How to get/mix/stream the best sound in/out with 2 different audio source ?

Hello folks,
audio input:
Source01 => Microphone Beyerdynamic MCE86II Shot gun => XLR => Sound Card M-Audio Firewire Solo => firewire 400 => firewire 800 adaptor => FireWire 800 port.
Source02 => *MacBookPro5,2, Intel Core 2 Duo 3.06 GHz, 4 GB => ???
Audio output: *MacBookPro5,2, Intel Core 2 Duo 3.06 GHz, 4 GB _Built-in Input_
Basically, i want to use my MBP as an AUDIO IN SOURCE and AUDIO OUT SOURCE. What should I do ?
*same MBP.
Merci for your help.

If I understand your question correctly...
try the following
from Sources, choose the greyed out streaming library that you want to be rid of...in your case, make sure it is the right one, since they both have the same name.
You should get a screen that says "Library Unavailable" with 2 menu choices below that, "OK" and "Disconnect from iTunes".
Choose disconnect from iTunes and the library should be gone from your Sources.

Similar Messages

When recording voiceovers, I click the stop recording button at the end, but I can't figure out how to get rid of the "click" sound before I send off the recording!

When recording voiceovers, I click the stop recording button at the end, but I can't figure out how to get rid of the "click" sound before I send off the recording!

njordan wrote:
I can't figure out how to get rid of the "click" sound before I send off the recording!
drag the BottomRight edge of the region to the left, past the unwanted sound

How to get rid of the craking sound comming from my speakers

I have creative 4400 4.1 speakers. Whenever i switch them on (without even booting the OS),Small sounds like the ones comming out of old gramaphone disks which resemble like a cracking sound is comming out of my speakers.
can u tell me how to get rid of that sound , Is it a problem or is it natural in speakers.
-Siva Kumar Reddy.CH.V

If it's happening when they're turned on, but the PC isn't (or there is no source connected to the speakers), then you could try the speakers on another power outlet (in another room perhaps), to check if there's any interference or "dirty power". If there is other electrical equipment around something could be causing interference. It is possible though that there is a hardware fault.
Cat

How to get rid of the properties tab popping out when I create a new shape?

Hi! I am having a bit of trouble getting rid of the properties tab that pops out everytime I create a new shape in Photoshop CC.
Are there some settings to stop this from happening? I have my space strictly organized, as most of you probably, and I need to close it each time I create new shape... so it's frustrating.
Thank you!

After you draw out a shape, then go to the Properties panel fly-out menu and uncheck Show on Shape Creation

I just need to know how to get rid of the Related Searches box added with last update. Ce53

Explicit details, please.

hello, this is nothing that shipped with a genuine mozilla update. you have numerous malicious extensions installed. please go to ''firefox > addons > extensions'' & remove any suspicious entries (toolbars, things that you have not installed intentionally, don't know what purpose they serve, etc). also go to the windows control panel / programs and remove all toolbars or potentially unwanted software from there and run a full scan of your system with the security software that you have in place and different other tools like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes] & [http://www.bleepingcomputer.com/download/adwcleaner/ adwcleaner].
[[Remove a toolbar that has taken over your Firefox search or home page]]
[[Troubleshoot Firefox issues caused by malware]]
you might also want to try to [[Reset Firefox – easily fix most problems|reset firefox]]...

What's the best way to deal with having different units plotted on the same graph?

They are all using Voltage, so I guess I could have a way to switch between voltage and other units. The main readings will be temperature and strain gage readings, which I've then configured using the Measurement & Automation Explorer as Virtual Channels.
Any ideas/suggestions from people who've dealt with this before?
I'm using Labview 6.1.
Thank you!
Lauren

I attached an example jpg plot of an application that I had.
I did not necessarily divide the data arrays by their maximum, even though it is an option. In this case 100% equals the maximum.
I divided them by a value that the operator sets(it is defaulted to some value). If that changes, the graphed is replotted, with the new normalized data
Attachments:
Example_plot.jpg ‏46 KB

How to get the best sound from iMac?

