How to find function module call in 'BP_GIVE_MESSAGE' in BAPI
Hi experts
i want debugg the BAPI_GOODSMVT_CREATE to find out what data passing to 'BP_GIVE_MESSAGE' function module.
i tried to find through FIND button i could not find it.
please can you tell me how can i find call 'BP_GIVE_MESSAGE' in BAPI_GOODSMVT_CREATE source code.
Hi experts
i want debugg the BAPI_GOODSMVT_CREATE to find out what data passing to 'BP_GIVE_MESSAGE' function module.
i tried to find through FIND button i could not find it.
please can you tell me how can i find call 'BP_GIVE_MESSAGE' in BAPI_GOODSMVT_CREATE source code.
Similar Messages
-
hi all,
how to find out particular function module suitable for this requirement.
how to findout fmHi Narendra,
Apart from above replies, you can find function modules this way:
1) Go to SE37
2) From Menu, click <b>Utlities</b> and select <b>Find</b> option.
3) A repository info system to find function modules will be opened.
4) Use wild cards in function module box or short description to find function modules.
PS: You can use this way to find programs in se38
Regards,
Vivek -
How to Debug Functional Module called via RFC?
Hi Experts,
Please, can someone explain to me how to debug functional module that is called via RFC? Thanks in advance.
Best Regards,
AleksandarHi Laxman,
First of all thank you very much for giving attention to my post. Ok, I am trying to debug function module in RM-CA (FICA), function module is called by CRM system (via RFC) and in addition all this chain is triggered by WebClient.
I have user that can login on the CRM as well as on RM-CA (ECC 6.0) system, but those users are different (unfortunately I do not have administration permission so I cant change profiles of my users but I can ask for it). I can without any problem debug calls that come from WebClient, so setting an external break point in CRM system I can catch whatever I want but when process comes to point where actually call to back-end (RM-CA) takes place I simply cant get into functional module, that resides on RM-CA side. Actually what happens is that processing continues as was chosen NEXT STEP (F6).
To resume, two systems and two different users. Where XCM user should be created? (on RM-CA system or CRM). Should I change something in Menu option Utilities -> Settings -> ABAP Editor tab -> Debugging tab, in field users? If you need any additional info please tell me.
Thanks again for your support.
Aleksandar -
How to find function module's and tables used for the particulat screen or TCODE?
Hello Nation,
I would like to know how to find the function modules and tables used for the particular screen or TCODE or program.
Example : I would like know the function module used in the program RDBGFT?
How can i find that?
Thanks in advance ,Awaiting your reply.Make use of Find function with the keyword "CALL FUNCTION".
Make use of the same find function with the keyword "Select" to know the database tables used.
Regards,
Philip. -
How to find function module in se37
hello friends,
i am supposed to extract revesion level, matnr, plant from sap to an excel sheet.
matnr and plant we can get from marc or mara, but i could not find revision level on these tables.
the technical name is REVLV
i searched for function modules in se37 i got 3 function modules, but there was no documentation,
how does anyone get tpo know which function module works for them , with out having documentation.Hi,
What is your requirement actually and what purpose I did't get you
any how I got these below FMs which is having the field REVLV
you can go through below FMs.
