

How to enable /disable MWI ?

Hi,
I want to write a small application to enable/disable IP Phone lamp. But confused by how to enable MWI(Message Waiting indicator). TAPI ? AXL ? or some others , which can implement it . Could you give me some direction, thank you !

I never checked what happens on a database level. However, for any actions that have a direct influence on a device, writing directly into the database is the wrong approach.
As an example: if you set a forward (callforward all) via database (and not AXL), calls may well be forwarded, but the phone's status won't be adapted (so you don't have the callforward indicator and no information about the callforward). If you set the callforward via JTAPI or AXL, the phone's status will also be updated to show that it has been forwarded.
When you configure a phone, you'll see the same thing in many cases.. especially in older CCM releases, you were often told that you need to reset the phone to apply a change you've made. In newer versions, this is often (but not always done automatically.. you'll see the phone restart after pressing update).. it's the same thing here.. you write into the database, but then you also have to apply those changes to the phone (one good example is changing a line label.. you won't get the label to change on the phone by just writing to the database.. you have to restart the phone for it to load the new label name).
Even if you need to get the mwi status, JTAPI will do that for you (CiscoAddress.getMessageWaiting - and to set it, it's CiscoAddress.setMessageWaiting). Since you need a CTI command to set the MWI, you can as well resort to CTI to get the MWI status as well and don't bother with the database.
fkcallingsearchspace_mwi is definitely not it though - I can tell you that without looking at the diagram since fk_anything is a foreign key and you have an uuid value in that field. The mwi status would be a boolean since it can have just two values. In fact, it's numplan.ismessagewaitingon but as I said.. with any element that has a direct influence on a phone's appearance or behavior, you cannot just change it... at best you need a phone reset. And if you do it with JTAPI (and probably TAPI too.. I can't be sure because I've never done TAPI and hope to never have to), you can change the MWI status on the fly without having to restart the phone, which is much more elegant.

Does anyone know how to enable/disable a dropdown menu in Forms at runtime?

Is there a way how to disable/enable dropdown menu for menus that have multiple sub levels in Oracle Forms? I am trying to use the set_menu_item_property function but this takes 'menu.item' format for the first argument. I am trying to enable/disable a menu item in the form of 'menu.item.subitem' and was not able to do it using this function. If anyone knows a different function or method, please reply. I have shown an example below.
Setup -> Software -> Front Page
From the above example, I can enable/disable Software using set_menu_item_property function. But, how do I enable/disable the Front Page menu in Oracle forms at runtime?
Thanks
Edited by: user480347 on Aug 24, 2010 3:37 PM

Yes you are on the right track. You need to pass then complete menu name to set_menu_item_property
Immediate_parent menu.item_name e.g
For example you have menu like this
Id like
A1 A10 > A1010
Home > Input > Form 1
A1 A10 > A1020
Home > Input > Form 2 To disable Form 2 you must pass menu name as
A10.A1020Hope it helps

Cmfctoolbarcomboboxbutton, how to enable/disable

Hi,
I inserted a CMFCToolBarComboBoxButton object in my toolbar. all work fine except enabling and disabling ComboBox according state of my App.
I used EnableWindow but the control still actived.
Any idea?
Tanks.
My creation code :
if (wParam == IDR_MAINFRAME24) {
m_ComboButton = new CMFCToolBarComboBoxButton(ID_MONTH_FILTER, GetCmdMgr()->GetCmdImage(ID_MONTH, FALSE),
CBS_DROPDOWNLIST);
CString strMonths, strMonth;
int i, curPos = 0;
if (strMonths.LoadStringW(IDS_MONTHS)) {
i = 1;
//m_ComboButton->AddItem(_T(""), 0);
strMonth = strMonths.Tokenize(_T(";"), curPos);
while (strMonth != _T("")) {
m_ComboButton->AddItem(strMonth, i);
strMonth = strMonths.Tokenize(_T(";"), curPos);
i++;
m_wndToolBar.ReplaceButton(ID_MONTH, *m_ComboButton);
CMFCToolBarComboBoxButton * pMonthCombo = CMFCToolBarComboBoxButton::GetByCmd(ID_MONTH_FILTER, FALSE);
if (pMonthCombo) {
pMonthCombo->SetCenterVert(false);
pMonthCombo->SetText(_T("Advanced filter"));
pMonthCombo->EnableWindow(FALSE);

