How to fetch a resource capacity ?

Calendar SDK 10.1.2
Linux RH3 U4
Using java how can i obtain the resource capacity,
for example number of seats for a conference room

That functionality is not available through the calendar sdk.
Jean-Philippe

Similar Messages

  • IDM : How to get the Resource name in Exclude Rule during Reconciliation?

    Hi
    Problem Statement => How to get the Resource name in Exclude Rule during Reconciliation.
    Problem Description => Apparently, we use exclude rule for not consider some account during reconciliation.
    I need the resource name in exculde rule during reconciliation. I tried with getResources() method which is an inbuilt method.But it gives all the resources are aviablable in the repository (IDM). I need only the current reconcilied resource name instead of fetching all the resouce.
    Can any one please help how to get the resource name in exclude rule during reconciliation?
    Thanks in advance for you help.
    Thanks,
    Chellappan

    Hi,
    Thanks for your reply.
    I have 50 resouces and these resouces using the same kind of exclude rules. In the exclude rule, i am using resource name to do some work. If i get the resouce name in exclude rule, then i can use the same exculde rule for 50 resources. This will minimise the rule count from 50 to 1. For that, i need resouce name.
    Thanks,
    Chellappan Sampath.

  • How to create Alternative resources with constraints?

    Dear Gurus,
             i have an scenario where i have more than one resource giving same product as output having different capacities.
    This resources capacity are utilised by  more than one product and each reource has it own priority to a particular product.
    example:
    i have 4 products viz, A,B,C,D
    and resources viz, RA, RB,RC,RD. the capacity is in nos of items per day.
    lets say Resource capacities are
    RA=150 nos ( can produce A,B,D)-priority to A than to B than D
    RB=200 nos ( can produce A,D)-priority to D than A
    RC=100 nos (can produce C, D)- priority is given to C, remaining cpacity can be used by product D)
    RD=200 nos (can produce B,C,D)-pririty to B than D than C
          how can i crate this scenario in APO..
    regards
    Kiran

    Hi Kiran,
    First of all you need to classify the resources RA, RB, RC and RD suitably so that when you CIF production versions (for the products) from ERP to APO, in the PPM appropriate alternate resources are created under modes.
    Then in each PPM you need to assign the priority for the resource (other way round from what you mentioned as your business requirement).
    So in the PPM for Product A the primary resource/mode would be RA but then alternate modes RB (suitable lower priority).
    Likewise in PPM for product B the primary resource would be RB and RD is alternate mode with lower priority.
    For Product C PPM - primary resource is RC with alternate resource RD having lower priority.
    For Product D it becomes complex - primary resource is RD but then probaly RC >> RB >> RA would be the order for alternate mode priority.
    Hope this helps.
    Somnath

  • Fetch a resource attribute using Last name

    Hi All,
    I need to fetch a resource attribute 'employeeID' from AD, all I know is only Last Name (I don't know the accountId). How can I acheive this?
    Is it possible through EXPRESS or do I need to write a java program.
    Please share your ideas.
    Thanks in advance

    It is possible (with XPRESS) but the search criteria of Last Name will result in lots of erroneous matches. If at all possible, find additional or alternative search criteria to narrow down the field.
    Here's some example code for retrieving results from an Active Directory resource. It was written to be used in the Form context (changes would be required if you were executing from a Workflow context).
                  <defvar name='results'>
                    <invoke name='getResourceObjects' class='com.waveset.ui.FormUtil'>
                      <ref>:display.session</ref>
                      <s>person</s>
                      <s>Active Directory Resource Adapter</s>
                      <map>
                        <s>searchContext</s>
                        <ref>baseDN</ref>
                        <s>searchAttrsToGet</s>
                        <List>
                          <String>cn</String>
                        </List>
                        <s>searchFilter</s>
                        <concat>
                          <s>(sn=</s>
                          <ref>lastnameValue</ref>
                          <s>)</s>
                        </concat>
                        <s>searchScope</s>
                        <s>oneLevel</s>
                      </map>
                    </invoke>
                  </defvar>baseDN specifies where in the AD tree to start searching (e.g. "cn=Users,dc=Acme,dc=com")
    lastnameValue is the lastname you're searching on (e.g. "Smith")
    results will be a List of the cn attributes that came back from the search (specified in the List under searchAttrsToGet). You need to put logic around the results to handle the List appropriately.
    Use standard LDAP-style search filters in the searchFilter section if you need to add additional qualifiers.
    Jason

