How to find the obsolete sales order
Hi Gurus,
how can we find out the obsolete sales order in the system, in our situation these orders consuming the forecast now and causing problems..how to find these and delete..please share your ideas
Hi
Please go to Se38 and execute /SAPAPO/SDORDER_DEL report. You can execute the report for respective location by using different flags. I hope this will provide you the required information.
Thanks and Information.
Amol
Similar Messages
-
How to find the Open sale orders till date for given plant and material ?
Hi experts,
I have a requirement to calculate the open sale orders for a given plant and material. I have tried in VA05 wherein i can get only for the material and sales area combination. From the document nos obtained from VA05 i can then find the plant. But my question is how do i get the output of VA05 into my progra. (can i use submit for a module pool report ).
Also if ther is some other standard table or Function module to find the open sale orders till a given date ,it will be even more helpful....in which case i can drop the VA05 route.
Kindly help
Thanks in advance
AshwinHi Ashwin,
You can use SAP Tables VBAK and VBUP to get to know if the document is complete or not.
VBUK-GBSTK is the field that will give you the status of the Sales Order .
VBUK is used at header level , whereas VBUP is used for Item level.
So in your case what I would do is :
Get the Sales Orders that satisy the plant and material criteria from VBAP table , take this Sales Document numbers and go to VBUK or VBUP table to get the Sales Order Status.
If I need to find the open quantity as well I will link to VBFA table based on the document number.
Reward if helpful.
Thanks,
Imran -
How to find that a sales order for which there is delivery but no goods
Hi
How to find that a sales order for which there is delivery but no goods issue has been done i.e we have an open delivery for a sales order.
How in VBUK table can we find out with the sales order no .
Thanks in advancemake use of table VBFA.
Regards
Peram -
How to find who deletes sales order?
Dear All:
how to find who deleltes sales order ?and When ?
Anyhelp will be appreciated!
CynthiaYu
20081221
Edited by: yu Cynthia on Dec 21, 2008 4:19 AMHi Cynthia
Check in VA05 or VA05N list of sales orders also where you can see the status of the sales document
Apart from the above this standard report will help you to some extent
VEXP -Expiring SD Documents
Regards
Srinath
Edited by: sri nath on Dec 21, 2008 11:34 AM -
How to find the Obsolete function module in ECC 6.0
Hi Guys,
How we can find the all obsolete function in ECC 6.0, is any T-code to finding the obsolete function modules, or any other way to find.
Could you please help me.
Thanks,
Gourisankar.Hi Gouri,
If you are looking at determining whether a single FM is obsolete or not is by this method:
Go to FM in SE37 -> Goto Attributes Tab -> General Data section -> look above the Edit Lock field ... where SAP places the release status and date of the FM, if the FM is obsolete, the text Function Obsolete appears
This is one way of finding out one FM @ a time
However if you want to check on a mass scale, I dont have a SAP system here hence cant confirm, however, all FMs are stored in TFDIR database table. Please scroll through the fields of the DB table to check whether any field relates to release status or the like. If it does, then from SE16, you can put the value corresponding to "Obsolete" in the field and run to check all FMs.
Cheers,
Aditya -
How to Release the blocked Sales orders?
Hi Gurus,
Requirement: To Release the Blocked Salesorders
problem: find out any Tables and procedure to release blocked SO(allow to creating delivery for SO).
how to Customer CreditLimit and Tables of Theses...............
Thanks in Advance..
sivakumar.kasaHi..
AS per i knew......
how to know cutomer CreditLimit?
FD32,FD33...tcodes
how to release blocked Sales order?
VKM3
Wait for some other views -
How to find number of sales ordered for customers made
Dear All,
Is there a standard way in SAP to know, how many Sales Orders of a particular type did customers ordered in a certain time period.
I wanted to know ? Which customer orders most orders and who ordered least.
Thanks & Regards
VenkatHi Venkat,
Go to [SE16]. Enter the table name as VBAK. Enter the Sales Document Type and time period in the selection screen and execute the query. Save the output into a excel sheet using System -> List -> Save -> Local File.
In excel, you can sort and group the data as per your requiremet.
