How to enable TCP Wrappers with SMF services?

I am using a site.xml file to enable/disable services during a Jumpstart configuration. This works great.
However, I can't yet figure out how to configure the various properties of those services, such as enabling TCP Wrappers for a service. I can set the properties of a service and verify that they are set, but a "svccfg extract" does not capture that information.
Is this a short coming of svccfg extract? Or are the properties of a service stored and configured elsewhere?

That will work, as will any path underneath
/var/svc/manifest.Got it working...Exported the inetd configuration, set tcp_wrappers to false, dropped inetd.xml into my jumpstart tree, jumped a box, and tcp_wrappers came up enabled by default for my inetd services!
What is the difference between the /var/svcs/profile and /var/svcs manifest directory? Is profile for enabling/disabling services and manifest for service configuration?
Does /var/svcs/profile/site.xml and /var/svcs/manifest/whatever.xml get read on every system boot? If not, what is the appropriate procedure to "reinitialize" smf if you want to change the existing behaviour by having it reread those files?
Hmm. The defaults get written on the inetd serviceI believe, so exporting that would give you the
fragment
you want.It did, and I was able to accomplish what I needed to do.
Sorry that it's such a slog in the meanwhile.Will there be something before FCS in a couple weeks?
I can definetly see the managability and robustness of SMF. It's just going to take time to learn it, and documentation is needed for that.
Thanks for all your help!

Similar Messages

How to define tcp wrappers for a new service in Solaris 10?

Hi all, I need to setup tcp wrappers for a third-party software product with /etc/hosts.allow.
I installed Trillium software on a new Solaris 10 server. It added this entry to /etc/inetd.conf:
dscserv0_rel1300 stream tcp nowait tsadmin /usr/bin/env env -i HOME=/home/tsadmin LOGNAME=tsadmin /opt/trilv13/TrilliumSoftware/server/metabase/bin/mtb_server
After the install, I ran inetconv and this new SMF service was created:
*# svcs -a|grep dsc*
online 13:22:57 svc:/network/dscserv0_rel1300/tcp:default
Here's the problem: After this, all new connections were denied by default. I had to disable tcp wrappers with this command:
inetadm -m svc:/network/dscserv0_rel1300/tcp:default tcp_wrappers=FALSE
I would prefer to enable tcp wrappers, and put an entry into /etc/hosts.allow, but I can't figure out what service name to put into /etc/hosts.allow. I've read through the man pages but I can't identify the service name to use for this new service, and it won't accept the FMRI or an abbreviation of it either.
How do I identify the service name to put into /etc/hosts.allow?

At OS level, before entering Sql*Plus, do :
$ EDITOR=vi; export EDITOR
$ sqlplus ......
Message was edited by:
Paul M.
Ciao Nicolas :-)

How to register HFM aplication with Shared services

Hi,
Version 11.1.2
I am new to this version and asking help how to register HFM application with shared services.
In ver 9.3.1 we register in config utility.
Regards
Kumar

You should start the EPM system configurator, it is the same concept as earlier versions, just the look and feel is slightly different.
Cheers
John
http://john-goodwin.blogspot.com/

How to register Essbase server with Shared Services?

Hello All,
How to register Essbase server with Shared Services?

Hello All,
How to register Essbase server with Shared Services?

How to get in touch with customer service?

How to get in touch with customer service? Twice I had a chat and I would get an answer in a few days. Never heard a thing! I need an invoice for my book-keeping but I can't download it. It says: get in touch with the customer service. But I chatted for 2 times, tried to phone, They won't answer the phone. Where is the customer service!!!!!!!!!

Hi Regine43b,
Please refer to the following link for help with your monthly invoice: http://helpx.adobe.com/x-productkb/policy-pricing/print-creative-cloud-receipt.html
If in case you still face issues, please contact support @ https://helpx.adobe.com/contact
Regards,
Sheena.

How to enable fnd log in self service page

Hello,
In professional forms, we can enable fnd log using the profile options "FND: Debug Log Enabled" to Yes and "FND: Debug Log Level" to different levels.
Similarly, can we do the same with Self Service page? how and where can i see the log results? Also when i'm running the selfservice page from jDeveloper, is there any possibility to see the entire log?
I need to track why i'm unable to run a page from jdeveloper and i need to track the log.
Thank you all for the help in advance.
kK

Hi,
To Enable to Log for a self service page click on 'Diagnostics' link avaible at the Upper Right corner of the page. Now from the Diagnostic poplist select the 'Show Log On Screen' then select the log level and save.
Now you perform your fucntional steps all the log messages you will be able to see at the bottam of the page.
Regards,
Syed.

