How to find Sort order in material master UOM

Hi,
Can any one tell me how to find the sort order for unit of measurement for UOM in additional data tab in material master.
If you see the db table, its stored in another order other than how its displayed on the screen.
Thanks,
Sujith.

It appears that it is sorting on the MSEHI in the t006a. This is the internal representation of the UOM. It is doing the same in the material master, you just can't see the internal field there.    In my system here is how it is sorting.    The commerical is what you see in the material master, the internal is what it is sorted by.
Internal     Commerical Description
A             A          A
B45           QML        kmol
BAR           BAR        bar
HN            /C         Hundred
PC            PC         Piece
TH            /M         Thousand
Regards,
Rich Heilman

Similar Messages

How to find sales order using material???

hi guyz,
i have a mateial and i want to check the sales order created with this material, I am using VBAP table in SE16,could you plz advice how can i check sales order for this material using table.appreciate immediate reply.
Thanks.
Md

Hi Md,
If you want to find the sales orders with the material number then go to SE16 and go to VBAP table.In the VBAP table selection screen give the material number which you want then press F8 you will get the all sales orders with your material number.
Thanks,
shyla

Re: Creation of sales order without material master

Hi All,
Is it possible to create sales Order, without material master. In case if so please provide the details.

Hi,
It is possible to save order without any material.
But if you want to restrict it, go to VOV8 and select your Sales Document Type and see if any incompletion procedure is assigned.
Now go to SPRO - SD - BASIC FUNCTIONS - LOG OF INCOMPLETION ITEMS - SALES ORDER ITEM -
and for your incompletion procedure maintain VBAP under table and MATNR under field name. Also you can tick on warning message, if user now tries to save the order without any material.
So now you can restrict saving order without having any material.
I am sure this will help you, if it does, please dont forget to reward points for contribution.
Regards
Ravi

How to upload PO text of material master ?

dear gurus,
how to upload PO text in material master in mass , can i use LSMW or BDC ? if yes then how?
I have done the recording but LSMW is not working for PO text.
Upesh khairnar.

Hi!
try using Purchasing Inforecord for this. in here you maintain master data linkage for Material Master and Vendor Master. You will just have to input the Material Number, the Vendor Account, and the Purchasing Org. In here you can maintain the PO text defaulted per Material Number. After the maintenance of Inforecord, the PO text will be reflected on the PO document.
Here is the ff Transaction Code:
- ME11 (Create Inforecord)
- ME12 (Change Inforecord)
- ME13 (Display Inforecord)
Hope this helps, Thank you.
Mik

How to Change Batch Classification of material master

Hi,
How to Change Batch Classification of material master in a production system,Pl note that there is no stock and no open qty still system is not allowing me to delete the old Classification and add my new classification.
Guys any solution for this.
Thanks in advance
rgds
bijaya pradhan

I believe there is a FM VB_CHANGE_BATCH for this, any body tried this FM?

How to find purchase order bapi

can any one help how to find purchase order bapi.

This isn't a Web Dynpro Specific question - moving to ABAP general.
However have you considered going to SE80 and searching for function modules that begin with the name BAPI and have purc in the name? Or maybe going to the BAPI Browser transaction (T-Code BAPI) and searching either in the Hiearchy or Alphabetical list. Probably not too difficult to find the purchase order object.

How to find sales order no., purchase order no. using sales order ID,PO ID

hi,
how to find sales order no., purchase order no. using sales order ID,PO ID
Thank you,
hari om

Dear Hari Om,
Could you please tell me, to what are you referring Sales Order ID and P.O. ID?
meanwhile check with:
T. Code: SE16
Table: VBKD
Execute (F8) the Report.
On to next Screen, Go to Menu-bar
Settings --> Format_Lists --> Choose Fields
Field: VBELN - Sales Order
Field: BSTKD - Purchase Order No.
Best Regards,
Amit

How to find the quatity of material in backorders

hi
in which table the backorders get saved.
from the v.15 transaction i got the backorders.
i like to know that how to find the quantity of material which is due in the backorders. what are the fields for backorder quantity of material.
regards
kq

