How to go to EndPoint

Hi All,
Please let me know how to go to display end point in XI from SAP Logon.
I have to change old URL with new URL. Not sure for change URLs at EndPoint.
Is it correct way or not. Please correct me if am wrong.
Thanks,
Subbu.

Hi Subbu,
Create a new Namesapce and copy the objects from exisitng URL.Choose Message interface, right click Using Copy object, check the box for With All Dependent Objects and choose u r new Namespace.In this way do for MM & IM.And recreate the Configuration scenario.
If you encountering any errors post the same.
Cheers
Veera

Similar Messages

How to configure service endpoints of custom webservice in SharePoint 2013?

Hi,
I have created a custom webservice in SharePoint 2013. I placed it in a sub folder under the ISAPI folder. I followed the instructions of this article: http://msdn.microsoft.com/en-us/library/office/ff521581(v=office.14).aspx. The webservice works
great, however when I try to send a large file I get the message "413 Request entity is too large".
After some searching I found out that you can create a web.config in the subfolder and define the endpoints and bindings, after which I get an error that there is already an endpoint defined for the specified URI. I believe this has something to do with
the BasicHttpBindingServiceMetadataExchangeEndpointAttribute but I'm not sure.
Can anyone help me solve this issue?
Regards,
Sander

Hi,
According to your post, my understanding is that you want to configure service endpoints of custom webservice in SharePoint 2013.
Per my knowleadge, after you add a reference to Microsoft.SharePoint.Client.ServerRuntime, you can use the BasicHttpBindingServiceMetadataExchangeEndpointAttribute.
In VS go to the add reference and paste the following: C:\Windows\assembly\GAC_MSIL\Microsoft.SharePoint.Client.ServerRuntime.
In addition, please make sure you create the custom web service correctly.
For more information, you can refer to:
SharePoint 2013: Create a Custom WCF REST Service Hosted in SharePoint and Deployed
in a WSP
How to create Custom Web Service WCF (REST) in SharePoint 2013
Adding custom WCF services to a SharePoint 2013 farm solution using Visual Studio 2012
"BasicHttpBindingServiceMetadataExchangeEndpointAttribute" could not be found
Best Regards,
Linda Li
Linda Li
TechNet Community Support

How to change the endpoint url of the siebel service ?

Hi All,
JDev : 11.1.1.5
I am fetching data from the siebel webservice. I created the proxy client from the Siebel WSDL in the JDeveloper. It was working fine.
Now the endpoint URL(Server) is changed. This service fails to connect to that server. The service name is same.
I want to fetch the end point urls from a property file, so that, even again if the server is changed, i have to change it in my property file.
How to change the End point URL at runtime before calling the service ?
This is my endpoint URL.
http://oa8181.us.oracle.com:10800/eai_enu/start.swe/#%7Bhttp%3A%2F%2Fpolicing.oracle.com%2F%7DPolicing_spcQuery_spcIncidents_spcWF?wsdl?SWEExtSource=WebService&SWEExtCmd=Execute&UserName=AUSTINP&Password=AUSTINP
Now it is pointing to this
http://oa8023.us.oracle.com:7777/eai_enu/start.swe/#%7Bhttp%3A%2F%2Fpolicing.oracle.com%2F%7DPolicing_spcQuery_spcIncidents_spcWF?wsdl?SWEExtSource=WebService&SWEExtCmd=Execute&UserName=AUSTINP&Password=AUSTINP
Give me some solution.

See if this helps:
http://kingsfleet.blogspot.co.uk/2008/12/controlling-what-service-proxy-uses-at.html

How to specify HTTPS endpoint for web role?

We're using CloudService of Azure, and within there are two web roles (A and B), we hope both use HTTPS protocol.
For web role A, we specify the endpoint like this:
<Endpoints>
<InputEndpoint name="WebPortalEndPoint" protocol="https" port="443" certificate="WebPortalCertificate" />
</Endpoints>
For web role B, we do like:
<Endpoints>
<InputEndpoint name="WebApiEndPoint" protocol="https" port="444" certificate="WebApiCertificate" />
</Endpoints>
So after deploying to cloud, we can use this url to visit web role A: https://name.cloudapp.net, but for web role B, we couldn't visit like: https://name.cloudapp.net:444.
Do we miss something? What ports can we use if we want to add more web role to cloud service which use HTTPS?

