How to generate external network number based on WBS element number

Hi all(experts)
I am new to PS and I have a requirment.
To derive network no. from WBS identifier.
Enhancement is CNEXOO12
Function module is EXIT_SAPLCOKO_002(data transfer for Network number).
I wnat to know how to use the above enhancement to generate external network number based on the WBS element number. We have to take the Project number and extract the part of the name from it and then assign it to NETWORK and ACTIVITIY under it. The above also depends upon the project type.
Please let me know the fields\structures\tables that are needed and available during runtime in this Function module exit. If possible with some examples.
Thanks for your time.
SH

Hi Karthik
Thanks for sending me the table relations.
Can you please help me with the following.
1) Can you please expand the table relations with an example because when I am doing a relation I am not able to get the AUFNR fromAUFK-->PSPEL because the there are four levels of WBS in the Project and if I plug the first level WBS from the PRPS there are no table entries found. if I put directly the WBS(fourth level X-yyyyyyy95.xxxx10.10.2) in the AUFK-PSPEL table it works and I get the AUFNR.
2) Can I do retrieve the network number from the sales order(KDUAF).
Please suggest.
By enhancing this CNEX0012(EXIT_SAPLCCOKO_002) which transactions in PS are affected.
Please reply at your earliest.
As always thanks for your time and your help
SH.

Similar Messages

How to generate external material number?

hi all,
I need to create material in the report. this material number is assigned external (manually). but the user want to generate the number.
I only found the function ' MATERIAL_NUMBER_GET_NEXT' , which can only generate the internal number.
Is there other function which can help me to generate the external material number?
Thanks in advance.
Ned

you can use another number range II
so you use fm number_get_next to generate a material number .
And you can use this number for mm01 or an interface to create you material number I external
A.

How to generate new perner number using Abap Code in pa0002. what is the fu

how to generate new perner number using Abap Code in pa0002. what is the function Module used.

hi
define internal number ranges for ur implementation then when u run PA 40 do not input any employee number , system will generate the employee number automatically.
Regards
sameer

How to make External Reference number and Ref Date Mandatory in Complaints

Dear Experts,
Greetings!!!.
How to make External Reference number (EXT_REF_NUMBER ) and Ref Date ( EXT_REF_DATE ) Mandatory in Complaints.
Regards,
Sany

HI,
You can use Incompleteness Procedure to make those fields mandatory in complaint transaction.
Regards,
PP

How to view history status of a Network activity of a WBS element

Hi,
Which transaction can I use to view history of a Network Activity on a WBS element? I want to know when were changes made on an activity, e.g. when it was REL or TECO etc, and by whom.
Thanks.
PS_PS01

YOu can get the same in all the PS Transaction where you can get the disply of user & system status. The prerequisite as Ahmed Pointed out you must have ticked on change document and atleast ordstatchange and opstatchange ticket ( for the ordertype and Plant combination )
If the same is done than you can check as below,
check in CJ20n > Click on any of activity> click on Blue ( Status Icon )>Extra>Change Document -->All.
System will disply the status( User & System ) change history of that activity.
With Regards
Nitin P.

How to do budgeting at activity level and WBS element level in project syst

Dear GURU's,
Can any one please suggest me how to do budgeting at activity level and WBS element level in project systems, friends please I required set by step process.
I need how to do this configuration to map this scenario.
Regards,
Bhanu

Hi Bhanu,
Use this link :
http://help.sap.com/saphelp_45b/helpdata/en/86/98853478616434e10000009b38f83b/frameset.htm
after page opens , click on BUDGET MANAGEMENT , There you will find each and every step you want .
Thanks ,
Dhruv Kumar Malhotra

RRB-How to get the activity description instead of WBS element in the bill

Dear All,
I am using RRB DIP profile to do my Resource related billing
RRB-How to get the activity description instead of WBS element in the billing
document.Now iam able to get the cost and the quantity used as line items but instead of getting the respective line items in the invoice iam still getting the WBS
element description for all the activities.Can some body guide me to overcome this problem.
Assured reward points for your suggestions and help.
Thanking you,
Best regards,
R.Srinivasan

Dear All,
Please can any body help me for the same.IT is urgent.I will award you points.
thankyou,
Best regards,
R.Srinivasan

How to generate a random number with at least 6 digits?