How to do a InsertOrUpdate with web services 2.0

I understand that InsertOrUpdate method is just valid for Web Services 1.0.
a) Is there a way to do it with web services 2.0 ? I imagine using a query and then Update or Insert.
b) if we decide to use web services 1.0 would there be any cons ? (besides a possible performance issue as in the documentation)
c) InsertOrUpdate uses the record "user key" for identification. If need to identify using another field, I suppose that the only way is thru query, etc. Any other ideas ?
Txs. for any help.
Antonio

Hello Antonio,
I understand that InsertOrUpdate method is just valid for Web Services 1.0.Correct, the InsertOrUpdate method is not available in WS v2.0.
a) Is there a way to do it with web services 2.0 ? I imagine using a query and then Update or Insert.That is one possibility, however it means that every insert or update would consist of two operations. I would suggest reviewing your requirements and expected use cases for a way to determine whether a record is being inserted or updated within CRMOD. The specific approach would depend on whether how the records to be entered into CRMOD are compiled (i.e. user interaction vs. batch sync component)
b) if we decide to use web services 1.0 would there be any cons ? (besides a possible performance issue as in the documentation)There are some objects that are not supported for WS v1.0 as well as the fact that field coverage is not as complete as the WS v2.0 interface.
c) InsertOrUpdate uses the record "user key" for identification. If need to identify using another field, I suppose that the only way is thru query, etc. Any other ideas ?Only certain fields or sets of fields can be used as a user key. These are described in the WS user guide. You can query on other fields to find a record in CRMOD but a unique value must be provided to identify a record for an update operation.
Thanks,
Sean

How to enable resource sharing with complex AEBS setup

I have a complex AEBS + Netgear network configuration that I am trying to enable resource sharing on. The Netgear router is necessary because it provides excellent per-user parental controls and content filtering that the AEBS lacks. The setup is operational (network connectivity works as expected), but I cannot figure out how to enable cross-network resource visibility and sharing.
Here is the network configuration:
|Vz Fios PPoEE |
|
v
|___
|AEBS|
| __Mac Mini (wireless)
| __AppleTV (wireless)
| __Wii (wireless)
| __MBPC2Duo (wireless)
| __WinXp PC1 (wired)
|
v
|______
|Netgear|
| __WinXP PC2/Printer (wired)
| __WinXp PC3 (wired)
| __iBook (wireless)
| __Vista Laptop1 (wireless)
| __Vista Laptop2 (wireless)
The Mini, AppleTV, Wii and MBPC2Duo all connect wirelessly with the AEBS. The Netgear router is wired to the AEBS. This in turn has 2 wired clients and three wireless clients as illustrated.
The Netgear router receives an IP address assignment from the AEBS (in the 10.0.1.x range) via DHCP and in turn assigns IP addresses (in the 192.168.1.x range) to attached clients via DHCP
The setup is operational and operates flawlessly --network-wise. However, I now need to enable resource sharing as follows:
1) Setup the Mini as the media hub, configured to allow:
a. storage of all iTunes, iPhoto, iMovie and garage band content to an attached external hard drive,
b. sharing of content on the Mini with iTunes on each computer (Macs and Pcs) and the AppleTV
2) Share the printer attached to Windows XP PC2 with all computers (Macs and PCs)
Questions:
1. Is this possible with this network configuration?
2. If so, how would I configure the relevant elements?
3. Is it better to attach the external media storage to the AEBS vs attaching it to the Mini?
Thanks!

Thanks Tesserax. After some digging I was able to find bridge mode config instructions for the Netgear router.
Follow-up question:
Given my desire to centralize media access via the Mac Mini, what is the best way to set up my media storage device (320G HD)?
I see the following options:
A. NAS device via USB 2.0 connection to the AEBS, or
B. Supplemental hard drive on the Mac Mini via USB 2.0 or Firewire.
Thoughts/suggestions?
Thanks!

How to enable Print Preview with the Envy 5530

How to enable Print Preview on the Envy 5530

Hi,
A print preview is not offered by the current HP software as older software versions provided.
A preview is only available if the application you are printing from include a such, it is not provided by the printer driver itself.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Enable rsync server with smf

Hi all !!
I want to install a rsync server witn solaris 10, and can't configure smf to start the server.
I have the old inetd.conf lines:
rsync stream tcp nowait root /usr/bin/rsync rsyncd --daemon
Can someone explain how I can to migrate this line to smf ?
Thanks in advance.
roberto

Put that line in /etc/inetd.conf.
Run 'inetconv'
Now you have a service you can start and stop with 'svcadm'.
Darren

How to enable SOAP compression in web services

Hi, I have created a web services by exposing an EJB using annotations. Trouble now is that the output is an array of Objects which grew to a significant size to cause latency issue. I have saw folks using filters to compress the HTTP response but is unable to find much resources on the web linking up annotated-EJB web services to link up with the filters but most of the examples I see are based on handlers and not EJB-exposed web services, can someone point me to some resources for that type of web services + compression?
Another thing which caught my attention is the use of the <compress-html-template> tag which needs to be in the web.xml file, but since I am using a "generated" web services as per say, I do not have that web.xml file, how then can I use that feature?
Thanks in advance.

Hi Anke,
all tables that have been created in V9.7 with attribute COMPRESS YES will be compressed statically .
db2 " select count(*) , rowcompmode from syscat.tables group by rowcompmode "
After the upgrade to 10.5 all tables created with attribute COMPRESS YES will get rowcompmode='A' but old tables created with V9.7 will stay with rowcompmode='S' .
You can change tables from rowcompmode='S' to rowcompmode='A' via ALTER TABLE . After this all new pages or old pages that are touched will be adaptively compressed. But old pages that are not touched will only be static compressed. To get all pages of an existinbg table adaptive compressed you need to move data. For example with DB6CONV.
Regards
Frank

How to design crystal report with web service data source?