Hi,
How did your set the endpoints on your azure projects? I set my test project like this:
WebRole1 Endpoints:
WebRole2 EndPoints:
I can use the 443 to access the webrole1, and use 8081 to access webrole2. If your setting didn't work, I suggest you could reset and re-deployed again.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Anonymous Client - How Does the Service Endpoint Know Which Operation

I am using a client (Axis2) to invoke a service through their Anonymous capabilities. When this is done, you create a ServiceClient with the default constructor and call one of its methods based on the MEP that I want to perform. In doing this, the ServiceClient is not aware of the WSDL, the SOAP Action, the Service Name, the Port Name...only the Endpoint URI of where I want the post to be sent.
So I have a Service Endpoint running in WebLogic 10 and constructed using EJB3. We are using JWS to generate the WSDL and other web service configuration files from our SLSB. My WSDL has two operations with different request messages and different response messages. When I send the Anonymous client request, the Service Endpoint correctly processes the request and send the correct response.
How is this happening? Does the EJB3 Service Endpoint know how to process or bind the message based on the root element of the SOAP Body? And is it just working by circumstance. So if I had two operations with the same request message and different responses, would it fail?
Thanks -jay
Edited by: jaybytez on Jun 13, 2008 5:35 PM
Edited by: jaybytez on Jun 13, 2008 5:36 PM

Unfortunately you have to make some changes in your code.. to find the pictures you need to replace:
ImageIcon pic = new ImageIcon("pic.gif");
with
URL url = MyClass.class.getResource("pic.gif");
ImageIcon pic = new ImageIcon(url);
where MyClass is the class which needs to load the resource.
I hope this helped you! /Pingu

How to connect multiple endpoints into one straight one line

Hello everybody,
I made a sihlouette of buildings and I"m wanting to connect the bottom open endpoints into one straight line. The reason I'm doing this is because I want to add a fill to the sihlouette as a whole instead of doing them one by one.
I tried joining paths but it can only be two open endpoints at a time. As you can see with the picture below, I have many open endpoints.
The pen tool only joins two open endpoints. If I try to continue to try to add another endpoint to the same line, the pen tool becomes a "minus anchor point" tool and messes up the shape of the buildings.
Of course, I thought of just making each building seperate and grouping them together. However, if I do that, a issue occurs because I have certain buildings that are "in front" of each other (not in the sense of layers, but the image as a whole). I purposely made the sihlouette look like some buildlings are in front of each other and some are behind each other.
I hope I am making sense. I don't even know if what I am doing is possible.
I added a picture below so everybody can see what I am trying to achieve. Any help would be greatly appreciated.

Thank you all for being very helpful. As you can see, I have much to learn.
@Jonika
I have tried the pathfinder but the images become messed up and not exactly the way I want it.
@jacobbugge
I did and this is what happens.
I tried to do that in the first place but it wasn't working so I'm stuck trying to figure out a different way.
To everybody else:
What I eventually want to do is to do a clipping mask so I can use a picture that will show up on the inside of the buildings. And if I do it the way it is right now, it won't necesarily fill in all of the buildings. If you see the picture above, it cuts off the areas that have no endpoints to the other side.
The buildings that have two points on the bottom, I am able to fill without connecting the endpoints. That is true. However, for example, the far left and the far right buildings, do not fill correctly because they do not have an endpoint that is right next to it that it can connect to. This is getting difficult to describe haha.
The front buildings are no problem. However, the buildings "behind" the other buildings, how can I get these to fill in all the way?

How to connect 3 endpoints to 1 reserved row

Is it possible to set up a route group in MAX that connects 3 endpoints to a single row of a 4x128 matrix card that has been reserved for routing?
I need to have all four rows set as reserved for routing so I can set all my other route groups up by specifing endpoints.
Thanks,
Jason
Solved!
Go to Solution.

Hi Jason,
I'm assuming that you're using NI-Switch 2.3. To my knowledge, NI Switch Executive was only released with the following versions: 2.0, 2.0.1, 2.1, 2.1.1, 3.0.
The option you listed is not your only option, but it is the option that I recommend for prior versions of NI Switch Executive. Remember that you can use Route Groups to store the separate row to column connections so that only one connect call is required.
An additional option you have is to use two NI Switch Executive Virtual Devices. One Virtual Device has the PXI-2532 rows reserved for routing and the other Virtual Device doesn't. Each time you want to connect multiple columns to the same row, you could close the session to the "reserved for routing" Virtual Device and open a session to the other Virtual Device (where you connect multiple column endpoints to the same row). Note that you cannot have sessions open to both Virtual Devices at the same time because they would attempt to share the same hardware.
Is upgrading to NI Switch Executive 3.0 a possibility? There are two additional features you would enjoy:
Intuitive Graphical Configuration Utility
Graphical point-and-click configuration environment - enables rapid development of switch systems
Edit Channel Aliases in place
Build complex routing groups by clicking on matrix crosspoints one at-a-time
Microsoft Excel Import/Export
Easily export NI Switch Executive configuration into Microsoft Excel environment
Increase channel count through simple text manipulation
Easily import newly edited files back into NI Switch Executive
It would be great if upgrading were an option. Let me know if you have further questions!
Chad Erickson
Switch Product Support Engineer
NI - USA

How to clear the endpoint directory in NAC Profiler

Hi All,
I want to delete all the endpoint discovered and profiled by the NAC Profiler.
Can anybody guide me on this, such that I can delete all the endpoint discovered and profiled by the Profiler in one go.
Thanks,
Abuzar.

