How to fetch components when application loads the components DYNAMICALLY?

In any of java application or applet, I am able to fetch the components using getComponents() or by getContentPane() methods which returns array of components when the application gets launched.
But when the components is launched dynamically by the application/applet, I am able to get the only the containers & not the components....
I also kept my application Tracer to sleep to getComponents() for 5-10 sec to allow dynamic loading of any application,still i am not able to fetch the components.
Could anyone sort out this.

A Container class is simply an extension of the Component class, perhaps what you got is exactly what you were looking for (i.e., the application/applet may have created the components via the Container class).
:o)
V.V.

Similar Messages

  • I just bought a Macbook Air and a usb super dive.  How do I install MS Office 2003 on it?  It won't launch the install when I load the disk in the superdrive.

    I just bought a Macbook Air and a usb super dive.  How do I install MS Office 2003 on it?  It won't launch the install when I load the disk in the superdrive.

    A 2003 MS office sounds like a Windows version.  A 2004 MS Office that was Mac compatible can not be run natively on a new MBA since the Lions do not run PPC applications.  You will have to get a newer edition of MS Office that is compatible with your new MBA.
    Ciao.

  • PC went south. Geeks brought it back. PS elements and premier 11 can't start. Error msg sez configuration incorrect needs to be reinstalled. When I load the disk I get a blank screen. Try to uninstall and can't find apps i control panel. How can I get the

    PC went south. Geeks brought it back. PS elements and premier 11 can't start. Error msg sez configuration incorrect needs to be reinstalled. When I load the disk I get a blank screen. Try to uninstall and can't find apps i control panel. How can I get the apps back?

    adobeamatuer
    Thanks for the reply.
    Although the security of Windows XP SP3 32 bit is compromised by Microsoft no longer supporting XP, if Windows XP was restored as claimed, you should still be able to install/uninstall Premiere Elements versions of it that you did before the Microsoft support removal.
    I think a revisit to the Geeks would be in order. It may be that they could not restore Windows XP because of the Microsoft non support. I would take along the Premiere Elements installation disks so that you do not leave there without actually seeing Premiere Elements (or a non Adobe program) running on your restored Windows XP. What was the other software that you tried to use that did not work?
    Please update us on your progress when you get a chance.
    Best wishes
    Thanks.
    ATR
    Add On...spelling correct 12 03 2014.

  • When i try to submit an application with Application Loader, the wizard is blocked on "Send API itunes connect usage, waiting for response". Any idea ?

    When i try to submit an application with Application Loader, the wizard is blocked on "Send API itunes connect usage, waiting for response". Any idea ?

    Thank you, Vincent! It's still down for me, but at least I know someone had the same issue. Hoping it's going to work over here soon
    Best!

  • First row of table is displayed as selected always when application loads.

    Hi..
    I have a table with few rows in it.When the application loads the first row of table is displayed as selected always.I don't want any of the rows to be displayed as selected.
    How can I prevent this ?
    My jdev version 11.1.1.5.0
    Edited by: Lovin_JV_941794 on Mar 12, 2013 2:13 AM

    Hi,
    can you remove the attribute
    selectedRowKeys="#{bindings.XXXX.collectionModel.selectedRow}"This would ensure that there are no selected rows persisted. you can also paste the jspx code also for better answer.
    ~Abhijit

  • How to open List when Page loads in SharePoint Hosted App?

    I  want to create an app same like InstantPracticeManager by InstantQuick.
    Now I want to know that in a SharePoint Hosted App How can I show the Whole List in a page. 
    Here I have added one image:
    Here there is one list and there are 4 views of that list.
    Now the App will be like when I load the page It will show like the image above. Now how can we show the list like this in sharepoint hosted app?
    I want the same scenario which is shown in the following blogs:
    http://sp2013.blogspot.in/2012/08/use-list-view-in-sharepoint-2013-apps.html
    and
    http://www.sharepointnutsandbolts.com/2013/08/working-with-web-parts-within.html
    where they add a list to an app
    Can any one suggest me the idea? I am bit confused.
    thanks in advance.

