How to get WHAT U HEAR option for PCI Express X-Fi Titanium sound card and Windows 7

how to get WHAT U HEAR option for PCI Express X-Fi Titanium sound card and Windows 7 ? Is it on the basic driver? or do you have to install some other software?
jane

You have to install the rest of the software(s) for the sound card. The software is (if it is with the installation CD, though) called "Creative Smart Recorder" or something like that.

Similar Messages

S/PDIF options for PCI Express X-Fi Xtreme Audio sound card non-existant!

Hey guys, I've been searching around for this for a while now and I still come up with anything...
I currently have a PCI Express Sound Blaster X-Fi Xtreme Audio sound card installed in my PC, and this cound card has a built-in optical output port. I have been trying to set the sound card to use this port and I still can not find anyway around it.
I have searched the support pages and they always go back and say that I can enable audio on that port using the Digital I/O icon in the media console (I'm in Entertainment mode btw, doesn't seem like I can change that). However, I don't have that icon present in my media console. I tried upgrading drivers, updating software but still to no avail
So right now i'm running Windows XP (32-bit) and what seem to be the latest software and drivers for this card, and none of this is making any sense to me and so I believe that I am going mad!
I am honestly starting to believe that the port is just there for decoration...

This seems to be a fairly common issue across out in the market.
Do you not think it would be worth while chasing this down internal to Creative and sharing the solution with everyone?
Pointing us one at a time to support for what should be readily available drivers doesn't make a lot of sense.

How to get the change mode option for the line items in SC

Hi Everybody,
1. when the SC has 2 line items and in that if both the line item are rejected by the approver and the requester is receiving it for accept changes and when he click on the change button and wants to change the line items of both the rejected one, the change is enable and the requester can do the changes in the line items of the shopping cart which is working fine. but in the other case
2. when the SC has 2 line items and in that if any one of the line item is rejected and other one is approved by the approver and the requester is receiving it for accept changes and when he click on the change button and wants to change the line item of the rejected one, the change is getting disabled but for the approved line item the requester can able to do the changes.
so can anyone help me out how to solve this issue that if any one line item is rejected in the shopping cart also it should get the editable mode when the requester wants to do any changes.
thanks in advance.

Hi Everybody,
1. when the SC has 2 line items and in that if both the line item are rejected by the approver and the requester is receiving it for accept changes and when he click on the change button and wants to change the line items of both the rejected one, the change is enable and the requester can do the changes in the line items of the shopping cart which is working fine. but in the other case
2. when the SC has 2 line items and in that if any one of the line item is rejected and other one is approved by the approver and the requester is receiving it for accept changes and when he click on the change button and wants to change the line item of the rejected one, the change is getting disabled but for the approved line item the requester can able to do the changes.
so can anyone help me out how to solve this issue that if any one line item is rejected in the shopping cart also it should get the editable mode when the requester wants to do any changes.
thanks in advance.

My ipod nano 6th gen fell out of my pockey and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed

My ipod nano 6th gen fell out of my pocket and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed? It is pretty frustrating, it fell from about 3 feet out of my pocket and now looks like it was beaten by a hammer.

Debbie:
deborahfromwindsor wrote:
he advises restarting by inserting the OSX disc and pressing down the C button to reboot from there then selecting disk utility, hard disk and repair.... Does he mean me to hold down the C key on the alpha keyboard or the ctrl key?
Should I just ask for my money back??? If it is a simple repair do I just literally push the disc in, push the power button and hold down the C button?
That's where I would begin, too, with
Repair Disk
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.TStatus of HDD at the bottom of right panel, and report if it saysanything but Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
If DU reports errors it cannot repair you will need touse autility like TechTool Pro,Drive Geniusor DiskWarrior
First we need to determine if the issue you are experiencing with the computer is software or hardware based. Once we have gotten things sorted out there should be time enough to make you decision about keeping or returning it.
cornelius

How to get calender in f4 help for select options in module pool (URGENT)

Hi All,
how to get calender in f4 help for select options in module pool
Please help .
Thanx in advance,
amruta

