How to fix iOS 7.0.2 dictionary (define) function?

Hi there,
I have installed iOS 7.0.2 to my iPad Mini, but dictionary is not working anymore at iBooks and other apps.
Actually I have downloaded some of the dictionaries from MANAGE section, but after touching several times to X bottom, all dictionaries just freezed and not working anymore.
I think, "Apple should hasten to fix iOS 7 dictionary function"!!!!
Could anybody know how to fix this problem? Please share your experience.....
thanks in advance,

(A) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
(B) Reset all settings
Settings>General>Reset>Reset all settings
Note: Data will not be affected but settings will be reset.

Similar Messages

How to fix iOS 7.1.1 wallpaper without reduce motion?

Does anybody know how to fix the wallpaper on iPad running iOS 7.1.1 without turning on reduce motion? And it would be absolutely great if someone has a free app which performs this.
This would be really helpful.

This is fixed in iOS 7.1 and is quite easy to do!
1. Make sure Reduce Motion is turned OFF
2. Go to Settings > Wallpaper & Brightness
3. Tap your wallpaper
4. In the bottom right tap Perspective Zoom: On to turn it off
5. Tap the appropriate Set button

IOS 7 and the disappearing "define" function?

After upgrading my iPhone 5, bought about 60 days ago, to iOS7, my define function seems unsupported.
There was a iPhone 5 discussion about it, and I tried the GENERAL/INTERNATIONAL/LANGUAGE fix, but could not get any of the listed dictionaries to download.
Any iOS 7 gurus out there?
thanks

When you press define, an empty window pops up. If you press manage in that window, a list of dictionaries is displayed that you can install from. Hope this helps :)

How to resolve the error while using user defined function.