Regards
Nadarajah Pratheb -
How to Change the Existing Sales Order Transaction
Hi all,
I am trying to change some of the fields in Existing Sales Order Transaction.
Fields which i am trying to change are Ext. Reference number and Net Value.
I am using CRM_ORDER_MAINTAIN to do so but its not working. I dont know if some BADI can solve my purpose.
If anyone of you have done something like this please share with me and suggest me the solution for that.
Thanks in Advance.
Regards,
Manoj TiwariThat you should be able to do in ORDER_SAVE badi.
You will be able to find lots of discussions on usage of this badi here in this forum.
You need to call ORDER_READ, then call ORDER_MAINTAIN to change the values according to your requirement.
Regards,
Kaushal -
How to retrieve the ARCHIVED Sales order data
Hi All,
When issuing the output for the delivery, it is giving an error saying 'Sales Order XXXX does not exist' due to which the prices in the output were displayed as '0'. Reason for this can be that 'the order might have been archived'.
My requirement is,
1. If Sales Order doesnu2019t exist in data base then need to check if Sales order exists in archive data base.
2. If yes, take needed data from archive data base tables to calculate price. The logic of price calculation should be the same as for not archived Sales Orders.
Can anyone help me on this..?
Please tell me how to check whether the Sales order exists in the Archived database. Please share the table names(sample logic if possible) sothat I can use them in the report logic.
Please tell me how to pull the data from the archive database tables to calculate the price.
Thank you in advance.
Thanks & Regards,
Paddu.
Edited by: Paddu K on Feb 23, 2009 3:42 PM*& Form get_archive_data
* Fetch Archive Data
FORM get_archive_data .
CLEAR: g_read_handle, g_commit_cnt,
g_read_cnt, g_reload_cnt,it_rel_tab,it_bseg_a,it_bkpf_a,
it_bset_a, gt_result.
REFRESH: it_rel_tab[],it_bseg_a[],it_bkpf_a[],
it_bset_a[], gt_result[].
*Populating selection screen fields to field-symbols
PERFORM build_fs_select_options.
*Call FM as_api_read FI Data
CALL FUNCTION 'AS_API_READ'
EXPORTING
i_fieldcat = 'SAP_FI_DOC_002'
i_selections = ft_selections[]
* I_OBLIGATORY_FIELDS =
* I_MAXROWS =
IMPORTING
e_result = gt_result[]
EXCEPTIONS
parameters_invalid = 1
no_infostruc_found = 2
field_missing_in_fieldcat = 3
OTHERS = 4
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF NOT gt_result[] IS INITIAL.
*Sorting by KEY and Offset
SORT gt_result BY archivekey archiveofs.
*To delete duplicates
DELETE ADJACENT DUPLICATES FROM gt_result COMPARING archivekey
archiveofs.
*looping the internal table
LOOP AT gt_result.
*Get read handle for object
CALL FUNCTION 'ARCHIVE_READ_OBJECT'
EXPORTING
object = 'FI_DOCUMNT'
archivkey = gt_result-archivekey
offset = gt_result-archiveofs
IMPORTING
archive_handle = g_read_handle
EXCEPTIONS
OTHERS = 1.
IF NOT sy-subrc IS INITIAL.
MESSAGE ID sy-msgid TYPE 'I' NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
EXIT.
ENDIF.
IF sy-subrc = 0.
*Get Acoounting Document details
PERFORM object_read_opened
TABLES it_rel_tab
it_bseg_a
it_bkpf_a
* it_bset_a
* it_bsik_a
* it_bsak_a
it_bsid_a
it_bsad_a
* it_bsec_a
USING g_read_handle
l_archobj
g_commit_cnt
g_read_cnt
g_reload_cnt
ENDIF.
*close the file.
CALL FUNCTION 'ARCHIVE_CLOSE_FILE'
EXPORTING
archive_handle = g_read_handle
EXCEPTIONS
internal_error = 1
wrong_access_to_archive = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE i004." 'Unable to close archive session'.
EXIT.
ENDIF.
ENDLOOP.
ELSE.
MESSAGE i000 WITH 'No data found for Archived data'(095).
EXIT.
ENDIF.
