How to findout for which product category extended classic is activated?

Dear experts,
How to find out for which product category extended classic is activated? I am working in a test system. In spro settings, Cross aplication basic settings -> activate extended classic is unticked.
I see, the system allows me to create a Extended classic PO against a product category 001.
The product category has same ECC backend  system as target and source system.
Is there any BADI implementation?
regards,
Ranjan

Hi
ECS - flag activated - means Extended classic scenario.
target determine badi - helps to create a PO in desired place.
source system and tatget system logical entry sjhown means
PRODUCT CATEGORY - created in Backend system and follow on docuemnts also created in ECC system - so it could be Classic .
as jay said determine log system badi used for DECOUPLE scenario ( Classic as well as ECS) .
some times unless we study the system in depth, hart to findout what is exact techniacl scenario.
or you can find out what type of POs are in BBP_PD for all PO means ECS.
This SRM tools can be used for many purposes.
some customers uses for Supplier registration only,
some one is using for only Bid invitation and Bid and selecting the vendor only
some one use for all non stock procurment only.
some one use for only free text - ....
taste vary in all business.
you must give more details like what are the Business docuement s are created in SRM
Muthu

Similar Messages

  • Determine of Tax Code for Country/Product Category - Table handling

    Dear Experts,
    in SRM 7.0, CS, i am facing the following requirement regarding tax codes:
    We have users from different countries using SRM. These different countries have different tax codes that are to be used for legal reasons.
    My question is, how i can achieve a system behaviour, by which in the shopping cart, the correct tax codes gets selected automatically, based on the country of the user, who is creating the shopping cart.
    Question 1:
    Is it correct to assume, that this requirement can be achieved by maintaining the "Determine of Tax Code for Country/Product Category" - Table?
    Q2:
    What is the purpose of the 1st column of the above mentioned table, "Domestic/International Indicator"? Can it be left blank?
    Q3:
    Is it possible to fill in the values for the field "Country" BUT to leave the field "Category ID" empty???The reason for asking it, that otherwise several hundreds entries would have to be maintaind manaully...
    Q4:
    From where in the shopping cart or ppoma settings is the system fetching the Country code, in order to be able to use it in the table? Is there any specific attribute maintenance that has to be taken care of, so the above mentioned table can be used (e.g. delivery address, including the country information)?
    Thank you very much for your help in understanding the topic.

    Hi
    Here are my responses to your questions:
    Question 1:
    Is it correct to assume, that this requirement can be achieved by maintaining the "Determine of Tax Code for Country/Product Category" - Table?
    Answer -  If you have a requirement where different countries have different tax codes, then you do need this confiugration. Otherwise Configuraiton in Enter Tax Code  are sufficient.
    Q2:
    What is the purpose of the 1st column of the above mentioned table, "Domestic/International Indicator"? Can it be left blank?
    Answer - Sometimes you have different codes for International and Domestic purchases for a product Category. IN those situations you can select Domestic/International field to differentiate btw tax codes. Otherwise this field can be left blank
    Q3:
    Is it possible to fill in the values for the field "Country" BUT to leave the field "Category ID" empty???The reason for asking it, that otherwise several hundreds entries would have to be maintaind manaully...
    Answer - No, if you enter country, then Category Id field is mandatory. You may enter * in case you dont have multiple backend systems. otherwise you will ve to ve individual entries for each category and backend system.
    Q4:
    From where in the shopping cart or ppoma settings is the system fetching the Country code, in order to be able to use it in the table? Is there any specific attribute maintenance that has to be taken care of, so the above mentioned table can be used (e.g. delivery address, including the country information)?
    Answer - It is picked up from the address of the user where is will receive goods. and Domestic/International will be decided based on Vendor address with reference to thta address.
    I hope my responses clarify your doubts.
    Regards
    Virender Singh

  • How can I control the Product Category in the Pre-select screen

    Dear ,my expert :
       I  work in ROS scenario . In my case ,the supplier can select Product Category A, Product Category B,and Product Category C when they  filled the data in the  registration scren . And the purchaser A just is responsibility for the Product Category A ,and the purchaser B ,C are the same situation .
      So ,my question is :
       1,How can I control the Product Category in the Pre-select screen? I mean that the Purchaser A can just select the   Product Category A in the Pre-select screen .
       2,You know the supplier select two category  is one BP in the system ,So if the purchaser A accepe the supplier ,the purchaser B will find the status is "accepted ",So the purchaser B will be confused about it .
       SO ,in my case ,any one has the suggestions ,any link welcome .
       Bestregards
      alex

    Hi Alex,
    As per standard SRM solution, this is not supported. Purchasers who accept new suppliers, accept them on the whole and not for any specific product category. There is no such thing as Purchaser being responsible for specific prod category in ROS.
    What you could do however is to build a custom workflow to achieve it. You could have category approvers after the purchaser has accepted the supplier. Based on the category provided by the supplier in the reg form, you could route these suppliers to appropriate category approvers.
    Regards,
    Nikhil