Hi,
you can either try to reboot or go to "configuration", "apply changes" and then "re-model".
I don't think you can simply delete everything, you just re-profile everything from scratch
Nicolas

Cisco ISE: How to match an endpoint belong to an identity group ?

Hello,
I am running Cisco ISE 1.1.4.218 in a standalone environment.
I am trying to setup Compound Condition for Authorization.
I would like the condition to match the MAC address of the calling machine to the internal endpoint MAC address list.
I created 1 endpoint identity group and 2 children groups
- GroupParent
- ChildA
- ChildB
I put the MAC address of my machine in the group ChildA.
In my condition, I tried the following:
IdentityGroup:Name, Equals, ChildA
IdentityGroup:Name, Equals, GroupParent:ChildA
IdentityGroup:Name, Match, .*(ChildA).*
I even tried to put the MAC address in the GroupParent level and tried to update the condition to be:
IdentityGroupName, Equals, GroupParent
IdentityGroupName, Match, .*(GroupParent).*
But no one of these options worked.
I am almost sure that in Cisco ISE 1.1.1, it was working fine. But I updated today to 1.1.4 and I cannot make it work.
Can anyone help me ?
Best regards,
David

You could try the following to match only the parent group
IdentityGroup:Name EQUALS GroupParent
You could try the following to match only child group A
IdentityGroup:Name EQUALS GroupParent#ChildA
You could try the following to match all child groups of GroupParent
IdentityGroup:Name STARTS_WITH GroupParent
Please rate if this helps

How to manage Forefront Endpoint Prorection Security Client 2010 with SCCM 2012

Hi
I've sucessfully installed System Center Configuration Manager 2012
and now I 'd like to push/deploy Forefront Endpoint Protection Client 2010 on client machines.I also know that Microsoft embedded Forefront Endpoint Protection in SCCM 2012 so that you can manage FEP from single SCCM 2012 console.Now
when I try to push FEP client on client machines using Default Client Settings
then I've found that all Endpoint Protection settings are greyed out !
Do I need to install Forefront Endpoint Protection 2010 or 2012 Server (which is beta) with SCCM 2012, in order to deploy FEP client or is there a workaround or solution to resolve this ?
Thanks
Sohail

Hi,
Endpoint Protection 2012 is builtin in SCCM 2012, you simply add the Site Role called Endpoint Protection either on your CAS if you have one of those or on your Primary site Server. FEP is no longer a standalone installer and it is a released product and
no longer Beta.
Then the Endpoint Protection Client Settings will no longer be greyed out and you can deploy the System Center 2012 Endpoint Protection client.
http://technet.microsoft.com/en-us/library/hh508760.aspx
regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Zenwork 11rc3 beta = on how to publish the endpoint policy

To all the PRO,
As now i am testing the beta version of the ZENWORK 11 rc3 , but the after trying to read most area of the documentation , i still unable to publish the policy to the client system . Where by the client also had install the agent program , yet there is no sign of that the client policy was updated .
Even the server side was able to view the Client System , but then i was unable to push the endpoint security policy into the client side .
is there was something when wrong ? or is there anything else i was left out ?
kindly advise .

nxgame,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

How do I excude a specific folder from Endpoint Protection scans on *ANY* drive?

I see this question come up over and over again, and I still have not managed to find a straight answer. Sure hope someone here can help. I am in a situation where I have the same exact folder name on multiple random drives that I need to exclude from Endpoint
Protection client scans. So for example here is what I need to exclude:
C:\MyFolder
D:\MyFolder
E:\MyFolder
F:\MyFolder
G:\MyFolder
H:\MyFolder
J:\MyFolder
Z:\MyFolder
I have tried the following with no success:
*\MyFolder
*:\MyFolder
How to I tell Endpoint Protection to exclude "MyFolder" across the board on every drive letter? Can it be done with wildcards?

