How to find extractor of a field in CRM
Hi Everyone,
I need your help with this one.
In a CRM screen I see the fields and with F1 help I can see it is being stored in a table through a structure. How do I find which extractor the field is being extracted into BW.
This one is a custom development related with CRM activities but I am not able to find out which extractor is extracting this field and where in BW is it being stored.
The developers named of fields differently in CRM and BW. Ofcourse this doesnt matter unless they mapped right.
But how do I find where they are being mapped. It must be in BADI, but is there a way to find where this field is being called for extraction in BADI.
Thanks
Your help will be appreciated.
Kumar.
in BWSE16-- table name 'ROOSOURCE'..then for APPLNM put 0CRM and execute...
This will display all CRM datasources in BW. Note down all datasource technical names.
Again in BW-- SE16 -- table name RSOSFIELDMAP
For OLTPSOURCE -- enter one datasource technical name
For FIELDNM -- enter field name u want to find out
like this check all datasources one by one
Similar Messages
-
How to find out the manditary fields in an IDOC
Hi,
How to find out the manditary fields in an IDOC.
For example MATMAS05 .
For this 2 segments I want to find out the manditary fields.
E1MARA
E1MAKTMHi,
go to transaction WE30 and give the corresponding IDoc type and enter. Then you will get all segments for that IDoc type then double click on segment. A popup box will come in that it will show a check box whether it is a mandatory segment or not. And segment editor button will give all the field details.
Regards -
How to find where the screen field is stored in table
Hi all,
How to find where the screen field is stored in the table .
for some transactions if i press F1 on the field and after checking for the technical help.
I can only find the struture for the screen field, but whereas i need table name for it.
Can anybody help me how to find the table name where the field is stored.
Regards,
MadhaviHi,
Just hitting a F1 on screen field and getting structure name will not help in getting table name.
First you need to know the flow of data in the reqd module, which will help you know all the tables in that module with there most of the fields with the data flow, now you need to work on your own to figure out that in which actual tables that value is stored.
Hope this helps you.
Regards,
Tarun -
How to find in which table field "DDTEXT" with entry "xyz"
How to find in which table field "DDTEXT" with entry "Item number in contract account document" exists.
There are too many tables with field name "DDTEXT"Refer:
Getting short text of data element -
How to find out the tables related to CRM datasources?
How to find out the tables related to CRM datasources? For example, the table related to 0CRM_OPPT_H.
Regards,
R.RaviHi Ravi,
To find out all tables used go into the CRM source system to transaction RSA3 and prepare the selections for extraction of your datasource.
In a parallel session execute transaction ST05 and press the button 'Activate Trace'
Go back to the extracor checker and execute the extraction.
Switch sessions and subsequently 'Deactivate Trace' and 'Display Trace'.
This will list all tables used.
regards,
Olav -
How to find table name and field name thru Tcode
Hi,
how to find out table name and field names thru transaction code..........plz point out step by step.Hi
I am not getting your question... as i understand, if you go to SE84 tcode you can get it.
Go to SE84.Select ABAP Dictionary sub tree. Double click on "database tables'. Give some number in "Maximum number of hits. DONT GIVE ANY OTHER INPUTS. Just press F8. You will get all table names.
For fields also do like this by selecting FIELDS sub tree.
Reward if it is useful.
Thanks
Siva Kumar -
How to find table for structure field ???
Hi..
i need your expert help on this.
i am working on printing of terms of payment description. here there are explanation fields. it is coming from structure R052. and field name is TXT 02. here as per my understanding structure is coming from multiple tables so how i can find that from which table this field is coming??
thanks
h shahDear,
Well I cant say this is the solution for your issue, but have a look.
http://it.toolbox.com/wiki/index.php/Find_data_in_your_SAP_system_and_know_which_tables_do_what
DD02L - table properties
DD02T - table texts
DD03L - field properties
DD03T - field texts
How to find data related to a structure? With GREAT difficulty, but here are some ways (which will NOT work sometimes) to find specific fields if you know the structure's fieldname.
1) First, goto SE11, and enter your structure name. Goto the field that holds your data, and double-click on the element name. Once inside the element, do a where-used list for that element, searching tables only. Then go into each table, and see if you can find the one holding your data. There may sometimes be a huge number of tables displayed, but a lot of them will be empty.