Tank you for your help.
you are right, but a update cammand ui message is not send by CMFCToolBarComboBoxButton object.
I make a test on my side and mesajflaviu's suggestion really helpful. Using ON_UPDATE_COMMAND_UI macro, I can disable the CMFCToolBarComboBoxButton in the CMFCToolBar. See my test code snippet:
BOOL m_enable; //use to detect if enable the combo box
afx_msg void OnUpdateCombo(CCmdUI *pCmdUI);
ON_UPDATE_COMMAND_UI(IDR_COM, &CMainFrame::OnUpdateCombo)
void CMainFrame::OnUpdateCombo(CCmdUI *pCmdUI)
pCmdUI->Enable(m_enable);
void CMainFrame::OnEditDisable()
// TODO: Add your command handler code here
m_enable = FALSE;// use a menuitem to disable the combo box
///////create the CMFCToolBarComboBoxButton//////////
LRESULT CMainFrame::OnToolbarReset(WPARAM wp, LPARAM lp)
UINT uiToolBarId = (UINT)wp;
TRACE("CMainFrame::OnToolbarReset : %i\n", uiToolBarId);
switch (uiToolBarId)
case IDR_TOOLBAR1:
m_ComboButton = new CMFCToolBarComboBoxButton(IDR_COM, GetCmdMgr()->GetCmdImage(IDR_COM, FALSE), CBS_DROPDOWNLIST);
m_ComboButton->EnableWindow(true);
m_ComboButton->SetCenterVert();
m_ComboButton->SetDropDownHeight(25);
m_ComboButton->SetFlatMode();
m_ComboButton->AddItem(_T("OPTION1"));
m_ComboButton->AddItem(_T("OPTION2"));
m_ComboButton->SelectItem(0);
m_wndToolBar.ReplaceButton(IDR_COM, *m_ComboButton);
break;
return 0;
Check the result screenshot:
Enable:
Disable: Color is turning yellow and cannot click
Best regards,
Shu
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to enable/disable button

Hi,
i m new to pcui, i got how to hide the button in toolbar group. but could you please guide be how to enable r disable the button which is in toolbar group.
thanks in advance

Hi venkat,
Follow the step, it's example of Lead CRMD_BUS2000108 & View is *ZMSR_RE5 *
1)     Go to CRMC_PCUITOOLS.
2)     Go to Analysis Tools -> Determine the Correct Model Access Class.
3)     Give Application - CRMD_BUS2000108 & View ZMSR_RE5 & execute.
4)     Click on New -> MFT Sales (Transaction type)
5)     Note Toolbar Group - > LEA_SR_50.
6)     Go to CRMC_BLUEPRINT_C.
7)     Go to Toolbar Group -> Toolbar Group Structure.
8)     Give Toolbar Group - LEA_SR_50.
9)     Search for ZMSR_RE5 Toolbar elements.
10)     Click on Details.
11)     Check whether FLAG is Not Set in Exp. Display. Choose Flag set Event has Occurred to Hide the Button.
it will help u
On.........................

How to Enable/Disable MessageTextInput Read Only property in PFR?

Dear All,
When i click on a submit button i need to enable/disable the Read only property of MessageTextInput item.
Can any one tell me how to do this?
I am executing the code
if (pageContext.getParameter("EnableBT") != null) {
OAMessageTextInputBean beanEmployeeIdCL = (OAMessageTextInputBean)webBean.findIndexedChildRecursive("EmployeeIdCL");
beanEmployeeIdCL.setReadOnly(false);
When i used the above code in Process Form Request method it is showing developer mode exception in run time as we can call the above code only in Process Request form.
Request to please help regarding this.
Thanks & Regards,
CAK

CAK,
You need to make use of Partial Page Rendering (PPR) & SPELL. Modifying the bean property in PFR is not supported in OAF.
Refer - PPR section of Devguide for more.
Regards
Gyan

