How to i display data of piechart with legend names?

hi, i have a pie chart where i'm showing data inside it..now,my requirement is data should be shown with legendnames like
Catgeory1 (23)
Category2 (76)
where can i do this..thanks in advance..'
lucky

Hi lucky,
If I understand correctly, you want to display legend name and filed value as data label in the pie chart. Suppose the Values field is Amount, Category Groups field is Year. Please refer to the following steps:
Right click the data label in the pie chart, select Series Label Properties.
Click the expression icon below “Label data:” prompt, and fill with expression below:
=Fields! Year.Value &"(" & Fields! Amount.Value & ")"
There is a screenshot for your reference:
If you have any questions, please feel free to let me know.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

Similar Messages

How can I display the vendor associated with result of my running total sum

I have a report that lists vendors with their most vecent order dates. I need to set up a rotation so that the vendor with the latest order date is next to be selected. I used the running total summary to pick the latest date. How can I display the vendor associated with result of my running total summary?

If your "latest" order date means the "oldest" order date, why don't you try this:
Go to Report tab -> Record Sort Expert -> Choose your order date in ascending order
This will make your oldest order your first record shown.
You can then create a running total count for each record.
Lastly, in your section expert under conditional suppress X+2 formula, write this:
{#CountRecords}>1
The result will only show the oldest record in your report.
I hope that helps,
Zack H.

How can I load data into table with SQL*LOADER

how can I load data into table with SQL*LOADER
when column data length more than 255 bytes?
when column exceed 255 ,data can not be insert into table by SQL*LOADER
CREATE TABLE A (
A VARCHAR2 ( 10 ) ,
B VARCHAR2 ( 10 ) ,
C VARCHAR2 ( 10 ) ,
E VARCHAR2 ( 2000 ) );
control file:
load data
append into table A
fields terminated by X'09'
(A , B , C , E )
SQL*LOADER command:
sqlldr test/test control=A_ctl.txt data=A.xls log=b.log
datafile:
column E is more than 255bytes
1     1     1     1234567------(more than 255bytes)
1     1     1     1234567------(more than 255bytes)
1     1     1     1234567------(more than 255bytes)
1     1     1     1234567------(more than 255bytes)
1     1     1     1234567------(more than 255bytes)
1     1     1     1234567------(more than 255bytes)
1     1     1     1234567------(more than 255bytes)
1     1     1     1234567------(more than 255bytes)

Check this out.
http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96652/ch06.htm#1006961

How do I display data from Multiple Queries in a spreadsheet?

I am running Oracle forms 10g as a kicker to export a report (rdf 10.1.2.0.2) to PDF or Excel Spreadsheet - User's choice.
Doesn't matter if I have desformat = SPREADSHEET, DELIMITEDDATA, or DELIMITED; I still get only the first query displayed when I run in spreadsheet format.
How do I display data from Multiple Queries in a spreadsheet? Is this possible?
Thanks in advance!

Hi adam,
did you search the forum? You will find a lot of threads handling the problem of Excel file access.
In short: you need to use ActiveX (the RGT also uses ActiveX under the hood)!
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

HT5219 How many Thunderbolt displays can I use with my MacBook Pro using Windows 7 and Parrallels?

How many Thunderbolt displays can I use with my MacBook Pro using Windows 7 and Parallels

Two. You can daisy-chain two ATD together. Doesn't matter what you're running.
Clinton

How to display data in table with dynamic rows, section wise in a page.

Hello all,
I work on report creation in BI Publisher where I need to display data from xml in a table in pdf format.The output page is divided into two vertical sections , containing tables, with exactly same columns on left and right sections. The number of rows in table depends on the output of the fetching query. The page is to be populated in such a way that, at first, the left table is populated, then the next rows fill up the table on the right section of the page, if more rows are left, they fill up the tables on next page[first the left table, and then the right one, in a similar fashion as in page 1]
On a bird's eye view, the data needs to be simply mapped to a table, with dynamic number of rows, and so can span number of pages depending on size of data. On a implementation level, I am stuck in getting the left section of the page populated first, then the right section[in place of the right page], and then the next page.
Please guide me if someone has any idea in getting this achieved.
Thanks in advance.

Thanks for the response...
I am able to get the desired functionality. I just need the tables to be inside a bigger table, that also has a dividing line between the two columns. This is was is intended in the req. provided to me. The column formatting option provides me a line ,but that is not further modifiable .Please help me in getting a perpendicular line between the two columns, which I need to be of a specified width and color.

How can I display date+time and not the point number in excell?