EPN Assembly file
<?xml version="1.0" encoding="UTF-8"?>
<beans xmlns="http://www.springframework.org/schema/beans"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:osgi="http://www.springframework.org/schema/osgi"
xmlns:wlevs="http://www.bea.com/ns/wlevs/spring"
xmlns:jdbc="http://www.oracle.com/ns/ocep/jdbc"
xmlns:spatial="http://www.oracle.com/ns/ocep/spatial"
xsi:schemaLocation="
http://www.springframework.org/schema/beans
http://www.springframework.org/schema/beans/spring-beans.xsd
http://www.springframework.org/schema/osgi
http://www.springframework.org/schema/osgi/spring-osgi.xsd
http://www.bea.com/ns/wlevs/spring
http://www.bea.com/ns/wlevs/spring/spring-wlevs-v11_1_1_3.xsd
http://www.oracle.com/ns/ocep/jdbc
http://www.oracle.com/ns/ocep/jdbc/ocep-jdbc.xsd
http://www.oracle.com/ns/ocep/spatial
http://www.oracle.com/ns/ocep/spatial/ocep-spatial.xsd">
     <wlevs:event-type-repository>
          <wlevs:event-type type-name="TestEvent">
               <wlevs:class>com.bea.wlevs.event.example.FunctionCEP.TestEvent</wlevs:class>
          </wlevs:event-type>
     </wlevs:event-type-repository>
     <wlevs:adapter id="InputAdapter"
          class="com.bea.wlevs.adapter.example.FunctionCEP.InputAdapter">
          <wlevs:listener ref="inputStream" />
     </wlevs:adapter>
     <wlevs:channel id="inputStream" event-type="TestEvent">
          <wlevs:listener ref="processor" />
     </wlevs:channel>
     <wlevs:processor id="processor">
          <wlevs:listener ref="outputStream" />
          <wlevs:function function-name="sum_fxn" exec-method="execute">
          <bean>com.bea.wlevs.example.FunctionCEP.TestFunction</bean>
          </wlevs:function>
     </wlevs:processor>
     <wlevs:channel id="outputStream" event-type="TestEvent">
          <wlevs:listener ref="bean" />
     </wlevs:channel>
     <bean id="bean" class="com.bea.wlevs.example.FunctionCEP.OutputBean">
     </bean>
</beans>
Event class
package com.bea.wlevs.event.example.FunctionCEP;
public class TestEvent {
     private int num_1;
     private int num_2;
     private int sum_num;
     public int getSum_num() {
          return sum_num;
     public void setSum_num(int sumNum) {
          sum_num = sumNum;
     public int getNum_1() {
          return num_1;
     public void setNum_1(int num_1) {
          this.num_1 = num_1;
     public int getNum_2() {
          return num_2;
     public void setNum_2(int num_2) {
          this.num_2 = num_2;
Adapter class
package com.bea.wlevs.adapter.example.FunctionCEP;
import com.bea.wlevs.ede.api.RunnableBean;
import com.bea.wlevs.ede.api.StreamSender;
import com.bea.wlevs.ede.api.StreamSource;
import com.bea.wlevs.event.example.FunctionCEP.TestEvent;
public class InputAdapter implements RunnableBean, StreamSource {
private StreamSender eventSender;
public InputAdapter() {
super();
public void run() {
     generateMessage();
private void generateMessage() {
     TestEvent event = new TestEvent();
     event.setNum_1(10);
     event.setNum_2(20);
     eventSender.sendInsertEvent(event);
public void setEventSender(StreamSender sender) {
eventSender = sender;
public synchronized void suspend() {
Output Bean class
package com.bea.wlevs.example.FunctionCEP;
import com.bea.wlevs.ede.api.StreamSink;
import com.bea.wlevs.event.example.FunctionCEP.TestEvent;
import com.bea.wlevs.util.Service;
public class OutputBean implements StreamSink {
     public void onInsertEvent(Object event) {
          System.out.println("In Output Bean");
          TestEvent event1 = new TestEvent();
          System.out.println("Num_1 is :: " + event1.getNum_1());
          System.out.println("Num_2 is :: " +event1.getNum_2());
          System.out.println("Sum of the numbers is :: " +event1.getSum_num());
Function Class
package com.bea.wlevs.example.FunctionCEP;
public class TestFunction {
     public Object execute(int num_1, int num_2)
          return (num_1 + num_2);
config.xml file
<?xml version="1.0" encoding="UTF-8"?>
<wlevs:config xmlns:wlevs="http://www.bea.com/ns/wlevs/config/application"
xmlns:jdbc="http://www.oracle.com/ns/ocep/config/jdbc">
     <processor>
          <name>processor</name>
               <rules>
               <view id="v1" schema="num_1 num_2">
                    <![CDATA[
                         select num_1, num_2 from inputStream
                    ]]>
               </view>
               <view id="v2" schema="num_1 num_2">
               <![CDATA[
               select sum_fxn(num_1,num_2), num_2 from inputStream // I am getting error when i am trying to call this function
               ]]>
               </view>
               <query id="q1">
                    <![CDATA[
                         select from v2[now] as num_2*     // Showing error while accessing the view also               ]]>
               </query>
          </rules>
     </processor>
</wlevs:config>
Error I am getting is :
Invalid statement: "select >>sum_fxn<<(num_1,num_2),age from inputStream"
Description: Invalid call to function or constructor: sum_fxn
Cause: Probable causes are: Function name sum_fxn(int,int) provided is invalid, or arguments are of
the wrong type., or Error while handling member access to complex type. Constructor sum_fxn of type
sum_fxn not found. or Probable causes are: Function name sum_fxn(int,int) provided is invalid, or
arguments are of the wrong type., or Error while handling member access to complex type.
Constructor sum_fxn of type sum_fxn not found.
Action: Verify function or constructor for complex type exists, is not ambiguous, and has the correct
number of parameters.
I have made a user defined function in a java class and configured this function in the EPN assembly file under the processor tag.
But when i am trying to access the function in the config.xml file , it is giving me an error in the query.
Please provide urgent help that how to write the exact query.

Hi,
In the EPN Assembly file use
<bean class="com.bea.wlevs.example.FunctionCEP.TestFunction"/>
instead of
<bean>com.bea.wlevs.example.FunctionCEP.TestFunction</bean>
Best Regards,
Sandeep

How to check empty idoc fields in user defined function

Dear All,
I am working on an IDOC to file scenario. In my user defined function, I want to check whether a particular field of the idoc is populated. I can perform this test in message mapping by comparing the field with an empty constant.
How can I do the same test in an advanced user defined function? I have tried all the following, but none has worked so far
If (a.length == 0) .
If (a[0].length == 0)
If (a[0] == )
If (a[0] == )
Am I doing something wrong?
Thx/Farshad

To check whether an element is not available:
if (a.length == 0)
but you have to set cache to context. If you set cache to queue, it will not work, as in this case the context changes are part of the array a.
To check whether an element is empty:
if (a[0].equals(""))
Regards
Stefan
Message was edited by: Stefan Grube
Message was edited by: Stefan Grube

How to fix iOS 5.0.1 battery issues - answer

Since I upgraded to ios 5.0.1 my battery was shocking. I lost 20% overnight and about 1% every 5 mins when using the phone. This morning I turned off location based iADs and my battery has been great. I went out for 1.5 hours earlier on my bike and even took a couple of photos and my battery stayed at 66%.
I don't know if this is a true fix but it worked for me.

