How to get a particle emitter to have an image for color?
There appears to be an option in the 'emitter' tab, under color mode, to change the color to 'take image color'. However, this option is not clickable for some reason. I am having a person cut a wall with a lightsaber and I want the emitter to not be a solid color. I will include a screenshot.
From the Motion manual:
"Take Image Color: When you choose this mode, each new particle’s color is based on the color of the image at the position where the particle was generated. This mode is available only when the Shape pop-up menu in the Emitter tab is set to Image."
Andy
Similar Messages
-
I disabled my iPhone 4 and while doing a restore via iTunes, it is downloading and timing out so the download is not completing. any idea how to get past that? I have tried many times and the same error keeps happening.
You need to force the phone into recovery mode, as described here, & restore it:
http://support.apple.com/kb/ht1808
Sorry, you've already lost all data on your phone. -
I have lost my "Basic" panel in the Develop module and can't figure out how to get it back. My right panel goes from the Histogram straight to the Tone Curve panel. My Basic panel should be below the Histogram. Any ideas how to get it back. I have even uninstalled my lightroom and reinstalled it with same issue. Help!!!
Right click on or near one of the other headers and a pop-up will appear and you will be able to select the Basic Panel for viewing.
-
My daughter downloaded a bunch of apps and I need to know how to get them reversed. I have not received any email receipts, but the charges have shown up on my bank account. This has all happened within the last couple of hours. I have tried numerous times to "report a problem" but am not having any success. Keeps redirecting me to support. I need help trying to get a hold of someone. I know that there has been a settlement recently about this situation.
Apple - Support - iTunes Store - Contact Us - http://www.apple.com/emea/support/itunes/contact.html
How to request a refund for an iTunes or App Store purchase - http://www.imore.com/how-request-refund-itunes-or-app-store-purchase
iOS: Understanding Restrictions - http://support.apple.com/kb/HT4213 - "You can enable Restrictions, also known as Parental Controls, on an iPhone, iPad, or iPod touch to prevent access to specific features."
Children should not have access to your iTunes account password.
You should also consider removing credit card information from your account so no unconsidered purchases can be made by anybody. iTunes Store: Changing Account Information - http://support.apple.com/kb/HT1918 -
I will like to know how to get the money that i have in my itunes acc how to used it up to buy a cd with it
LatachaM_VZW wrote:
If the incorrect PIN code is entered too many times, a PIN Unlock Key must be obtained from Verizon Wireless at 908-559-4899 if you are outside of the United States and 800-922-0204 or *611(send) from your mobile number inside the United States..
The SIM PIN option is only available when the handset is in GSM / UMTS mode. Refer to Network Mode Setting for further assistance.
Thank you, LatachaM_VZW
Are you talking about the PUK code (when the PIN for the SIM has been wrong too many times)? The OP is talking about network unlock, and is using a foreign SIM. Global Services certainly wouldn't have the unlock code for a SIM that isn't theirs.
I have heard that if you do enter the incorrect network unlock code too many times, the phone becomes permanently locked (i..e cannot be unlocked even with a valid unlock code) but not everyone agrees that this is true for all phones.
Jax's post above really says it all, you will need to search the web for a service that will unlock this Motorola phone. In doing so, you might find a number of threads that say the Global has to be activated in the US before an unlock code will work. Others were able to unlock without this. -
last night I stole my ipad and not how to get the serial number I have the itunes account that I do
What To Do If Your iDevice or Computer Is Lost Or Stolen
If your Mac, iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should do in advance - before you lose it or it's stolen - and some things to do after the fact. Here are some suggestions:
Reporting a lost or stolen Apple product
What-To-Do-When-Iphone-Is-Stolen
Lost or Stolen iPhone? Here’s What to do.
6 Ways to Track and Recover Your Lost/Stolen iPhone
Find My iPhone
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
Find My iPhone
Setup your iDevice on MobileMe
OS X Lion- About Find My Mac
How To Set Up Free Find Your iPhone (Even on Unsupported Devices)
Third-party solutions for computers:
VUWER 1.5.4
Sneaky ******* 0.2.0
Undercover 4.7
LoJack for Laptops Premium Mac
STEM 2.1 -
I keep getting notified I have an update available but when I try to update I get the following msg ,"You have updates available for other accounts To update this application, sign in to the account you used to purchase it.". I only have one account with apple and the software was preinstalled when I purchased my macbook in Aug 2012 with that account. Has anyone had this problem or know how to find out what account apple needs?
You log into the App store using the same Apple ID you used to set the computer up, verify that none of your apps are hidden and that they have all be accepted and then download and install the update
for help contact the App store support - link is on the right ot the App store window
LN -
Is there a way to remove installed updates from the App Store update window? I keep getting an alert that I have an update for Apple Remote Desktop. It says its installed, but the alert and the app keep showing up. Annoying!!