2) Get the name of the program behind your transaction, goto SE80, and enter the program name. 99% of the time it will be part of a module-pool and bring up the pool. Goto the dictionary structures, and search each table there for the one holding your data.
3) Open a new session with transaction ST05, select SQL Trace, click on the Trace On button, and go back to your transaction (while leaving the session with ST05 open). Submit your transaction, and go back to the ST05 session. Click on the Trace Off button, then select the List Trace button. Continue with standard selections, and a BASIC TRACE LIST will appear. search thru the tables displayed under ObjectName.
and have a look at below.
You do know any transaction in which (related) data is used: 1) start the transaction 2) position the cursor on the field you want to have info about 3) press F1, then F9 4) now you see the technical information of the data element, such as table name and field name. 5) if the table mentioned is what you're looking for, you're done. It is also possible that the data element is in a structure and not in a table. Now you can either analyze the structure via trx SE11, or you can double click on the 'data element' field. In the next screen, use the 'Where used' button to find the tables in which this data element is used.
Additional tip: if you have found the table name, you can use trx SE36 to see the relationships of this table to other tables. You can use these relationships when defining queries, designing custom ABAP programs, etc. If you're lucky, one or more standard SAP logical database exist which contain the table you found in the previous steps. Proceed as follows: 1) start trx SE36 2) use the search help for the logical database name 3) enter the name of the table in the search help 4) press enter and, if you're lucky, you'll see a list of logical databases. Select one, press enter, select the radio button 'Structure' and press the view button. Now you'll see how this table is related to other tables.
And finally, I prefer, the simpliest way to contact the ABAP consultant for help.
Regards,
Syed Hussain. -
How to find out Last Changed Fields for a line item of a PO
Dear All,
Pls let me know is there any FM or procedure to find the last changed fields for each line item of a PO. I should be able to get the details on the basis of Last changed Date. Can u pls guide me in this?Hello,
Check the table CDHDR,CDPOS for PO items,
Check this code:
REPORT ZV_GET_LATEST_SO .
DATA: BEGIN OF ITAB OCCURS 0,
OBJECTCLAS TYPE CDHDR-OBJECTCLAS,
OBJECTID TYPE CDHDR-OBJECTID,
CHANGENR TYPE CDHDR-CHANGENR,
USERNAME TYPE CDHDR-USERNAME,
UDATE TYPE CDHDR-UDATE,
UTIME TYPE CDHDR-UTIME,
TCODE TYPE CDHDR-TCODE,
TABNAME TYPE CDPOS-TABNAME,
TABKEY TYPE CDPOS-TABKEY,
FNAME TYPE CDPOS-FNAME,
CHNGIND TYPE CDPOS-CHNGIND,
END OF ITAB.
TABLES: CDHDR,CDPOS.
DATA: LT_CDHDR LIKE CDHDR OCCURS 0 WITH HEADER LINE,
LT_CDPOS LIKE CDPOS OCCURS 0 WITH HEADER LINE.
*REFRESH AUSG.
CLEAR CDHDR.
CLEAR CDPOS.
CDHDR-OBJECTCLAS = 'EINKBELEG'.
CDHDR-OBJECTID = '0000001784'. " Purchase order number
**SELECT A~OBJECTCLASS A~OBJECTID A~CHANGENR A~USERNAME A~UDATE A~UNAME
**B~TCODE
**B~TABNAME B~TABKEY B~FNAME B~CHNGIND INTO TABLE ITAB FROM CDHDR AS A
**INNER JOIN CDPOS AS B ON A~OBJECTCLASS = B~OBJECTCLASS
** A~OBJECTID = B~OBJECTID
** A~CHANGENR = B~CHANGENR
** WHERE OBJECTCLAS = 'VERKBELEG'
** AND OBJECTID = '0000001784'.
*SELECT * FROM CDPOS INTO TABLE LT_CDPOS WHERE OBJECTCLAS = 'VERKBELEG'
* AND OBJECTID = '0000001784'.
*IF NOT LT_CDPOS[] IS INITIAL.
* SELECT *
* INTO TABLE LT_CDHDR
* FROM CDHDR
* FOR ALL ENTRIES IN LT_CDPOS
* WHERE OBJECTCLAS = LT_CDPOS-OBJECTCLAS
* AND OBJECTID = LT_CDPOS-OBJECTID
* AND CHANGENR = LT_CDPOS-CHANGENR.
