How To Get Image Placed In Window Next To UserName?
How do you get your avatar placed into the pictureframe next to your username?
Thanks!
Dan
Thanks "GK" but did not work. My avatar is shown but wont place in
pictureframe as with other users.
Thanks!
Dan
Similar Messages
-
How to get image RGB/16???????? (cont)
VRect currentRect;
int32 progressTotal = tilesVert * tilesHoriz;
int32 progressDone = 0;
// process each tile in order
currentRect.top = 0;
currentRect.left = 0;
currentRect.bottom = tileHeight;
currentRect.right = tileWidth;
// don't go past the document bounds
if (currentRect.bottom > docHeight)
currentRect.bottom = docHeight;
if (currentRect.right > docWidth)
currentRect.right = docWidth;
pixelMemoryDesc.rowBits = (currentRect.right - currentRect.left) *
readChannelDesc->depth;
// read
while(readChannelDesc != NULL)
bigError = sPSChannelProcs->ReadPixelsFromLevel(
readChannelDesc->port, 0, ¤tRect, &pixelMemoryDesc);
if (bigError)
error = filterBadParameters;
throw(this);
unsigned char *imageData;// for image RGB/8, with RGB/16 is unsigned short
long temp = tileHeight * tileWidth * readChannelDesc->depth/8;
imageData = new unsigned char[temp];// for image RGB/8, with RGB/16 is unsigned short
memcpy(imageData, pixelMemoryDesc.data, temp);
FILE *file;
file = fopen("C:\\abc.txt", "ab");
if(file == NULL)
return;
fwrite(imageData, sizeof(unsigned char), temp, file);// for image RGB/8, with RGB/16 is unsigned short
fclose(file);
readChannelDesc = readChannelDesc->next;
return;
////end of customizing/////
- then we use a project to read "abc.txt" to get image:
////////// function of button that is clicked, the image is shown
void CPixelDlg::OnBtnSetPixel()
// TODO: Add your control notification handler code here
// POINT point;
unsigned char*memblock;// for image RGB/8, with RGB/16 is unsigned short
memblock = new unsigned char[HEIGH * WIDTH *3];// HEIGH , WIDTH is assigned by hard code// for image RGB/8, with RGB/16 is unsigned short
FILE *file;
file = fopen("C:\\abc.txt", "rb");
if( file == NULL)
return;
else
fread(memblock, sizeof(unsigned char), HEIGH * WIDTH *3, file);// for image RGB/8, with RGB/16 is unsigned short
fclose(file);
CClientDC dc(this);
int i = 0;
int j=0;
int k = 0;
for( i = 0; i < WIDTH; i++)
for( j = 0; j < HEIGH; j++)
if (k>WIDTH*HEIGH*3-3)
break;
dc.SetPixel(j, i, RGB(memblock[k],memblock[k+WIDTH*HEIGH],memblock[k+2*WIDTH*HEIGH]));
k+=1;
2. that code is ok for Image RGB/8. But with image RGB/16, now we don't know how Photoshop stores image data, and how to get image data to show???
Please help me?
Thanks,Use ResultSet.getBinaryStream()
-
How to get into BIOS in Windows 8
my question is this will the same fan control software that was on windows seven 64 bit lenova work with windows 8 and 8.1 just wondering if i have to uninstall before i upgrade or will it be compatable with 8 and 8.1 upgrade hope someone can steer me in the right direction here it would be appreciated-thanks
Hi,
follow the links below:
http://forums.lenovo.com/t5/Windows-8-and-8-1-Knowledge-Base/How-to-get-into-BIOS-in-Windows-8/ta-p/...
http://support.lenovo.com/en_US/detail.page?DocID=HT076607
win8 should be installed on the big HDD.
If you have enough computing skills Win8.1 Update could be installed on the small SSD using the new feature - WimBOOT.
x220 | i5-2520m | Intel ssd 320 series | Gobi 2000 3G GPS | WiFi
x220 | i5-2520m | hdd 320 | Intel msata ssd 310 series | 3G GPS | WiFi
Do it well, worse becomes itself
Русскоязычное Сообщество English Community Deutsche Community Comunidad en Español -
How to get image using Http and how to save in Smulator
Hi guys,
Am working in black berry bold. i dont know how to get image using htp connection and one more thing i need to save this image in side simulator directory............. what are the specific API i should...
Guide me.........If you want the input image size you need to pass it in as parameters.
A discussion thread on this topic is:
http://forums.adobe.com/thread/29948
-- Daniel R. <[email protected]> http://danielr.neophi.com/ -
How to get rid of a window which says: CalendarAgent wants to use the "login" keychain
How to get rid of a window which says: CalendarAgent wants to use the "login" keychain
I would get free EasyFind (Spotlight will be a total waste of time), and search for caremefile and caremefile.info. If it comes up with anything, right-click and select move to trash, or just destroy. Since you didn't install anything, shouldn't be necessary to authenticate with the admin password before it will move to trash. Could also click on reveal in finder, which will allow you to see the actual location. Set it up as per the screenshot below.
