How to enable login screen which doesn't require a password

I'm setting up an image for a computer lab. The computers that are currently in this lab auto login. However, in the off case that a student accidentally (or maybe purposefully) locks the computer, we want them to be able to simply click the user account
picture and it logs in without asking for a password. The current Windows 7 PCs in this lab work that way, but whoever set them up can't remember how this was accomplished and I can't figure out for the life of me how to get it done. Currently, if I lock the
PC, it just brings me to the login screen with a blank username & blank password field.
These machines are not on the domain. Does anyone have any idea how to get this behavior out of the login screen?

BYPASS LOGIN
Open a Run window (Windows Logo key+R), type netplwiz and press Enter. Remove the tick from “Users must enter a user name and password” > OK. You may have to type the user account name/password just the once to complete the process.
BYPASS ENTERING A PASSWORD AFTER WAKEUP
To bypass entering a password after hibernation, go to Control Panel > All Control Panel Items > Power Options > Require a password on wakeup (in the left pane) and put a check mark in Don’t require a password.
Ninety-nine per cent of politicians give the rest a bad name.

Similar Messages

How to enable the screen after triggering the error message

Hi All,
we have a tcode IW31, in that one field(WBS element -PROID) is not mandatory. so we have written the following code to make it mandatory in a user exit EXIT_SAPLCOIH_010.It's triggering the error message, but it is going into disable mode. Please sugget me how to enable the screen after getting the error message triggering.
if not caufvd_imp-proid is initial.
select single * from t350 into wa_t350
          where auart    = caufvd_imp-auart
            and imord    = 'X'.
if sy-subrc is initial.
    pspel = caufvd_imp-proid.
else.
    call function 'CONVERSION_EXIT_ABPSP_OUTPUT'
         exporting
              input = caufvd_imp-proid
         importing
              output = l_posid.
    concatenate text-t10 l_posid text-t11
                into l_textline1 separated by space.
    message i208(00) with l_textline1.
endif.
else.
message e208(00) with 'Please maintain WBS element in Location Tab'.
endif.
Thanks

Hi,
Instead of error message use status message like
message s208(00) with 'Please maintain WBS element in Location Tab'.
Leave to screen sy-synnr.
This will allow to move to the screen and have in enable mode.
WIth Regards,
Dwaraka.S
Edited by: Dwarakanath Sankarayogi on Feb 13, 2009 7:46 AM

How to enable touch screen stylus in photoshop: Dell Inspiron 13: windows 8?

How to enable touch screen stylus in photoshop: Dell Inspiron 13: windows 8?

You don't need to enable anything. For it to work you need a touch screen display and a pressure sensitive pen. Not a capacitive pen like those used on a iPad.
A capacitive pen will work with the interface but not the brush tool.

My iphone won't switch on - it has the apple symbol on the screen which doesn't go away. I connected to itunes but itunes is not connecting??

my iphone won't switch on - it has the apple symbol on the screen which doesn't go away. I plugged phone into itunes but itunes is not connecting??

Basics from the manual are restart, reset, restore.
Try a reset.

After I use the camera icon on the lock screen it doesn't requires password to use the iPhone, After I use the camera icon on the lock screen it doesn't requires password to use the iPhone

After I use the camera icon on the lock screen it doesn't requires password to use the iPhone,

You have the password requirement set to something other than "Immediate".
Settings > General > Password Lock > Require Password

How to enable 'login assitance' in oracle apps login screen?

Hi experts,
I want to enable the login assitance option in oracle apps Initial screen(User login screen). Please guide me
Thanks & Regards,
Kanish

Kanish wrote:
It can be done through personalization for my version 12.1.1
Thanks
kanishYes.
Tips For Personalizing The E-Business Suite R12 Login Page (MainLoginPG) [ID 741459.1]
How to change text of "Login Assistance" link in login page for Oracle Applications R12 [ID 561403.1]
Thanks,
Hussein

How to handle RunTime Faults which doesn't list under System Faults?

Hi,
I have a doubt regarding runtime faults in BPEL 1.1.In BPEL 1.1 some of the run time faults are categorised as system faults.So we can handle those run time faults
using the faultname or namespace(http://schemas.oracle.com/bpel/extension) of system fault itself.But 'SublanguageExecutionFault' is a run time fault which doesn't list under system faults.
So what namespace it belongs to?Can we use the same namespace of system fault for this kind of runtime faults ?
Are any other runtime faults existing which don't have the same namespace of sytem faults?So how can we identify and handle those run time faults?