*ENDIF.
** SORT ITAB BY OBJECTCLAS ODJECTID DESCENDING.
*LOOP AT ITAB.
* WRITE: ITAB-UDATE."ITAB-UNAME.
*ENDLOOP.
*--- Interne Tabellen -------------------------------------------------
DATA: BEGIN OF ICDSHW OCCURS 50. "Ausgabeaufbereitung
INCLUDE STRUCTURE CDSHW. "Zwischendatei
DATA: END OF ICDSHW.
CALL FUNCTION 'CHANGEDOCUMENT_READ_HEADERS'
EXPORTING
DATE_OF_CHANGE = CDHDR-UDATE
OBJECTCLASS = CDHDR-OBJECTCLAS
OBJECTID = CDHDR-OBJECTID
TIME_OF_CHANGE = CDHDR-UTIME
USERNAME = CDHDR-USERNAME
TABLES
I_CDHDR = LT_CDHDR
EXCEPTIONS
NO_POSITION_FOUND = 1
OTHERS = 2.
LOOP AT LT_CDHDR.
CALL FUNCTION 'CHANGEDOCUMENT_READ_POSITIONS'
EXPORTING
* ARCHIVE_HANDLE = 0
CHANGENUMBER = LT_CDHDR-CHANGENR
* TABLEKEY = '00000000 '
* TABLENAME = ' '
* IMPORTING
* HEADER =
TABLES
EDITPOS = ICDSHW
* EDITPOS_WITH_HEADER =
* EXCEPTIONS
* NO_POSITION_FOUND = 1
* WRONG_ACCESS_TO_ARCHIVE = 2
* OTHERS = 3
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT ICDSHW.
IF ICDSHW-TABKEY+3(10) = '0000001784'
AND ICDSHW-TABKEY+13(6) = '000001'.
ENDIF.
ENDLOOP.
ENDLOOP.
Vasanth -
How to find roles with open field values
Hello SAP gurus,
I need to find a way to find roles with open field values. Some kind of report that returns me a list of all roles that, despite having a generated profile, it still contains empty field values in it.
Is there anything like it available on SAP?
Thanks
AntonioSome kind of report that returns me a list of all roles that, despite having a generated profile, it still contains empty field values in it
Hey I am not sure, but seems I might have seen some report like that. Can you try search report named PFCG* / PFUD*
Again this is either report (SE38/SA38) or may be FM (SE37). I am away from system a bit while and can't recall.
Regards,
Arpan Paik -
How to find Extractor mapped to an InfoObject.
Hi All.
I am quite new to BW. I am looking up the attributes related to OMATERIAL infoobject. I wanted to find out the particular extractor that is loading the attributes related to OMATERIAL (Eg OVENDOR etc). What is the transaction to do this. I want to see if any rules are there within that extractor.
I am using BW 3.1. Thanks in advance !!Thank you both for the quick reply. I looked up 0MATERIAL_ATTR. However it does not have the Vendor Number asosciated to the Material.
However when I do Maintain Master Data for Characteristic 0Material I can see the Vendor field there.
How do I figure out how this Vendor is populated. Is there some other extractor the loads it ? -
How to find database table for field in CRMD_ORDER?
Hello,
in CRMD_ORDER there is a field CRMT_7850_SERVICE_UI-DURATION.
The structure is CRMT_7850_SERVICE_UI
The fieldname is DURATION
How can i find out in which database table content of this field is stored?
Thanks a lot
Best regards
ManfredHi,
When you execute report CRM_ORDER_READ (trx. se38), entering your order nr, you will get
an overview of all the underlying tables and their entries of the order.
E.g. you will find structure ET_SERVICE_H, corresponding to table CRMD_SERVICE_H;
structure ET_SERVICE_I, corresponding to table CRMD_SERVICE_I.
I expect your field (duration) to be in CRMD_SERVICE_I.
regards,
Wim -
How to find information from a field in R3 to get it in Business Content
Hi all, my case is this:
i want to learn how to get or struct a model in BW, for example, my task is make a query where the client wanna get information , and he told me the fields, ok, in R3 i got the name of the field (NODISCONCT), the struct (EANLD), and others fields more, ok, now i have to activate the data model to load this fields in InfoObjects, thats the problem, i dont know how make my model and find it in Business content, i was looking for in http://help.sap.com but i couldnt find it, but i want to learn more how to do it, and the best way to do this task, help me guys, i know this is a very important step that i must learn very well to make my carrer in BW, i ll really apreciate it !