Hi Amruta,
First of all, you can not create select-options directly in module pool.
For creating <b>select-option is dialog prog</b> follow these steps:
1. create your selection screen model as subscreen by:
SELECTION-SCREEN BEGIN OF SCREEN 2000 AS SUBSCREEN.
PARAMETRS: P_MATNR LIKE MARA-MATNR.
SELECT-OPTIONS: S_BISMAT FOR MARA-BISMAT.
SELECTION-SCREEN END OF SCREEN 2000.
2. create a screen ( example 100 ) in your module-pool dedicated for selection-screen. on this screen layout sketch a sub-screen name like subscree_2000.
3. write this bit of code in PBO and PAI of the screen 100;
CALL SUBSCREEN SUBSCREEN_2000.
4. include this code in PBO:
INCLUDING SY-REPID '2000'
6. write user_command of PAI, call screen which is going to executable after selection-screen.
5. create a transcation for this dialog module pool with screen 100.
6. execute this transaction and you can see it's behaving like cool with select-options.
After that in [bprocee on value-request]</b>, use F4_DATE for both from and to option field.
Hope it will solve the problem.
Regards
Krishnendu

All I ask is that I get what I'm PAYING for, please........

First of all, let me start by saying I'll be very surprised if this actually gets posted. Took about 10 mins just to get to this point. Funny how of all sites, Verizon's load the slowest. You'd think they'd take extra measures to make this a better experience than getting asked over & over to log in after you already did, then it takes minutes (instead of seconds) just to load a page that needs another page that needs another page...
Here is my deal with Verizon. I've been a many-years customer of both home phone & DSL. Up until the last couple months I've had some issues, nothing that couldn't be resolved, but for the last couple months my internet is so slow it's like being back on dialup, ugh.. About 10 days ago I finally got fed up enough to give them a call.
Something I need to say first, about out-sourcing. I'm not a fan of it but I understand to an extent why it's being done. All I ask for though is that when I do talk to someone I can at least understand what they are saying to me. That's really important to me, I'm sure it's important to you as well. When I say "you people" I mean Verizon people, I'm not referring to anyone's race, color, etc., etc.,...
OK...so I call them up & 1st guy is "DJ" he said that was what to call him since after 3 tries I still couldn't pronounce his name correctly. I could understand him for the most part & I really do believe he tried his best to help me with my problem. I was on the phone with DJ for I dunno, an hour, maybe hour & 1/2.
Looking back on it, I don't think he was the best informed person, I don't think any of them were. We talked & I let him access not only my 2 yr old desktop but my precious not even 5 month old laptop. We tried this, this, that, that.....it was just a big run around IMO. DJ dumped my temp internet files, cookies, blah blah blah.......same on laptop. Finally, after all the time on the phone he did exactly what I knew would happen. He opened up my gateway page & said "see where it says you're getting this speed, etc? That's what you're getting." I don't care what that page says, I'm not getting what I'm paying for!
Due to the crappy service I've been getting I do speed tests daily & do them several times per day. I use speedtest.net & also internetfrog.com as well as a couple others if I need them. What amazes me is that after running me around on the phone for well over an hour, they wind up opening my gate page & then blame me, my 2 computers, my ability to see there's a real problem here. I was asked to subscribe to a "professional tech service" of some sorts at $14.99 a month & was then told that's all that could be done for me. I was then transferred to the so-called supervisor who was nothing short of RUDE, I was happy to finally end my call. The next day a woman called, I could barely understand a word she was saying so I told her I wasn't up to talking & hung up.
Call me **bleep** but I decided to "upgrade" my service. It said for 6 months I'd get a $10 rate reduction (which is cheaper than my current pkg) and I figured I'd at the very least, get better than what I was getting for only a few bucks more. WRONG!! They kicked in my new "better" pkg last night. I do get better speed test results but only at "non-peak" times & even then, they are sketchy.
I haven't done a ton of reading as of yet but so far my impression is they're over loading the hubs in my area, too bad for me. My speed tests are no better now than what they were before I "upgraded" my service. A good example is this...it took 25 mins to download a 20 mb file...tried on both computers & it was the same for each of them. If I had just one computer then sure, maybe I'd blame it on that. I have a 2 yr old desktop with XP that has never given me any problems, I do my scans & keep things running smooth. My laptop has W7 & isn't even 5 months old. You can't tell me that both are simply "screwed up" and need professional help when I know **bleep** well it's not on my part but is on Verizon's!
I am stuck with Verizon due to where I live, what options are actually available at this time. All I am asking for is that I am given what I'm paying for, what they say they're willing to provide. I do not appreciate all the running around, the bad accents with less than understand spoken words of what they consider to be "english"....I can't understand wtf they're saying to me! So frustrating, it really is. *sigh*
Sorry for the rambling but if you've read this far I think you're in the same boat I am. They used to be a company I truly did admire, now I'm just wondering how to dump them. I'm very sad about this, I can't count on Verizon any longer to be reliable & more important...that they care other than me paying my bill. ~Laurie