You can create a role menu as remote enabled remote menu.
The authority checks will happen on the remote side, also against objects which don't exist in the calling system as the music is on the other side.
On the RFC client system side, you only need the parameter transaction to start the remote transaction in the remote system.
See the documentation on SYST function module ABAP4_CALL_TRANSACTION.
This is however a rather antiquated technology... it is more popular to use a SAP Portal or webdynpro applications for this sort of thing (the user does not notice the difference) or later versions of such integration such as Fiori UIs or imbedded links within the Business Client.
I don't want to lean out the window too far, but the buggy phase of these new things is approaching an end and they are usable if you are on newer releases. Then you can pool the menu and use APIs for navigation and no more irritating S_TCODE checks.
Cheers,
Julius

How to Enable Full Screen Viewing?

Hi
I want to upload flv files to my website. I have got it worling fine - insert media - flv - progressive download - etc. When I view the file in the testing server it does not have the option to "view in full screen" which I need as I want to keep the preview windows small and have several videos on the one page. Is there code I need to enter in addition to that generated by Dreamweaver? I'm not familiar with Flash Pro or Media Encoder but I do have access to them if t makes the whole process easier. Thanks in advance

I know I posted this in the Flash forum but I'm not actually using Flash Pro as I don't have a 64bit computer. Dreamweaver CS5 doesn't have any skins with fullscreen options. What should I be doing to the file before uploading it? I have access to most Adobe products if you can point me in the right direction.
Cheers

How to creat login screen in oracle forms 10g.

Hello I want to make a login form wher a database user will connect to the application and other forms.
Must note that I have database users for login like hr, scott etc.I dont want to make users in a just table.
I want to show a beatifull screen which will be our main form and there will be a login button then a user will put its credentials and then dashboard will be open.
please guid me about this.bcz i made a form and call
f
Logon_Screen;
but its going work properly and show message raise form trigger failure.

Could share your error message?
>>Must note that I have database users for login like hr, scott etc.I dont want to make users in a just table.
what it means?

How to enable full screen mode by default?

How do I enable full screen mode in apps by default?

There is no mechanism in the OS for that.
Some apps will reopen the mode you left them.
charlie

How to eliminate login screen

I would like to just open my laptop and start using it without having to loging everytime I open it if it's still running.
I have it started up, but I'll close it during the day, not turn it off just close the machine. But everytime I open it, it prompts me to log in. I get that I should log in the first time I start it up, but if it's just sleeping and I need to wake it up, I don't like to log in again.
So yeah, how does one eliminate the login screen?
Thank you.

Thank you guys. I actually did both and both helped. macjack's answer allowed the stuff to still run in the background, but I still had to log in, whereas CT's eliminated the login screen altogether.
Thank you for the help.

How to disable Login Screen in SRM

Hi All,
Client has enabled SSO in their system and SRM is part of it. Hence they are not directed to SRM login page.
But for certain cases and unknown reasons, the login page appears. So they want to diable the login screen page and display error text instead.
I tried to modify the template BBPGLOBAL - Login, but is not successful. Even if I comment out the whole code in the template,the screen is displayed.
Is this something to do with ITS ?

Hi ,
Go through the OSS Note : 778488
Also see the following link:
Re: SRM portal page customization
Login screen
Hope this helps.
Thanks,
Pradeep.

How customize the Login Screen

I have put a login portlet on my portal homepage and set it as the default homepage. but when i try to get on it by URL, it always bring me to sigle sign on page to login.
can anybody tell me how to set this homepage to be login screen?
thanks a lot!!

Hi,
Make this page the default home page for the public user. This way this page will be the first page before login.
Thanks,
Sharmila