Spotlight: How to re-index folders or volumes
http://support.apple.com/kb/ht2409
Mac App Store: Cannot update App Store purchases or updates do not seem available
http://support.apple.com/kb/TS4236
If re-indexing the spotlight doesn't fix it,we can try a few other tricks. -
How to get the list of users who has access for list of tcodes.
How to get the list of users who has access for list of tcodes.
Go to transaction SUIM, this has a number of reports for users/authorisations
open the Where used>Autorization Values>In Users
and double click to execute
in authorisation object, enter S_TCODE
then press the "Enter Values" button
It will offer entry boxes to put the transaction code you are interesed in.
Then execute and the list of users with access to this transaciton code will be returned. -
The App Store says I have updates for I-Photo and Garage Band. When I try to update I get the following message: You have updates available for other accounts To update this application, sign in to the account you used to purchase it." Both apps came with my computer and as far as I know I only have one Apple account. Any thoughts? Thanks.
KarenThanks for you reply. I'm 99% positive that I'm using the user id and password that I used to set up my computer. That's why I'm stumped. I read the solution someone else suggested (type your user name without @gmail and create a new password. When I tried it, I was asked for my birthday. It didn't recognize it. I know I got my birthday correct. Oh well...
Karen -
something went wrong with my apple tv and now it says that it is in retail demo mode. How can i fix it? I have had it for more than one year without any problem
To turn on/off retail mode, go to settings, general, legal.
Do not open legal, just put the cursor there.
Then, on the remote, type this sequence : right - right - left - center.
The AppleTV should reboot. -
How to get the document path of the pictures uploaded for products?
Hi Gurus,
How to get the document path of the pictures uploaded for products uploaded through tcode COMMPR01?
Many Thanks,
Neerajclient path.
I need to get the client path in order to download files form server to client.
Best regards,
Huy. -
How can v differentiate that whether v hav to go for DBCONNECT OR UDCONNECT
Hi all,
how can v differentiate that whether v hav to go for DBCONNECT OR UDCONNECT.
appreciate with points
regards
KKHi,
DB Connect :
supports 8 sourcesystems only.
Extaction will be faster than UD Connect.
If small volume data is there then go for DB connect.
UD Connect:
It supports all sourcesystems.
If data volume is high then this can be useful.
UD connect is more expensive than DB connect.
GTR -
How we will know whether RFC destinations have been created for sender and
Hi,
How we will know whether RFC destinations have been created for sender and XI system.
Thanks,
dhanush.Hi Dhanush,
you can check using the TCODE SM59.
Regards
Kenny -
I’m new to Aperture and neglected to mark RAW+JPEG pairs when I imported (from iPhoto). Now I have two images for each photo. Help!! How can I change this?
How did you import from iPhoto? If you saw the Import panel with raw -jpeg pairs, then you probably did not import your iPhoto library as library, but as files, and then you will see plenty of duplicates - previews, thumbnails, originls, edited versions. If that should be the case, it would be better to delete the import from iPhoto and to import your iPhoto library again, but this time using "File > Import > Library".
Only that would require compatible versions of iPhoto and Aperture. What are your Aperture and iPhoto version numbers?
Maybe you are looking for
-
Java.lang.NoSuchMethodError when try to use RDBMS WLI adapter sp2
Hi, We have encountered a problem when trying to use the latest version of the WLI RDBMS adapter downloaded from the website. This adapter comes as an ear file of size 4026K. Has anyone been able to get this version to work?? Was using the earlier ve
-
Cann`t connet to local network
i am cnnet this macpro to the local network n use manual ip to connect it show me connected bt i can`t acces any of network pc n also this pc cn`t goes on sharing.ill check all the settings t this issue still here...:( when this mac connect directly
-
Design View missaligned div tags location
I am using div tags to layout my webpage and the Design view shows the wrong alignment. Check mektronix-net.campusbizcenter.com for the page which seems to display correctly. I am also using CSS for formating the webpage. Is DreamWeaver having a prob
-
Return key on iMac Keyboard Has Suddenly Stopped Working
I'm using an iMac purchased in April 2007 and it is using the older white Apple keyboard (model A1048). All of a sudden, after a shutdown and a startup, the Return key has stopped working (the Enter key on the keypad still works). Nothing was spilled
-
Hi, I am exporting an access database using the msaccess exporter tool provided by the omwb. I am getting an error message "Error # 5 - XMLExporter - Invalid procedure call or argument". Pls help me in rectifying the error and do the export successfu