How to fade or transition animation of an image?

respected sir/madam,
please make an example for the following question?
how to fade or transition animation of an image?

I assume the question is that you want to show an image, and then smoothly fade to another image.
I've done this by using two ImageView's which are stacked on top of each other (using a Group or StackPane). You then simply play this animation:
  TimeLine fadeAnim = new Timeline(
    new KeyFrame(Duration.ZERO,
      new KeyValue(newBackgroundImageView.opacityProperty(), 0.0),
      new KeyValue(backgroundImageView.opacityProperty(), 1.0)
    new KeyFrame(new Duration(4000),
      new KeyValue(newBackgroundImageView.opacityProperty(), 1.0),
      new KeyValue(backgroundImageView.opacityProperty(), 0.0)
  );Before you start the animation, you set the "new" image to the newBackgroundImageView (which has zero opacity). You then start the animation.
After the animation has finished (using Timeline#setOnFinished), you put the "new" image in the backgroundImageView, set its opacity to 1.0 and you set the newBackgroundImageView opacity back to 0.
By doing this you are back at the beginning state, but now showing the newly faded-in image :)

Similar Messages

  • Speeding up spaces: How to disable the transition animation?

    Is there some way the disable the Spaces transition animation? I would like to change between the different virtual desktop as fast as possible.
    There are some times when it gets quite annoying: when you move to other spaces the screen flickers if there is a big window to be re-drawn.
    Thanks in advance

    This is the boilerplate text often used in connection to networks in general. It is impossible to troubleshoot someone else's network remotely, and that's why it's not supported by Adobe:
    If you are opening files over a network or saving them to a network server, please cease and desist immediately in the event you are currently experiencing problems with one or more files.
    Working across a network in general is not supported by Adobe.
    See: 
    http://kb2.adobe.com/cps/406/kb406793.html
      Copy the CLOSED file from your server to your local hard disk, work on it, save it again to your local hard disk, close it, and copy the closed file back to the server.
        Of course, the fact that Adobe does not support working across a network does not necessarily mean it won't work.  It should.
        Adobe's position is that there are too many variables in a network environment for them to guarantee that everything will work correctly in every network, especially given the fact that if something does not work properly, it's probably the network's fault, and Adobe has no way of troubleshooting your network.
      If you can't work locally, you are on your own, and if something happens, you're on your own. If you must work from a server, make sure your network administrator is a competent professional.

  • How To Fade In a JPG or GIF Image using Inspector Build-In or Action

    Inspector doesn't seem to have any Build-In or Action that allows me to FADE IN an image.
    There only seems to be an Opacity Action that allows a FADE OUT.
    This seems like kind of a software design oversight. Am I missing something in Keynote?

    The Dissolve transition can be used for either/both a fade-in or a fade-out.
    ... but by now you already know that.
    Message was edited by: Brie Fly

  • Using fade/appear transition in spry tabbed panels

    I've implemented the fade/appear transition into a spry
    tabbed panel set up. The effect works in that when one clicks on a
    tab, the content in that panel will "appear" in using a opacity
    transition.
    The problem I am encountering is a pre-load of the content..
    almost a flicker at 100% opacity... and then the transition from 0%
    to 100% resumes. This flicker effect or visible pre-load of the
    content really takes away from the effect of the transition.
    Does anyone know how to solve this or correct my set up?
    I'm using the following...
    <li class="TabbedPanelsTab"
    onclick="MM_effectAppearFade('fade-guestrooms', 1000, 0, 100,
    false)" tabindex="0" onfocus="this.blur()">GUEST
    ROOMS</li>

    Yes this was a tough one to pull off in Spry. I have worked up a solution that fades between the panels. Please have a look at the following post:
    http://blog.infrontweb.com/ajax/spry/spry-tabbed-panel-fade-transition/
    Good Luck

  • Is there a simple fade in/fade out transition?

    In Final Cut X, I don't see a simple fade in or fade out transition. Am I missing it? I've recreated it using Fade to Color (black) then adjusting the audio. But seems more complicated than it needs to be.