Hi everyone,
Could anybody tell me how I can save date + time to a file, so that I can display on a diagram(excel) : date+time in (ox) and data (oy)? :
My program sets in (ox) the point number and not the date+time....( although date and time are written correctly in the column...)
Any help would be great,
Thanks,
regards,
Marc

hi there,
excel uses 01.01.1900 00:00 as the time offset, LabVIEW uses 01.01.1904 02:00, so you can't display the correct datetime in excel when you write the time as a fractional number of seconds from LabVIEW. you must format the datetime in LabVIEW to a string and write that to the column. use the "Format Date/Time String" - function and for example "%d.%m.%Y %H:%M:%S%3u" as the format string (see the functions help for more examples). you also could format your data to a string using "Format Into String" - function and write the file as a 2D string array. the decimal point you have to use depends on your system and its settings, but you can specify the decimal point in the Format string like "%.;%f" (means fractional number with point as decimal point).
best regards
chris
Best regards
chris
CL(A)Dly bending G-Force with LabVIEW
famous last words: "oh my god, it is full of stars!"

How to avoid displaying date,time using Enhancement point.

Hi friends,
i have to work on the standard report.
stadard report displays date,time ,reportname on the top of the page. my requirement is not to display date ,time,reportname.
they have used the following code,
WRITE text-001 TO m_line+d_offset(4). " Time
WRITE sy-timlo USING EDIT MASK '__:__:__' TO m_line+d_offset(08).
WRITE text-002 TO m_line+d_offset(05). " Date
WRITE sy-datlo DD/MM/YYYY TO m_line+d_offset(10).
BY using Enhancement point how to achieve my task.
kindly help me

Post Author: jsanzone
CA Forum: WebIntelligence Reporting
basham,
You didn't mention which type of DBMS you are using (i.e. Oracle, MS SQL, MySQL, etc), but in a nutshell using MS SQL here is the principle. Your time that is recorded in the records is dependent upon a setting in your RDBMS. For instance, the RDBMS can use the machine time (which would most likely be local time), or it can use the machine time with an offset (to accomodate GMT, for instance). GMT is factored differently based upon your time zone (and time of year, i.e. DST or EST, etc). I'm on the east coast so right now my offset is GMT - 5, so if my time right now is 1457, then GMT is 1957. To get SQL to compute an offset you must take the number of hours to offset and divide by 24 (24 hours in a day) and add that to the record in the database. For instance, to get GMT right now I would use:
select cast(getdate()5/24. as char(12))rtrim(convert(char(12),getdate()5/24.,8))' GMT'
Hope this helps. If you're on Oracle, then the mathematical principles remain the same, just the formatting will be different.

How to download output data into Excel with all Column Headings

Hi Experts,
Please tell me How to download output data of ALV Grid into Excel file with all Column Headings and I want to do this using coding,
please send me if any solution is available.
Thanks & Regards,
Yogesh