  • SRM7.0 Multiple  G/L account assignment for a product category

    Hi All,
    In SRM7.0 , it is possible to maintain multiple G/L accounts for a prodict category and account assignment combination. For example , for a product Category XX and account assignment CC , we can maintain more than one G/L account with one G/L as default. While creating the Shopping Cart , the G/L account is defaulted. However when we do F4 search on the G/L , then system is bringing all the G/L accounts from the backend through the search help from ECC. In that case what is the use of maintaining multiple G/L accounts in the SRM configuration? Is there any other config that is reqd? We thought system would restrict to those G/L account that are maintained in the config.
    Thanks
    Sukumar

    Dear Poster,
    As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
    Best Regards,
    SDN SRM Moderation Team

  • How to find for which select statement performance is more

    hi gurus
    can anyone suggest me
    if we have 2 select statements than
    how to find for which select statement performance is more
    thanks&regards
    kals.

    hi check this..
    1 .the select statement in which the primary and secondary keys are used will gives the good performance .
    2.if the select statement had select up to  i row is good than the select single..
    go to st05 and check the performance..
    regards,
    venkat

  • APODP How Forecast model for different product can be define ?

    Hi Gurus,
                 I had forecast 1000 products and in that thousand products i have 300 slow moving products and 700 fast moving products.
    I had taken Linear regression model for this products and run the forecast. My question is i wanted to forecast 300 slow moving products with Seasonal Model , can anyone please mention how we can forecast 1000 products with two different forecast models?
    Waiting for your answers
    Regards & Thanks
    Raj

    Hi Raj,
              A little concept clarification here. The was forecasting model works is"
    1. You create a forecasting model giving a key figure for which you want to forecast and assign a univariae or MLR or composite profile to it assigning a key figure which you want to use as history and a statistical model. (TCODE: MC96B)
    2. Create a selection profile in interactive planning screen (TCODE: SDP94). Select all the products you want to plan for in this profile along with other selections.
    3. Assign forecasting profile to the profile. This way you can assign different forecasting models to different profiles.
    In your case,
    1.Create two forecasting profiles one with Linear regression and the other with Seasonal model.
    2. Create 2 selection profiles one with the 300 products and other with the other 700 products.
    3. Assign Linear regression to one selection profile and seasonal model to another profile.
    Hope this elaborates the solution. Please let us know if you have any other questions.
    Thanks.

  • Determine tax code for country/product category

    Hi all!
    We try to define a specific tax-code for a specific product group. However, this does not work for any product group we are testing - we need to have the product group field blank (no entry). If the field is blank the tax determination is correct.
    I know that product group must be assigned with a country key - but we have tried this and all other combinations, without success.
    Any suggestions?
    brgs ziggy

    Found the reason. Link to source system was missing, as product group was entered manually. Search and select product group using F4 !

  • BADI for Reservation Creation in Extended Classic

    Dear SRM Gurus,
    System: SRM Server 5.5
    Technical Scenario: Extended Classic.
    We have requirement to create RESERVATION if stock exist for that particular item, and not based on product category , in R/3.
    I need help as to which BADI is to be used ?
    What should be the logic ?
    Thanking you in advance,
    Best Regards,
    Anil Rajpal.

    Hi Anil,
    I you want to create reservation, you have first to switch from ECS to classic scenario through BBP_EXTLOCALPO_BADI then you have to implement BBP_TARGET_OBJTYPE badi to determine the criteria to create a reservation in your backend.
    Kind regards,
    Yann

  • How to check on which APs a wlan profile is activated on WLC4402

    Hello,
    we use a wlc4402 and several wlan profiles which are activated on different access-points (wlan override).
    Does anybody know if there is a possibility to see a summary list of the aps on which a certain wlan profile is activated?
    Best Regards,
    Thorsten

    Hello,
    I tested it but did not get the output I am looking for.
    What I am looking for is a list of all wlan profiles and for each wlan profile a list of all ap where it's activated, e.g.:
    wlan profile 1
    ap1
    ap2
    ap3
    wlan profile 2
    ap2
    ap5
    ap7
    Does anybody further know how I can set the cli terminal length to 0 so that there is no page break (as term len 0 in ios)?
    Regards,
    Thorsten

  • P-card  process available for SRM 5.0 extended classic scenario

    Hello,
    I didn't find the information, so I'm posting this message.
    Is  the p-card functionality available for the extended classic scenario in SRM 5.0 ?

