How to find EXPORT MODE of MEMORY ID with ref to IMPORT MODE of MEMORY ID

HI ,Friends,Iam not able to find Export memory ID with ref to available IMPORT Memory ID in particular SD routine of a program.
Plz let me know how to find Export Memory ID reference program with available import memeory ID as I need to do changes for exiting routine program done by somebody .

As it's an SD routine probably the simplest way is to set a breakpoint on the keyword 'EXPORT' when you first enter the transaction. May need to skip a few but eventually you will come across the correct one. When you do find it I would also suggest placing a comment on the IMPORT statement to say where the value has come from for future reference.

Similar Messages

How to Configure Transparent caching on Cat 6500 with CSM in bridge mode?

hi.
I found How to Configure Transparent caching on Cat 6500 with CSM in routed mode.
But,
I need help How to Configure Transparent caching on Cat 6500 with CSM in bridge mode?
Please let me know sample configuration.
thanks.

Hi,
I wrote the document you mentioned and I also wrote the one below.
http://www.cisco.com/en/US/partner/products/hw/modules/ps2706/products_configuration_example09186a00802c1201.shtml
The one with the SSLM is a bridge mode config.
If you replace the SSLM with a cache [or a farm of caches] it would be a similar config.
Replace the SSL21 vserver with an HTTP vserver [most important is to keep the vlan configured on each vserver]
Regards,
Gilles.

How to find users who are running IE with different credentials ?

How to find users who are running IE with different credentials ?
Is there any tool or a solution in the market will help or a i can use GPO or even Power Shell ?
thnx & Regards ,,

Hi Salman,
Based on your description, we can use Windows Credential Manager to check this. Windows Credential Manager stores credentials, such as user names and passwords that we use to log on to websites or other computers on a network.
Regarding Credential Manager, the following article can be referred to for more information.
Credential Manager
http://windows.microsoft.com/en-in/windows7/what-is-credential-manager
Manage passwords in Internet Explorer using Credential Manager
http://www.thewindowsclub.com/manage-passwords-internet-explorer-10
Please Note: Since the above website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Best regards,
Frank Shen

How to find the list of applications registered with OID?

Could some one please help me?
how to find the list of applications registered with OID?

Is there any table from which we would be able to see?

How to find in which table field "DDTEXT" with entry "xyz"

How to find in which table field "DDTEXT" with entry "Item number in contract account document" exists.
There are too many tables with field name "DDTEXT"

Refer:
Getting short text of data element

How to find export statement for Import statement ?

hi experts,
I am having an IMPORT....from memory ID statement in my program.
how could i find the location of EXPORT ...to memory ID statement for the IMPORT statement.
Pls help
saravanan.

Not possible if you are just trying to find it without knowing the links between your program and the other programs. You have to know all the objects that relate to the process that your program is automating and then you can probably dig into those related programs to see if there is an EXPORT statement there. But it is not as simple as double clicking on the IMPORT statement or doing a WHERE-USED on the memory ID.

How to find out which list is associated with specific incoming email address

Hey Guys,
I've a received a request today from a user asking me which list was setup with a specific incoming email address.
Is there a way to find out which list is associated with an email address?
Thanks

OK after a bit of research I found a way to achieve this.
I simply looked up the email address in ADUC, then did a search in SP with the display name. I could locate the list and manually confirm it was configured with the incoming email address I was looking for.
I also found the below script on Stackoverflow, but got "The 'using' keyword is not supported in this version of the language." when I tried to run it. Any idea how to fix that? I'd like to have a script to link a library to an email address istead of the
manual approach described above.
http://stackoverflow.com/questions/4974110/sharepoint-how-do-i-find-a-mail-enabled-list-if-i-only-have-the-email
$SiteCollection = ""
$EmailAddress = "" # only the part before the @
# Load SharePoint module if not done yet
if((Get-PSSnapin | Where {$_.Name -eq "Microsoft.SharePoint.PowerShell"}) -eq $null) {Add-PSSnapin Microsoft.SharePoint.PowerShell;}
cls
using System;
using Microsoft.SharePoint;
namespace FindListByEmail
class Program
{a
static void Main(string[] args)
string siteUrl = $SiteCollection;
string email = $EmailAddress;
using (SPSite site = new SPSite(siteUrl))
foreach (SPWeb web in site.AllWebs)
try
foreach (SPList list in web.Lists)
if (list.CanReceiveEmail)
if (list.EmailAlias != null && list.EmailAlias.Equals(email, StringComparison.InvariantCultureIgnoreCase))
Console.WriteLine("The email belongs to list {0} in web {1}", list.Title, web.Url);
Console.ReadLine();
return;
finally
if (web != null)
web.Dispose();

How to find R/3 field tech name with the help of BW fields.