-
How to get into Publisher Main Window
Hi Experts,
To strat MDM publisher, I have done as followings:
1) start up MDM publisher gui
2) in "Connect to MDM Repository" window, choose one repository which I can access from MDM Data Manager.
3) enter my user and password
4) click OK to continue
Afterwards, I can see that a pop up window named "Select MDM Layout Server" is also showing up. There are list of the PC names for me to choose to connect. As MDM Layout Server has been installed on my local, I just choose my pc name from the drop down list and confirm it with OK. But it asks me again and again even I have already chosen. If I click Cancel. Publisher Window has been aborted.
Can you tell how to get into Publisher Main window ?
Thanks very much for your help.
Kind regards,
Wei DonaHi Jitesh,
Thanks for your reply.
I have checked from the Services that the status of the Layout Server is in "Started" status with Startup Type in "Automatic".
Could you let me know how to check the version of both Publisher and Layout Server ?
Regards,
Wei Dona -
How to get music for itunes windows to itunes ipod classic
how to get music from itunes windows to itunes ipod classic 160?
Connect the iPod to your computer, select the Sync options you want, let it Sync. Click on the eject button.
At which point do you get stuck?
Have you previously put music onto this iPod? -
How to get i cloud on windows 7
How to get icloud on my windows 7 laptop
Michael Black wrote:
Vizdemere wrote:
hey! that was easy. it took me only 3 hours to find out that you can't log on to www.icloud.com in a browser:- you have to do it via an icon in windows' control panel. ha! why didn't i think of that.
the stupid log on box in the browser just sits there flickering when i try to log on. ha! how stoopid am i.
no need for apple to give us some hints. just make us suffer. we'll remember much betterer.
you applebois make me wonder.
I log in to iCloud.com with IE 8 from my Windows 7 box at work all the time - no problem. However, Firefox never even loads the login page.
On Windows only IE and Safari are supported, that's why Firefox doesn't load. -
How to get names of all Windows in a Form Application at runtime
Dear All,
I want to get the name of all windows in a form module programatically at run time. How to get it?
Any help or comments will be highly appreciated.
Thanks in Advance.
Best Regards
BilalHi Francois Degrelle,
First of all thanks for the response.
What if I have no items on a content canvas? In my application, I am using content canvas to hold the Image banner and help text of the current form, having no items at all. I am also using tab canvases to hold all items of form. The tabs are displayed on the content canvas at run time. So the tab canvases acts like frames (In my case).
Now if I am looping through items, it gives me the list of all of the tab canvases. Whereas the tab canvas always has no window assigned, as it is displayed on content canvas which has that Window which I need. Thus I am unable to get the names of windows in my case through the above stated procedure.
Another option could be if I can get the name of the content canvas upon which the given tab canvas is displayed?
Any way to do this or some other way to achieve the use case?
Any help will be highly appreciated.
Thanks in advance
Bilal -
How to copy image of a window by window title programatically?
I would like to be able to programmatically copy the image of a window
that is one of several that are open by using the window title.
Once copied to the clipboard I would like to paste the image to a
file. Suggestions? Some less elegant options such as just
copying the active window would be considered.
Thanks,
Dennis UA couple of links which can help you.
Here you will find a collection of windows tools, which will also allow you to bring a window to the front by title.
Here you will find a VI which shows you how to "click" alt+printscreen to get the image into the clipboard.
Using the scripting (I think you have to register with LAVA to read that specific board) abilities you can use the GetClipboardImage method to get the image in LV picture format and save it to a file.
I will leave it up to you to put it all together.
Try to take over the world! -
Since updating Firefox, I have no tool bar / menu bar / search bar. All I have at the top is my fox news radio tool bar.
I can't figure out how to get the tool / menu / search bar at the top of my screen. So... I can't search from Firefox.The alt key or F10 will reveal hidden toolbars. Then use View- Toolbars to turn them back on.
Then press F9 when in a write window to turn on the contact sidebar for access to your address books. -
How to get image properties in PDF using javascript or plug ins
Hi
How to get the image(all the images) properties in PDF using javascript or suggest plug ins
Thanks in AdvanceHI,
In the PDF Edit API's ( as has already been suggested) there is the PDEImage and using this you should be able to find out everything you need to know about any image in a PDF file.
I would recommend starting with PDEImageGetAttrs
Hope this helps
Malcolm -
How to get image properties in PDF using javascript
Hi
How to get the image(all the images) properties in PDF using javascript?
Thanks in AdvanceHi
Thanks for your quick response. Any recommended plug ins
Thanks in advance -
How to get os version on window phone?
how to get os version(8.0 or 8.1) on window phone?