Thanks for the link
Ok, last question: I know how to restore my phone without a back up. If I do this will I lose my installed apps and music? I have all of my mp3's so worst case scenario I can put those back in my itunes. What about the apps that I have purchased? Thanks for your help!

HOW TO FIX iOS 6 WiFi Problem

I have a 3GS and this FIXED my WiFi issue.
**Please Note: This will permanetly delete your current Safari History and whatever websites you have open on your iPhone.
1.) Go to SETTINGS
2.) Go to SAFARI
3.) Push "Clear History"
4.) Push "Clear Cookies and Data"
5.) Shutdown your iPhone (for at least 1 minute).
6.) Restart iPhone
7.) Go to SETTINGS
8.) Go to WIFI
9.) Choose your WiFi Network
I helped a friend with a 4S and this also solved her WiFi problem.
Hope this helps you!

If this does help you and fix your iOS 6 WiFi issue, please "Reply" and click "This solved my question" so other people can find this answer.
Thanks!

How to fix IOS 5 Podcast Bookmark Problem/bug

I have an ipod touch 4 upgraded to ios 5. It no longer marks my place in podcasts. If I play part of a podcast, and then play something else, the podcast returns to the beginning when I go back to it. My podcasts are also no longer showing as listened to.
There is a bookmark app. However, I am not sure it works with IOS 5.
I couldn't find any way to report this bug to Apple

no suggestions but i use to have the same problem but now my ipod will not turn off,display anything, not even sync to the computer so i can restore it. ALL IT SHOWS IS A BLANK WHITE SCREEN APPLE PLZ FIX THIS IOS 5 MESS PLZ!!!!

How to fix iOS 5 problems for 4 th generation iPod touch

Updated my 4th generation iPod touch to ios 5.1. Now I cant download apps or crop photos. Any suggestions?

no suggestions but i use to have the same problem but now my ipod will not turn off,display anything, not even sync to the computer so i can restore it. ALL IT SHOWS IS A BLANK WHITE SCREEN APPLE PLZ FIX THIS IOS 5 MESS PLZ!!!!

How to fix iOS 8.3 text message app issue?

I cannot delete old text messages ever since I updated to the new iOS 8.3. Whenever I try to delete them my screen freezes and deletes everything. I have to do a hard restart and it brings everything back that was there before the update. If I go back into my messages it comes up as if i had none and I can't send or receive any so I am forced to restart the phone. Is there a solution to this?

Atorres1989 wrote:
I cannot delete old text messages ever since I updated to the new iOS 8.3. Whenever I try to delete them my screen freezes and deletes everything. I have to do a hard restart and it brings everything back that was there before the update. If I go back into my messages it comes up as if i had none and I can't send or receive any so I am forced to restart the phone. Is there a solution to this?
Go to a Genius Bar. Make an appointment.

How to fix "run time error R6025 pure virtual function call"

I instaled ITUNES 10.6.1.7 on W7 at first the program worked ok but after 6 or 7 times that opened it, just when was searchir for a music title the program crashed with the msg above.
I applied instructions in Apple support page about eliminate plug-in files. it worked again but In same way, about 6 or 7 times I opened the program and searched for a title the same problem was shown
Thanks

Hi I have been getting the same "Microsoft Visual C++ Runtime Library ERROR: R6025 - Pure virtual function call" every
now and then in windows 7 operating system. then i have to wait for some time. The only thing thi sappears when i open My computer (the issue not prevails at times!). The above reply is not clear enough!. Can any one give a better/clear resoln for me!!

How to do this in SQL or User defined Function?