*Start of Changes by GTHATIKONDA on 10/17/2008 #ECDK902204
IF NOT it_bkpf_a[] IS INITIAL.
SORT it_bkpf_a BY belnr.
DELETE ADJACENT DUPLICATES FROM it_bkpf_a COMPARING belnr.
DELETE it_bkpf_a WHERE budat GT p_budat. "#ECDK902206
ENDIF.
*Start of Changes by GTHATIKONDA on 10/17/2008 #ECDK902206
IF it_bkpf_a[] IS INITIAL.
MESSAGE i000 WITH 'No data found for Archived data'(095).
ENDIF.
*End of Changes by GTHATIKONDA on 10/17/2008 #ECDK902206
IF NOT it_bseg_a[] IS INITIAL.
SORT it_bseg_a BY belnr gjahr buzei.
DELETE ADJACENT DUPLICATES FROM it_bseg_a COMPARING
belnr gjahr buzei.
ENDIF.
*End of Changes by GTHATIKONDA on 10/17/2008 #ECDK902204
ENDFORM. " get_archive_data
*& Form build_fs_select_options
FORM build_fs_select_options .
REFRESH: ft_selections.
*Comapny code
APPEND INITIAL LINE TO ft_selections ASSIGNING <fw_selections>.
<fw_selections>-fieldname = 'BUKRS'.
APPEND INITIAL LINE TO <fw_selections>-selopt_t ASSIGNING <lw_selopt>.
MOVE p_bukrs TO <lw_selopt>-low.
MOVE 'I' TO <lw_selopt>-sign.
MOVE 'EQ' TO <lw_selopt>-option.
*Customer
APPEND INITIAL LINE TO ft_selections ASSIGNING <fw_selections>.
<fw_selections>-fieldname = 'KUNNR'.
LOOP AT s_kunnr.
APPEND INITIAL LINE TO <fw_selections>-selopt_t
ASSIGNING <lw_selopt>.
MOVE-CORRESPONDING s_kunnr TO <lw_selopt>.
ENDLOOP.
*Start of changes by GTHATIKONDA on 16/10/2008 #ECDK902192
**Customer Group
* append initial line to ft_selections assigning <fw_selections>.
* <fw_selections>-fieldname = 'KTOKD'.
* loop at s_ktokd.
* append initial line to <fw_selections>-selopt_t
* assigning <lw_selopt>.
* move-corresponding s_ktokd to <lw_selopt>.
* endloop.
*End of changes by GTHATIKONDA on 16/10/2008 #ECDK902192
*Profit Center
APPEND INITIAL LINE TO ft_selections ASSIGNING <fw_selections>.
<fw_selections>-fieldname = 'PRCTR'.
LOOP AT s_prctr.
APPEND INITIAL LINE TO <fw_selections>-selopt_t
ASSIGNING <lw_selopt>.
MOVE-CORRESPONDING s_prctr TO <lw_selopt>.
ENDLOOP.
*Commented #ECDK902210
**Key Date
* append initial line to ft_selections assigning <fw_selections>.
* <fw_selections>-fieldname = 'BUDAT'.
* append initial line to <fw_selections>-selopt_t assigning <lw_selopt>
* move p_budat to <lw_selopt>-low.
* move 'I' to <lw_selopt>-sign.
* move 'EQ' to <lw_selopt>-option.
*Aging Period1
APPEND INITIAL LINE TO ft_selections ASSIGNING <fw_selections>.
<fw_selections>-fieldname = 'ANZTA'.
APPEND INITIAL LINE TO <fw_selections>-selopt_t ASSIGNING <lw_selopt>.
MOVE p_ag1 TO <lw_selopt>-low.
MOVE 'I' TO <lw_selopt>-sign.
MOVE 'EQ' TO <lw_selopt>-option.
*Aging Period2
*Start of changes by GTHATIKONDA on 16/10/2008 #ECDK902192
* append initial line to ft_selections assigning <fw_selections>.
* <fw_selections>-fieldname = 'ANZTA'.
*End of changes by GTHATIKONDA on 16/10/2008 #ECDK902192
APPEND INITIAL LINE TO <fw_selections>-selopt_t ASSIGNING <lw_selopt>.
