How to handle data that got from SAP by Webservice?

Hi, Gurus.
I am working on IFbA with ABAP and Adobe LiveCycle Designer.
I've developed a function module in R/3 system and created webservice, connected the WSDL address to the form. The problem is how can i handle data that got from SAP by Webservice?
It's Ok if i bind the dataconnection node to the form element, but how can i handle data without binding to the form element? I mean that how can i use the data retrieved from Webserivce in the Javascript, please give me some sample code or script method.
Thanks.

Hi Yang,
If you are using Web Service, then the binding will be done automatically.
It can't grow automatically, what else should i do to achieve this?
1.Select the table(make sure you are not selecting subform) in Hierarchy view
2. Under table select the Row which is having the required fileds for data
3. In the Binding of that row, check the checkbox "Repeat Row for each item data" and under that check the Min Count which will set the default row **** to 1
Regards,
Sachin

Similar Messages

How can i autoforward that mail from SAP INBOX to the outlook

Hi ,
My Requirement is that,
I have to send an email to outlook, whenever PO Created in SRM System
I have created custom workflow, i have added a sendmailtask step, i given the SAP userid to send SAP Mail to the user.
It is sending SAP Mail to the User to his inbox perfectly.
Now, how can i autoforward that mail from SAP INBOX to the outlook. This is has to work for all users.
Please give some suggestions. ot it can be achived any other way.
Note: This is Email Message not a workitem.
I have doubt that RSWW program will work only for workitems.*
Thanks & Regards,
Suresh.

Hi ST,
what I understand from your requirement is that you are able to send messages using SendMail Step to SAP Inbox and now you want it to be sent to users Outlook.
Here you need to create a container which would store users email address of Outlook (which would be stored in SU01 or in a ztable), use this container in your Send Mail step and in the Recepient Type as email.
Hope it helps.
Aditya

How to handle a return statement from a login webservice call

Hi all,
I am new to this iPhone apps. I am trying to wirte a webservice call in which I am comparing my username and password details in webservice and getting an boolean statement as a response. By using that response i should display valid or invalid statement on the screen.
Now i am able to get the response from the webservice, but i am unable to handle that boolean variable present in the xml statement.
Can any one please suggest me how to handle that boolean value from the xml statement?
Thanks
SRI.

Since you are a registered developer you would be far better off posting this in the developers site, this forum is for users of apps.

How to grab data with VBA from SAP Structure or Transaction

Hi,
my goal is to grab the data from the transaction cm01 and cm38 for reporting purposes with VBA in Microsoft Access automatically.
I'm yet able to download several tables with the RFC_READ_TABLE module, but since SAP only tells me that there is the structure RC65D behind the fields in cm01, I'm not able to use the RFC_READ_TABLE module for grabbing the data from cm01.
Does anyone know a way to grab the data from a structure like RC65D or from a transaction like cm01 with VBA?
Thanks in advance!
NicoDr
Edited by: NicoDr on Feb 17, 2012 5:14 PM

Hi Yang,
If you are using Web Service, then the binding will be done automatically.
It can't grow automatically, what else should i do to achieve this?
1.Select the table(make sure you are not selecting subform) in Hierarchy view
2. Under table select the Row which is having the required fileds for data
3. In the Binding of that row, check the checkbox "Repeat Row for each item data" and under that check the Min Count which will set the default row **** to 1
Regards,
Sachin

How to Extract data and reports from the SAP BW warehouse

Hi to All Guru's
I am new to SAP BW. Can any one help me to know, How to Extract data and reports from SAP BW. Do we use any tools. After Extracting the data from SAP BW how can we move all the data to Cognos. It would be kind enough to provide me with any documentation or links. Step by step procedure would be very much helpfull to me.
Thanks
Venu

Hi Voodi
Thanks for the quick response. I think Open hub is to extract the data from SAP BW, but what about sending this data into Cognos. Can you please let me know in detail regarding answer. If possible send me any documentation or links regarding this. Thanks for your concern.
Venu

How to download data in excel from web report in sap ?

how to download data in excel from web report made in sap abap?
through tcode smw0.