HT3771 how do i disable printer status reports

how do i disable the printer status reports

What printer status reports? That's not something that a Mac creates - that's something you've set up on your printer.
Matt

How to enable / disable SSRS Parameter

Hi
I want to enable a parameter called "start date" (type is date) when another (value from dropdown) parameter is selected
Say for an example, i have below 3 parameters
1. drop down which 2 values called "vtextbox","vdate"
2. start (data type is date)
3. finish (data type is date)
when i select "vdate"value from the dropdown 2nd and 3rd parameters has to be enable
similarly when i select "vtextbox" value from the dropdown 2nd and 3rd parameter has to disable
I have searched many forums every one says this is not possible in report manager interface
But this is possible in custom code
please make a note all three parameters are independant
It would be great if any one provide the custom code for same
Regards
Santosh

Hi itsmesantosh1982,
According to your description, you want to use a parameter to control enable/disable other two parameters. Right?
In Reporting Services, when we create a parameter, this parameter has been enabled. The only way you want to disable the parameter is deleting it. In this scenario, disable the two parameter is same as selecting all values in these two parameters. So
we can just modify the default values in 2nd and 3rd parameter instead of using cascading parameter. We can create a dataset, put in the query below:
IF @Param='vtextbox'
select distinct startdate from [table]
else
select '[value]'
The [value] can be any value which is not existing in [table]. So when you select 'vtextbox', the default value will be all values in the table. If you select 'vdate', it will need you to select value automatically because the return value is not existing
in the table. This can be an effective workaround for your requirement.
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

How to change the result status "Failed" after the test to "Passed"

We make a picture of a LCD screen and look if its all working. Sometimes the LCD screen is working propper but the Step Failed. In case automatic LCD test fails we show the picture from the camera to the user and he can decide if the LCD screen passed or failed. So when the user decide that the screen is working propper we should overwrite the status of the automatic test that in the report and database shows lcd screen test passed. I tried with
RunState.SequenceFile.Data.Seq["Check_LCD_V3-0"].Main["154 Execute - All Horizontal Segments On"].Result.Status="Passed",
RunState.SequenceFile.Data.Seq["Check_LCD_V3-0"].Main["154 Execute - All Horizontal Segments On"].Result.PassFail="True",
But in the database the Status of this step is still "Failed"
What i do wrong?
Thanks
Solved!
Go to Solution.

Alteschwed wrote:
We make a picture of a LCD screen and look if its all working. Sometimes the LCD screen is working propper but the Step Failed. In case automatic LCD test fails we show the picture from the camera to the user and he can decide if the LCD screen passed or failed. So when the user decide that the screen is working propper we should overwrite the status of the automatic test that in the report and database shows lcd screen test passed. I tried with
RunState.SequenceFile.Data.Seq["Check_LCD_V3-0"].Main["154 Execute - All Horizontal Segments On"].Result.Status="Passed",
RunState.SequenceFile.Data.Seq["Check_LCD_V3-0"].Main["154 Execute - All Horizontal Segments On"].Result.PassFail="True",
But in the database the Status of this step is still "Failed"
What i do wrong?
Thanks
I recommend the following:
1) Make the automated LCD test an Action step rather than a Pass/Fail step and instead set a local variable to whether the automatic LCD test failed (e.g. Locals.AutomatedLCDFailed).
2) Create a new Pass/Fail test (using the none adapter) that takes both the local variable and the user's input into account to determine it's pass/fail status (e.g. Set the step's data source to an expression like: !(Locals.AutomatedLCDTestFailed && Locals.UserLCDTestFailed)
As an alternative to making 1) an Action step you could leave it a pass/fail step and uncheck the step setting on it for "Step failure causes sequence failure". Then you could use the status of that step instead of Locals.AutomatedLCDTestFailed. The one difference is that the automated test will still show up as failed in your report even though the sequence can still be passed. It's somewhat a matter of preference.
Hope this helps,
-Doug

How to enable disable result status of callable object in Guided Procedures

Similar Messages

Maybe you are looking for