MOVE p_ag2 TO <lw_selopt>-low.
MOVE 'I' TO <lw_selopt>-sign.
MOVE 'EQ' TO <lw_selopt>-option.
*Aging Period3
*Start of changes by GTHATIKONDA on 16/10/2008 #ECDK902192
* append initial line to ft_selections assigning <fw_selections>.
* <fw_selections>-fieldname = 'ANZTA'.
*End of changes by GTHATIKONDA on 16/10/2008 #ECDK902192
APPEND INITIAL LINE TO <fw_selections>-selopt_t ASSIGNING <lw_selopt>.
MOVE p_ag3 TO <lw_selopt>-low.
MOVE 'I' TO <lw_selopt>-sign.
MOVE 'EQ' TO <lw_selopt>-option.
*Aging Period4
*Start of changes by GTHATIKONDA on 16/10/2008 #ECDK902192
* append initial line to ft_selections assigning <fw_selections>.
* <fw_selections>-fieldname = 'ANZTA'.
*End of changes by GTHATIKONDA on 16/10/2008 #ECDK902192
APPEND INITIAL LINE TO <fw_selections>-selopt_t ASSIGNING <lw_selopt>.
MOVE p_ag4 TO <lw_selopt>-low.
MOVE 'I' TO <lw_selopt>-sign.
MOVE 'EQ' TO <lw_selopt>-option.
*Aging Period5
*Start of changes by GTHATIKONDA on 16/10/2008 #ECDK902192
* append initial line to ft_selections assigning <fw_selections>.
* <fw_selections>-fieldname = 'ANZTA'.
*End of changes by GTHATIKONDA on 16/10/2008 #ECDK902192
APPEND INITIAL LINE TO <fw_selections>-selopt_t ASSIGNING <lw_selopt>.
MOVE p_ag5 TO <lw_selopt>-low.
MOVE 'I' TO <lw_selopt>-sign.
MOVE 'EQ' TO <lw_selopt>-option.
ENDFORM. " build_fs_select_options
*& Form object_read_opened
* To Fetch Arichive Data
FORM object_read_opened TABLES it_rel_tab
it_bseg_a
it_bkpf_a
* it_bset_a
* it_bsik_a
* it_bsak_a
it_bsid_a
it_bsad_a
* it_bsec_a
USING value(g_read_handle) LIKE sy-tabix
value(l_archobj) LIKE arch_def-object
value(g_commit_cnt) LIKE arch_usr-arch_comit
g_read_cnt TYPE i
g_reload_cnt TYPE i.
DATA: BEGIN OF table_wa ,
table LIKE arch_stat-tabname,
END OF table_wa.
DATA: lit_data(2048) TYPE c OCCURS 1 WITH HEADER LINE.
DATA: l_structure LIKE arch_stat-tabname,
l_lin TYPE i.
CLEAR: it_table_org1,lit_struc,it_table_org2,table_wa,it_rel_tab.
REFRESH: it_table_org1[],lit_struc[],it_table_org2[],it_rel_tab[].
CLEAR: g_duprec,g_read_cnt,g_reload_cnt,g_object_cnt.
*Read data from the infostructure
DO.
ADD 1 TO g_object_cnt.
CLEAR l_structure.
CALL FUNCTION 'ARCHIVE_GET_NEXT_RECORD'
EXPORTING
archive_handle = g_read_handle
IMPORTING
record = lit_data
* RECORD_CURSOR =
* RECORD_FLAGS =
record_structure = l_structure
* RECORD_LENGTH =
* RECORD_REF =
EXCEPTIONS
end_of_object = 1
internal_error = 2
wrong_access_to_archive = 3
OTHERS = 4
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
EXIT.
ENDIF.
IF NOT l_structure IS INITIAL.
table_wa-table = l_structure.
APPEND table_wa TO it_rel_tab.
ENDIF.
APPEND lit_data.
CLEAR l_lin.
FIELD-SYMBOLS: <fs_struc> TYPE c.
CASE l_structure.
*BKPF data
WHEN 'BKPF'.
ASSIGN it_bkpf_a TO <fs_struc> CASTING.