Has anyone heard of "Pure Music"? Supposedly it's able to make music sound better. I downloaded it for a 15 day trial but haven't figured out how to get it to work with itunes radio. I'm using Klipsch 2.1 speakers with a late '13 iMac 3.1 quad core i7 w/ Yosemite. I'm not unhappy with the sound. Just wondering if there are any ways to enhance or tweak to get the best sound out of my system.

*just a little update, I fixed the problem.
I was suppose to put the Nvidia driver controller for the select program tab as well
Everything is running much smoother now, and I also had to turn off eco mode lol.

Im connectioning my macbook to my hdmi port in tv. I am getting no sound through the tv only the macbook speakers. anyone know how to get my tv to read sound?

Im connectioning my macbook to my hdmi port in tv. I am getting no sound through the tv only the macbook speakers. anyone know how to get my tv to read sound?

The Mini DisplayPort to HDMI doesn't carry audio unless you have the Mid 2010 model 7,1 and there're no audio plugs on most TVs to work with HDMI since it's expecting audio with the HDMI. But check your TV manual to see if it has audio plugs that work with one of the HDMI ports.
If you have the Late 2008 model 5,1 Aluminum Unibody or Late 2009 model 6,1 White Unibody with the Mini DisplayPort rather than the Mini-DVI there is an adapter that uses the Mini DisplayPort and a USB port to combine video and audio to HDMI. It's only 2 channel stereo not 5.1 Dolby Surround.
http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10428&cs_id=1042802 &p_id=5969&seq=1&format=2
The Mini-DVI port doen't carry audio at all. The Late 2008 model 5,1 Aluminum Unibody and the Late 2009 model 6,1 and Mid 2010 model 7,1 White Unibody have a Mini DisplayPort. The Early 2006 model 1,1 through Early 2008 model 4,1s plus the Early and Mid 2009 model 5,2s have Mini-DVI ports.
To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info (and then System Report if you’re running 10.7 Lion or 10.8 Mountain Lion). When System Profiler comes up check the Model Identifier and post it back here.

How to get rid of the old songs from iPhone that do not show up in iTunes?

Every time I delete my entire iTunes library and sync iPhone with it, my music is still loaded with old songs but do not appear on my iTunes. And when I add new songs to my library, the new songs get mixed with old songs.
How to get rid of the old songs?

hey buddy....u have to delete the songs from ur iphone....i have got the same issue.....songs are not showing in itunes!!!!!

How to get rid of the "time out" when using DAQ AI in the example program

I try an example file called "AcqVoltageSamples_IntClkDigRef" (Visual C++ .NET). It works great. However, if the program has not recieved the data, it sent out a timeout message. How to get rid of the "time out"? I cannot find anywhere in the code. Is this a property I have to reset somewhere else?
Thank you,
Yajai.

Hello Yajai,
The example program will use the default value for timeout, 10 seconds. To change this, you will have to set the Stream.Timeout value. I inserted this function into the example and set it equal to -1, and the program will wait indefinitely for the trigger signal without timing out. Please see the attached image to how this was implemented.
I hope this help. Let me know if you have any further questions.
Regards,
Sean C.
Attachments:
SetTimeout.bmp ‏2305 KB

How to get rid of the on screen volume display?

how to get rid of the on screen volume display, it stays on even after reboot. and when i hit the volume button another one shows on top of it.

Sounds like a key on the keyboard is stuck down. Does it disappear if you disconnect the keyboard?

How do i turn off the startup sound on macbook pro?

how do i turn off the startup sound on macbook pro?

You don't. You may find some third-party software that will, however. Try Auto Mute.
Alternatively, you can try this:
I think this is the best and simplest solution. Open a Terminal window and type (or copy/paste) the following to turn down the startup noise:
sudo nvram SystemAudioVolume="%00"
Press RETURN.
And to restore it to the original value type:
sudo nvram -d SystemAudioVolume
Press RETURN.
That's all folks.

