How to handle vendor down payments on invoice payment?

Hi,
The Vendor down payments are required to be manually cleared before payment against the Invoice to the Vendor. There is great amont of risk involved if manual clearing of down payments is not done. The invoices are likely to be paid fully in spite of down payment? Has anybody done any kind of development in this area? Can you share your experiences in this regard?
Thanks and regards,
Sanjay

Hi,
If you are making payments to vendor using F110, undjusted downpayments are included at the time of payment. If you are doing payments through F-53 or F-58, the user can give Special GL indicator to display and slect unadjusted downpayments.
Thanks and Rgards,
Anit

Similar Messages

How to handle vendor discounts based on the qty / value procured.

Hello
       How to handle vendor discounts based on the qty / value procured.
a.       Scenario: you have entered into a contract with vendor that you will buy goods worth Rs 10000/- and if you buy goods worth more than 100000 the vendor says he will give a discount of Rs 5000/- @ the end of the year.
i)                    How to handle this sceneriou2019s with SAu2019s
ii)                   What does STD SAP offer.
Regards
Sapman man

Hi,
For the discucount condition type, you have to maintain scales.
Take Condition type - Discount Value ( RB00)
Discount Value ( RB00) - Means Fixed discount. For this condition type, you have to maintain Scale basis as Value scale 'B' in the condition type customization.
Transcation : M/06
Select your condition type RB00 and click on the details icon.
In the Scales block, you have to maintain and save.Calculation type = Fixed amount
Scale basis = Value scale 'B'
For this condition type, you have to maintain scales in the inforecord.
Transcation : ME12
Select this condition type, click on the Scales icon. There you have to maintain like
From : 10,0000            Rate: 5000.
It means, if the document value is reached 10,0000 then discount is 5000rs. If the value islessthen the 10,0000 then no discount.
Regards
KRK

How to handle Drop Down Box on Interactive Adobe Form

Hi,
On my adobe form there are some drop down boxes like company code, cost centre etc, actually i need F4 help on those fields, but what i found is it's not possible to have F4 help on adobe form so i have choosen alternative as webdynpro acitvex drop down box in library. I have written a web dynpro application to fetch the data and display it on adobe interactive form, i could able to display the data for all the fields on adobe form except these drop down boxes, can any body suggest me how to handle these drop down boxes in webdynpro application. Your help will be greatly appreciated.
Thansk & Regards,
Venkat

Hi Venkat,
As you are using the WDP ActiveX dropdown in your form, it is fine but to populate values in the DD, you need to bind the context attribute with a simpletype and then populate the values. Use the below code to obtain a ModifiableSimple Type:
IWDAttributeInfo abcInfo = wdContext.nodeABC().getNodeInfo().getAttribute("AttributeName");
ISimpleTypeModifiable def = abcInfo.getModifiableSimpleType();
IModifiableSimpleValueSet abcValueSet = def.getSVServices().getModifiableSimpleValueSet();
and after this put te values in the obtained modifieable simple type like below:
abcValueSet.put(key,value);
where key may be the ID and value may be the name to be displayed in DD.
Reward points if found helpful.
Regards,
Arafat

How to use F-04 for customer invoice payment

Hi All,
we post cutomer invoice in FB70 & then use F-28 for customer payment. Could you please advice if I can use F-04 instead of F-28 for customer payment.
Regards
Deepak

Dear Deepak,
there is no difference between the two transaction F-04 and F-28, if You use the F-04 with Incoming payment flag switched on.
The F-04 like FB05 are the generic classic trancations that can be used for incoming, outgoing, credit memo and clearing at once: changing the flag You can do different posting without running different transction as F-53, F-28 and so on.
Thanks.
Mauri

A/R Invoice + Payment using DI API

How can we create an A/R Invoice + Payment using DI API ?

Hello,
You (should) create a A/R invoice first, then you can create a payment based on the invoice.
or If you create the payment first later the invoice you should reconsile the 2 transactions.
Regards,
János.

How to clear the down payment against the vendor invoice in the payment program?

A down payment is made $25 Later an invoice is posted for $100 Now i want to Pay $75 to Vendor But the Automatic payment program is not clearing the down payment against the vendor invoice. Could you please help how to clear the down payment against the vendor invoice in the payment program?

Swathi,
Need your help i have a strange situation
1) F-48 and document posted with document no = 15..... in company code = L002 with payment block getting populated automatically
2) F-48 and document posted with document no= 15..... in company code = Us11 without payment block and the screen does not even show payment block, I had to check this from BSEG table
My question is
a) How and where does this payment block is triggered through configured and how to process next steps.
b) when I use F-48, how do we do the actual payment, is there a check printing and linking it to the KZ document or is check printing done outside the system and the KZ document type does not have any linkage.
c) If I do FB60 for a higher amount how do we pay partial amount.
Your response is appreciated.