for exemple using
MS_EXCEL_OLE_STANDARD_DAT

How to delete master data of materials from sap tables

how to delete master data of materials from sap tables...its needed now.
i know its not recommended but still we need to do this. give me the best possible approach.
regards,
suneetha

Hi,
I would suggest you not to write your own code to delete the entries.
BAPI_MATERIAL_DELETE, this would mark all materials selected for deletion. But still the material would exist in SAP.
Another solution: Delete a material manually and in another session execute the transaction SM04. This would display the tables which get locked when you do the operation, Then you can write your own code to delete the material numbers from all the related tables.
Regards
Subramanian

Model of how APEX handles data (values)?

Reference {thread:id=2486655}
I'm trying to get a model of how APEX handles data (values). There are several places(?) that data (values) can exist. Or so it seems. I'm trying to understand how these work -- to put all the pieces together.
Question:
A) Where data can be?
1) In the database
2) In the session
3) Rendered -- and hence displayed on the screen, if a displayed value -- but not in the session
4) In perhaps(?) some working memory pool(?) but different from the page rendered values I see on the screen?
5) Other?
Why do I think this is relevant?
Question:
B) If there are rendered values and session values different from the rendered values, then when code executes, which of these values (rendered or session) is it executing against?
And maybe the answer is, "You don't understand what's going on." Yes, "Exactly!" Hence the question.
Best wishes,
Howard

Howard (DBA in Training) wrote:
I'm putting this together now. For example:
I set the value of a Page Item (say, :P2_DATA) to "BEFORE" in a Before Region process and change it to "AFTER" in an After Region Process. 'BEFORE' was displayed on the screen but 'AFTER' was in the session state. So I see that PL/SQL changes these values in the session state. But it doesn't "go back" to change the HTML after the region has been rendered -- hence we see BEFORE shown on the screen. (I'll have to think about what a Dynamic Action does.)
Also, if a page item has a default value, say 'DEFAULT' then that value doesn't get into the session state. At least, not with my current settings. Oh, that explains a lot of confusion!! I suppose there's a logical reason for this but who would expect default values to be differently from other PL/SQL operations on the item?
Questions:
1) So why does a default value not get put into the session state?Several reasons, among them:
*1. When/why is the value required?* Region items (and thus their source and default values) are rendered in region/item sequence order. The item's source/default value would therefore not be available in session state until it's rendering point. This is frequently later in page show processing than the value is actually required, such as the common use case of including a data value in the page or region title. Setting the value in a Before Header/Regions computation or process makes it available as required before the item is actually rendered.
*2. The rendered page might not be submitted.* Default values are typically set when a page will create a new row. Consider the situation where the user clicks a "Create" button and is presented with an order entry form containing several default values. They then decide they don't want to create a new order after all, and navigate away from the form page via some mechanism that uses a redirect rather than a submit (such as a default "Cancel" button). This means that no page submit processing is performed, and generally that no session state management is performed. If the default values were set in session state, the order entry page would contain the default values for the non-existent order despite the user never submitting it. This may have unwanted side-effects if these values are referenced elsewhere in the application, and therefore would require extra session state management to be built into the application.
*3. A rendered item might not be submitted with the page.* Per the HTML specification, the values of disabled controls unchecked checkboxes are not POSTed on page submit. Consider a situation where a checkbox item is set with several default values, but the application requires that the checkboxes be cleared and disabled by a dynamic action if the user chooses certain options from a select list. In this case, on page submission no values are submitted into session state for the checkbox item. If the defaults had been set in session state, then the application would be in an inconsistent state, with the user-selected option indicating that none of the checkboxes were checked, but with session state holding values showing that they were. This would require additional processing to ensure that the application's state was consistent before saving it to the database.<sup>1</sup>
2 & 3 are particularly significant in basic wizard-generated applications. Doing things in this way, the wizard-generated DML and navigation "just works", without the need for additional session state management.
2) Is there a Page Item setting that causes the default value to be saved to the session state?No. Hopefully the explanations above provide sufficient reason to show why this is genearlly not desirable. On the rare occasions when it is required, set the session state value using a computation or process.
<sup>1</sup> There are other reasons—mainly security related—that make it good practice to perform such checks in more complex and internet-facing applications anyway.

