How to get Brushes to go lower then 3 Pixels

In the retouch for brushes.
The radius bar only goes to 3.
Is that the lowest limit ?
In working in PSE it can go to one (1)
Thanks,
Greg

Apparently that is that the lowest limit. Just make PSE you external editor and jump over to it when you need to go that fine. Surely you won't need to on every image. That's what external editors are for: when you need to do something that Aperture doesn't do.
DLS

Similar Messages

  • How to get the actual value rather than pixel value in vision assistant

    how to get the actual value rather than pixel value by vision assistant in my program.As shown in the figure            this is my programme   this is the result       But i want to get this result

    Check the documentation for the "ADF Dialog Framework"
    It may help
    Atilio

  • How to get the RGB value of each pixel of a hole image?

    Hi,
    I'm trying the get the RGB(between 0 and 255) value of each pixel of a hole image. I writte this code:
    public void convertImage()
         int w = bufferedImage.getWidth();
         int h = bufferedImage.getHeight();
         int[] rgbs = new int[w*h];/* create a new array */
         bufferedImage.getRGB(0,0,w,h,rgbs,0,w);
         for(int i=0; i<10; i++)  
             System.out.println(rgbs);
    But the value rgbs[] contain an 8 bits integer, it's possible to have the RGB of this.
    In other case, do you have another sample of code to help me to get the RGB value of each pixel of a hole image?
    thanks.

    Hi, I am currently working on an application which requires the generation of color histograms that are a representation of a given image ie; myImage.jpg. I have made use of the JAI API and used it's Histogram class to generate a histogram vector for the image that I provide.
    However, upon closer inpsection, I have realised the following:-
    (1) The image, as it contains multiple colours is a multi-banded image ie; this means that each individual pixel in the image contains multiple colour samples (I assume) ie; Red, Blue Green. Due to this, a "separate list of bins represents each individual band". This means that for myImage.jpg, there is not ONE individual vector that contains data such as "400 pixels purple" "5000 pixels yellow" etc but there are indeed 3 vectors that represent the image.
    I have found this to be true using the getBinSize(int band, int bin) method call - the first parameter being 0,1,2 for Red Blue or Green.
    My basic (or complex) problem is that I basically want to generate 2 color histogram vectors that represent 2 separate images and then compare these vectors "side-by-side" using the vector comparison algorithms that I have already developed.
    Is there a way of using Java's Histogram class and it's associated methods to be able to store all colour information for an image in only ONE vector?? I am pretty certain that this is not possible, so my dilemma is now: - If I have an image and it is represented by three separate vectors/histograms, then how can I possibly compare these to say whether an image matches or not.
    When a pixel is analysed by a program, what seems to be the result returned is how that pixel is made up in terms of Red, Green or blue ie; a purple pixel is X blue, X red and X green and hence 3 vectos existing.
    Can anybody offer advice on how to achieve this task of looking at a pixel and simply determining it's actual color. I would preferably like to keep my code that I have already developed ie; the use of the Java Histoogram class but any other offerings are appreciated.

  • Tried playin my ipod nano 6th gen on my xbox 360. Everything was good till today when i was told how to get it  to work. Then all of a suden all the files and songs were gone on my ipod. now my network connection cant find my ipod.

    Does any body know how i possibly messed up my ipod. After i plugged it in today i think i uninstalled somthing i shouldnt have. None of the devices read it as an Ipod but a usb mass storage. Itunes cant even bring it up. Plz some help

    From the OP: "My old computer got a virus and when that happened all my music was lost. "
    They don't have the music on their computer so they cannot transfer the iTunes folder, from the computer to their iPod and then to the new computer. And if they try to enable disk use on the iPod it will erase all the music that is on it. The method you cited is moving the files in a data format using the iPod as a flash drive. It doesn't work if they are in music format. That is why I suggested Yamipod.

  • How to get purchase history into library then on to iphone

    ?

    You can access your purchase history directly from your iphone.  Go to the apps store and then tap the Updates icon at the bottom, then on next page, tap "Purchased".