Thanks !Hi,
see suppose i can give you one example.
http://help.sap.com/saphelp_nw70/helpdata/en/ee/cd143c5db89b00e10000000a114084/frameset.htm
from this link you get idea about fi-ar and fi-ap
client will give you that these are the field i want . for this report. From report you can get idea
What is on it . Here you need to think you want to go top down or bottom up.
bottom up - you need to check with data source. then this datasource is related cube or dso and then report
just play with help.sap.com in bi content you will get idea -
How to find table name and field name in JSP FORM
Hi
In JSP form's like XML publisher responsibility>templet
In that form how can we see the system-last query . and how to see the table namehi yamini,
plz go to help->record history (for fining table name)
and
help->diagnostic->examine (for finding field name)& enter last_query
in JSP form also same above only i think.
or check in back end & apply who columns
Edited by: raghava bandi on Nov 7, 2008 2:05 AM -
How to find Table Name and Field Names given a Data Source
Hi,
I tried ROOSOURCE table in R/3 to find the Extract Structure and Extractor names for a specific data source, let us say 2LIS_02_ITM (PO Item Level).
I know the extract structure for this data source is MCO2M_0ITM
I am not able to find where this structure is extracting the data for every field.. I wanted to know the corresponding table name and the respective field names.. Both the existing and Appended fields..
Thanks,
NarenHi,
Check in in LBWE and Click on Maintenance and see the table names
EKKO
EKPA
EKPO
Tables are use for this DS
Eg:
MCEKKO BEDAT Document Date
MCEKKO BSART Document Type
MCEKKO BSTYP Doc. Category
MCEKKO BUDAT Accounting date
MCEKKO EBELN Purchasing Doc.
MCEKKO EKGRP Purch. Group
Note: here EKKO is table
https://wiki.sdn.sap.com/wiki/display/BI/BW%20SD%20MM%20FI%20DATASOURCES
thanks
Reddy
Edited by: Surendra Reddy on Mar 10, 2010 8:18 AM
Edited by: Surendra Reddy on Mar 10, 2010 8:19 AM -
Hi all,
while finding the link between the kzbew and the ebeln the only table i found is MSEG.
But i want to populate the data in this table only?
So please give me the solution how i can fetch the movement indicator for a particular purchase order?
As i am using the idoc segment MBGMCR02((for creating goods receipt)...i have to pass the movt. indicator with the movement type also.......?the field - description in MSEG says:
Movement Indicator
Specifies the type of document (such as purchase order or delivery note) that constitutes the basis for the Movement.
Use
This indicator is necessary, for example, to enable a distinction to be made between a goods receipt for a purchase order and a goods receipt for a production order. These two goods movements result in different data
and account updates in the system.
Dependencies
The movement indicator is derived from the transaction code.
what transaction do you want to use for your idoc?
Maybe you are looking for
-
I am having a real problem creating a simple button - I have created a Flash file using Action script 2, and when I create a simple button - text with a rectangle as a background, (see http://www.elkhavenestate.com), and the over state is behaving in
-
How to save a magnified image in Aperture or IPhoto
How do I save an image that I have magnified in Aperture or I Photo?
-
Saving a file as PDF from CC Illustrator
Just updated from CS3 to CC Illustrator. In the old CS3 if I saved a file as a PDF. Adobe acrobat would open and I would then see the file on the screen as a PDF. Now in CC the file just save as a PDF in illustrator and doesn't reopen so I can see th
-
Unable to connect Oracle Application Database using Discoverer Admin 10g
Hi, I have installed oracle Admin 10g on my machine and trying to connect oracle application database but every time i am getting error like "Unable to connect to: user@hostname Failed to connect to database Unable to connect to Oracle Application Da
-
Fans run watching video, but don't when using Safari
I am curious as to why the silverlight plugin ramps the fans up (3k+ rpm) when I am watching prime video's in Firefox, but when watching the same video's in Safari, the fans a pretty much the standard 2000 (2k - 1.5k) rpm. Happens with youtube too. S