    A very simple way (with full control) is:
    Select the clip in the storyline, press Ctrl+V to open up a Video Animation box above the clip.
    Click the dark rectangle to the right of the Opacity bar to enlarge it.
    Near the top of the box is a thin black opacity control line.
    Click the right end of the line, and drag to the left to create a fade-out.
    (Click the left end and drag to the right to fade-in).
    Andy

  • Audio distorted during fade in/fade out transitions

    I'm using iMovie HD to edit an MP4 file. I've put fade in/fade out transitions at the beginning and end of the movie, but I notice that it either garbles the audio during these transitions or adds a loud clicking noise in place of the audio that should be there (i.e., the original audio fading in or out.)
    Has anyone experienced this? Any idea how to work around the problem?
    Thanks.

    Maybe it is this?
    http://docs.info.apple.com/article.html?artnum=107945
    Sue

  • How to fade out button as menu fades?

    I've searched the forums and manual to no avail.
    I created a menu that fades to black before jumping to the loop point. Is it possible to fade out the highlighted button as my menu fades to black and jumps to the loop point? Otherwise, the button remains highlighted on screen as the menu fades to black.
    I understand how to fade in a button by using Final Cut or Motion and an overlay file, but this of course wouldn't work when fading out a button since the button remains on screen while the video "button" fades out.
    Thanks in advance for any advice.

    If you add a transition from the menu to the track, such as a dissolve, it should not carry over the highlights - not sure if the button itself is on the highlights. But lets say you have an arrow next to the text that highlights that should not be seen in the transition portion, but it will be abrupt. Also if there is motion after the loop point you will not know when the button is pressed, if it is effectively a still then the fades are smoother.

  • How to fade a title in and out?

    Hi,
    I don't find how to fade a title superposing a clip in and out.
    Thanks for all hints
    Alooha

    Troy,
    I understand what your saying.
    First of all, what your doing a called a video effect not a transition. A transition is applied between two clips. The only "Swirl" in PP is a transition.
    What you are refering to is the alpha key and, in a product like Boris Red, you must set the alpha key "on" in order to make the black "alpha" area transparent.
    You must be using some third party plugin or are importing an image where you think the black area is an alpha channel but is not? Because i've only had problems with the black area (alpha channel) when using third party plugins like Boris FX or RED. With Boris, the alpha channel only works with effects not transitions. So if you have a scaled Boris transition between two clips or images overlayed above some background in PP, the background will not show through. If you've imported an image into PP with black areas that you want to be transparent, then you have to apply a key to remove the black or use an image format like ".PNG" - it includes the alpha channel.
    If you have a PP titler page or clip and are using just PP effects and transitions, there should be no alpha channel problem no matter how you scale or manipulate the object, even if they are all in the same sequence and on top of each other. The only time you will encounter this problem is when you import a clip or image with black areas, as opposed to an alpha channel, that you want to make transparent.
    So... If this a problem using third party effects plugins then i offer my apologise since they don't always function properly with respect to alpha channels. Otherwise, for an experienced editor, you need to read up on alpha channels and keying. :)
    regards,

  • I have created a 468x60 animated banner in Edge Animate. How do I save the animated image to my desktop? (not in html code)

    I have created a 468x60 animated banner in Edge Animate. How do I save the animated image to my desktop? (not in html code)

    Hi,
    This feature is not available in Adobe Edge animate. You can not export as image from Edge animate.
    Publish options available in edge describe here
    Edge Animate Help | Publish your content
    Regards,
    Devendra

  • How do you put edge animation in Magento?

    How do  you put edge animation in Magento please?

    Provide the name of the program you are using so a Moderator may move this message to the correct program forum
    This Cloud forum is not about help with program problems... a program would be Photoshop or Lighroom or Muse or ???

  • How do I add an animated gif to mail?

    How do I add an animated gif to mail and still have the animation active

    Dj
    I found this complete mail tutorial. Hope this will help you with unread messages.
    Regards,
    Joseph

  • How  to fade groups of images or multiple images at the same time?

    I am creating a flash infographic, and want to fade images I have imported from Illustrator that are grouped. I would like to know how  to fade these groups and multiple images at the same time.
    Thanks!