Solved in this way
*"*"Local Interface:
*" IMPORTING
*"     VALUE(SUBCLASS) TYPE KLSCHL
*" EXPORTING
*"     VALUE(CLASS) TYPE KLASSE_D
*" TABLES
*"      RETURN STRUCTURE BAPIRET2 OPTIONAL
DATA: lv_clint TYPE clint,
        lv_clint1 TYPE clint.
CLEAR: lv_clint,lv_clint1,class.
FREE: return.
SELECT SINGLE clint
                FROM swor
                INTO lv_clint
                WHERE kschl = subclass.
IF lv_clint IS NOT INITIAL.
    SELECT DISTINCT clint FROM kssk
                    INTO lv_clint1
                    WHERE objek = lv_clint.
    ENDSELECT.
    IF lv_clint1 IS NOT INITIAL.
      SELECT SINGLE class
                FROM klah
               INTO class
               WHERE clint = lv_clint1.
    ENDIF.
    ELSE.
      CONCATENATE subclass 'Subclass not found' INTO return-message SEPARATED BY space.
      APPEND return.
      CLEAR return.
ENDIF.
ENDFUNCTION.

DMS Link witlh Sales order and Material master

Hi, all
here is my?
Can we link DMS to both sales order and material master, for service feedback of a product from customer.
rgds
ben

hi
you can link the objects through object link in dms.
go to tcode dc10 select the documnet type, click on define object link. click on new entry, select VBAP object for sales order and MARA for material master.
thanks ,
regards,
nitin
award point if useful

How to reset planned price in material master

Hi Gurus,
Can anyone tell me how to reset planned price in material master.
my user has run ck40n with wrong values, but i am not able to reverse costing run by using ckr1 or ck44. what could be the reason behind this.
even after executing tcode ckr1, i can still see the standard cost in material master.
how to reverse the costing run.
Thanks in advance
Suresh

Hi,
If you want reset you can delete the cuurent planned price in the material master for the cuurent period,
Use t.code CKR1, you have to enter comapny code, plant,material
In control parameters you have to choose radio button Current Standard Cost Estimates
Current Standard Cost Estimates
If you set this indicator, the system will select the current standard cost estimates for deletion.
If you also set the Additive cost estimates indicator, then additive cost estimates will be selected for deletion.
Regards,
Rama Mohan Bangaru

How to find Sales order numbers for List of Deliveries

Hi
How to find Sales order numbers for List of Deliveries
Thanks
Muthu

Hi,
Open the delivery list.
Select a delivery, goto menubar, environmment, document flow.
Here u can able to see the order no. (but, here u can see one by one , not cumulatively)
Regards
Kaleeswaran

Goods receipt reference to Purchase Order non-material master items

Dear all,
Platform: SAP R/3 4.7
I'm working in my customer environment whereby the purchasing scenario is as follows:
1. Create a normal PR me51n -. enter material description for the item to purchase, qty, price, plant and etc. My customer doesn't maintain material master for their items.
2. Create a normal PO me21n with reference to the PR. The information from the PR is automatically copied to the PO.
3. They receive the physical item and now it's time to perform GR.
My question:
Can I perform GR with reference to PO since the item in the PO is not from the material master, meaning there's no material # maintained for that item? I'd like to record the items ordered into the plant.
Thanks.
Steven
Edited by: Steven Khoo on Jul 22, 2010 3:15 PM
Edited by: Steven Khoo on Jul 22, 2010 3:16 PM

Hi Shubham,
"Hi,
Yes always you can make GR against of PO irrespective of material master maintained or short desription, which is commonly called non codified material.
Ccan be procuured against Account assignment ( cost center) which have to eneter in PR/PO in the account column then material group, which is mandatory field with this G/R/IR clearing account will get triggered during GR which is debit entry & GL which is maintained in the PO with the combnination of cost ceneter will be the Cr entry. Hope this helps you."
I'm still kind of confused. Normally, if a material master is maintained for an item, under accounting 1 view, we assign a valuation class. During GR, it will hit transaction key in OBYC - BSX and the system will be able to locate the corresponding GL account # mapped to that valuation class in the material master.
Now, for this "non codified material" you mentioned, how does the R/3 know which GL to assign? There's no accounting view for it since it's just a text description. This is where I'm really confused.
Thanks.
Steven