The problem is
WP8.1 has many versions. Sometimes it is very helpful to know the exact version because some versions have limitations
or bugs.
Hong -
How to get images from sybase database
i have been trying to fix this code and so far after 10 hours have no succes my jsp page is coded like so...
<html>
<head><title>JSP The Short Course - Lesson 13 </title></head>
<body>
<jsp:useBean id="myBean" scope="session" class="examplebean.bean2" />
<img src= "<%=myBean.getImage(1)%>">
</body>
</html>
and the bean is coded like so
package examplebean;
import java.sql.* ;
import java.io.Serializable;
public class bean2 implements java.io.Serializable {
public bean2() {}
public javax.servlet.http.HttpServletResponse getImage(int p){
java.io.BufferedInputStream bufferedInputStream;
Connection sqlca = null;
Statement sqlStatement = null;
ResultSet myResultSet = null;
javax.servlet.http.HttpServletResponse response = null;
java.io.InputStream i = null;
int popo = 0;
try {
Class.forName("com.sybase.jdbc2.jdbc.SybDriver");
String theDatabase = "jdbc:sybase:Tds:compserver:5000/syb3026";
sqlca = DriverManager.getConnection(theDatabase,"syb3026","oohyeahh");
sqlStatement = sqlca.createStatement();
myResultSet = sqlStatement.executeQuery("select Product_Picture from PRODUCT_TABLE where Product_Id = " + p + " ");
/* Construct the heading for the table */
/* Move to next row and & its contents
to the html output */
response.setContentType("image/jpeg");
while(myResultSet.next()) {
byte[] pepe = myResultSet.getBytes("Product_Picture");
popo = pepe.length;
i.read(pepe,0,popo);
bufferedInputStream = new java.io.BufferedInputStream(i);
java.io.ByteArrayOutputStream byteArrayOutputStream = new java.io.ByteArrayOutputStream();
int start = 0;
int length = 1024;
byte[] buff = new byte[popo];
int bytesRead;
while(-1 != (bytesRead = bufferedInputStream.read(buff, 0, popo))) {
byteArrayOutputStream.write(buff, 0, bytesRead);
bufferedInputStream.close();
response.setContentLength( byteArrayOutputStream.size() );
response.getOutputStream().write( byteArrayOutputStream.toByteArray() );
response.getOutputStream().flush();
JPEGEncodeParam param = encoder.getDefaultJPEGEncodeParam(img);
param.setQuality(1.0f,true);
encoder.encode(img,param);
out.close();*/
sqlStatement.close();
catch (SQLException e) {
System.out.println(" Error: SQL error of: " + e.getMessage());
catch (Exception e) {
System.out.println(" Error: JDBC Class creation: " + e.getMessage());
finally {
try {
sqlca.close();
catch(SQLException e) {
System.out.println(" Error: Closing connection: " + e.getMessage());
return response;
I KNOW THIS CODE IS NOT THE BEST WRITEN BUT I SHOULD WORK. BUT IT DOESNT I REALLY NEED HELP AND DONT HAVE ANY ASISTENCE IN COLLEGE ANY HELP WOULD BE APPRECITAED SINCERLY AS I AM LOST WITH THIS PROBLEM
THANK YOU
THANK YOU
THANK YOU
THANK YOUmaybe not so complex
if (RS_photo.next()){
buf = RS_photo.getBytes(1);
response.setContentType("image/"+photoname);
OutputStream out = response.getOutputStream();
out.write(buf);
out.flush();
}catch (Exception e){
//throw e;
}
Maybe you are looking for
-
Third Party Order Delivery Costs ( COGS for Purchasing)
Hello Experts We have a Scenario where in its a 3rd Party Order direct shipment Process where the Shipping is done by a Logistics Vendor! So->PR>PO>Inbound Del->GR->IR>Goods Issue-->Customer Invoice. Now the Issue we have is Delivery Costs(Freight,In
-
Adobe PDF Converter stops creating PDFs after several successful prints.
We have an application that create reports that we want to print to PDF and save on our server. We have been doing this for years. Have 50 employees doing this. One computer is having an issue were they will print to the "PDF Printer" and the pdf
-
Create Cost Center relationship usin SAP-PD
Hi all, SAP_PD is allowing to deal only with O, S and C object. How we can create new relationship to Cost Center (K) using SAP_PD. Any ideas? Thanks, Oleg Edited by: Oleg Sokolov on May 26, 2010 2:26 PM
-
Question on Migration Assistant
My new Macbook Pro (13 inch) is arriving in few days. Currently i have a Macbook (Matte Black) which i have been using for 2 years. I wish to migrate all my stuffs to the new Macbook Pro. Once this is done, what happens to all the application and oth
-
Hi friends, We have implemented depot sales, End user made first two invoices with my presence its worked fine. After one day he made third invoice with out my presence, for that invoice is not capturing excise values like BED, AED, ECS an