LauriesWorld wrote:
First of all, let me start by saying I'll be very surprised if this actually gets posted. Took about 10 mins just to get to this point. Funny how of all sites, Verizon's load the slowest. You'd think they'd take extra measures to make this a better experience than getting asked over & over to log in after you already did, then it takes minutes (instead of seconds) just to load a page that needs another page that needs another page...
Here is my deal with Verizon. I've been a many-years customer of both home phone & DSL. Up until the last couple months I've had some issues, nothing that couldn't be resolved, but for the last couple months my internet is so slow it's like being back on dialup, ugh.. About 10 days ago I finally got fed up enough to give them a call.
Something I need to say first, about out-sourcing. I'm not a fan of it but I understand to an extent why it's being done. All I ask for though is that when I do talk to someone I can at least understand what they are saying to me. That's really important to me, I'm sure it's important to you as well. When I say "you people" I mean Verizon people, I'm not referring to anyone's race, color, etc., etc.,...
OK...so I call them up & 1st guy is "DJ" he said that was what to call him since after 3 tries I still couldn't pronounce his name correctly. I could understand him for the most part & I really do believe he tried his best to help me with my problem. I was on the phone with DJ for I dunno, an hour, maybe hour & 1/2.
Looking back on it, I don't think he was the best informed person, I don't think any of them were. We talked & I let him access not only my 2 yr old desktop but my precious not even 5 month old laptop. We tried this, this, that, that.....it was just a big run around IMO. DJ dumped my temp internet files, cookies, blah blah blah.......same on laptop. Finally, after all the time on the phone he did exactly what I knew would happen. He opened up my gateway page & said "see where it says you're getting this speed, etc? That's what you're getting." I don't care what that page says, I'm not getting what I'm paying for!
Due to the crappy service I've been getting I do speed tests daily & do them several times per day. I use speedtest.net & also internetfrog.com as well as a couple others if I need them. What amazes me is that after running me around on the phone for well over an hour, they wind up opening my gate page & then blame me, my 2 computers, my ability to see there's a real problem here. I was asked to subscribe to a "professional tech service" of some sorts at $14.99 a month & was then told that's all that could be done for me. I was then transferred to the so-called supervisor who was nothing short of RUDE, I was happy to finally end my call. The next day a woman called, I could barely understand a word she was saying so I told her I wasn't up to talking & hung up.
Call me **bleep** but I decided to "upgrade" my service. It said for 6 months I'd get a $10 rate reduction (which is cheaper than my current pkg) and I figured I'd at the very least, get better than what I was getting for only a few bucks more. WRONG!! They kicked in my new "better" pkg last night. I do get better speed test results but only at "non-peak" times & even then, they are sketchy.
I haven't done a ton of reading as of yet but so far my impression is they're over loading the hubs in my area, too bad for me. My speed tests are no better now than what they were before I "upgraded" my service. A good example is this...it took 25 mins to download a 20 mb file...tried on both computers & it was the same for each of them. If I had just one computer then sure, maybe I'd blame it on that. I have a 2 yr old desktop with XP that has never given me any problems, I do my scans & keep things running smooth. My laptop has W7 & isn't even 5 months old. You can't tell me that both are simply "screwed up" and need professional help when I know **bleep** well it's not on my part but is on Verizon's!
I am stuck with Verizon due to where I live, what options are actually available at this time. All I am asking for is that I am given what I'm paying for, what they say they're willing to provide. I do not appreciate all the running around, the bad accents with less than understand spoken words of what they consider to be "english"....I can't understand wtf they're saying to me! So frustrating, it really is. *sigh*
Sorry for the rambling but if you've read this far I think you're in the same boat I am. They used to be a company I truly did admire, now I'm just wondering how to dump them. I'm very sad about this, I can't count on Verizon any longer to be reliable & more important...that they care other than me paying my bill. ~Laurie
I could have written this EXACT same message - down tot he "upgrading my service" for less money than I was currently paying, I figured, it couldn't hurt, right?
wrong
The CS guy told me that my wirespeed modem was still "the best they had" (which is a joke as I don't even think they offer this anymore.
At least now, I am paying for 1.5mbps and I'm not getting it. They WILL refund this money every month until I get something. I'm simply not going to pay it anymore.