    Use TweenMax for this.
    the syntax is like this:
    var arrayOfDisplayObjects:Array = new Array();
    //with arrayOfDisplayObjects.push(DisplayObject)
    //you can put any DisplayObject in the Array and when you want to fade them call this
    TweenMax.allTo(arrayOfDisplayObjects,1, { autoAlpha:0} );
    //to fade them in 1 second to alpha=0 and when reaching the zero make them invisible (to save processing power)

  • Is there a way to speed up or disable the Spaces transition animation in Mountain Lion?

    The Spaces transition animation seems to have gotten slower since upgrading from Lion to Mountain Lion. You could disable it with a terminal command up through Lion, but that doesn't work anymore in Mountain Lion. I'm using Ctrl+Arrows to switch between Spaces.

    I''m finally seeing what people are saying
    I've heard quickly gesturing for a space is a solution. Mission control is also fast with switching.
    Although I haven't really timed myself doing that.
    You can send feedback to apple saying you would like it to be faster http://www.apple.com/feedback/macosx.html (make sure you state you're on Mountain Lion)

  • How can I convert my animation into a working movie clip that can be used with a new scene?

    Hello all,
    First and foremost, I AM A TOTAL FLASH NOOB. I want to preface this and make it incredibly clear how new this all is to me. I LITERALLY started using flash this morning; that is precisely how new I am.
    With that being said I am going to do my best to explain what I'd like to do.
    I have created an animation of a spider moving its legs back and forth. I want to be able to combine all of the layers into 1 simple animation that can be imported into new flash scenes with the animation exactly how it stands. I have figured out how to convert the whole animation into a symbol AND I have figured out how to import the movie clip from the library. However, herein lies my problem. When I open a new flash scene and import my animation, I play it and it does nothing at all. It's just the static image of the spider I created with no movement.
    I've spent the last couple hours trying to figure out (and doing my own research) what I have done or didn't do to get to this point. I'd be willing to bet I am just going about the entire process incorrectly and I'm simple overlooking a basic facet of the program.
    Any insight to fix my ignorance is greatly appreciated.
    (P.S. Hell, I don't even know if I am using the correct terminology so for all I know I am confusing every person who has taken the time to look at my question. If I am using incorrect terminology please correct me to avoid future hang ups. Thank you.)

    Ned! This totally worked! Thank you! I knew there was a tiny piece of this whole thing that was preventing me from making everything work. Unfortunately as my luck would have it, although I have the movieclip working the spritesheet converter I'm using now no longer recognizes the movie clip. The converter says there are 7 frames in the animation, but doesn't display any working sprites. Just a blank sheet. Frustrating to say the least.
    I'm just going to throw everything out on the table here:
    This is the video tutorial i'm using to convert my animation into a spritesheet. I've done the steps exactly as directly up until the point I actually click "Begin Conversion." When begin conversion is selected, it shows the movieclip exists on the bottom left underneath "list of movieclips" but doesn't actually show any individual sprites.
    Here's the simple sprite converter I am using.
    The irony of this whole situation is that you have successfully helped me make a working movieclip (which was the important piece), but the converter no longer recognizes it. Whereas before, it would at least show the image on the 1 frame of animation it had.
    If you wanted to to take a stab at it and see if you can successfully get it to work I'd be appreciative. If not, I totally understand as you have already been incredibly helpful and have my eternal gratitude for getting me this far. These animation programs can be quite overwhelming when they so vastly differ from one another. Don't even get me started no Anime' Studio Pro.

  • How do I fix my animation presets for text that won't load? It seems to get locked in loop and I am forced close Adobe Bridge.

    How do I fix my animation presets for text that won't load? It seems to get locked in a loop when I click on one and I am forced to "fore close" Adobe bridge which After Effects uses to locate the presets. Any help would be appreciated. Thanks.

    What is your exact workflow? The proper procedure is to select your text layer in AE, find the text preset you want to use, then drag or double click that preset to apply it to your project.
    It also helps  if we know your version of AE and OS down to the decimal point. You didn't give us much to go on.

Maybe you are looking for