Hi all,
All is in the question. :-)
I would like to generate a random number but the function "random
number" in Labview isn't accurate enough.
Do you know an algorithm to generate a random number of 6 or more
digit?
Thanks,
PF

Hi PF,
It's simple. Use 2 random number functions in the same process. Now you
should have 2 distinct random numbers that have the same accuracy. Let's say
LV gives accuracy up to the thousandth (0.XXX), now if you divide one number
by 1000 and then add to the other number you should then have something like
0.XXXXXX. Actually, LV random number function can give up to about 17 digits
(decimal). If you are looking for more digits (>17 digits), the idea above
may not work, then the last thing you may want try is to generate two or
three random numbers then convert all these decimal numbers to fractional
strings chop off the 0 and dot then concatinate them together. After all
it's still a random number. How many digits do you want to get? Make sure
the indicators acce
pt that many digits?
Good luck
Louis.
P-F wrote in message
news:[email protected]..
> Hi all,
>
> All is in the question. :-)
>
> I would like to generate a random number but the function "random
> number" in Labview isn't accurate enough.
>
> Do you know an algorithm to generate a random number of 6 or more
> digit?
>
> Thanks,
>
> PF

How to generate the batch number for group of records

Hi All,
requirement: i have created one sequence to generate the batch numbers.i have to get the nextval of the sequence for batch number (this column is not part of the table. its dynamic column/alias column) only for every 50000 records of a table.
detail description:
for example, if i have 10 records in a table. And, if i want to generate the batch number for every 2 records, then the output should look like belo.
batch-number qty
1 10
1 20
2 30
2 40
3 50
3 60
4 70
4 80
5 90
5 100
Please help me on this. Please let me know if you need more info.

one more update on the above request. this has to be done using SQL query only.

How to generate customize employee number

Hi,
I am trying to generate customize employee number and for that i have taken following steps
1. I changed employee number generation from automatic to manual
2. I created a sequence
3. I wrote a pl/sql code to create a customize employee number using the sequence concating it with text like 'EMP||'-'||seq.nextval.
4. I registered the pl/sql code in apps through formula function window.
But when i create a new employee it doesnt generate customize employee number.
Any Idea where am i mistaking.
Regards
Majid

You need to use the EMP_NUMBER_GENERATION fast formula of type Person Number Generation
The formula needs to be setup in the Setup Business group (business group id = 0)
Call your pl/sql function through the formula function in the EMP_NUMBER_GENERATION fast formula
Look into the help in the fast formula window for help on the the EMP_NUMBER_GENERATION fast formula.
The name of the fast formula has to be EMP_NUMBER_GENERATION for Employees, CWK_NUMBER_GENERATION for contingent workers and APL_NUMBER_GENERATION for applicants.
There was some document in metalink but was later removed by Oracle citing that it is a customization.
Also check this thread
simple employee number generationformula needed
Hope this helps.
-Debojyoty

How to find out the amount assigned to WBS element

Hello Friends,
Will you please inform how to find out the (amount/value/budget) assigned
to WBS element
Which Table it is stored in?
Thanks in Advance
Bset Regards
Diwakar

Hi Diwakarnd,
You can use any of the following reports to get the information you require.
1. S_ALR_87013557 - Budget/Actual/Variance
2. S_ALR_87013558 - Budget/Actual/Commitment/Rem Plan/Assigned
3. S_ALR_87013559 - Budget/Distributed/Plan/Distributed
Some of these reports use a complex selection criteria from various tables which has been grouped together, logically by SAP. The Logical Database table name for PS is PSJ.
Execute transaction code SE36 -> PSJ -> (Subobject : Radio button Structure) -> Click on Display.
You would see all the underlining tables used.
I hope the above helps.
Do not forget to award the points please.
Regards,
Jacob

How to generate a Unique key based on a some String value

Hello every one,
I am sorry , If I post this question in wrong group... I have a requirement to generate a unique key ( what every it may be alpha, numeric or alpha numeric) based on some String..
For ex : String str = "AbCX" - Gives a unique key based on "AbCX" value..
Is there any way we can get the unique value using Java ?
Thanks

May be not what you are looking for, but here's may idea:
use a sequence (db sequence) and add it the the string value. This way the value is unique, because the sequence is unique. So you could omit the string theoretically, but your requirement is met.
It's very easy to get a unique sequence number from the db using java, depending of the technology you use (which you did not say :-( )
Timo

How to generate sales order number

Hai friends,
In sales order creation, I want to generate a sales order number (i.e., 1 for the first sales order, 2 for the second and so on). This number should be generated successively in background. How it can be done..?