Hello All
I have a table STATUS_CODES which has values like this
HRKEY ITEMKEY
HRAS 1
HVAS 1
HXAS 1
SMST 2
SLRS 2
HWAS 2
PAYT 3
The HRKEY is unique
Same ITEMKEY may be applied to different HRKEY (Item keyhas fixed values 1, 2, 3)
Now I have a function which can return values like one of these(any combination of HRKEYseparated by a dash) which is captured in a variable called LAST_STATUS
HRAS-PAYT
HRAS-SMST-PAYT
PAYT
HRAS
HXAS
HRAS-HVAS-PAYT
HRAS-HVAS-SMST-SLRS-PAYT
HRAS-HVAS-SMST
Now I want my query or function to do this
If one of the values in the LAST_STATUS string matches STATUS_CODES.HRKEY, then it should return that HRKEY based on the priority below
If Itemkey = 1 then it should return HRKEY for ITEMKEY = 1
Then 2 and then 3
If there are more than one HRKEY for same ITEMKEY then it should return any one of them
SO for eg.
If LAST_STATUS = HRAS-HVAS-SMST-SLRS-PAYT, then Output = HRAS
If LAST_STATUS = SLRS-PAYT, then Output = SLRS
If LAST_STATUS = PAYT, then Output = PAYT
Thank you for your help
Ach

With Scotts setup script
flip@FLOP> var str varchar2(1000);
flip@FLOP> exec :str := 'HRAS-HVAS-SMST-SLRS-PAYT';
PL/SQL procedure successfully completed.
flip@FLOP>
flip@FLOP> with a as
2       ( select :str last_status from dual )
3      ,b as
4       (select '-'||last_status str, rownum rn from a connect by level <= length(last_status) )
5      ,c as
6       (select str, rn
7              ,instr(str,'-',1,rn ) f
8              ,instr(str,'-',1,rn+1) t
9        from   b
10        where instr(str,'-',1,rn) > 0
11       )
12      ,d as
13       ( select c.*, decode(t,0,substr(str,f+1),substr(str,f+1,t-f-1)) x
14         from c
15       )
16      ,e as
17       (
18 select d.*, s.itemkey, row_number() over (order by s.itemkey, d.x) rnk
19 from   d, status_codes s
20 where d.x = s.hrkey
21       )
22 select x hrkey
23 from   e
24 where rnk = 1
25 ;
HRKEY
HRAS
flip@FLOP> exec :str := 'SLRS-PAYT'
PL/SQL procedure successfully completed.
flip@FLOP> /
HRKEY
SLRS
flip@FLOP> exec :str := 'PAYT'
PL/SQL procedure successfully completed.
flip@FLOP> /
HRKEY
PAYT
flip@FLOP> exec :str := null;
PL/SQL procedure successfully completed.
flip@FLOP> /
no rows selected
flip@FLOP> exec :str := 'HRAS-HVAS----SMST-SLRS-PAYT-HRAS-HVAS-PAYT-HRAS-HVAS-SMST-SLRS-PAYT-HRAS-HVAS-SMST-SLRS-PAYT--';
PL/SQL procedure successfully completed.
flip@FLOP> /
HRKEY
HRAS

Strange colour spots (red & green) appear after RAW files converted to JPEG, anyone know how to fix it?

Strange colour spots (red&green) appear after RAW files converted to JPEG, anyone know how to fix it? Thanks.

I use "Export" function to convert the picture from RAW format to JPEG format, resolution 240 pixels per inch. Strange red dots appeared in the area supposed to be dark grey, as per the picture below. The red colour does not appeared in the original RAW picture when viewing from Lightroom, only exist in the JPEG it created. Any ideas how to fix this? Thanks!

How to use StreamTransformationException in user-defined function?

Hi,
I'm doing a DBLookup (using Java pgm in one of my Imported Java archives) for populating one of the fields in message mapping. If the DB connection fails, I want to terminate the mapping by throwing a StreamTransformationException from within a user-defined function.
I require urgent help in this regard.
Thanks in advance.
Regards,
Sridhar Rajan N

Hi,
I had the same problem. I failed to find the way how to throw a StreamTransformationException in my user-defined function. But I used another exception: NullPointerException. Yes, I know, this is not an elegant solution...
Best regards,
Andrzej Filusz

I have 4s iPhone , I download the iOS 7. Now the front receiver microphone is not working , please help me that how to fix the problem.

I have 4s iPhone , I download the iOS 7. Now the front receiver microphone is not working , please help me that how to fix the problem.

I live in South Africa, and I had the same problem with my iPhone 4.
After weeks of frustration and swearing, I was in the process of restoring my phone to a previous iOS. To do that you need to turn the "Find my iPhone" option off, since i turned it off, my problem was solved. No need to repair anything or revert back to old iOS.
***** that i cant use Find my iPhone, but atleast i can use my phone.

How to fix iOS 7.0.2 dictionary (define) function?

Similar Messages

Maybe you are looking for