How to handle common system crashes in SAP Business One until you upgrade to SAP Business One 9.1?

SAP Business One 9.1 is about to release in this year with many feature enhancements in various areas, such as in Business Logic and Localization, Reporting and Analytics, Lifecycle Management and Support, SDK Features for extensibility, Infrastructure and Architecture, etc. , with this upgrade every organization using SAP Business One is also expecting that some previous System Crash problems associated with SAP Business One 8.8 or 9.0, will also be resolved with the advent of 9.1.
But until 9.1 is available in GA, we have to know and follow some procedures to avoid this situation. Through this blog we have addressed ‘How to handle common system crashes in SAP Business One until you upgrade to SAP Business One 9.1’. In below link you can have a look that what common system crash issues been reported and what solution given by the community members:
common system crashes in SAP Business One

Hi,
Thanks for sharing valuable information with us. You may repost this discussion as "Document" or Blog type.
Thanks & Regards,
Nagarajan

How to view data in Xcelsius from an external Excel file

Hi Everyone,
i wonder if you know How to view data in Xcelsius from external Excel file and not depend only on the emebded excel sheet.

Hi,
As per my understanding, excel has to be imported in Xcelsius to draw up the dashboard. Your aggregated data sits in the xlf file. Using an external excel file will not be possible (I guess).
One of the ways to connect to an external excel, is the use XML Maps but then your data has to be in the form of XML which will be pulled into excel first and then needs to be brought in Xcelsius using Data Manager.
You can explore XML Maps in xcelsius in SDN.
Regards
Nikhil

I added a photo from camera roll to a created album,how can I delete that photo from camera roll and still keep photo in album

I added a photo from camera roll to a created album, how can I delete that photo from camera roll and still keep same photo in album?

You can't. It doesn't work that way.
the new album that you created doesn't contain a copy of the actual photo. It contains a pointer to that photo. If you delete it from the camera roll, you will delete it from the album that you created as well. Albums that you create on the iPad in the Photos app are for local organization only and cannot be transfer or imported to your computer, because there really are no photos in those albums

How to delete G/L account from Sap?

Hello gurus,
Can any one please suggest me the procedure how to delete the gl account from SAP?
Regards
K.srinivasrao

Dear K.srinivasrao
If there are any Transactions posted in GL Account you cannot delete the GL Account unless the balnce of the GL Account
Go to OBR2 and delete the GL Account
In FS00 U can Mark the GL Account for deletion
hope this will help
Regards
CA.Prasad

How-to extract data in chunks from one R3 to another R3 system

Does anybody know how to extract data in chunks from one system to another? Imagine you would like to extract 1M records in chunks of 10K records, how would you do it between 2 different R3 systems? A cursor (even with hold) doesn't work
Any suggestion appreciated
Thanks
Ioan

Hi Ioan,
I'd do it with fm : TABLE_ENTRIES_GET_VIA_RFC (with where clause-tab)
or fm GET_TABLE_RFC (get all items)
regards Andreas

How can distribute 5 lakhs records from sap R/3 setup tables ?

How can distribute 5 lakhs records from sap R/3 setup tables in to multiple requests in sap BI?

Hello,
what is "lakhs" ?
Please use plain English words on a world wide forum...
Regards,
Olivier

How will we send smtp mail from SAP via Exchange

Hi;
We changed SAP OS between Windows and Linux and still 4.6c . Now we use linux OS.
We used smtp mail at SAP via Exchange with 3.party (sendmail,indigomail etc.) But Now I dont know how will we send smtp mail from SAP.
Please help me,
Thanks for answers.
Moderator message: not directly related to ABAP development, please have look in the Netweaver forums, also search for available information on sending emails.
Edited by: Thomas Zloch on Nov 22, 2010 2:39 PM

Hi,
What is the nature of the URL you wish to include in the e-mail ?
Is it fixed or dynamic ?
Cheers
Colin.

How to handle data that got from SAP by Webservice?

Similar Messages

Maybe you are looking for