How change the sort order of searched items so last search item shows first. I DO NOT mean the order of search engines, but existing searches by down arrow key

I want to be able to change the sort order of items I have already searched for in the search box. I want to be able to hit the down arrow key and see my previous searches in the order of last search showing first. At the moment I have no idea how it is sorting and it's very annoying to have to re-type a query I typed 5 minutes earlier but because I typed in another 10 since it is lost somewhere in the list. Can this be done, I have googled but did not find the topic anywhere. Just to clarify, I DO NOT MEAN the order of search engines (which is all that comes up in google), I mean the actual text typed in which has been saved in the drop down list.
Thanks

The "form fill" feature uses a "frecency" algorithm, frequency + recency, similar to the address bar autocomplete list.
I found an extension that seems relevant, but the reviews are old so I'm not sure it's still working: [https://addons.mozilla.org/en-us/firefox/addon/searchbar-autocomplete-order/ Searchbar Autocomplete Order].
But... is the autocomplete not working? I would expect that typing a couple characters of the earlier query would filter the list so you can easily select it? Or is the problem that the list doesn't remember enough searches for that?

How to deactivate batch management at material master?

Dear Sir/Madam,
At the configuration,I have set "Batch Management" to be activated in plant level. I have a problem which some of the plants do not use batch management.I understand that if you tick "Batch Management" field in material master, batch management is activated for the material in that plant.
1. How do prevent user to tick "Batch Management" field in the material master which appears in the following views (depending on the material types):?
- Sales: General/Plant
- Purchasing
- Plant data/Stor.1
- Work Scheduling
2. Is there any alternate way to prevent user to activate "Batch Management" in that material of their own plant despite it is activated at plant level in the configuration?
Please advise.
Thanks.
Rgds,
Esther Chong

batch status management is just what its name says, you manage your batches with status (unreastricted use, restricted use).
But his comes only into place after you have activated batch managment, it is not causing batch managment, it is only working with batch managment.
Removing batch managment is almost impossible, you have to archive all batches first, to be able to archive the batches, you have to archive the production orders...creation of a new material is in most cases easier and quicker.
Wit batch managment at plant level each plant can independently decide if a material is batch managed or not.
if you want to restrict the entry of the batch management flag, then you have to customize your material master field selection at plant level.

HOW TO FIND MAINTANANCE STATUS OF MATERIAL

Hi
I want to find the materials from the system whose BOM is not yet created & whose routing is also not yet created & the finish material to which KMAT material is not assigned. how can i find this as my user want to no this things for maintain the BOM,ROUTING,& KMAT TO THE MATERIAL.

Hi!,
1. For materials w/out BOM: Please download the list of all materials and pass that to the table mast in se16 alongwith plant. You will find a list of materials which are having BOM. Just download that list in excel. Now using V-Lookup function of excel, compare the two lists and find out the odd ones (i. e. w/out BOM materials).
2. For materials w/out Routing: Same process can be repeated with table MAPL to get materials w/out routing.
3. For materials w/out assigned with KMAT material: Go to se11. Put MARC table and click display. Click CtrlShiftF10.
Go to settings>Field for selection in menu. Find field "STDPD" (Configurable Material) and check it. Click ok. You will find that field on the selection screen. Now maintain selection option for the field STDPD as "not equal to", keep width of output list and max. number of hits as blank, enter the plant in the the field "werks" and execute. You will find the list of materials for which configurable materials are not maintained.
You can also use above said logic to develop a small report for your requirement with the help of an developer.
Regards,
Uday

How to find Sort order in material master UOM

Similar Messages

Maybe you are looking for