How to get font's information from PDF of page item?

The PDF file is placed in a document of InDesign.How to get the list of font's name from the PDF.I would like to know the font which is used in the PDF file.

Thanks, Michael 2 James
I try it.The IFontNames interface's "FontsSupplied" Function can't got the name of fonts from PDF file. This PDF file was created by InDesign.
If the PDF file had be created by Adobe Acrobat and some fonts had be embedded,the "FontsSupplied" Function would have gotten the name of fonts.
There other ways?Thanks

Similar Messages

How to get RMAN catalog information from Target database?

Hi,
How to get RMAN catalog information from Target database because i don't know about catalog database? is it possible?
Thanks

If you run RMAN backups of a target database using a Catalog schema in another database, the target is not aware of the catalog.
The RMAN backup script would have the connection identifier for the Catalog.
Hemant K Chitale

How to get the return values from a web page

Hi all :
how to get the return values from a web page ? I mean how pass values betwen webflow and web page ?
thank you very much
Edited by: jingying Sony on Apr 15, 2010 6:15 AM
Edited by: jingying Sony on Apr 15, 2010 6:18 AM

Hi,
What kind of web page do you have? Do you have possibility to for example make RFCs? Then you could trigger events (with parameters that could "return" the values) and the workflow could react to those events. For example your task can have terminating events.
Regards,
Karri

How-to get Font weight information while reading a PDF document

Hello everyone
it seems that the available tools to read PDF documents from Java don't allow to get font weight informations about the tokens read from PDF.
I need to know if a character is bold in order to recognize if it could be part of a paragraph's title.
is there a way to keep this information? (now I'm using PDFBox but it seems to allow only to get the PDF content as plain text, without keeping this kind of font weight info...)
thanks sincerely a lot
to anyone who would be so kind to help me
;)

shilkie wrote:
I've already read the wiki and the examples about iText, and also the two free tutorial chapters, but it seems iText doesn't allow to check the font character of a pre-existing PDF document,,it only allows to create document with a specified font but this is not what I needWell, to tell you the truth, I don't do much with PDF, myself, I only believe (from anecdotal evidence) that iText is much better than PDFBox. Have you downloaded it and tried a few things, or just read some of the docu? I am fairly sure that if you designate a font, there is probably a way to retreive this font as well, although not necessarily. Download it and play around a bit.

IPhone SDK: UIWebView - How to get the anchor information from URLRequs

I was planning to use the UIWebView but i am stumped now.
When the user clicks on a hyperlink, the web view delegate shouldStartLoadWithRequest is called and it does not contain the anchor information.
For e.g. if the href is say #01_02. This to a normal browser is a local anchor. The URL in the NSURLRequest contains just the file name information not the anchor.
In my particular case a anchor can be some other view of the topic which i will generate and keep it ready for the browser at this point. But since i don't get the anchor information it just shows the current page.
Is there a way to get the original value encoded in the HREF?
Thanks in advance,
-TRS

I may not have understood your question but if you want to pull out the anchor information out of a request, have you tried the fragment property of the NSURL object?
// request is type (NSURLRequest *); within shouldStartLoadWithRequest
NSString *fragment = \[\[request URL\] fragment\];
Usually this will have the anchor without the #, in your case 01_02.

How to get the view tree from a jsp page

Hi,
I would like to get the view tree of a jsp page. The idea is to dynamically include the content of one or more jsf pages into a UIPanel during a "value changed" event.
So, i could get from an arbitrary page like ...
<%@ taglib uri="http://java.sun.com/jsf/core"   prefix="f" %>
<%@ taglib uri="http://java.sun.com/jsf/html"   prefix="h" %>
<h:panelGrid columns="3" width="100%" rowClasses="gridTop">
    <h:outputText value="#{someBean.someValue}"/>
</h:panelGrid>... the corresponding List of components...
Any idea?

Thanks for your answer Jayashri,
The view tree can be retrieved by this way during the page is parsed, for example with scriptlets <%%>, or once the page has been parsed (the view has been builded and attached to the FacesContext).
My problem is to get the view tree of a page from another Context.
The idea is to build a dynamic layout of some pages that represents "views". I can imagine this like the concept of perspectives and views of Eclipse IDE.
Because of the difficulty to build it with pure JSP (cannot use dynamic ID nor JSTL ForEach), I try to build it into my backing bean and to bind it with a <h:panelGrid/>. By this way, I'm not able to use the <jsp:include/> tag as I usually did to include some content into the view tree.
Sorry for my english ;)
- Renaud.

How to get out program information from JVM?

I want to develop a program, in which a listener listen to JVM's operations. When a property of an object had changed, the listener can get out the property's name and value from JVM. That means I would like to monitor what JVM had done using some API.
I kown that JDI can do this, but I don't know how to code it. I would like to get a piece of example code!
thanks.

have a look here:
http://robocode.alphaworks.ibm.com/docs/jdk1.3/guide/jpda/jvmdi-spec.html
you need to write a native application (a shared object or a dll) in order to listen to the VM

How to get more, accurate, information from BT re ...

I am getting confused and bored with BT Infinity.
I registered interest last year on the Infinity web-site. The only contact I had was a suggestion to get all the neighbours to sign up to “justify” BT putting in the fibre etc… Not heard a thing since.
When I renewed by BT broadband contract in December (Option 3), I was told by the sales agent that we would be getting double the line speed within six months (current speed is 2-2.5mb). I assume this was by BT putting in ADSL MAX.
On Thursday and Friday last week there were a number of BT Openreach vans parked at the end of our small close, and up and down the main road. I walked out and asked them what they were doing and they told me they were “putting in the fibre” and we should have Infinity within a month.
I realise that BT Broadband and Openreach are not the same company, one is retail and one is wholesale - but I am quite excited about the possible of faster speeds.
I have been on to the Infinity web-site and entered my details – it tells me Infinity is not in my area, but I will be able to have 6mb (ADSL MAX??) but December 2012.
If I look on SamKnows – it shows my exchange as being 1700 metres away, with BT FTTC enabled, 21CN from next week etc..
O2 and Talk Talk are both offering me double the BT speed NOW !! And Virgin have surveyed and offered much higher speeds.
I would not move to TalkTalk as another family member has not enjoyed best experience, but my son has been using Virgin broadband for two years and loves it. I have been with BT since 1990, so would prefer not to move
Do I have to cancel my BT service to get them to react?