<fs_struc> = lit_data.
APPEND it_bkpf_a.
*BSID data
WHEN 'BSID'.
ASSIGN it_bsid_a TO <fs_struc> CASTING.
<fs_struc> = lit_data.
APPEND it_bsid_a.
*BSAD data
WHEN 'BSAD'.
ASSIGN it_bsad_a TO <fs_struc> CASTING.
<fs_struc> = lit_data.
APPEND it_bsad_a.
*BSEG data
WHEN 'BSEG'.
ASSIGN it_bseg_a TO <fs_struc> CASTING.
<fs_struc> = lit_data.
APPEND it_bseg_a.
ENDCASE.
REFRESH lit_data.
CLEAR g_object_cnt.
ENDDO.
ENDFORM. " object_read_opened
*& Form get_bsid_bsad_archive_data
*If Exclude Spl. GL Trnasaction is initial get BSID BSAD Archive data *
FORM get_bsid_bsad_archive_data .
*Work Area
DATA: wa_bsid TYPE type_bsid.
*Reading BSAD Archive internal table
* loop at it_bsad_a where bukrs eq p_bukrs
*Start of changes by GTHATIKONDA on 10/14/2008 #ECDK902180
*Commented by GTHATIKONDA on 10/17/2008 #ECDK902204
LOOP AT it_bkpf_a WHERE bukrs = p_bukrs AND
budat LE p_budat. "#ECDK902206
*End of changes by GTHATIKONDA on 10/14/2008 #ECDK902180
LOOP AT it_bseg_a WHERE bukrs EQ p_bukrs AND
belnr EQ it_bkpf_a-belnr AND
gjahr EQ it_bkpf_a-gjahr AND
augdt GT p_budat AND
* koart eq 'D' and
kunnr IN s_kunnr AND
prctr IN s_prctr.
*Changes by GTHATIKONDA on 10/17/2008 #ECDK902204
* loop at it_bkpf_a where budat le p_budat."#ECDK902206
*Move corresponding fiels
MOVE-CORRESPONDING it_bseg_a TO wa_bsid.
wa_bsid-blart = it_bkpf_a-blart.
wa_bsid-budat = it_bkpf_a-budat.
wa_bsid-bldat = it_bkpf_a-bldat.
APPEND wa_bsid TO i_bsad.
CLEAR wa_bsid.
ENDLOOP.
ENDLOOP.
IF NOT i_bsad[] IS INITIAL.
APPEND LINES OF i_bsad TO i_bsid.
ENDIF.
*Start of Changes by GTHATIKONDA on 10/17/2008 #ECDK902206
IF NOT i_bsid[] IS INITIAL.
SORT i_bsid BY belnr.
*Commenting this logic by GTATIKONDA on 10/31/2008 #ECDK902245
* delete adjacent duplicates from i_bsid comparing belnr.
ENDIF.
*End of Changes by GTHATIKONDA on 10/17/2008 #ECDK902206
ENDFORM. " get_bsid_bsad_archive_data
*Reading BSAD Archive internal table
* loop at it_bsad_a where bukrs eq p_bukrs
*Start of changes by GTHATIKONDA on 10/14/2008 #ECDK902180
*Commented by GTHATIKONDA on 10/17/2008 #ECDK902204
LOOP AT it_bkpf_a WHERE bukrs = p_bukrs AND "#ECDK902206
budat LE p_budat.
*End of changes by GTHATIKONDA on 10/14/2008 #ECDK902180
LOOP AT it_bseg_a WHERE bukrs EQ p_bukrs AND
belnr EQ it_bkpf_a-belnr AND
gjahr EQ it_bkpf_a-gjahr AND
kunnr IN s_kunnr AND
umskz EQ space AND
augdt GT p_budat AND
prctr IN s_prctr.
*Changes by GTHATIKONDA on 10/17/2008 #ECDK902204
* loop at it_bkpf_a where budat le p_budat. "#ECDK902206
*Move corresponding fiels
MOVE-CORRESPONDING it_bseg_a TO wa_bsid.
wa_bsid-blart = it_bkpf_a-blart.
wa_bsid-budat = it_bkpf_a-budat.
wa_bsid-bldat = it_bkpf_a-bldat.
