How to find direciry exists or not

Hi,
    I am using LabWindows 7.1.1, I am able to create a new directory using MakeDir() function.Now I want to know whether the directory exists or not before creating the Directory.Please help me in this issuse.
Thanks in advance
cheers,
krishna

Hi krishna,
In LabWindows/CVI, under the Library Tree, navigate to Libraries >> Programmers Toolbox >> File and then use the FileExists function. You can also use the GetFileAttrs function which returns 1 if the specified file is a directory. You can use the FileExists function on directories. Refer to the Using CVI to Programmatically Check File or Directory Existence KnowledgeBase as well.
Best Regards,
Message Edited by Jonathan N on 12-27-2006 10:23 AM
Jonathan N.
National Instruments

Similar Messages

  • How to find suitable( existing) function group for a Function Module ?

    How to find suitable( existing) function group for a Function Module to be created?
    This is FM for converting amounts to text.

    Hi,
            If you are not sure into which Function group your FM should go in then its advised to create a Function group of your own. Its not advised to create a function module in any other function group unless its owned by you since your FM can get deleted by others or it can get changed.
    Create your own Function group. But if you want to create in an existing FG then best way is to find out the Function Group by searching for suitable existing Function module then see their function group
    Regards,
    Sesh

  • ICWC case from 4.0 to 5.0, how to find an existing case

    I don't see how to find an existing case in CRM 5.0.  I'm trying to link a service ticket to an existing case
    I know 5.0 required some additional configuration to assign Case profile in CRMC_IC_MAIN and I created the case profile in config ICWC > business transactions > case management > define profile for case management.  I assigned our 4.0 case type to the case profile.
    In the ICWC when I select Cases from the Nav Bar I see three windows
    - Attributes  in upper left
    - Note in upper right
    - linked objects & log lower section
    but none of the hyper links take me to where I can look up past cases.

    SAP help says the search is done in the Inbox which I think is different than 4.0 but I think I figured out the configuration.
    http://help.sap.com/saphelp_crm50/helpdata/en/0b/77c6d05eec445480a919cdcfa6bb30/frameset.htm
    Case search
    You can search for cases in the agent inbox using different selection criteria. If you open a case in the agent inbox, the view set Cases is displayed automatically.
    Alternatively, you can use the separate case search if you have set this up in Customizing.
    Use the text search function in the Knowledge Search to search for case notes, documents and business objects as well as to search for cases based on the long text description of business objects. You can e-mail cases found using the Knowledge Search to internal and external parties. Case header information and attachments are sent.

  • How to find an existing search help?

    Hi Friends,
    How to find an existing search help for some certain fields? for example search help "H_TVKO" is for "Help view for Sales Organizations"[for the field VKORG], and search help "MAT1" is for "Find Material Number"[for the field MATNR]...... but how to find these search helps for a certain field?
    Thanks a lot!!

    Hello Qiwei,
    You can find the search help using their table and fields name.
    simply you have to point the cursor on same field for which you want to see search help in SE11.and then in same window search help tab available click on this..
    It will show all search help which is having same field.
    Have a Nice Day.
    Regards,
    Sujeet
    Edited by: Sujeet on Jan 14, 2009 10:41 AM

  • How to find the existing START ROUTINEs in Transfer Rules in whole system ?

    Hi all,
       How to find the existing Start Routines in Transfer Rules in BW System, please ?
       I know that we could find from the Transfer Rules.
       Is there any way to find instead of looking at Transfer Rules for <b>each</b> InfoSource?
    Thanks,
    Venkat.

    Hi Venkat
    You can find it in these tables
    RSTRAN
    RSUPDROUT
    RSAROUT
    RSAABAP
    RSAABAPINV
    Thanks
    Tripple k

  • How to find  the existing workflows

    Hi Gurus,
    How to find  the existing workflows, and assign a  user  to a role.
    Suitably rewarded for helpful answers.
    B S B

    Hi,
    You can find existing workflow in Transaction PFTC.
    Select Task Type as Workflow Template(WS) and either do F4 on Task
    or put some description and press enter.
    For assigning a user to a role, check transaction PPOCW. (If in an Org. Unit) or through SU01.
    Regards,
    Ashish

  • How to find the existing request no for Smart form

    Hi Experts,
    plz tell me how to find the existing request no for Smart form in ABAP.
    thanks in advance.
    regards,
    radhika.

    Radhika,
    Choose Goto > Object Directory Entry> Lock Overview On the Initial screen of the "smartforms" transaction, after entering the actual smartform. This would give you the request number for the smartform.
    Regards
    Narasimhan

  • How to find the existing Idoc...

    Hi all
    How to find the existing Idoc...
    in tranction we02..?

    Please find the function module that is being used to generate the inbound/outbound IDoc.
    Then you go to inside the FM and search for 'CUSTOMER-FUNCTION' in the main program.
    This is the place that provided by SAP to modify the IDoc segments.
    CALL CUSTOMER-FUNCTION '012'
      EXPORTING
        DEKKO              = EKKO
        DPEKKO             = PEKKO
      TABLES
        DEKPO              = XEKPO
        DPEKPO             = XPEKPO
        DEKET              = XEKET
        DH_APPL            = APPL.
    Hope this will help.
    Regards,
    Ferry Lianto
    <b>Please reward points if helpful.</b>

  • How to find out existing Reports and sap scripts and smartforms ?