What is the best way to work with mixed media in 1080 timeline?

Hi there,
I have a project shot mostly in 1080 24p but a bit of 720 24p and 4x3 30p footage.
What is the best way to work with this mixed media?
Thanks!
Steven

Hi Shane,
Ok just to recap (thanks for being patient by the way)...I have put some questions in here...feel free to write in caps to respond and we'll put this baby to rest!
1) I will work in a 1080p FCP sequence, correct?
2) HD 1080p footage captured as applepro res hq I will leave as is and work with?
3) HD 720p footage which was captured as applepro res hq. Can I just drop in 1080 timeline and let FCP do its work? Or should i run through compressor, if so what setting shall I submit it too?
4) I dont have a budget for an external hardware to convert SD to HD...should I capture my SD Beta through Final Cut and just leave and let FCP do its work? Or should I run through compressor? If so what setting shall I submit it too?
5) For for my master sequence in FCP am I not using an I-Frame format apple pro res if I am using my apple pro res hq 1080 footage as my formatted sequence? I am not sure what you mean by GOP?
6) I also found some 60p footage 1080p XDCAM compressor shot with the same XDCAM camera. I put in the 1080p 24p timeline but it was pretty choppy...any ideas of this conform?
Thanks very much for all your help it has gone along way,
Steven
Saying what CODECS you are working with was my question. 1080, 720, 4:3...really says nothing. There are a dozen 1080 codecs, another dozen 720 codecs, and nearly 100 4:3 formats.
Best to capture all the footage to one uniform codec.
Second best is to work with one format and let FCP conform the rest to that...IF and only IF that format is an I-Frame format like ProRes. GOP formats as master sequence formats cause TONS of issues.
What I'd do is work 1080 ProRes, just add the 720p footage (Use Compressor to convert it if you didn't have a lot, but if you had a lot, just add it), but I'd capture all the SD 4:3 footage via a Kona 3 or Matrox MXO2 as 1080 ProRes. Hardware conversion of SD to HD is much better than anything FCP can do. AE might do good as well. But then use Compressor to convert 29.97 footage captured (you can't convert 29.97 to 23.98 when you capture) to get to 23.98.

How can I mix up the photos in a file?

I am doing a slide show for my child's teacher. I am using about 400 photos from 6 different events. How can I mix up the photos so the slide show is in a random order rather than chronological?

So, you're exporting photos from Lightroom, then rolling them into a slideshow using a different program, and that program does not support randomization - did I get that right?
If so, then indeed: it's as Paige said: no way to export in random order without a plugin or script or something.
Here's one possibility: put them in a collection, then shuffle the collection using the "Shuffle Photos In Collection" script available here:
http://www.robcole.com/Rob/ProductsAndServices/MiscLrPlugins/#MiscScripts
(they're free scripts I wrote - kinda like plugins, but simpler..).
Then export all photos in the collection with a sequence number prefix so they're in proper order (alphabetically) on disk - then your slideshow program will have them in random order - makes sense? (try it before answering ).
Rob

Help me on choosing the best sound quality for my music on my itunes!!!

I heard that AIFF Encoder is the best sound quality you can import your music into Itunes. On the settings for AIFF Encoder do you know what Sample Rate, Sample Size, and what Channel I should set it to? Should I just leave them on Auto? How about if I have a HDCD? What are your suggestions?

I agree use Apple Lossless. Bizarrely it is also easier to share Apple Lossless with Windows Media Player than AIFF.
I have my entire iTunes library in Apple Lossless and shared with WMP and also Media Center 2005. I can also use it in full lossless quality with Roku SoundBridge, Apple TV, iPhone, iPod, etc. etc. etc.

How to get/mix/stream the best sound in/out with 2 different audio source ?

Similar Messages

Maybe you are looking for