/SAPHT/DRM_MAT_BOM_READ
API_DOCUMENT_MAINTAIN2
API_DOCUMENT_SAVE_BOM
BAPI_DOCUMENT_CHANGE2
BAPI_DOCUMENT_CHECKIN2
BAPI_DOCUMENT_CHECKIN_REPLAC
BAPI_DOCUMENT_CHECKOUTCANCEL
BAPI_DOCUMENT_CHECKOUTMODIFY
BAPI_DOCUMENT_CHECKOUTSET2
BAPI_DOCUMENT_CHECKOUTVIEW2
BAPI_DOCUMENT_CREATE2
BAPI_DOCUMENT_CREATEFROMSRC2
BAPI_DOCUMENT_CREATENEWVRS2
BAPI_DOCUMENT_GETLATEST
BAPI_DOCUMENT_GETLATEST2
BAPI_DOCUMENT_GETSTRUCTURE
BAPI_DOCUMENT_WHEREUSED
BBP_PROD_REVLV_CHECK
C14SX_BAPI_DOC_CREATE2
C14SX_BAPI_DOC_CREATE2_EXIT
CAD_DISPLAY_BOM_WITH_SUB_ITE
CAD_ECM_READ
CDESK_CALL_CHECKOUT_WIZARD
CDESK_CHECKOUT_WIZARD
CDESK_CHECKOUT_WIZARD_RFC
CDESK_GET_STRUCTURE
CDESK_WHERE_USED
CM_DI_PROCEED_MAT_PROV
CO_SD_BOM_SELECT_DIALOG
CSAP_DOC_BOM_CREATE
CSAP_DOC_BOM_DELETE
CSAP_DOC_BOM_MAINTAIN
CSAP_DOC_BOM_READ
CSAP_MAT_BOM_CREATE
CSAP_MAT_BOM_DELETE
CSAP_MAT_BOM_MAINTAIN
CSAP_MAT_BOM_OPEN
CSAP_MAT_BOM_READ
CSEP_MAT_BOM_READ
CS_RT_DIALOG_CALL
CV115_ECN_CHECK
CV115_ECN_REVLEVEL_SET
CVAPI_DOC_CHANGE
CVAPI_DOC_CREATE
CVAPI_DOC_MAINTAIN
DMU_DOC_BOM_EXPLODE
DMU_DOC_BOM_READ
DMU_MAT_BOM_EXPLODE
DMU_MAT_BOM_READ
EXIT_SAPLQAAT_002
EXIT_SAPLQBCK_001
EXIT_SAPLQBCK_003
EXIT_SAPLQPL1_001
MB_CHECK_MPN_RELATION
MB_CHECK_MPN_VALIDITY
MB_MPN_CHANGE_READ_DATA
MB_SEARCH_HTN_MATERIAL
MEPO_CONFIRMATION_PAI
MEPO_CONFIRMATION_PBO
MEX_CHECK_REVISIONSSTAND
ME_CONFIRMATION_MAINTAIN
ME_SEARCH_REVISION_LEVEL
MMPUR_Q_INFORECORD_DISPLAY
QAAT_CHECK_QM
QBCK_INSP_TYPE_LIST
QBCK_INSP_TYPE_NEXT
QBCK_QINF_LIEF_ZAEHL
QBCK_QINF_QUANTITY_CHANGE
QBCK_QINF_READ
QBCK_QM_DOCUMENT_TEXTS
QBCK_QM_GR_CHECK
QBCK_QM_PUR_CHECK
QBCK_QM_PUR_MNG_UPD
QBCK_QM_SYSTEMS_COMPARE
QBCK_VB_QINF_PLOS2_POST
QBCK_VE_QINF_STATUS
QELA_QINF_SELECT
QPAP_PLAN_SELECT
QPL1_CHECK_CREATE_POSITION
QSS1_QINF_SHOW
QSS2_REVLV_F4
RFC_DISPLAY_BILL_OF_MATERIAL
ZQM_CREATE_05_INSPECTION_LOT
Regards
Ganesh -
How to find function module exit name when i know the Include
As per my requirement i should change the existing exit. I know the include name but i want to
know exit name. How to find out exit name based on include name. I tried Where-used list but it
is not giving the exit and function module name.Please let me know.
Regards
RajithaHello Rajitha,
1. You can do a "where-used" for the include & get the corresponding name of the exit function module.
2. Goto table MODSAP & in the field MEMBER pass the name of the function module & you will get the Exit Name in the NAME.
Hope this helps.
BR,
Suhas
Edited by: Suhas Saha on Mar 16, 2009 3:08 PM -
How to find function modules used in maintenance table views
Hi,
How do I find the function modules used in maintenance table views?
I'm using SM30 and trying to open the custom table but there is an error message saying CREATE DATA PROCESSING FUNCTION MODULE.