Hello,
Yes, I'm struggling to understand what you're after too. You could create a z table to keep track of the number if it's bespoke. Otherwise try these tables: FBN1, NRIV (intervals), T161 (po) TNRO (linked to NRIV).
Good luck!
Ash Thomas
http://www.ashthomas.com
Sap Abap Developer & Sap Abap Programmer

How to generate a random number within a specified tolerance and control that tolerance.

I am trying to simulate data without using a DAQ device by using a random number generator and I want to be able to control the "range" of the random number generated though. On the front pannel, the user would be able to input a nominal number, and the random number generator would generate numbers within plus or minus .003 of that nominal number. The data would then be plotted on a graph. Anyone know how to do this? Or if it's even possible?
Just for information sake, the random number is supposed to look like thickness measurements, that's why I want to simulate plus and minus .003 because the data could be thinner or thicker than the nominal.
Thanks in advance!!
Solved!
Go to Solution.

You can create a random number with a gaussian probability profile using two equal distributed (0...1) random numbers and applying the Box Muller transform.
I wrote one many years ago, her it is. (LabVIEW 8.0).
Message Edited by altenbach on 04-12-2010 09:13 PM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
BoxMuller.vi ‏10 KB

How to generate unique document number ?

Hi All,
We need to generate Document Number where there should be any gap, so that we cannot use sequence. For example : Invoice Number.
one possible approach like : Select MAX(InvoiceNumber)+1 from invoice, what if that table has millions of rows, is this reliable enough ?
How to avoid two user do the same query at same time that lead to dupplicate number ?
Anybody has done it this way in production? or any other approach ?
Thank you for your info,
xtanto

I strongly second Justin's strong suggestion about re-considering the requirement.
Be aware that for any of the schemes suggested to have a chance of working, all access to the table must be through stored procedures that use a SELECT FOR UPDATE on the counter table. No user in the database can have insert privileges on the document table except the owner. The owner's password should be kept in a locked safe and be unknown to anyone. If for some reason the owner needs access to the database, then remove the password from the safe, do what needs to be done, then get some guy off the street to set a new password, write it down and lock it in the safe again.
If you really need a gap-free number, it needsto be another column, separate from the PK. Use a sequence to generate the pk gaps and all, then create a procedure that runs periodically to update the gap free column. Soemthing like:
SQL> CREATE PROCEDURE fix_gap_free AS
2     l_v NUMBER;
3     TYPE id_tbl IS TABLE OF number INDEX BY BINARY_INTEGER;
4     l_ids id_tbl;
5     l_id2s id_tbl;
6 BEGIN
7     SELECT MAX(NVL(id2,0)) INTO l_v FROM t;
8     SELECT id, ROW_NUMBER() OVER (ORDER BY id)
9     BULK COLLECT INTO l_ids, l_id2s
10     FROM t
11     WHERE id2 IS NULL;
12
13     FORALL i IN 1 .. l_ids.COUNT
14        UPDATE t
15        SET id2 = l_id2s(i) + l_v
16        WHERE id = l_ids(i);
17     COMMIT;
18 END;
19 /
Procedure created.
SQL> SELECT * FROM t;
        ID        ID2
         1
         2
         5
         7So, id2 is going to be the gap-free column.
SQL> exec fix_gap_free;
PL/SQL procedure successfully completed.
SQL> SELECT * FROM t;
        ID        ID2
         1          1
         2          2
         5          3
         7          4So first pass is fine. Now lets add a few rows, so the table now looks like:
SQL> SELECT * FROM t;
        ID        ID2
         1          1
         2          2
         5          3
         7          4
         8
         9
        25and generate more gap free number:
SQL> exec fix_gap_free;
PL/SQL procedure successfully completed.
SQL> SELECT * FROM t;
        ID        ID2
         1          1
         2          2
         5          3
         7          4
         8          5
         9          6
        25          7If there may be deletions in the table, and you need to maintain the gap free nature, then just skip the WHERE id2 IS NULL predicate.
John

How to generate external network number based on WBS element number

Similar Messages

Maybe you are looking for