    Dear Friends ,
    How to find out existing Reports and sap scripts and smartforms ?
    ( e.g: how many existing reports and SAP scripts are available in MM or SD module , What is the procedure to find out ? )
    Thanking you.
    Regards,
    Subash.

    scripts r stored in TNAPR TABLES

  • Pass Server Info and find service existed or not

    Hi All,
            I have written batch code which is running fine to find weather service is existed or not.But I want to pass parameter which holds server name and find weather the service is existed or not .Can any one help me how can i do it
    @echo off
    net start | find "SQL Server Analysis Services (MSSQLSERVER)" > nul 2>&1
    if %ERRORLEVEL%==0 echo "MS SQLServer Analysis Service running"
    if %ERRORLEVEL%==1 echo "MS SQLServer Analysis Service not running"
    Pause
    Samar

    I would highly recommend that you start to learn PowerShell, instead of trying to work with batch files at this point.  It's the future of command-line functionality in Microsoft products, and it's going to be harder and harder to find tools that enable
    you to perform the same tasks on the old command prompt.
    For this specific question, though, all that's missing from JRV's example is the /node:"ComputerName" parameter to wmic.exe.

  • How to find which song is NOT on a playlist?

    How do you find which song is NOT on a playlist?
    I don't see a column I can add in the Music section under my ipod that allows me to choose playlist, all I see is Album, Album Artist, etc... but no Playlist column...
    I keep finding fairly minor but very frustrating ease of use issues with this iTunes after getting my iPod... Yet another product suggestion going in I guess unless someone has an easy solution..

    Ok...I don't know a quick way to find this out so this method will likely be a time consuming pain. The only method I know of is right clicking on each track and looking at the "show in playlist" option. It should show you any playlist the track shows in. If you don't see it in one (It may show in "purchased" if you bought it from iTunes) then it's not in one of your playlists and you can then go to the "Add to playlist" option and put it in one of your existing ones that shows in the list. Or create a new one.
    There may be an easier way to do this but that's the only method I know.

  • How to find G/L accounts not posted ?

    hi,
         i want to know wht is the logic involved and tables required to find out G/L accounts not posted i want the flow how to find out ? Thanks in advance

    Hi,
    I finally found a report which can be used to find the GL Accounts not posted. You can use the report S_ALR_87012311 - G/L Account Balances and Line Items to find out the GL Accounts not posted. Run the report by ticking the checkbox "Print Accounts not posted to".
    This will give the list of the accounts not posted based on your data selection.
    Hope this helps.
    Regards
    Mahendra

  • How to find which table is not being used ?

    Hi,
    I am in need of releasing space from the common schema we have. i have been permitted to drop the tables which has not been used for the last three months.
    Can anyone please suggest how to find the tables that has not been used for a given amount of time.
    Thanks and Regards.
    Rajib

    i have been permitted to drop the tables which has not been used for the last three months.Can I just chip in an observation on this premise? It's not unusual for systems to have processes that run quarterly or even annually. You need to be very careful about dropping "unused" tables - you might just kill your organisations end of year reporting system.
    Is buying more disk space really not an option?
    Cheers, APC

  • How to find aggregates which are not used.

    Hi ,
    There are lot of aggregates in my system , so i should deactivate the aggregates which  are not used from long back. so how to find out all those , can u plz guide me ,

    You can also check the usage column of the aggregates. If usage value is high then the aggregate is used very frequently.
    If there is no value at the last used then the aggreagete is not used at all.
    Hope it helps
    Regards
    Sadeesh

  • How to find photos which have not been updated to the current Process Version?

    How can I search and/or filter to find photos which have not been updated to the current Process Version?  I would like to get a list of the photos rather than going through them one by one and looking for the lightening bolt.

    Thank you!  As my memory fades, it is good to know that my memory is backed up with you and others on this forum!

Maybe you are looking for

  • Can't get to the I store

    Can't get to the I store from my I pad

  • Import Oracle BPA model (EPC) to Oracle BPM 11G

    Hi, I have my business process modeled using Oracle BPA product (EPC format). Now I need to import this model into Oracle BPM 11G which uses BPMN 2.0 format. Does any of the softwares provide a way to transform EPC models to BPMN 2.0 format. These ar

  • Proxy server keeps asking for authentication

    My MacOS10.7.3 server coordinates a small subnet of 100 macs. To access the internet as provided by the larger organisation we must go through a proxy server. Unfortunately the proxy server keeps asking for authentication and checking the Remember Th

  • EREC: Qucik search functionality for locked profiles of candidates

    Hi Experts, Normally when a candidate register themselves in e-Recruiting application, they have two option to set their profile status i.e. 'Locked' and 'Released'. Locked - Applicant is inactive or not looking for change. So when recruiter do a sea

  • This one is very strange. One track from album won't import...

    I have been trying to import a CD I own for a long time. I'd hoped that getting my new Mac might have solved this problem but... The CD in question is fine,. it works and imports OK, in totality, in my partners account. It plays fine in my account. H