  • How to get the colors value of each pixel (ps cs3 ,JS) ?

    hi all,
    i use something below, and they dont work.
    var colorvalue=docRef.colorSamplers[0].color.red
    fileOut.write("value=")
    fileOut.write(colorvalue)
    thanks!

    > var colorvalue=docRef.colorSamplers[0].color.red
    should be:
    var colorvalue=docRef.colorSamplers[0].color.rgb.red
    -X
    for photoshop scripting solutions of all sorts
    contact: [email protected]

  • How to get the pixel data so as to work on it?

    Hi all,
    I am trying to write a plug-in that will crop and scale the image, edit the selection in the image document based on image data. For this purpose I need the pixel data of the image. How to get the image data as different pixels and what is the data structure used to store this data?
    Assumption: No layers i.e., only background
    Thanks in advance,
    Sailu

    Hi Ilya,
    Thank you for your post. In the plugin architecture you propose (automation + filter), do you have an idea about how to share the pixel data between the two plugins? I have found a post that gives details about how to get pixel data and show it using ADM components
    Matthew Hollingworth, "ADM Color Managed Preview?" #1, 22 Oct 2007 11:53 pm but it supposes that you have a filter plug-in.
    Again, does anyone knows how to preview the current image in a AUTOMATION plug in? This seems impossible.
    Thank you all for your help
    Cheers,
    Chaker

  • How to get online apps to work with the Verizon DSL modem firewall set at "Medium" level, not "Low?"

    How to get online apps to work with the Verizon DSL modem firewall set at “Medium” level? Xbox 360 Live, FTP, and the Windows sntp Time checker native to Windows XP WON’T WORK unless the Verizon firewall is first reset down to “Low.” Then all works well, but I then risk low firewall protection. Setup: · Westell 6100 DSL modem (Software Version: VER:4.04.03.00 Transceiver Revision: 7.2.3.0 Model Name: C90-610015-06), · D-Link DIR-655 wireless router (Hardware Version: A3, Firmware Version: 1.21), For Xbox 360 Live the “canned” port forwarding rule for provided in Verizon’s drop-down list for the Westell 6100 modem forwards ports 88 and 3074 for both TCP and UDP. This does not meet Microsoft’s forwarding recommendations for Xbox 360 Live stated at http://support.microsoft.com/kb/908874. Instead, for the Verizon modem (Westell) I made a new port forwarding rule to comply with those Microsoft instructions. It forwards ports 53, 80 and 3074 for TCP and ports 53, 88 and 3074 for UDP. These same ports are also forwarded in the D-Link router configuration. For FTP, port 21 is also forwarded for TCP and UDP in both modem and router. But they don’t work until I first cripple the Verizon firewall down to “Low.” How to get them to work with the Verizon firewall up to Medium?

    While I do not know the answer to your question, BUT since you have this modem and another router - you could just follow.
    http://www.dslreports.com/faq/13600
    ^^
    If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

  • I can't figure out how to get my music to shuffle on my iPhone 5s. If I try to skip a song, it skips about 100 songs. It only ends up playing 4 or 5 songs then goes back to the song menu. Help please!

    I can't figure out how to get the music on my iPhone5s to shuffle. If I use the arrows to skip a song, it shuffles through a handful of the same songs then goes back to the song menu. Help please!

    Un-sync all your music to remove it from the device, then restart (hold down the home button along with the sleep/wake button until you see the apple, then let go). Now re-sync your music.

  • I updated the IPAD with the latest update and now when I turned the IPAD on, I get the itunes logo and then nothing else.  How can I fix this to let me use my IPAD?

    I updated the IPAD with the latest update and now when I turned the IPAD on, I get the itunes logo and then nothing else.  How can I fix this to let me use my IPAD?

    YOU ARE IN RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.
    3. Repeat the process if necessary.

  • How to get rid of the blue underline with green arrows on words and then a pop-up ad appears.

    How to get rid of the blue underline with green arrows on words and then a pop-up ad appears.

    Click here and follow the instructions, or if they don't cover the type of adware on the computer, these ones. If you're willing to use a tool to remove it(you don't need to, but may find it easier), you can instead run Adware Medic; this link is a direct download.
    (119795)

  • While creating a project in Garage Band my sample tracks were cut short then overwritten in soundtrack pro. Any ideas why? and how to get my tracks back?