How to Activate the Table which Doesn't Exist - Can I create Table in SE11

Hi Gurus,
I am a BASIS Person ..so, I don't have much idea about ABAP Developement side . But, while applying patches to one of the SAP Component, I get the following error message ( usr\sap\trans\log ) :
Phase Import_Proper
>>>
SAPAIBIIP7.BID
1 ED0301 *************************************************************************
1 EDO578XFollowing objects not activated/deleted or activated/deleted w. warning:
1EEDO519X"Table" "WRMA_S_RESULT_DATA" could not be activated
1EEDO519 "Table Type" "WRMA_TT_UPDTAB_DSO" could not be activated
1 ED0313 (E- Row type WRMA_S_RESULT_DATA is not active or does not exist )
2WEDO517 "Domain" "WRMA_KAPPL" was activated (error in the dependencies)
2WEDO517 "Data Element" "/RTF/DE_FISCPER" was activated (error in the dependencies)
2WEDO517 "Data Element" "/RTF/DE_FISCVARNT" was activated (error in the dependencies)
2WEDO517 "Data Element" "WRMA_DE_RCLASV" was activated (error in the dependencies)
2WEDO517 "Data Element" "WRMA_DE_RMA_AMNT" was activated (error in the dependencies)
2WEDO517 "Data Element" "WRMA_DE_RMA_INV" was activated (error in the dependencies)
2WEDO517 "Data Element" "WRMA_DE_RMA_OBJ" was activated (error in the dependencies)
2WEDO549 "Table" "V_WRMA_TRCLASVER" was activated (warning for the dependent tables)
2WEDO549 "Table" "V_WRMA_TRCLASVPE" was activated (warning for the dependent tables)
2WEDO549 "Table" "V_WRMA_TRCLPERCL" was activated (warning for the dependent tables)
2WEDO549 "Table" "WRMA_S_STOCK_SELECTION_DATE" was activated (warning for the dependent tables)
<<<
Now, I checked Domain WRMA_KAPPL in SE11 and it diplays that it is partially active :
" The obeject is marked partially active for the following reasons :
   Errors occured when adjusting dependent Objects to a change. Some of the dependent objects could not
   be adjusted to this change. To adjust the dependent objects, you must perform the following actions
   the next time you activate this object.
                    - SET THE SYNP TIME STAMP IN THE RUNTIME OBJECT OFALL DEPENDENT OBJECTS
My question is - how to activate this SYNP Time Stamp.. ?
                      - Once I activate this SYNP Time Stamp.. How do I activate this ..in SE11 or some other
                        TCode..
Any / ALL Help is highy appreciated and would be rewarded with appropriate Reward Points.
Thanks,
Regards,
- Ishan
>> Ok, Now I forcefully activated the Domain and then all the 5 Data Elements in SE11 ...now I have error
     that table WRMA_S_RESULT_DATA and WRMA_TT_UPDTAB_DSO Could not be activated...
     ..And in SE11 > Input the first / Second Table > Excute > Output : Table Does not Exist !!!
      - Now, How do I activate something which does not exist in the first place ?
    Any Input about this ?
Thanks,
Regards,
- Ishan
Edited by: ISHAN P on Jun 19, 2008 3:44 PM

Read note 1152612 - Incorrect component type in structure WRMA_S_RESULT_DATA.
The error occurs in Release BI_CONT 703 Support Package 9.
If you require an advance correction for Support Package 9, make the following manual changes if the InfoObject 0TCTLSTCHG is inactive in your system.
1. Use transaction RSA1 to call the Data Warehousing Workbench.
2. Check whether the InfoObject 0TCTLSTCHG was already activated by the compilation process the first time you called transaction RSA1. You can use transaction RSD1 to check this by entering 0TCTLSTCHG in the "InfoObject" field and choosing "Display". Proceed as follows if the InfoObject is still not active:
3. Go to BI Content activation.
4. Select "Object Types".
5. Open the "InfoObjects" tree and select "Objects".
6. Search for the InfoObject 0TCTLSTCHG and select it.
7. Transfer the object and activate it.
These steps activate the required component type /BI0/OITCTLSTCHG. You can check again in transaction RSD1 to ensure that the InfoObject 0TCTLSTCHG is available as active.
Jacek Fornalczyk

Here is how to enable full screen mode for AIR Mac Desktop Apps

I just discovered that with a very simple native extension method, I can enable full screen mode for AIR Mac Desktop Applications.
This gets you the full screen icon in the top right, and it works perfectly with no changes to my code. (Obviously only works on Lion and above, since this is a Lion feature)
Enjoy.
Here's the code:
    FREObject _EnableFullScreenMode(FREContext ctx, void* functionData, uint32_t argc, FREObject argv[])
        //We should be okay to do this, even on 10.6, according to this post:
        //http://www.cocoabuilder.com/archive/cocoa/311124-implementing-full-screen-for-10-7-but-app-should-also-run-on-10-6.html
        //We can't use [NSApp mainWindow] - didn't appear to work
        //This seems to though:
        NSArray * allWindows = [NSApp windows];
        if (allWindows.count > 0)
            NSWindow *mainWindow = [allWindows objectAtIndex: 0];
            NSWindowCollectionBehavior behavior = [mainWindow collectionBehavior];
            behavior |= NSWindowCollectionBehaviorFullScreenPrimary;
            [mainWindow setCollectionBehavior:behavior];
        //TODO: Return a boolean instead depending on if we found the main window
        return NULL;

Press Control + Command + F on your keyboard to enter or exit full screen mode.

How to enable login screen which doesn't require a password

Similar Messages

Maybe you are looking for