  • How to fetch file from app. server without complete filename?

    Hi,
    In my report I have to read data from txt file on application server.
    My file name on App. server conatain system id and date and time stam.
    my file path :- /User/IDD/S10009112007101525
    here,'User'  is dirctory
            'IDD' is folder in directory
            'S100' is system id
             '09112007' is date
             '101525'  is time in hour,miniute,second format.
    From my program I can only pass directory , Folder name,System Id,Date only. I don't have time value in my program.
    So please tell me how to fetch files without having time stamp value from app. server.
    Plz send me exact code.It's urgent.
    Message was edited by:
            Manisha Kadam
    Title was edited by:
            Alvaro Tejada Galindo

    Do you want to return the file to the user on click of button or something?
    Then, use web_show_document with http link which you are speaking about.
    Else download the file to client using Webutil.

  • How to fetch year till date value for earning for current ,last and year

    hi,
    how to fetch year till date value for earning for current ,last and year before that from payroll result
    plz reply soon,
    pratyush

    Dear Pratyush,
    Pick this from CRT.
    Use LDB PNPCE & Fire event GET PAYROLL &
    then you can pick from CRT.
    Hope this helps.
    Kindly reward in case useful.
    Regards & Thanks,
    Darshan Mulmule

  • Resource capacity utilization report

    Hi,
    Is there any standard report for Resource capacity utilization after SNP run.
    Any standard extractor/data source is available to build the report?
    Regards,
    Krunal

    Hi Krunal,
    1) The report /N/sapapo/cdps_rept should be sufficient...use the selection restriction to 'restrict ' by Rosurce,Time period--In the output ofthe report,yuou would see 'bucket consumption',relatively on the Right side..
    2) I would urge you to read the note:1296446 too
    Thanks and Regards
    Suresh

  • How to fetch accounting document number from known material document number

    Hi,
    Using MIGO transaction, by giving mblnr(material document number) as input, I get accounting document number by clicking FI document.I have to add this accounting document number in my report for corresponding known mblnr(material document number) values.
    My question is how to fetch the accounting document number present in MIGO to add in my report program.
    I used the xblnr(Reference Document Number) which is present both in mkpf and bkpf tables to fetch values.
    I extracted xblnr values with known mblnr values from mkpf (Header: Material Document table).
    and then extracted belnr(accounting document number) from bkpf (Accounting Document Header table) by using xblnr values.
    But the query is running for a long time.
    Is there any other method  to extract the values in a simpler way.
    Kindly advise.
    Thanks and Regards,
    Sanjeev

    I had the values of xblnr and some other fields such as mblnr, budat etc in wi_item table.
    I created a new internal table i_xblnr and got down those values.
    And then created a new internal table i_belnr and tried to get values of belnr in it.
    The code I wrote is given below:
    IF not wi_item[] is initial.
    loop at wi_item.
       at new xblnr.
        ws_xblnr-xblnr = wi_item-xblnr.
         append ws_xblnr to i_xblnr.
       endat.
    endloop.
      select belnr xblnr from bkpf into table i_belnr for all entries in i_xblnr where xblnr = i_xblnr-xblnr.
    ENDIF.
    Kindly look after it.Thank you.
    Regards,
    Sanjeev

  • How to fetch NO DATA FOUND exception in Ref Cursor.