    While creating a project in Garage Band 09 my sample tracks were being cut short- I then discovered they had been overwritten in soundtrack pro.
    Any ideas why? and how to get my tracks back?
    I never opened soundtrack pro to edit the track just Garage band....the track just mysteriously saved as half the track.
    I am running Lion and I upgraded my Garage band to '11 hoping it would resolve the issue...it didn't. Now I can't find that tracks at all.
    The 2 songs having the issue are titled Exotic Yearning and Reunion.
    I am in the process of reinstalling the audio content from my discs. I just don't want to run into this again.
    Any thoughts and help would be greatly appreciated!
    Thanks!

    After spending some time reinstalling the soundtrack pro 3 content I opened the full track called Reunion.
    It showed back up in Garage Band.*It was the full track and wasn't chopped off until I dragged it onto the project. Then it showed up chopped.
    Then I closed Garaged band and opened soundtrack pro 3....The song was again chopped off at the 1:33min mark
    Very Frusterated...:(

  • I-photo:  I used 2 cameras to take pictures on a trip --- i have put the pictures from both cameras into an album --- when i click on view and then sort by date, the pictures do not sort by date --- any ideas on how to get the pics sorted by date?

    I-photo:  I used 2 cameras to take pictures on a trip --- i have put the pictures from both cameras into an album --- when i click on view and then sort by date, the pictures do not sort by date --- any ideas on how to get the pics sorted by date?

    Select all the photos that you need to change, then click the "Photos" menu and choose "Adjust Date and Time".
    If you add a year, it will adjust all the photos that you selected by adding a year (so if you accidentally select one of the photos that already has "2012", that will change to "2013"). 

  • How to get low performances alert for Hyper-v Host ON scom

    Hello Expert,
    We have to implement a scenario VM Live migration which involved (SCOM,SCVMM,SCORCH Parts).
    where SCOM parts  will monitor the performances of SCVMM 's Hyper-V hosts and VMs running the within the Hyper-v hosts.
    when the VMs utilization exceed the threshold and then scom monitor checks the performances of Running Hyper-v Hosts ,then using SCORCH automation ,VMs are moved to one of the best performances the Hyper-v hosts.
    To implement this ,I have integrated SCOM 2012 R2 AND SCVMM 2012 R2 AND enabled the PRO Tips.
    but don't know how to get alerts and configured related to performances of VMs and Hyper-v host.
    What will be next  needed to achieved this from SCOM PARTS.
    Thanks and Regards
    RICHA KM 

    Hi,
    In addition, hope the management pack for Hyper-v 2012 can be helpful for you, please download and import it to your management group:
    http://www.microsoft.com/en-us/download/details.aspx?id=36438
    Regards,
    Yan Li
    Regards, Yan Li

  • I forgot the passcode to turn off restrictions. I have restored my iPad back to the factory settings and then synced it with the latest backup. The restrictions are still on and it is asking for the passcode. Can someone tell me how to get that off.

    I forgot the passcode to turn off restrictions. I have restored my iPad back to the factory settings and then synced it with the latest backup. The restrictions are still on and it is asking for the passcode. Can someone tell me how to get that off.

    The only option is to wipe the device clean and restore it to factory settings.  Hope you have a backup.
    Follow the instructions in  iOS: How to back up your data and set up your device as a new device http://support.apple.com/kb/HT4137 to restore the device to factory settings.
    Once you have setup the device as a new one, you can then sync it back with your iTunes account and all your music, apps, contacts and any other content sync'ed with iTunes will be loaded on the device. Any content that is stored only on the device and not sync'ed with iTunes, like app logins or data, will be lost during this process. Be forewarned that this is a long process and can take a couple of hours or more to complete. This can be painful, but it is necessarily so to prevent users from working around the security settings. After the restore is complete, you can setup a new Restrictions passcode. Make a note of the passcode to avoid this situation in future.
     Cheers, Tom

Maybe you are looking for