Thanks Brian,
Juts checked that, it says;
Your exchange is ADSL enabled, and our initial test on your line indicates that your line should be able to have an ADSL broadband service that provides a fixed line speed up to 2Mbps.
Our test also indicates that your line currently supports an estimated ADSL Max broadband line speed of 3.5Mbps; typically the line speed would range between 2.5Mbps and 4.5Mbps.
Your exchange is planned to have ADSL2+ by 30th September 2012. Our test also indicates that your line currently supports an estimated ADSL2+ broadband line speed of 6Mbps; typically the line speed would range between 4Mbps and 8Mbps. Our test also indicates that your line could support an estimated ADSL 2+ Annex-M broadband upstream line speed of 1Mbps and downstream line speed of 6Mbps; typically the downstream speed would range between 4Mbps and 8Mbps.

How to get job status information from printer without using printer's web interface

Hi, all!
I need to resolve problem with logging my printer hp lj 700 m712.
I configure syslog on it, but it sending only status messages ("peripheral low-power state" - for exapmle), I need to register the job status of printer's job on my server.
How can I do that?
Can you help me?

Hi Lexabb,
I suspect your question would be better answered in the HP Enterprise Business Community, as the HP LaserJet Enterprise 700 M712 printer series is a commercial model.
My technical expertise is with consumer products and software, I am sure the commercial folks would be happy to help if you re-post your question for them to answer. The HP Enterprise Business Community is an HP Forum designed for the Commercial and Enterprise customers to help one another. I am sure you will find some HP folks there to help too.
Click here to view the Printing and Digital Imaging. When the page opens you will see the option to 'Log in' or 'Register Now' on the right. The commercial forums are separate from the consumer boards, thus you will need to register if you don't already have a commercial account.
You may find the HP LaserJet Enterprise 700 Printer M712dnpage helpful while you wait for somebody in the commercial Forum to respond to your inquiry.
Best of luck.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

How to get the parsed HTML from a JSF Page

Hi,
I have an application that the user must fill in some data. Later on, it's shown a confirmation page with the user's information. I want to email that confirmation page to the company. The question is: How can I get the result html page as a string from that jsf confirmation page within the application.
Any help is appreciated,
Tiago Gaspar.

I need the exat same page the user is viewing i.e. html filed with the information .

How do I change a file from pdf to pages or word so I can edit it?

How do I change a pdf file to word/pages so I can edit it?

You can extract the text from most PDF's by selecting it and copying it to a document in an editor, though it may come out garbled. Anything more than that would require third-party software, if it can be done at all. PDF is not designed to be editable.

How to get the FND user_id from a OAF page

Hi,
I want to get the FND user_id of the user who opened the OAF page from the controller. How can I get this. Also how to see all the attribute names that I use in the controller. I see that I can use paramOAPageContext.getParameter("attribute"). Where can I get the list of all the attribute names?
Thanks for your help.

What attribute name was associated to that Button to use in getParameter(?)You have to enter the bean Id, let say the PoHeaderId is a MessageStyleTextInput Bean so have to take its ID from JDev or from front end.
String value = pageContext.getParameter("BeanID");Thanks
--Anil

How to get auto proxy configuration from plugin?

I need to retrieve the name of the client's proxy server to pass it along to my signed applet (because it doesn't seem to be getting the information automatically despite the fact that the java plugin is set to the use the browser settings for proxies).
The Java Plugin loads the proxy server information based on the browser preferences, but I haven't figured out how to retrieve that proxy information from the Plugin itself. Sometimes the javaplugin.proxy.auto.url system property is null, even if the browser (MSIE) is configured to use an auto-configuration script/url for the proxy server configuration. I can see in the Java Console that the plugin knows the auto-config url, so how can I access that property from within my applet?
Even if javaplugin.proxy.auto.url is not null, I don't know how to call the javascript function at that URL from within the applet to get the proxy server host name and port.
Does anyone know how to get the proxy information from the plugin?

Thank you! Indeed, the answer was there, but I hadn't been able to find it earlier (I guess I was searching on the wrong forums). For those who might be interested, here's the thread that helped:
http://forum.java.sun.com/thread.jsp?forum=30&thread=281981

Meta data information from dynamic web page

Dear all,
for website searching, we should put the meta data in every page, in my case
i have to get the data from dynamic page(data are coming from database).
So, how can i meta data information from dynamic web page
kindly suggest.
thanx,
R. Ramasubramanaim.

Build your web application with BSP, that's all I can say...

How can I get CDP neighbor information from access point reports in Cisco Prime 2.0

How can I get CDP neighbor information from access point reports in Cisco Prime 2.0? I have looked through all the reports and I cannot find a report that gives me the CDP neighbor information of an access point. I thought that information was in there, however I cannot seem to find it.
Thanks in advance!

Hi
You can get this from an inventory report in PI (Select Report Type AP). Here is an example of PI 2.1 works for me. Once you export this into excel you can sort based on controllers & filter the single controller connected AP you want.
Regards
Rasika
**** Pls rate all useful responses ****

How to get font's information from PDF of page item?

Similar Messages

Maybe you are looking for