Vendor Down Payment Invoice

Hi All,
A company receives an invoice that includes VAT for down payment made.
This invoice is then cleared with partial or final invoice.
Could anyone adevice me about this business case?
Thanks

Hi Deepak,
my issue is like this:
- I receive the Vendor down payment invoice: u20AC 12000,00 with VAT. I post it by F-48 in the follow way:
Posting Key 34; Vendor Code; u20AC 12000,00
Posting Key 29; Vendor Code; special G/L Indicator (A); u20AC 10000,00
Posting Key 40; VAT G.L.; u20AC 2000,00
- I receive the Vendor FINAL invoice that I should post by MIRO and which the VAT isn't posted.
I wonder how to obtain by miro the follow posting:
Posting Key 39; Vendor Code; Special G/L Indicator (A); u20AC 10000,00
Posting Key 40; G.L.account; u20AC 2000,00; u20AC 10000,00
Thanks

How to clear vendor open items if vendor invoice currency and payment currency different

Hi All.
How to clear vendor open items through f-44 if vendor invoice currency is EUR , payment currency is USD but local currency is INR
while clearing through f-44 system showing error as "to large for clearing clearing is not possible"
I checked all configuration, configuration wise no problem
BR.
Chandra

Hi Chandra,
You chose any one of the currency i.e. EUR/INR/USD for clearing in F-44. After selecting line items for clearing, system will show a difference. Click on over view button and manually write off the difference by selecting any one account i.e. dummy or small diff.account, after that click on process open items then system will show the difference 0 and simulate the document, here system will post gain/loss exchange GL postings along with other line items. After save the document, manually pass journal entry to dummy account and gain/loss account. I have explained clearly in the below example.
Invoice is in USD - 1000 & INR - 60000
Payment is in INR - 60000
Now I am going to clear these in INR currency in F-44 on 31.03.2015. On this date the exchange rate for USD is 60.10. At the time of clearing system will post the below entry
Vendor A/c Dr 60000 (invoice)
Vendor A/c Cr 60000 (Payment)
Gain from exchange rate A/c Cr 100 (60000 - 60100)
Small diff.write off A/c (or) Dummy A/c Dr 100
After done the above posting, we have to pass below manual JV in FB01
Gain from exchange rate A/c Dr 100
Small diff.write off A/c (or) Dummy A/c Cr 100
Regards,
Mukthar

Vendor Down Payment Clearing F-54

Hi,
I am clearing Vendor Down Payment using BDC for T-code F-54. I have Invoice no and Down Payment Document No, which needs to be clear against that Invoice.
But, how to determine the position of that DP Document number in the next screen when i am using BDC? T-Code F-54 selects Down Payment Docs from table BSIK. So, in which sequence DP Document will be displayed in table control in the next screen? (e.g. {based on document no, Posting date} =>(ASC/DSC)).
e.g: Invoice no: 7100000001 DP document: 5240000004
after entering Header data on F-54 you will get below data,
DP Document:
1.       5240000001
2.       5240000004
3.       6600000003
4.       6600000004
So, how to determine my DP Document is @Position no: 2.??
Thanks in advance.

Nilesh,
BDC is unable to select document in sort postition. This is a manual input and SHDB recording can't choose DP documents like that.
I would recommend you clear downpayment by F-51 or change document FB03 for invoice reference field. It's same effect of F-54 however depends field status of of your installation screen.
Best Regards

Vendor down payment clearing without VAT posting.

Hello SAP Gurus,
I have following issue:
Currently our Vendor down payments produce VAT postings when clearing with final invoice, which is correct.
But we have some old vendor down payments which does not include VAT and needs to be cleared without any impact to VAT postings.
User is using F-44 transaction and can not define any tax code for postings, system calculates it automatically.
It is not possible to make VAT posting happen and then make reversal postings fot VAT accounts as well.I tried to check flag 'Posting without tax allowed' and uncheck 'Post automatically only' in account master data. And then make manual posting using that account via FB01 but system still requires tax code to be entered because Tax category in account master data is set to '<' I'nput Tax Account'. It is impossible to change Tax category let's say to ' * ' because account have balances on it.
Could anyone advice how can I clear these downpayments without VAT posting?
Thank you,

I have tried to enter 0% input tax code, but still I'm not able to post document because of error msg:
Tax entry not possible in this item
Message no. FF724
Diagnosis
You can not enter a tax amount in this item since, due to the posting amount entered and the tax code, a total tax amount of zero has been calculated.
This could either be due to the fact that the tax code has been defined with a value of 0%, or because the posting amount entered (that is, the tax base) is too small.
Example:
With a tax rate of 15%, a tax amount greater than zero will only be achieved with a base amount greater than 0.04. With values of 0.03 and less, it is therefore not possible to enter a tax amount.
Procedure
Only enter tax amounts in conjunction with tax codes for which a percentage rate not equal to zero has been defined. Make sure that in documents with several G/L account items you enter the total tax amount in an item with a sufficiently high posting amount.