    In my procedure ref cursor is out parameter with returns dataset. in my proceudre
    its like...
    OPEN pPymtCur FOR
    select.....
    when I call this procedure from report to get dataset it causes NO DATA FOUND exception.
    How to fetch this exception in my oracle procedure so I can get some other data.
    Any Idea to do this?
    Edited by: Meghna on 17-Jun-2009 22:28

    Mass25 wrote:
    Correct me if I am wrong.
    So if I do something as follows in my stored proc, I do not have to check for NO_DATA_FOUND?
    OPEN my_CuRSR FOR
          SELECT DISTINCT blah blah blahmy_cursr is what I am returning as OUT param in my SP.Correct. At the point you open the cursor, oracle has not attempted any 'fetch' against the data so it won't know if there is any data or no data. that only occurs when a fetch is attempted.
    Take a read of this:
    [PL/SQL 101 : Understanding Ref Cursors|http://forums.oracle.com/forums/thread.jspa?threadID=886365&tstart=0]

  • Opening Stock+Purchase-Closing stok ,how to fetch in P&L Statement

    HI! All,
    In Schedule 15 in India showing the opening Stock+Purchases-Closing Stock .In FSV or in report painter how to fetch these figure  to prepair in the P&L Statement.
    Thanks & Regards
    Archana

    Hi,
    You need to use FSI3. The opening balance will be the last month's as off. Create a formula for the Purchases where it will be the stock balance as of the current period less the balance in previous period.

  • How to fetch data from different sources into one source (like into Ztable)

    hi friends,
    As per our client requirements they want to develope an Inventory and an Ontime delivery report in BO on top of Oracle database.
    Situation is some thing like they have ECC 6.0.and they want to collect all inventory and ontime delivery data at one place.According to me that could be one Ztable in which we can gather all data.Apart from that they are going to use Data Integrator in which they can directly fetch the data from R/3 system(They dont want to have BI system) and put all data in Oracle DB.On top of ORacle BO person can develop BO reports.
    My question is how to fetch all data at one place and what are the tables going to be use.
    kindly help me out as its very important project.
    Thanks
    Abhishek

    The following is my standard reply to those who need to get old data from a backup in one account and add it to another account.  The method described here may be applied to your case.  It would be a bit of a long process, though.
    When connected to the account you want to GET data from, Go to Settings>iCloud and turn all data that is syncing with iCloud (contacts, calendars, etc.) to Off. 
    When prompted choose to keep the data on the iPhone. 
    After everything is turned off, scroll to the bottom and tap Delete Account.  Next, set up a new iCloud account using a different Apple ID and turn iCloud data syncing for contacts, etc. back to On.  When prompted, choose Merge.  This will upload the data to this new account.
    Note that this only affects the "Apple data" like contacts, calendars, reminders, etc.  Many third party apps also use iCloud to store data files there.  These files may be lost in the process, unless the apps also keep the data locally on the device.
    NOTE:  Photos in the photo stream (if you use it) will not transfer to the new account.  It is advised that you save the photos to a computer before performing the account switch. 

  • How to delete/deploy resources in ES4 workbench?

    In the previous version of the workbench, I could deploy resources (PDF, flash files) into the workbench by drag-and-droping the file from the Windows Explorer into the workbench resource's tab. I could also delete the resource files by right clicking on the item and selecting 'delete' in the resource tab of the workbench.
    In the ES4 workbench, I could no longer do the above. Drag-and-drop does nothing and the right click context menu only shows Relationships, Access Control, History. How to delete/deploy resources in ES4 workbench?

    Hi,
    Did you find how to deploy the xdp files to resources in ES4 workbench? I am looking for deploy the xdp files to ES4 server please help me if you find the solution. Thank you.

