How to fix 'self.document.form1.title' is null

I am new to JSP
When trying custom_jsp/samples/w4/w4_form.jsp, w4_view.jsp and w4_form_buttons.jsp
after pressing OK button, status bar appear 'self.document.form1.title' is null
1. How to fix it?
2. In the custom form, Where do the textbox value store? How to store? Any samples?

Does your form and entry definition that is using this form have an element called 'title'. 'firstName' and 'lastName' (internal field names). It seems like there is a javascript routine called mySubmit() which gets executed when you hit the OK button. The mySubmit() routine is trying to set the entry's title to the firstName + lastName. This seems to be defined in w4_form_buttons.jsp.

Similar Messages

How to fix self-asssigned ip?

the ethernet connection appears that this self-assigned ip, how to fix?

How does your system normally get its IP address? Via DHCP from a router of some sort or from your Internet provider? If so, then your Mac is no longer picking up an address and folks here will need more information, particularly about how you connect your system to the network, to be able to offer much in way of information.

I recently set up multiple accounts and when I was trying to figure out how to share files I messed up something in my documents. Everytime I open a doc from the ADMIN account, a box pops up that says "The file is not in the correct format" how to fix?

I recently set up multiple accounts on my imac, When I was trying to figure out how to share the documents I must have done something wrong. When logged into the Admin account, I open up any document and I get a message box that says, "The Document could not be opened. The file isn't in the correct format. The file might be corrupted, truncated, or in an unexpected format." What did I do and how do I fix it?

Without knowing what you did it is impossible to give advice on how to correct it.
If these were files you copied over from some other system then just Re-Copy them replacing the ones that are corrupted.
Other then that I suggest you Wipe the drive and start over with a clean reinstall of the OS and programs. Then if you want to share files to All Accounts place those files in a folder in the ROOT of the drive.

When i try to copy books to my nook, with every single title i continue to get an error message that says 'copy not allowed - no permission to copy the book'. any suggestions on how to fix this?

when i try to copy books to my nook, with every single title i continue to get an error message that says 'copy not allowed - no permission to copy the book'. any suggestions on how to fix this?

I had recently updated from Windows 7 to Windows 8.1 and thus had to re download Adobe Digital Editions. I downloaded Version 4.0 but the problem seemed to be with the authorization between the e-reader and the computer. While in ADE click the help button and click erase authorization then re do your user id and password. It worked for me.

How to fix EXC_BAD_ACCESS error? I just upgraded to 10.7.5 and now I can't open any MS Word documents

How to fix EXC_BAD_ACCESS error? I just upgraded to 10.7.5 and now I can't open any MS Word documents.
I get this error message every time:
Microsoft Error Reporting log version: 2.0
Error Signature:
Exception: EXC_BAD_ACCESS
Date/Time: 2013-05-28 02:28:42 +0000
Application Name: Microsoft Word
Application Bundle ID: com.microsoft.Word
Application Signature: MSWD
Application Version: 14.3.4.130416
Crashed Module Name: Microsoft Word
Crashed Module Version: 14.3.4.130416
Crashed Module Offset: 0x00938638
Blame Module Name: Microsoft Word
Blame Module Version: 14.3.4.130416
Blame Module Offset: 0x00938638
Application LCID: 1033
Extra app info: Reg=en Loc=0x0409
Crashed thread: 0
I tried to remove the plist files, but it hasn't worked! Please help!

What version of Microsoft Office for Mac do you have?
Pete

I have Acrobat 9 Pro and when I print hard copies of my PDF letters drop off from sentences throughout the document. Any idea why and how to fix this problem?

I have Acrobat 9 Pro and when I print hard copies of my PDF letters drop off from sentences throughout the document. Any idea why and how to fix this problem?

Hi,
We’re using Windows 7 Professional, Service Pack 1 and system type is 32-bit operating system.
Ange

I recently upgraded my software and now when I click on a document in an email it wont automatically open - does any superstar know how to fix this?

I recently upgraded my software and now when I click on a document in an email it wont automatically open - does any superstar know how to fix this? Thanks in advance!

Have you installed something called "CleanMyMac?"

Recently when I attempt to save a Pages document it won't allow me the option. The SAVE button is not bolded as an option to click on. Any ideas how to fix this?

Recently I have not been able to save Pages notes/documents that I have created. I have never had this problem before. When I attempt to SAVE, the button isn't bolded so I don't have the option to save. Any ideas on how to fix it?

Hi Peter, I appreciate any ideas you might have. I tried Apple support and I ended up at some 'unavailable' voicemail!?!!
I am using Pages '09.
It's not being auto saved.
I typically save to both pages and document files but I can't save anything. When I go to close it and it asks me if I want to save, the save window comes up but the SAVE button isn't bolded as an option. I have tried Command C but of course it brings me back to the same window. This only began happening a few days ago. I use Pages a lot.
Lesley

TS1702 I updated my phone to OS6. It worked fine for a few hours, has now turned it self of and cannot be turned on again. How to fix this?