Thanks.
Kathhi
in se80 select functon group and put your table function group name there and click display. it will show you the function modules used for that tables.
Regards
Madhu -
How to find Function Module & Program Name Used by IDOC
hii Experts,
i want to find program name & function modules used in IDOC. I have Idoc type, Message type & extension type.
Help meHi Vinod,
Go to transaction WE64, click on the <b>search for message type</b> or press <b>shift+F6</b>. A popup will be displayed and here enter the message type for example 'QUOTES', u will be taken to the process codes available for the message type u have entered. click on the process code and data related to that process code will be displayed in the right hand side. Now double click on the process code, a pop up with function module name will be displayed. copy that and search for where used list in SE37.
Hope it helps.
Regards,
Phani. -
How to find function code for buttons on toolbar in oops alv
Hi experts,
I want to remove some buttons from toolbar in oops alv, i know the procedure like get function code and pass the value in a table and pass that table to IT_TOOLBAR_EXCLUDING of
method set_table_for_first_display but I WANT TO KNOW HOW TO FIND FUNCTION CODE FOR BUTTONS ON TOOLBAR IN OOPS ALVHi Prakash,
-->First you have to set the pf status in your alv program by,
{FORM pf_status USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'FIRST'.
ENDFORM. "PF_STATUS}
-->Pass this Subroutine name in the Function module, Reuse_alv_grid_display's parameters i.e,
i_callback_pf_status_set = 'PF_STATUS'}
*-->Then doble click on that pf status,
From the menu bar, select Extras->Adjust Template->List Viewer,
This will give you the existing statndard gui status of the program*
->Then catch that function codes in the User command Parameter of the Function module Reuse.. i.e,
i_callback_user_command = 'COMM'
And make a subroutine of the name 'COMM'i.e,
FORM comm USING ucomm LIKE sy-ucomm selfield TYPE slis_selfield.
DATA: okcode TYPE sy-ucomm.
okcode = ucomm.
CASE okcode.
WHEN 'REF'.
CALL FUNCTION 'POPUP_TO_INFORM'
EXPORTING
titel = 'MANSI'
txt1 = 'CREATED BY'
txt2 = SY-UNAME
TXT3 = ' '
TXT4 = ' '
endcase.
Hope it helps you
Regrds
Mansi -
How to trace Function Modules ?
Hi ,
Can anybody tell me how I can trace or find all the function modules called by a trancaction ?
I tried it using transaction ST05 but didn't got the expected result. Is there any other way to find it other than debugging the transaction ?
I want the same for transaction "VK12".
Thanks
AshwaHi Ashwa,
Approach it in this way.
1) Goto the transaction VK12, first screen (Change Condition records).
2) Then in the command prompt enter <b>/h</b>, ie.. switch debugging on.
3)Hit Enter, will enter the debugging mode
4)Then in the MENU BAR goto Breakpoints>Breakpoints At>Statement
5)Enter <b>CALL</b> here
6)Save and execute (F8)
Now your debugger will stop at all CALL statements, and thus you can trace the FM's called.
Regards,
Arun Sambargi. -
Function module call with destination
Hi,
how can check if a function module call with destination works or not ?
How can I debug.
What can be the reason if it is not calles
regards
ertas* to chcek the rfc Destination By pass RFC destination name and Connection Type..
RFC_CHECK_DESTINATION
or
RFC_CHECK_DESTINATION_ID
or
You can use this FM RFC_VERIFY_DESTINATION if your release is greater than 4.6C.
Check this sample code from Craig Cmehil's weblog.
CALL FUNCTION 'RFC_VERIFY_DESTINATION'
EXPORTING
DESTINATION = TMP
TIMEOUT = 10
EXCEPTIONS
INTERNAL_FAILURE = 1
TIMEOUT = 2
DEST_COMMUNICATION_FAILURE = 3
DEST_SYSTEM_FAILURE = 4
UPDATE_FAILURE = 5
NO_UPDATE_AUTHORITY = 6
OTHERS = 7.