What are my options for a data plan + upgrade?

So my old phone (Samsung Intensity) broke today, and I'm looking to upgrade to a smartphone. I would prefer an iPhone, but really it's not that big of a deal if I get a Droid. I'm eligible for an upgrade currently. What are my options for a smartphone and a data plan? I'm looking for what's the cheapest option as far as this goes. People tell me an iPhone is free with an upgrade, and that the cost is $20 a month, but I just want to be sure.

Unless you have an old calling plan, you should be able to add a tiered data plan for your new smartphone (i.e., $30 for 2 GB). If you switched to the Share Everything plan, your monthly cost would be $40 line access + at least $50 for 1 GB data (includes unlimited minutes/texts and mobile hotspot, although the hotspot data usage comes out of your data plan), plus, of course, taxes/fees (and insurance, if applicable).
You can check pricing for phones via your on-line MyVerizon account if you click on the Upgrade button. If you are mainly interested in free phones (keep in mind that there's a $30 upgrade fee), there's the Nokia Lumia 822, Spectrum 2, Droid Razr M, iPhone 4, Galaxy Stellar, Marauder, Rhyme, and the Lucid. Several of those are 3G phones.

Whats the best option for passing parameters between tf?

Dear All,
I have three Task Flows:
1. TF1
     - Main Taskflow that calls a web service to gather its data
2. TF2
     - Secondary taskflow which receives a parameter and depending on the value of the parameter received will display its data accordingly. Generally any data
     is feed from TF1
3. TF3
     - Same as TF2Use Case:
All three TF will be dropped to the page as Regions in a Webcenter Portal Application. Changes in TF1 should propagate into TaskFlow 2.
Question:
1. How do I configure that changes in TF1 would be propagated back into task flow 2 and 3 and whats the best option for this?
2. At runtime, user can choose to edit the page and TF2 and TF3 can be deleted but TF 1 should remain as the source of information.
Given the scenario above:
- shall I wire the taskflows via page parameters?
- contextual events?
What are the considerations that needs to be thought of. I havent done such requirements before.
Please help.
Webcenter 11.1.1.6

Contextual events seem to be the best case.
This way you can trigger whenever you want. Web services can be slow so you can trigger the event when the gathering of the data has been finished and then pass some value on the event.
An event also has a payload so it's an ideal scenario to add the data from the service on it so you can use it in the other TF's.
In order to manage the deletion of the TF1, you can use the UI events on the composer: http://docs.oracle.com/cd/E23943_01/webcenter.1111/e10148/jpsdg_page_editor_adv.htm#CHDHHFDJ

TS4006 Last known fix for Find my iPad? How is this not an included option for devices that are currently turned off. Absolute no brainer. Thief steals the iPad and turns it offline, or user loses it while it has low battery, lost forever. Brilliant.

Last known fix for Find my iPad? How is this not an included option for devices that are currently turned off. Absolute no brainer. Thief steals the iPad and turns it offline, or user loses it while it has low battery, lost forever. Brilliant.

If the iPad was running iOS 7, the thief/finder will not ever be able to use it.
iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
Apple (and no one else) can not assist (with serial number or iCloud) in finding a lost or stolen iPad.
Report to police along with serial number. Change all your passwords.
These links may be helpful.
How to Track and Report Stolen iPad
http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
Reporting a lost or stolen Apple product
http://support.apple.com/kb/ht2526
What to do if your iOS device is lost or stolen
http://support.apple.com/kb/HT5668
iCloud: Locate your device on a map
http://support.apple.com/kb/PH2698
iCloud: Lost Mode - Lock and Trace
http://support.apple.com/kb/PH2700
iCloud: Remotely Erase your device
http://support.apple.com/kb/PH2701
Report Stolen iPad Tips and iPad Theft Prevention
http://www.stolen-property.com/report-stolen-ipad.php
General steps to follow for a Stolen iPad
http://stolen-ipad.com/
How to recover a lost or stolen iPad
http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/
How to Find a Stolen iPad
http://www.ehow.com/how_7586429_stolen-ipad.html
What NOT to do if your iPhone or iPad is lost or stolen
http://www.tomahaiku.com/what-not-to-do-if-your-iphone-or-ipad-lost-or-stolen/
Apple Product Lost or Stolen
http://sites.google.com/site/appleclubfhs/support/advice-and-articles/lost-or-st Len
Oops! iForgot My New iPad On the Plane; Now What?
http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
If you don't know your lost/stolen iPad's serial number, use the instructions below. The S/N is also on the iPad's box.
How to Find Your iPad Serial Number
http://www.ipadastic.com/tutorials/how-to-find-your-ipad-serial-number
iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number
http://support.apple.com/kb/HT4061
 Cheers, Tom

Does anyone know how to get Adobe to stop charging for a subscription that is no longer being used?