Very urgent, vendor down payment clearing - ka doc type

hello gurus,
while clearing vendor down payment, some down payment entries are posted as ka doc type. now i have to clear the invoice down payment with the ka doc type. how to do this.
for retention account we booked in special G now that retention money also paid but that doc is not showing as cleared. still it showing in red colour. but balance is nill. what to do for this..
can anybody help me very urgent friends
thanks
jaya

HI ,
CHECK THI SPROCEDURE ,
DOWN PAYMENT;
Vendor A/C--a DR1
TO Bank
Invoice;
Expence a/c dr
to Vendor----
2
down payment clear:
Vendor A/C-----Adr -
3
to Vendor a/c----4.
Hi once you do the Down payment clearing only 1 & 3 line items will be cleared.
but 2&4 line items will show as open items .
This line items you have to clear .Clear this in F-44.
CHANDRA

Calculate tax in Vendor Down Payment

Hi,
While posting down payment to my service vendor including service tax amount in F-48 after tick the calculate tax also, it is not asking for tax code and it is not showing service tax seperately. Only vendor a/c and bank a/c's are simulating. Please tell me how to calculate tax while doing vendor down payment.
Regards,
Prasad

> Hi,
>
> Thanx for ur reply, every month we are paying through
> advance payment for internet connection including
> service tax and this is fixed amount.
1. Enter vendor down payment - gross amount (do not calculate tax)
2. Post a recurring document to your vendor account which will include the lines:
C Vendor
D Internet charge expense account
D tax
3. Allocate invoice with down payment

Withholding Tax Error during Vendor Down Payment

Hi,
We have created some new Withholding Tax Types and codes and have assigned them to a Vendor. Now when we try to make a down payment on this Vendor, at the time of posting the system gives the error:
"WCT Code not allowed in Down Payment. Remove the WCT Code."
We are using the newly created Withholding Tax code, so how and why is the system taking it as WCT?
Please help.
Thanks!
Regards,
Angad Nagpal

Hi
First create withholding tax types for Payment Posting and withholding tax codes and while assigning withholding tax types and codes in Vendor Master Data , only assign withholding tax types and select Liable checkbox and do not assign withholding tax codes.
while doing Down payments or Invoices system will prompt a pop-up box and you can select the relevant tax codes.
Then you can check whether it is calculating the taxes or not.
Regards
Venkat

Vendor Down Payment Clearing: F-54 or F-44

Hi
I have made a down payment (with Spl. GL indicator) to a vendor, using F-48. Then I book an invoice using FB60. I kept the two amounts same and ignored WT to keep things simple.
Now i want to clear the down payment against the invoice. I use F-54. The clearing transaction is getting posted. However, the Invoice is lying open (credit entry) along with the Clearing document (debit entry). On the other hand the down payment document (debit) is getting cleared with the Clearing document (credit entry). This means I have two open line items and two cleared line items. I can clear the two open items again using F-44.
I have two questions:
1. What is the use of F-54 here since I have to use F-44 eventually?
2. While doing F-54, Posting Key for the debit line item is 26 : Payment Difference. This is could not understand.
Can anyone please help me out on this?
Thanks in advance
Aninda

Dear Aninda ,
I will explain you with following example.
Recon account(Vendor)---3000000
Advance to Vendor----
4005000
Exp a/c----
7575100
Bank a/c----
5000100
1. Advance to Vendor (spl gl -A)(F-48)
Vendor a/c    (SPL-A)( GL- 4005000)        DR   1000
                  T0 Bank a/c (GL-5000100)                  1000
2. Invoice posting
Expenditure a/c ( GL-7575100) Dr      1000
     To Vendor Account(GL-3000000)     1000
3. Clear Vendor Down Payment (F-54)
Vendor a/c (GL-3000000) DR                1000 (Posting key-26)
     To Vendor a/c (SPL-A)( GL- 4005000)          1000
It means Credited spl GL-A has converted from advance to Normal open item. Amount has been transferred from Advance to Vendor GL to Normal Recon account.By this way Advance account shows Nil Balance with debit(F-48) and Credit (F-54)
The remaining 2 line items i.e., Credit (F-43) and Debit (F-54) shows as open items. In the next step we need to knock off those line items by manual clearing or automatic clearing.
4. Normal Clearing (F-44)
It will be posted without line items.
I hope i am able to help you out to understand process

How to get vendor payment terms

Hi all,
I am creating a report. I need to get vendor payment terms. There are invoices without PO, how can I retrieve the payment terms for those cases.
Thanks.

Hi nene
in case of invoice without PO, The payment term will be selected from the vendor master data (in View : payment terms transaction in XK03).
Check payment term in master data is exist or not.
the data is in the table LFB1 : Field ZTERM
Regards
Wiboon

How to handle vendor down payments on invoice payment?

Similar Messages

Maybe you are looking for