    Hi,
    According to your post, my understanding is that you want to show the different list view in a page in SharePoint Hosted App.
    We can use jQuery and cross-domain library to achieve it.
    The following articles for your reference:
    Adding a Tabbed View to A Web Part Page Using jQueryUI
    http://sympmarc.com/2011/11/09/adding-a-tabbed-view-to-a-web-part-page-using-jqueryui/
    How to: Access SharePoint 2013 data from apps using the cross-domain library
    http://msdn.microsoft.com/en-us/library/office/fp179927(v=office.15).aspx
    SharePoint 2013: Get list items by using the cross-domain library (JSOM)
    http://code.msdn.microsoft.com/office/SharePoint-2013-Get-items-d48150ae/view/SourceCode#content
    Thanks,
    Dennis Guo
    TechNet Community Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Dennis Guo
    TechNet Community Support

  • Best Practice for setting bind variable when application loads

    I am using JDeveloper 11.1.2.3.
    When my application loads, the first unbounded page has a table populated by a named query.
    I would like to set the parameter used by the named query when the page loads, to populate the initial data that is displayed.
    What is the best practice for a solution to this issue?

    user6003393 wrote:
    I am using JDeveloper 11.1.2.3.
    When my application loads, the first unbounded page has a table populated by a named query.
    I would like to set the parameter used by the named query when the page loads, to populate the initial data that is displayed.
    What is the best practice for a solution to this issue?Hi,
    You can set the bind variable on VO by overriding prepareSession() method in Application Module check this http://docs.oracle.com/cd/E37975_01/web.111240/e16182/bcservices.htm#sthref357
    Setting bind variable on runtime http://docs.oracle.com/cd/E37975_01/web.111240/e16182/bcquerying.htm#CHDECJHD
    Zeeshan

  • How do I change which application is the (default) for a given file type?

    For .pdf files, I have set the application behaviour to "Always Ask", because sometimes I want to open the pdf, sometimes I want to save it. So far so good.
    Now, when I want to open the .pdf, I have added an application to the dropdown list, so now I have "Adobe Reader 9 (default)" and "okular".
    The problem is this: I *never* open using Adobe Reader. I always want to use okular, but Adobe Reader always appears first on the list, as it is the 'default'. This means I always have to click on the dropdown and select "okular", i.e. an extra step every time I want to open a pdf.
    How do I change which application is the default?

    Yes, I know that. That was the first sentence of my question, but it is not the problem I have.
    I want to change which application is the (default) for a given file type, and this cannot be done from the settings.

  • I have a new Linksys router.  When I load the accompanying CD it informs me that it supports OS 10.5.8 or later, OS 10.6.1 or later, and OS 10.7 or later.  I am running 10.9.2, which apparently isn't supported by this Router.  Any suggestions?

    I have a new Linksys router.  When I load the accompanying CD it informs me that it supports OS 10.5.8 or later, OS 10.6.1 or later, and OS 10.7 or later.  I am running 10.9.2, which apparently isn't supported by this Router.  Any suggestions?

    No they should be agnostic about what is behind them, but as to support for IP6, or whether any computers or tablets can use AC... and hasn't Apple's own units sometimes stop being supported with new Mac and new versions of OS X? seems so.
    I said above, why would anyone install any kind of software to use a router? although Netgear's GEnie is or was installed on my systems that adds a nice way to log in and manage the router, so I have to take that back a notch.
    Support for modems and ISPs is a concern, my modem is not certified fully with DOCSIS 3.0 or  FIOS.
    Look around and you can find routers having trouble with some network services like Airplay, printing and scanning, the software bundled with router.
    However, ethernet chips, and the driver, can be a factor. Problems with Intel networking chip and high bandwidth streaming and not being able to handle the load when used by wifi euipment like notebooks and other devices.
    I have only seen the LARGE number of complaints on MacBook forums about wifi issues to suspect something is wrong but not sure what. And those are people that depend on wifi I assume, though some could use their Thunderbolt equipped Mac to use ethernet to get around the problems. And I am seeing the same thing with some Windows users and maybe they all have common Intel chips???
    MacBook Pro constantly losing wireless connectivity
    I use Windows 8.1 primarily. I also don't know enough or as much to know "Why is the sky blue" either.
    Just pass along this example:
    If you're setting up a new PC for the first time, check if your router is fully compatible with Windows. Because of the new networking features in Windows (8.1), some older network routers aren't fully compatible and can cause problems. For a list of routers that are compatible with Windows 8.1 and Windows RT 8.1, go to the Windows Compatibility Center.
    Anyone remember when 10.4.0 had so many issues with LAN that it could not be used, work on fix was going on and wasn't complete until 10.4.2/4.3 (and first time we got a new full 10.4.3 DVD because customers needed a reliable system.

  • How can I find when I loaded Maverick? I want to uninstall.