Sorry, but it can't be done. Real-time protection doesn't honor wildcards used for drives or folders (though it will honor a wildcard for a file name if it is part of a full path. C:\Example\*.log for example) The documentation is sparse for SCEP, but it's
mentioned in this old blog post for FCS and still applies:
http://blogs.technet.com/b/clientsecurity/archive/2012/12/03/3317660.aspx
The reason is that it's inherently less secure to be able to add such broad exclusions, so they don't make it easy. The best you can do is one exclusion per drive letter as you have above.
Well thats at least an answer! Heh, I can live with that. So I just need to try and collect a list of drive letters where those folders are present and add them one at a time then? To excluse everythign underneaht that folder can I just add the folder path
like so:
C:\MyFolder
Or do I need to do somethign like this instead:
C:\MyFolder\*.*
What's the "right" way to do this?

Steps to install Forefront Endpoint Protection 2010?

I've been searching on how to install Forefront Endpoint Protection 2010 on a Windows Server 2012 R2 Server. I can't seem to find anything about this. Can someone tell me the steps I need to take. I installed SQL 2012, then SCCM
2012, but when I launch the Forefront 2010 installer its saying it can't find SCCM 2007. I take it its not supported in Forefront 2010? Anyways, if there are instructions on how to install the Endpoint Protection and Exchange Online protection I'd appreciate
it.
Fernando

Hi,
In SCCM 2012 Endpoint Protection 2012 is integrated so you cannot install FEP 2010 in it. Add the Site System role called "Endpoint Protection" on your Primary site server, CAS if you use a CAS and then you are good to go.
the steps are described here:
http://blogs.technet.com/b/anilm/archive/2012/02/19/how-to-enable-configuration-manager-2012-endpoint-protection.aspx
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Wsdl endpoint problem

Hi everyone, i need some help, I have a wsdl that points to an external server, if I test the wsdl in WSNavigator I need to chance the end point to "Defined by the user" and set the ip of the external server because by default is "localhost" there, my problem is that when my app execute the model, it tries to reach localhost not the ip given when the wsdl was imported. My question is how i need to import the wsdl to my app to be available to change the endpoint.
Thanks !

Hi
This is how you change the endpoint dynamically in code.
wdContext.<modelNode>().bind(<modelobject>);
            <model object>.wdSetInvocationModifier(new IWDWSInvocationModifier() {
                   public void doModifyInvocation(final Object port) {
                       if ( port instanceof Stub ) {
                         final Stub stub = (Stub)port;
                         stub._setProperty(Stub.ENDPOINT_ADDRESS_PROPERTY,<endpoint>);
                       } else if (port instanceof DInterfaceInvoker) {
                         final DInterfaceInvoker invoker = (DInterfaceInvoker)port;
                         invoker.setProperty(Stub.ENDPOINT_ADDRESS_PROPERTY, <endpoint>);
                       } else{
                          throw new RuntimeException(<Error Message>);
                     public void doModifyAfterInvocation() {}
            <modelobject>.execute();
Hope this solves your problem.
cheers
Deepu

Publishing the endpoint to SR from ESR

Hi,
I have created a Service Interface in ESR of CE server and have published the wsdl to SR but i am unable to find the Endpoints .
Can any one please tell me how to create the endpoints for the published service or how to publish the endpoints of a service from ESR to SR of CE server.
Thanks & Regards,
Hamsa Shree

In ECC, launch transaction SPROXY.
In the list that shows up, navigate to your SCV, and then the namespace that was used. Open that up to see your service interfaces. When you find your service interface, double click on it to see it on the right hand side.
If it has a green icon the proxy is already set and you can then move forward in creating the endpoint. If its red and grey/white, then you need to create the proxy for it.
right click on the service interface, and then pick the create proxy choice. Follow the wizard that shows up.
After this completes you will have a proxy but you still need to implement it (add abap code). You should see on the right hand screen the provider class listed. Its on the properties tab inside of the Interface section. Double click on the provider class name. That should launch you into the class builder screen and you should see your service operations listed under the method. Dbl click the one you want to implement and add your code like you normally would.
At this point, you have a proxy with code behind it so its time to tell the world how to access it. You need to create a binding (endpoint). To do this, you can launch SOAMANAGER from ECC. This will launch a web page.
From that page, click on the Business Admin Tab, and then the Webservice Admin Administration link. In the search pattern you can put in the name of your service interface (found in sproxy) and set it to external name. Click search. If you dont find it try wildcards.
From the list that pops up, select your service interface and click apply selection. Go to the configurations tab, and then click on create service. Give the svc a name, description, and name the binding. When you return to the screen dont forget to scroll down to put in the security information for the binding. Save and you are all set with that.
The last step is to publish the service and binding to your service registry. To do that, SOAMANAGER (from ECC), go to Technical Config, and choose Publication Administration. Find your service, leave the default radio buttons, and select the the 'force publications' option. Make sure your SR is listed in the drop down and then click execute. If all goes well the following screen will tell you so.
You can then go to the SR and test out your service. If that works, its ready for the consumers.

How to go to EndPoint

Similar Messages

Maybe you are looking for