I updated my phone to OS6. It worked fine for a few hours, has now turned it self of and cannot be turned on again. How to fix this?

Try resetting your iPhone ... but first, make sure it has a well charged battery!
Hold the on/off and home buttons together for 6 or 7 seconds until the Apple logo appears.

In Word 2004 I can not save documents or quit. One suggestion is the recent security update. Any suggestins on how to fix?

In Word 2004 I can not save documents or quit. One suggestion is the recent security update. Any suggestins on how to fix?

Security Update 2012-001 Bricks Rosetta programs
I've outlined the restore proceedure here, it covers a lot of bases and explains what is going to occur so please don't be intimidated it's a LOT easier that it appears.
Take your time and comprehend the steps involved and you'll be backup up like before in short order.
Restore method.
#1 Backup your personal data off the machine.
If you get a gray screen or some other hangup upon booting, try holding the Shift key down while booting to enter Safe Mode.
Backup files off the computer (not to TimeMachine). If you don't have a external drive, get one and connect to the USB/Firewire port and simply drag and drop copy your User folder to the external drive, it will copy all your files. It's best to have two backups of your data off the machine when trying to restore.
Disconnect all drives now to prevent any mistakes from occuring.
#2 Try Restoring from a TimeMachine or hold option bootable clone
If you have TimeMachine drive, or a hold the option key bootable clone use that to erase and restore from before the Security Update occured.
Obviously if you didn't make a recent backup before the update, your going to have to skip to Step #3.
Note: A TM restore can take a awfully long time, a clone restore takes under 2 hours in most cases.
If you don't know how to restore from TM drive
http://pondini.org/OSX/Home.html
#3 Reinstall OS X 10.6 from disk
If no recent TM or bootable clone then:
Get out your 10.6 install disk and make sure it's clean and polished (very soft cloth and a bit of rubbing alcohol, no scratches) If your disk is borked, you'll have to order a new one from Apple with your serial number.
Hold c boot off the 10.6 disk (wired keyboard, internal optical drive), use Disk Utility First Aid to >Repair Disk and Permissions of your internal drive (do not format or erase!!), Quit DU and simply re-install 10.6.
Note: Simply reinstalling 10.6 version from disk (without erasing the drive) only replaces 10.6.8 with 10.6.x and bundled Apple programs, won't touch your files (backup anyway) or most programs, unless they installed a kext file into OS X itself. (only a few on average do this)
Note: If Disk Uitlity can't repair the drive, then come back to seek further assistance and make sure you have a copy of your data off the machine.
#4 Update to 10.6.8 without Security Update 2012-001
Reboot and log in, update to 10.6.8 via Software Update, but EXCLUDE THE Security Update 2012-001 by checkinig the details and unchecking the blue check box.
#5 Reinstall any non-working third party programs
When you reboot, make sure to reinstall any programs that require kext files installed into OS X, you'll know, they won't work when you launch them or hang for some reason.
If for some freakish reason you get gray screen at any time when booting (possible it might occur when you reinstall older programs), hold the shift key down while booting (Safe Mode, disables kext files) and update your installed third party software so it's compatible with 10.6.8.
https://support.apple.com/kb/TS2570
Note: For most users likley Step #3 and #4 is likley all that is needed to be done.
That's it really.
Further Reading:
Learn how to have a OS X drive restore ability using TimeMachine or cloning software
Learn how to clone your entire OS X boot here
http://www.bombich.com/get_ready_for_lion.html
TimeMachine help here
http://pondini.org/OSX/Home.html
Make copies of your original Snow Leopard
http://www.walterjessen.com/make-a-bootable-backup-snow-leopard-install-disc/
Learn how to make a bootable SL USB thumb drive
http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
Deciding on upgrading to Lion?
Learn which programs ARE NOT compatible/updated for Lion, Rosetta programs will not run on Lion.
http://roaringapps.com/apps:table
Unverified hacks
Note: You may see a "hack" for this issue floating around, it has had mixed results as people's software is different.
You may want to try it, but it's at your own risk. It has worked fast for some and not at all for others, hopefully over time it will work for all.
The above methods I outline are Apple approved restore methods + based upon experience here and not a quick fix, but are sure to work as Apple recommends such steps themselves.
If at any time you feel this is beyond your capability, please seek local Mac/PC professional assistance before you lose your data.
In fact my steps above are very simple, you might want to have a family member or friend perfrom the proceedure in about a hour or two.
If you don't have any backup, please maintain at least a TM drive, just hook up a new blank external drive and TM will ask you to make a backup, takes some time so let it work.
If your a bit more skilled, a option bootable clone is much superior than TM drive.
Good Luck

I have two companies sending me indesign documents. One opens up and the dictionary is set to English. The other file opens at is in Hebrew, Not sure how to fix the Hebrew part and whether or not the fualt lies at my end or at the other end