    How can I find when I loaded Maverick?  I want to uninstall it, but I want to go back to before I installed it for
    Time Machine.

    No need to multiple post. See your other thread on this Topic...
    https://discussions.apple.com/message/24544578#24544578

  • I'll ask this again.  I'm running Yosemite, LR 4.4 everything was running fine and I'm not sure if this is connected but when I loaded the last security update from Apple I started getting the "no content" box when I tried to publish to LR (Facebook OK),

    I'll ask this again.  I'm running Yosemite, LR 4.4 everything was running fine and I'm not sure if this is connected but when I loaded the last security update from Apple I started getting the "no content" box when I tried to publish to Flickr (Facebook OK), now I can't get it to authorize, I loaded 3rd party JR plug in and still get can't authorize.  Can anybody help?  Basically LR is useless, it has been nothing but problems.

    It would probably be better to continue your previous thread on the same question than to start a new one.

  • How to fetch only WebI reports from the repository

    How to fetch only WebI reports from the repository, where in we have Deski reports also in the repository.. any macro??

    here is the query to fetch only webi reports:
    Open Administration Launchpad (.Net / Java) from:
    Start >> All Programs >> BusinessObjects XI Release 2 >> BusinessObjects Enterprise >
    Click on the 'Query Builder' under 'Administration Tools' on the left pane.
    Logon to Query Builder using Enterprise Administrator credentials.
    Run the following query for Web Intelligence Reports:
    SELECT SI_ID, SI_NAME, SI_OWNER FROM CI_INFOOBJECTS WHERE SI_KIND='WEBI'
    Thanks,
    Srikanth.

  • HT6154 I bought iCloud storage a few months ago and now I want to buy some more, how do I know when I purchased the first one?

    I bought iCloud storage a few months ago and now I want to buy some more, how do I know when I purchased the first one?

    Read here:
    http://support.apple.com/kb/HT4874
    What happens is your existing plan gets canceled, & you're charged a pro-rated amount.

  • I have followed every forum's direction and continue to get an error 100 when I load the adobe installer assistant and try to sign in to complete the download of Adobe Pro XI trial.

    I have followed every forum's direction and continue to get an error 100 when I load the adobe installer assistant and try to sign in to complete the download of Adobe Pro XI trial.

    Hi Stacy ,
    Please refer to the following link to get details and solutions about Adobe Download Assistant .Please see if that fixes the issue.
    https://helpx.adobe.com/creative-suite/kb/troubleshoot-download-assistant.html
    Regards
    Sukrit Dhingra

  • DIM IDu0092s are polluted only when we load the Master data and SIDu0092s

    DIM ID’s are polluted only when we load the Master data and SID’s are polluted only when load the retraction data. System automatically performs the reconciliation of DIM and SID’s  when we delete the transaction and master data.
    a.     True
    b.     False

    Hi,
    You can use the mapping section of the transformation file for this purpose. It should be something like:
    *COL(5) + *Str(_) + *COL(1)
    I am considering that the 5th column of your file is the property. The 1st column is the ID.
    Please take a look at the below link for more information:
    http://help.sap.com/saphelp_bpc75_nw/helpdata/en/5d/9a3fba600e4de29e2d165644d67bd1/content.htm
    Hope this helps.

Maybe you are looking for

  • The PROBLEM is FIREFOX. It puts in a www when I type the address. There is NO WWW IN THIS ADDRESS.

    after the update firefox will not go any web addresses that do not have www in it. I cannot post the url because it is my work, my job.

  • Attach excel - Purchase Order - ME23N

    Hi guys I want to attach an excel file for a purchase order that exist. Can i use BAPI_PO_CHANGE for doing it or other method? Best Regards

  • Can't grant privilege on column to user via role?

    Hi: From what I read in the docs I should be able to create a role that has UPDATE privs on a column of a table, and then grant that role to a user, who should be able to update the column of the table. I get "insufficient privileges" when I try that

  • Regardingtest configuration issuse

    when i test the configuration test , i am getting this error. Runtime exception occurred during application mapping com/sap/xi/tf/_MM_RAS_; com.sap.aii.utilxi.misc.api.BaseRuntimeException:Premature end of file. M.S

  • Help: Additiional Material Type

    Hi MM Functional, I'm an abapper and we don't have functional to consult with. Here's my client's requirement. Current scenario: Item category TAN is assigned to any materials including asphalt. Requirement: My client wanted to separate Asphalt to ot