Hi ,
How will i come to know that particular R/3 field is mapped to BW field.
for .e.g
I have BW Fields in Cubes , how can i see the R/3 field tech names for that .I can see in Infosource , but for few areas i am not able to find the infosource in sap help.com.
Pls let me know how to find the R/3 Fields for BW Fields?
Regards,
Nithi.

Hi
These are the following approaches used
1.) Check the SAP BI Content website "http://help.sap.com/saphelp_nw70/helpdata/en/3d/5fb13cd0500255e10000000a114084/frameset.htm". From here find your datasource . here u can get a list of fields in the datasource along with your R3 field and infobject.
2.) Go to Transfer rules structure of the cube or DSO, there u wuld be able to see all fields in Datasource structure fields, See the left pane and right pane. there u will se ur R3 fields and Infoobjects of BW along with their mapping.
3.) Follow this process
in R/3 system - use tcode SE11 ->ROOSFIELD -> GIVE Extract Structure & Field Name > Check Records with Version D and A.
NOTE : Make sure the fields of the datasource in R3 are not hidden , otherwise you wont be able to vierw ur data.
From
ManesH

How to Configure Transparent caching on Cat 6500 with CSM in routed mode

I am trying to configure Transparent caching on Cat 6500 with CSM in routed mode, but facing some problems in it , also I have gone thru the example config on cisco site for transparent caching using CSM on Cat 6500 , but the above does not fit my clients requirement.
The scenario is like
Access Switches - Cat6500 with MSFC & CSM - Internet Router
|
Cache Engines and Real servers
The clients as well as real servers are on seperate VLANs (L3) and the requirement is to load balance the internet traffic using cache engines.
I'd really appreciate any helpful suggestions or any useful links/docs/info on this.
Thanks
kumar

Hello Joerg,
Thanks for the reply.
I have already gone thru the sample config shown by this weblink, however this link refers to configuring transparent caching on the CSM in BRIDGED MODE ( i.e both the client and server vlans are having the same IP address ) but in our case , we have multiple L3 VLANS on the CAT6509 having IP addresses in different SUBNETS , and the Real servers to be used for caching also exist on one of these VLANS. Thus, the scenario described by the Weblink does not apply here. Also , in the configuration referred by the above weblink, the VLAN 100 is configured as client , however the endusers are shown to be on vlan200 which is configured as SERVER VLAN in the CSM.
Dont you think there is something wrong here, I mean the endusers should be on VLAN 100 (Client) and real servers on VLAN 200 (SERVER).
So, I have to configure CSM in routed mode ( i.e both the client and server vlans will have seperate IP addresses in different subnets ) and the endusers will be on all VLANS .
Pls let me know , how I can implement this solution.
Thanks again
Sudhir

How to find out i phone is unlock with out sim card

how to find out i phone is unlock without sim card

Put a SIM in the device from a carrier that it is not locked to.
Contact Apple Customer support, provide them the Serial number and they may be able to provide that information.

How to find out all the tables associated with particular T-code or Program

Hi All,
In 4.6B we have a transaction code SE49, where we can see all the tables associated with particular Transaction code or Program.
But in ECC 5.0 or in ECC 6.0 this transaction code is not available.So is there any alternative where i can find out all the tables associated with particular T-code or Program.
Thanks
Shubham

Hi,
you are right, Transaction SE49 as well as SE48 do not exist anymore I'm afraid, they
are discontinued.
You might try to create a transaction variant:
1) Start SE93 to create a transaction variant
2) Specify a name, eg. ZSE49, and choose the first option:
   "program and screen (dialog transaction)
3) Here specify SAPMSEUZ as program, and 200 as screen number
4) Choose a suitable development class (package) if you want it to be
   transportable or Local (=$TMP) if non-transportable
5) press Save
Same applies for SE48, same program but dynpro 100.
Sorry for not being able the reasons behind the decision to discontinue
these transactions. I suppose at least part of the functionality was
integrated in SE38.
Best regards
Erika

SharePoint Calc Column - How to Find and Replace ANY & ALL Values with Something Else