I have two companies sending me indesign documents. One opens up and the dictionary is set to English. The other file opens at is in Hebrew, Not sure how to fix the Hebrew part and whether or not the fault lies at my end or at the other end

If only the language is Hebrew, you should correct it in the Paragraph and Character Styles.
But in such a case I would expect more problems.
If you are a creative cloud subscriber you should additionally install the InDesign version, English with Hebrew support:
Go to the preferences of you CC.app. It is found behind the Gear Symbols on the top right.
When the preferences open, go to the Apps section.
Change the App Language to English with Hebrew support.
Now you can install it. It will install on the very same place where your InDesign program is found some additional plugins, which will give you access to Hebrew functionality, like RTL text. Otherwise you will inherit in the document (and where you copy and paste it from such a document into another one). But now you can change or repair problems.
Now repeatstep 1 + 2, but you need not to install your own language again. InDesign will now, when started, run in the language of your OS (when you have it installed in that language) but with more functionality to handle problems with Hebrew documents.
The same steps you would have to do with Arabic or Asian documents. These languages will also add more plugins. But keep it limitted to those language you need. I have installed it that way, because I get sometime documen where the text flows the wrong direction or the numbers come up in Farsi digit, not in Arabic digits. For such purposes I need versions in languages I don’t understand myself.

TS3276 Hello. When trying to forward a multiple page PDF document, only the first page appears. Does anyone know how to fix this. TY

Hello. When trying to forward a multiple page PDF document, only the first page appears. Does anyone know how to fix this. TY

Are you sure? I believe the mail program only previews the first page for you, but sends the whole attachment. Try opening the attachment (e.g., select and hit spacebar for a preview of the whole thing, or by double-clicking it, or control-clicking then "Open...") You should see the whole document.

How to Overwrite Document Properties (Title, Author) for Indexing Purposes

SES Experts...
Our client is running SES 1.1.1.2.0.0 and using a Database Data Source to index various documents (PDFs, DOC, XLS, PPT, etc.). The document metadata is taken from column data (TITLE, AUTHORS, KEYWORDS, etc.) rather than the properties of the document.
The client does not want SES to index the properties of the document (Author, Title, Subject, Keywords, etc.).
Is there a way to accomplish this? I believe the Document Service API could accomplish this but it's not clear to me how exactly we would do this.
Any help/pseudo code would be appreciated.
Thanks!

You have to implement a document service and place it in the pipeline after the default summarizer.
You could also try to remove the default summarizer from your pipeline. Try it out before wasting time on a document service implementation. Depends on the way you retrieve your column data.
If however you really need to develop your own DS simply overwrite the title attribute with the value from the column data you mentioned or delete unwanted entries.
public int process(DocumentContainer documentContainer) throws DocumentServiceException {
DocumentMetadata docMeta = documentContainer.getMetadata();
docMeta.setAttributes("TITLE", new String[] { yourtitle }); // overwrite attribute
docMeta.deleteAttribute("AUTHOR"); // delete attribute
return DocumentService.STATUS_ATTRIBUTE_CHANGE;
Oliver

IPad Wi-Fi has the self-assigned IP address 169.254.210.251 and will not be able to connect to the Internet. How to fix?

Mini connects to internet via cable modem fine.
Want to have ipad connect also but mini Wi-Fi has the self-assigned IP address 169.254.210.251 and will not be able to connect to the Internet. How to fix?

Hello:
I am a long way from a wi-fi expert, but.....
You need, I think, either a router with wi-fi or an airport (express or extreme). The iPad needs to connect to to a network. In my case, I use an airport express and both my iMac and iPad 2 connect to the Internet through the airport device.
Barry

Scanning in both HP Officejet 7210 and Samsung printer - the document scans but no file is generated - any ideas how to fix this? (It worked fine before installing Mavericks)

Scanning in both HP Officejet 7210 and Samsung printer - the document scans but no file is generated - any ideas how to fix this? (It worked fine before installing Mavericks)

PS: forgot to mention: if your printer is on your wifi network, you'll have to enter your wifi password on the printer to connect it to the network before Printers & Scanners will see it.
Sometimes a reset of the wifi system is needed too. A full set of directions would be:
Try:
uninstall all printer manufacturer apps and "utilities"
go to System Preferences > Printers & Scanners > Print
control-click on your printer in the column on the left
select "Reset Printing System..." and "reset" in the dialog that follows
do a factory reset on your printer. You'll have to consult the printer manual for how.
power down everything: modem, router, computer, and printer
power up each item in turn in the same order: modem, router, computer, and printer. Let each power up completely before moving on to the next
enter your wifi password in your printer so it can connect to the network
go back to printers & scanners and it should see your printer and download a driver for it from Apple
resist the temptation to install any printer manufacturer apps in the future.

How to fix 'self.document.form1.title' is null

Similar Messages

Maybe you are looking for