I want to design and run a Crystal Report 2008 against my ADO.NET DataSet from web service method.
I choose New Report, for Data I choose XML, then "Use Web Data Source" hit next, then choose "HTTP WSDL URL" I enter http://localhost/RDWS/Service.asmx?wsdl, hit Next, I leave HTTP username and HTTP password blank. Then I see the Services, Ports and Methods screen. Services: Service, Ports: ServiceSoap, Methods: CustomerOrdersDataSet
When I click Finish, I get Logon Failed, Details, Schema file is invalid. error:Element Schema@htttp://www.w3.or/2001XMLSchemal not found.
How can I get this to work?

The native XML driver is incompatible with ADO.NET DataSet XML. The specific issue is that the driver cannot handle the recursive definition on "Schema" that the .NET DataSet XML uses.
The workaround is to create a .NET class that Web References, invoke the Web Service method for the DataSet, then returns it.
Use the ADO.NET (XML) driver in Crystal Report to consume the .NET data source.
Note - when you deploy your report, ensure you deploy the DLL for the .NET class you've created.
Sincerely,
Ted Ueda

How to manage tcp buffer with array

I am having trouble parsing data from the tcpread buffer. I can parse the data from the buffer I was just wondering if the following is possible...Is there a way to have each tcp packet that is received be put into an array element instead of having the buffer append the in received data onto itself. It would be much easier for me if the buffer was divided in to packets that way I could just parse each packet instead of having to find each packet then parse each packet individually? I was just wondering if there was an example or something, or do I need a vi myself to handle this. I noticed that the TCPREAD vi block has 4 options for the buffer...this is not one of them...but perhaps someone has done something like this before? Thanks for any help.

Unfortunately the project I have has a variable number of connections so it could be one or it could be up to 65535.
I've been thinking of a server-type example for my blog.
I've written a web server in LabVIEW before (1995 or so). Basically you separate the listener from the service functions.
The listener listens for connections and puts CONN IDs into a pool (queue). The pool contains all the connections that are active at the moment, along with some sort of status flag.
A service loop continuously extracts a connection cluster from the pool, handles it according to it's status, and either returns it to the pool, or terminates the connection and removes it from the pool.
The idea is that the server is a sort of state machine which runs through all current connections and gives them some attention.
You could also do it by spawning a number of copies (one for each connection) of a single reentrant VI, but I don't know about the performance of that. If you truly have a thousand connections at once, then you would have a thousand instances of this VI running in parallel.
That's a bit daunting to me, but then I've never tried it. Perhaps someone else could comment on that feasibility. It would seem that the thread-management overhead might be a problem, but I don't know.
Steve Bird
Culverson Software - Elegant software that is a pleasure to use.
Culverson.com
Blog for (mostly LabVIEW) programmers: Tips And Tricks

How to enable editing sites with SharePoint Designer

HI,
when i try edit my web part in SharePoint designer I receive a error:
“Web Site Editing is Disabled. This web site has been configured to disallow editing with SharePoint Designer. Contact your web site administrator for more information.”
I never disable this. When I search for this error, it’s the same thing, how disable editing SharePoint designer… but I want ENABLE.
I try search the line “DisableWebDesignFeatures=wdfopensite” in my Onet.xml files but no exists.
I need edit a file, how? Please explain me, it’s for my work.
thanks
Hernandezz

SharePoint allows you to create custom web parts to help you provide highly customized solutions to your clients/users. The properties of these web parts are added by default but to
further customize the solution, you can also create custom properties. The following example demonstrates how to add a custom dropdown property to a custom webpart.
// Create a Enum for Languages
public enum LanguageByEnum
       English = 0,
       French,
       Spanish
Sharepoint migration 2010
Cheers, Eliza

How to use security certificate with Business service

Hi,
Information:
I need to use a security certificate for connection from Business service to legacy system.
I have created PKI mapper in WebLogic console, deployed keystore on server and Service Key Provider in OSB.
I can see can connect the certificate in OSB console through the Service Key Provider.
I have done Authentication setting in the Business service "HTTP Transport Configuration" as "Client Certificate".
Problem:
Now whenever I try to invoke BS, the username, password and security key provider is asked at the prompt. Should not the BS collect security certificate automatically? Again,
when i put username and password as that of WebLogic sbconsole; the error pops up with following message :
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">
     <env:Header />
     <env:Body>
          <env:Fault>
               <faultcode>env:Server</faultcode>
               <faultstring>Failed to process signature.null</faultstring>
          </env:Fault>
     </env:Body>
</env:Envelope>
If I don't supply username password and certificate at the time of invoking the message pops up as : "The service requires a digital signature, you must specify a service key provider which has a digital signature credential."
I think some mistake is done in the above steps, could anybody please clarify?

The problem was resolved with upgrade to version 10.1.3.4.

How to enable TCP Wrappers with SMF services?

Similar Messages

Maybe you are looking for