  • How to fetch some certain records at a time

    Hi everyone,
    I dont know how to fetch some records at a time,
    for some reason,there is not enouht memory.so I cant
    fethch all the records at a time.
    example, every time I only want to fetch 10
    records. Does anyone know that?
    thanks
    Krussi

    I think you may be getting setFetchSize(int) and setMaxRows(int) confused. I may have added to the confusion with my breaking out of the loop comment.
    setFetchSize(int) gives the driver a hint as to how many rows it should store in memory at a time internally, ie. within the driver. It has no real effect on how you write your program at all. Its only purpose is to limit memory usage by the driver. To limit the rows returned, use setMaxRows.
    For example, assume a result set has 20 rows and you use:
    rs.setFetchSize(5);
    while (rs.next()) {
       System.out.println("Rows: " + (++count));
    }  You still get a count from 1 to 20. However, internally the driver is only holding in memory 5 records at a time, after the 5 returned it will discard those and get the next 5. So instead of holding 20 rows, its only holding 5 at a time. If you change rs.setFetchSize(5) to rs.setMaxRows(5) you will only get a count from 1 to 5, the rest are silently discared and rs.next() returns false.
    Check your documentation to see if your driver supports the method. I believe many drivers don't. If not, I believe there is no way around multiple queries. Even if there is no rowid, as long as you order your queries you should be able to start again where you left off.
    Disclaimer: Both drivers I commonly use do not implement setFetchSize(int). Someone let me know if I've fudged something here.
    Good Luck

  • How to fetch Error message

    Hi folks,
    I am new to c/c++.
    And i am finding it difficult to figure it out ..............
    char* APIParser::parseDocument(const char *xmlInput) {
              XMLParser parser;
              const char *doc;
              uword ecode;
              doc = xmlInput;
              if(doc == NULL)
    //Return XML output
                   return getDefaultXMLOutput(-1, 0, "XML input document is null");
              if (ecode = parser.xmlinit()) {
                   cout << "Failed to initialize XML parser, error " << ecode;
                   //return ecode;
                   return getDefaultXMLOutput(-1, 0, "Failed to initialize XML parser");
              if (ecode = parser.xmlparseBuffer((oratext *) doc, strlen(xmlInput), (oratext *) 0,
                   XML_FLAG_DISCARD_WHITESPACE)) {
                   cout << "Parse failed, error " << ecode << "\n";
                   //          return 3;
                   return getDefaultXMLOutput(-1, 0, "Parse failed");
              if (ecode = schema.initialize(&parser))     {
                   cout << "Failed, code " << ecode << "!\n";
                   //return 4;
                   return getDefaultXMLOutput(-1, 0, "Error in initialize Schema");
              root = parser.getDocumentElement();
              if (ecode = schema.validate(root, NULL )){
                   cout << "Validation failed, error " << ecode << "\n";
                   ub4* ub4;
                   unsigned char** path;
                   int i=0;
                   boolean value;
                   while((value = parser.xmlwhere(ub4, path, i++))){
                        cout<<ub4<<endl;
                        cout<<ub4<<path;
                   cout<<value;
                   schema.terminate();
                   //return 5;
                   return getDefaultXMLOutput(-1, 0, "Validation failed");
              return "";
    Where i am passing xmlInput which is a char*.
    Things work fine.
    I need to send back exact error message to client to debug the messages.
    How to fetch the messages, line number etc.
    By seing docs i wont be able to figure it out.
    Can any one send piece of code to fetch the error messages.

    If you access the FacesContext you find a method called
    getMessages()
    Return an Iterator over the FacesMessages that have been queued, whether or not they are associated with any specific client identifier.

  • How to fetch data from Mysql with SSL.

    I am using jdk1.5 and mysql 5.0.
    How to fetch data from Mysql with SSL
    I am using url = jdbc:mysql://localhost/database?useSSL=true&requireSSL=true.
    It shows error. how to fetch

    I have created certificate in mysql and checked in mysql.
    mysql>\s
    SSL: Cipher in use is DHE-RSA-AES256-SHA
    but through ssl how to fetch data in java.

Maybe you are looking for