Haven't found a solution on this even though it seems like it should be cut and dry.
I have a column containing characters "-" (e.g., XXX123-123-fjhrh-sdafsdfsd). I want to find every "-" and replace it with "@". Seems easy but so far haven't found a solution. My calc column always seems to stop at the first
occurence of "-" and only replace that one. Seems every forumula wants you to tell SharePoint where to start (position). You can't simply tell SharePoint, Find this "-" ALL OCCURENCES and replace with this "@" ALL OCCURENCES.
I don't have the option of saying start at this position because my data is not the same in every cell/field (e.g., number of characters).
Closest I've gotten is this:
=REPLACE([IN THIS COLUMN],FIND("-",[IN THIS COLUMN]),LEN("-","@")
RESULTS:
XXX@123-XXX-123

Hi JJSHAREP,
The formula only works when there are only three "-" in the column value, and the formula will fail if there are more than or less than three "-" in the column value.
I recommend to use Jquery code to replace the characters in the column called IN THIS COLUMN in the UI:
<script src="http://code.jquery.com/jquery-1.10.2.min.js" type="text/javascript"></script>
<script type="text/javascript">
$(function () {
var Index=0;
$(".ms-listviewtable tr th").each(function(i){
if($(this).find("div").attr("name")=="IN_x0020_THIS_x0020_COLUMN"){
Index=i;
$(".ms-listviewtable tr").each(function(i){
if(i>0){
var value=$(this).find("td").eq(Index).text();
var value1=value.replace(/\-/g, '@');
$(this).find("td").eq(titleIndex).text(value1);
</script>
Best regards.
Thanks
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

How to find export to database cluster

Hi,
i was going through an exit EXIT_SAPLCLFM_002 include ZXCLFU02.....
i came across the statement:
import l_verid
l_werks
from database indx(st) id l_charg.
so how can i find where the corresponding Export statement is?
regrads,
Ravi Valluri
If its not the correct forum to post in, pls let me know so that i can move to other

Hi.
As I understand, you use CLFM0002 user-exit.
Run transaction, which works with classifications.
Before starting it enter /h command and go to debug mode where create breakpoint for
export ABAP command.
Then while debugging you will come across lines where export statements occur, if such ones exist.
May be among them you will find corresponding export statement for import statement mentioned by you.

How to find files that either shouldn't be there or are eating up memory

Hi,
I download a lot. (I have 12 TB external and I've used it all -- several times.) I'm afraid that at some point I must have downloaded something I shouldn't have, as my computer has gotten slower and slower over the year. Is there a way to find out what has been added to my OS/computer that wasn't in the orignial instal?
Also, is there an easy to follow tutorial that explains the the data generated in the Activity Monitor? (The CPU might show 94% idle, the System Memory 12 of 16 GB free, and Disk Activity, Disk Usage, and Network all at the very low end of the usage bar, but it still takes a bit of time to process my requests.) I'd like to better learn how to trouble shoot on my own.
Thank you much,
OSX 10.8.2
1TB
16GB
2.8GHz Corei7

Remove everything from your login items here:
 > System Preferences... > Users & Groups | Login Items
by selecting the entire list, and hitting the '-' minus button underneath (do not check the 'Hide' boxes).
Restart the mac and test to see if the slowness remains.
NOTE: You might want to take a screenshot of the login windows panel (use 'Command-Shift-4', move the cursor over the panel, hit the spacebar and click mouse or trackpad) before doing the above procedure so that you have a record of what was in the list.
If the problem is solved, you can start adding necessary items (those you need to run on login) one at a time. Restart the mac and test after adding each to determine which one causes the slow downs).
If removing everything from login items doesn't solve the problem, take a look at what 3rd party apps you have installed. MacKeeper? Antivirus software? LogMeIn? Something you're running is hogging resources. Check what's using up all the %CPU in Activity Monitor.app.

How to find documents on Configuring database to work on Shared server mode?

Hi,
Where can I find documents to configure my database (Oracle 9i Release 2) to work on Shared server mode?
The Aix 4.3.3 platform has 1 CPU and 1G Memory,and can support only less than 20 connectiions while serving a B/S application.So I want to try MTS.

Hi,
a good help for me was this
http://www.oracleadvice.com/Tips/MTS.htm
Afterwards you are ready to understand the online doc
and to find the best configuration.
Regards
Christoph

How to find EXPORT MODE of MEMORY ID with ref to IMPORT MODE of MEMORY ID

Similar Messages

Maybe you are looking for