APPEND wa_bsid TO i_bsad.
CLEAR wa_bsid.
ENDLOOP.
ENDLOOP.
IF NOT i_bsad[] IS INITIAL.
APPEND LINES OF i_bsad TO i_bsid.
ENDIF. -
How to amend the seeded sales order lines workflow
Hi,
I'd like to amend the workflow of order lines in sales order form in Order Management
I want to clear the schedule ship date field because
it is auto deafulted with sysdate
How to download the seeded workflow ?
How can i determien the needed amendment ?
Any Guide PLS ?
ThanksYou can download the workflow using the WFLOAD command - see MOS Doc 1569004.1
You will need Workflow Builder on a Windows PC to modify the workflow - see MOS Doc 1461991.1 and MOS Doc 125067.1 -
How to trace the DO(Sales Order)
Dear Forum,
The process is DO(Sales Order)--->Delivery Order(OBD).
I have deleted the Delivery.
How to get the Sales Order number aginst this Delivey Order.
Thanks in advance !!!!!Use change pointers
http://help.sap.com/saphelp_nw04s/helpdata/en/12/83e03c19758e71e10000000a114084/frameset.htm
Activate
http://help.sap.com/saphelp_nw04/helpdata/en/0f/9d563cf19bcb43e10000000a11405a/frameset.htm
Regards,
Prateek -
How to find status of sales order without OBJNR
Hi All,
Could you please let me know how to find staus of a sales order without VBAK-OBJNR, sales order type is debit memo request(VBAK-AUART = 'L'), it has no status icon in status tab, and VBAK-OBJNR is empty, but 'Rejection status' is showing as 'Everything rejected' in its status tab.
Thanks & regards
RKHI,
I just verified with other statuses of sales orders, it is confirmed,
Many thanks.
Regards
RK -
How to get the ammendment sales order number and original sales order no?
Hello sir's,
Please tell me the table for ammendment(revised) sales order number and original sales order no.
Thanks in advance,
vikramSolved
-
How to find cancel of sales order data?
hii friends,
now i am creating a sales register so i have need to calculate the value of cancel of sales order and return of sales material. sp plz give me table name and bill type for sales return and cancel.Table for Sales Return is ORDN for header and RDNX for lines. As for canceled Sales Order, there are no special table but the same ORDR with field value for CANCELED as 'Y'.
Thanks,
Gordon -
Can anyone tell me how to insert the new sales order lines using API.
Hi,
I am trying to Insert new sales order lines using oe_order_pub.Process_Order API, but i am unable to insert.
Help me on this.
Thanks in Adavance
Shravan Kumar.Hi,
Have you checked this link?
http://download-west.oracle.com/docs/cd/B25516_08/current/acrobat/115omapi.zip
it has extensive information on OM APIs
Regards
Prashant Pathak
Maybe you are looking for
-
My iMac can't find my network/TM but wireless works for 3 other computers
All of a sudden my Mac couldn't connect to my wireless network. I ran the Network Diagnostic and my network can't be found...but my two PCs and my iBook in the house are connected to the network and are working...I tried Airport Utility but it doesn'
-
Why does Apple charge for spell check while MS Word offers it for free?
I have been using MS Office for Mac until recently when I could not open PowerPoint files sent to me. I bought iWork '08 to remedy that and right after I installed it, Spell Catcher said my trial period was up and that I could buy it. Of course, I'm
-
Recovery of a lost datafile without backup
Its the demo for recovery of a lost datafile without backup,but you should have database in archivelog in order to make complete recovery,otherwise in noarchivelog mode you may lose some data.Every steps is self explainatory so i feel need'nt to add
-
Hi Friends, I'm refreshing workbook,but i'm not getting <b>selction-screen</b>.I created few varibles but when i refresh through the <i>query</i> i'm getting <b>selection-screen option</b>. Plz let me know where i have to change settings. Thanks, Vij
-
I enable the Java Console in the "Internet Options" from my IE Browser. And i can see it in my View Option. But when click on the option, it doesn't show up! Could u tell me why? Thanks, Bick