IF SY-SUBRC EQ '0'.
"* Do code here
ENDIF.
Prabhu -
Need to track Function modules called when executing a transaction
Hi All,
Is there a way through which i can track function modules called, while executing a Transaction. Kindly provide pointers to it.
Thanks in advance.
Regards,
Navin.Goto SE80 Transaction and use Program name for corresponding Transaction Use Find operation like Call Function .. then you will get list of FM ..
There is no other option .
reward Points if it is helpful
Thanks
Seshu -
How to Use Function Module READ_TEXT
Hi
Anyone give me code or link or example for how to use function module READ_TEXT
and what are the parameters which we have to pass in module.
Regards.
MohsinHi,
refer the given below code.
CALL FUNCTION 'READ_TEXT'
EXPORTING
CLIENT = SY-MANDT
id = 'KOPF'uF0E0 these details we will get thru transaction , where we enter these details.
language = 'EN'uF0E0 these details we will get thru transaction , where we enter these details.
name = TNAME "table name
object = 'AUFK' " these details we will get thru transaction , where we enter these details.
* ARCHIVE_HANDLE = 0
* LOCAL_CAT = ' '
IMPORTING
HEADER = HTEXT
tables
lines = LTEXT
* EXCEPTIONS
* ID = 1
* LANGUAGE = 2
* NAME = 3
* NOT_FOUND = 4
* OBJECT = 5
* REFERENCE_CHECK = 6
* WRONG_ACCESS_TO_ARCHIVE = 7
* OTHERS = 8
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Thanks
Arun -
Function module called for order report in pegging screen
From MD04 when we try to find out the higher level production order it takes us to the planned ind req(PIR). In that screen, we have an "order report" button which takes us to the production order linked to the PIR.
Can anyone please let me know the function module that is called when the "Order report" button is hit.
Cheers,
KBHI
I am facing the same problems with the pegged requirements and an not able to read the order route using MD_PEGGING_NODIALOG .
i am not able to find function modul CNM2_ORDER_PROGRESS which is mentioned in this forum?
It this a new module with a new service package - we have not put any service package on since 2008 in our 6.0 version. -
How to use functional module " DETERMINE_DUE_DATE"
Hi All,
Can anyone suggest how to use functional module " DETERMINE_DUE_DATE" as it is used in an FI transaction code "FBL5N" and i have to use it in my zprogram to capture the net due date..please suggest..
Regards,
Shanuhi,
CALL FUNCTION 'DETERMINE_DUE_DATE'
EXPORTING
I_FAEDE = LS_FAEDE
IMPORTING
E_FAEDE = LS_FAEDE
EXCEPTIONS
OTHERS = 1
Maybe you are looking for
-
Dear All, I have created a view on following tables MARA, AFKO and MSEG. The Table/Join condition is as follow: AFKO--AUFNR = MSEG--AUFNR AFKO--PLNBEZ = MARA--MATNR I have included all the fields from MSEG and other all fields from MARA and AFKO. Th
-
Hello! I'm new to this Linux thing but I think I have my first little contribution!! I was using this CompizSnap script to emulate Aero snap window resizing on my desktop. (http://mikesubuntu.com/2010/06/snap-win … ng-compiz/) I'm not sure if there i
-
Problem in validation of Data type
Hello, I have create a data type where I define elements with maxlength and pattern. But when I want to test a mapping with a wrong message, there is no error. Why pattern and maxlenght re not use to validate the xml message ? Thanks Regards Chris
-
SOAP Adapter 3.0: Response
I cofigured a soap call to a web service which does work correctly(after some time...); before when there was some errors, I was able to see them from the transaction 'SXMB_MONI', but now, which all seems to be ok, the message is processed correctly,
-
Require help on User Exit for t-code VA31
Hi All, I have a requirement of updating one of the fields in the Customer Master for selected Sold-to-party while creating or modifying a scheduling agreement. Is there an user exit available for doing this? Please help on this as early as possible.