    Hi,
    Use of Procurement Cards are supported in Extended calssic scenario from SRM 2007 ..onwards
    HTH
    Rajesh

  • How to automatically attach document in PO - Extended Classic

    Hi,
    We are using the SRM 4.0 - extended classic scenario. We are creating the PO via sourcing (Manually converting SC into PO by assigning the Vendor).
    In our scenario, the Terms and Conditions have to be attached to PO automatically (without User need to browse and upload them).
    Is there a BAdI to attach the Document to the PO automatically.
    Regards,
    Rahul

    Hello Pras,
    Rahul is not trying to transfer attachments to R/3, but to create automaticaly an attachment for the PO.
    Rahul, the smartform + CUF solution is the simplest and cheapest solution, and the less consumming in DB space (no physical document stored).
    If you want to handle it via an attachment, you must code CHANGE or SAVE BADI to add an attachment at header level, is PO is created from transaction BBPSOCO01.
    You would have to store this document in SRM KPRO, as a document model, and store its ID somewhere.
    So when creating the new attachement, you can retrieve it and duplicate it.
    Another approach, to avoid replicating N times the same document, is to handle the PO header CUF only, and interprete this CUF when editing the PO. In this edition step, you could then read model and add it in your PO output.
    You could also just create a new attachment link without creating a new physical document by just linking the document model to your PO via an attachment link in BBP_PDATT. To do so, just add a new entry in attachment internal table in CHANGE BADI, using the LOIO Object ID.
    For the last solutions, you will need some skills around document storage in SRM (LOIO, PHIO, KPRO...).
    Rgds
    Christophe

  • Sharing attachment documents (e.g. for P.O.) in extended classic scenario

    Dear SAP SRM gurus
    in the SAP SRM extended classic scenarios (rel. 7.0) attachments of Purchase Order can be viewed also in the backend SAP ECC 6.0  as per SAP Notes n. 1582690 and 1057932 . But I am not sure if attachments are phiysically transmitted from SAP SRM to ECC or only document url is passed even though, as per SAP note n.1357551 it seems that only url is passed.
    My customer wants to know if there is the possibility of not replicating them.
    Any suggestions will be appreciated.
    Many thanks in advance
    Best regards
    Gianluigi Brenna
    Edited by: GIANLUIGI BRENNA on Jul 29, 2011 2:56 PM
    Edited by: GIANLUIGI BRENNA on Jul 29, 2011 3:08 PM

    Hello,
    In extended classic scenario the attachments arent transferred to ECC as the source document is in SRM. The document in ECC is only a copy and it cant be modified also.
    If we have to transfer attachments, then probably implicit enhancements to standard logic might be needed.
    Regards,
    Prasanna

  • How to find out which URL Category (many) URLs belong to - via script

    Hi,
    It's about AsyncOS7.5 on WSA S360.
    After implementing URL Filtering I have following problem:
    If I'd like to access amazon.de for example, there are plenty of other Web Pages  referenced too.
    Some of them belong to allowed URL Categories and others to forbiden ones which makes the visited URL
    not show up properly.
    Since some times there are about 15 URLs affected I don't like to test each of them with the Policy Tracer
    in order to find out which ones are allowed and care for the others.
    Instead I thought of using a command or a script with a list of  URLs  for a much faster solution.
    Is there any such posibility?
    Thanks
    Jannis

    Hi Jannis,
    If you only would like to find the category of multiple URLs in one go so you can then compare to your policy (so you know which one is allowed and which one is blocked), you can use this portal (Cisco CCO ID is required to log in).
    https://securityhub.cisco.com/web/submit_urls
    Under Lookup or Submit URLs tab you can enter multiple URLs  and select the AsyncOS version to get their categorizations.
    On the scripting side, maybe it can be done outside the WSA so your client will send the request of the multiple URLs to the WSA and WSA returns their categories (with block page or response from WSA).
    Perhaps a scripting master here can add more information to your query.
    Thanks,
    Donny

  • How to findout rows which are not null ?

    Hi friends,
    Can anyone tell me how to find out the no of rows which is having full data in each column (not null) ?
    Ex:- TEST_TABLE having 1000 columns and lakes of rows.
    myQuestion:- I need to find the no of rows which are filled with 1000 columns filled with not null data.
    Thanks in Advacne.
    Kishore.

    Hello
    You're just going to have to write the query with IS NOT NULL on each column. This will help generate the predicates for the WHERE clause to save quite a bit of typing...
    SELECT
        ' AND '||column_name||' IS NOT NULL'
    FROM
        all_tab_columns
    WHERE
        table_name = 'TEST_TABLE'You can take the output and add that to
    SELECT COUNT(*) FROM test_table WHERE 1=1 HTH
    David

  • How SAP Charge for their product ?

    Hi All,
    Today I and My friend had a little fiery chat on how sap charge their customers for R/3 and so on...?
    1. For product license and number of users license (or),
    2. For product license alone (or),
    3. For product license and number of users license along with number of sapgui s installed in the network. (or),
    4. For product license and number of sapgui s installed (or),
    5. For number of users license (or),
    6. For number of users license along with number of sapgui s installed.
    Please let us know.
    Thanks in advance.

    I would recommend you contact your account rep for the answer.

Maybe you are looking for