Does anyone know how to get Adobe to stop charging for a subscription that is no longer being used?

For full details on cancelling a membership and subscription see the following page:
Cancel your membership or subscription | Creative Cloud
Depending on where you are in your subscription cycle / membership and the type of membership
If you have an individual membership, and opted for the annual membership (lower monthly fee). If you are cancelling in the middle of your membership, then you would be billed 50% of what's left of your membership for the remainder of the year, basically that would then in $$s become more like having taken out a month-by-month membership (higher monthly membership fee).
If you are in the last month of your annual membership or your are on a month-by-month membership, you can log into your creative cloud account, cancel the plan yourself (no additional charges apply), by logging in with your Adobe ID and password, click your name in top left of screen and click on Manage Account.

Sound Blaster X-Fi Titanium... no "what you hear" option

This is my second system with this sound card.
My last one, when I wanted to record off the air or off my sound card there used to be a drop down called "what you hear" for your source in.
Where did it go?
I can still record on the go but I have to make a couple changes to the setup.
Also, did this used to safe your files to .mp3's ?
...anyway, I'm looking for the ''what you hear" option in my recorders.

Thanks again.. where do I find the applications that are available for this sound card?
Is there a webpage that contains these, if so, could you direct me to this?
The Sound Bank is installed and I do have the virtual keyboard now, thanks.
I can't hear it for some reason, I'm pretty computer savvy and I can't think of anything I did wrong. I mean all I did was download and installed a driver.
Thanks

How to get the "last changed by" for a set of function modules?

How to get the "last changed by" for a set of function modules?
is there any table to get it??

See [this|Re: Date of creation of function module] I posted earlier.
>TFDIR will give you the name of the function group program and the include number.
>E.g. SAPLZFUNCGROUP Include 01.
>From this you can construct the include name: LZFUNCGROUPU01.
>You can look this up in TRDIR to find the creation date (CDAT) of the function module.
In your case, you need unam and udat.
matt

I create my apple id from my boyfriend macbook and its says that I have to review my itunes information , when I get to the credit card number info etc. Its keep asking me for that I dont have any credit card and I dont want to put any , what should I do?

I create my apple id from my boyfriend macbook and its says that I have to review my itunes information , when I get to the credit card number info etc. Its keep asking me for that I dont have any credit card and I dont want to put any , what should I do?

You cannot use that ID without a credit card. You did not create your account correctly. There is very specific way in which you must create your account if you do not want to use a credit card. If you don't have a credit card, you will have to start all over again.
1. You will have to sign out of that ID before you can create a new one. Settings>iTunes & App Store>Apple ID>Sign out.
2. You cannot use the email address that you used for the first ID that you created. You will need to use another email address now
3. You have to download a free app in order to start the new Apple ID process.
Read this before proceeding.
http://support.apple.com/kb/HT2534

Hi I replaced my hard drive on macbook and I want to install mac osx10.5 with the CD that came with the macbook. When I run the CD after a while I get the page showing language options for 2 second then a gray screen appears and nothing happens

Hi I replaced my hard drive on macbook and I want to install mac osx10.5 with the CD that came with the macbook. When I run the CD after a while I get the page showing language options for 2 second then a gray screen appears and nothing happens. I partitioned my hard drive and I tried installing Microsoft windows and that worked just fine. But I do not understand why it wont install mac os x 10.5????? PLEASE HELP ME. Thanks Hamid

Try a new post in the 10.5 Installation forum.
DALE

How to get the current month value for a customer exit variable?

How to get the current month value for a customer exit variable?
And also if we have an InfoObject with date value (including date, month, year), then how to derive the month value from this date type of Char.?
Thanks!

Hi Kevin,
Check here........
Re: Customer Exist for "From Current Date To Month End"
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/25d98cf6-0d01-0010-0e9b-edcd4597335a
Cal month
Regards,
Vijay.

How to get WHAT U HEAR option for PCI Express X-Fi Titanium sound card and Windows 7

Similar Messages

Maybe you are looking for