VERSION CONTROL (Most recent on top):                                *
DATE(mm.dd.yyyy)    AUTHOR                                         *
06.25.2007         Pattan Naveen                                   *
Hi yogesh,,
Go through this in this u find ur solution.
report ZTEst_programe no standard page heading
                           line-size 100
                           line-count 50(5)
                           message-id zz.
*--alv type declaration
type-pools: slis.
*--Tables:
tables: anla,
        anlz,
        anlh,
        anlb,
        anlc.
data: v_pos type i.
data: v_ndjar type i.
data: v_ndper type i,
      v_ndperndabp type i,
      v_ndjarndabp1 type i,
      v_ndjarndabp type i,
      value type i,
date(10) type c value '2006.12.04'.
data: c_0000(4) type c value '0000'.
data: begin of it_final occurs 0,
         anlkl(8),
         bukrs(4),
         anln1 like anla-anln1,
         anln2 like anla-anln2,
         txt50 like anla-txt50,
         txa50 like anla-txa50,
         anlhtxt like anlh-anlhtxt,
         sernr like anla-sernr,
         invnr like anla-invnr,
         menge like anla-menge,
         meins like anla-meins,
         inken like anla-inken,
           ivdat like anla-ivdat,
         aktiv like anla-aktiv,
         gsber like anlz-gsber,
         kostl like anlz-kostl,
         kostlv like anlz-kostlv,
         werks like anlz-werks,
         stort like anlz-stort,
          raumn like anlz-raumn,
          txjcd like anlz-txjcd,
         ord41 like anla-ord41,
         ord44 like anla-ord44,
         gdlgrp like anla-gdlgrp,
         anlue like anla-anlue,
         lifnr like anla-lifnr,
         typbz like anla-typbz,
         aibn1 like anla-aibn1,
      aibn2 like anla-aibn2,
        aibdt like anla-aibdt,
         posnr like anla-posnr,
        vmgli like anla-vmgli,
        invzu like anla-invzu,
        ernam like anla-ernam,
        erdat like anla-erdat,
         afabe like anlb-afabe,
        afasl like anlb-afasl,
         ndjar like anlb-ndjar,
         ndper like anlb-ndper,
        afabg like anlb-afabg,
        ndabj like anlc-ndabj,
        ndabp like anlc-ndabp,
        andsj like anlc-andsj,
         andsp like anlc-andsp,
        safbg like anlb-safbg,
         umjar like anlb-umjar,
       inbda like anlb-inbda,
       kansw like anlc-kansw,
       knafa like anlc-knafa,
        kaafa like anlc-kaafa,
                 deakt like anla-deakt,
kanza like anlc-kanza,
kaufw like anlc-kaufw,
kinvz like anlc-kinvz,
ksafa like anlc-ksafa,
kmafa like anlc-kmafa,
end of it_final.
data: begin of it_final_as91 occurs 0,
         anlkl(8),
         bukrs(4),
         anln1 like anla-anln1,
         anln2 like anla-anln2,
         txt50 like anla-txt50,
         txa50 like anla-txa50,
         anlhtxt like anlh-anlhtxt,
         sernr like anla-sernr,
         invnr like anla-invnr,
         menge like anla-menge,
         meins like anla-meins,
         inken like anla-inken,
         ivdat like anla-ivdat,
         aktiv like anla-aktiv,
         gsber like anlz-gsber,
         kostl like anlz-kostl,
         kostlv like anlz-kostlv,
         werks like anlz-werks,
         stort like anlz-stort,
         raumn like anlz-raumn,
         txjcd like anlz-txjcd,
         ord41 like anla-ord41,
         ord44 like anla-ord44,
         gdlgrp like anla-gdlgrp,
         anlue like anla-anlue,
         lifnr(10),
         typbz(15),
         aibn1 like anla-aibn1,
         aibn2 like anla-aibn2,
        aibdt like anla-aibdt,
         posnr like anla-posnr,
        vmgli like anla-vmgli,
        invzu like anla-invzu,
        ernam like anla-ernam,
        erdat like anla-erdat,
end of it_final_as91.
data: it_download_as91 like it_final_as91 occurs 0
                                          with header line."#EC NEEDED
data: begin of it_final_as92 occurs 0,
         anlkl(8),
         bukrs(4),
         anln1 like anla-anln1,
         anln2 like anla-anln2,
         deakt like anla-deakt,
         ernam like anla-ernam,
         erdat like anla-erdat,
         afabe like anlb-afabe,
         afasl like anlb-afasl,
         ndjar like anlb-ndjar,
         ndper like anlb-ndper,
          afabg like date,
         ndabj(3) type c,
         ndabp(3) type c,
        kansw like anlc-kansw,
       knafa like anlc-knafa,
        kaafa like anlc-kaafa,
kanza like anlc-kanza,
kaufw like anlc-kaufw,
kinvz like anlc-kinvz,
ksafa like anlc-ksafa,
kmafa like anlc-kmafa,
end of it_final_as92.
data: it_download_as92 like it_final_as92 occurs 0
                                          with header line."#EC NEEDED
data: begin of it_values occurs 0,
         anlkl(8),
         bukrs(4),
         anln1 like anla-anln1,
         anln2 like anla-anln2,
         deakt like anla-deakt,
         afabe like anlb-afabe,
        afasl like anlb-afasl,
         ndjar like anlb-ndjar,
         ndper like anlb-ndper,
         afabg like date,
         ndabj(3) type c,
         ndabp(3) type c,
         afabe_02 like anlb-afabe,
         afasl_02 like anlb-afasl,
         ndjar_02 like anlb-ndjar,
         ndper_02 like anlb-ndper,
          afabg_02 like date,
         ndabj_02 like anlc-ndabj,
         ndabp_02 like anlc-ndabp,
        kansw01 like anlc-kansw,
       knafa01 like anlc-knafa,
        kaafa01 like anlc-kaafa,
          kansw02 like anlc-kansw,
       knafa02 like anlc-knafa,
        kaafa02 like anlc-kaafa,
          kansw03 like anlc-kansw,
       knafa03 like anlc-knafa,
        kaafa03 like anlc-kaafa,
          kansw04 like anlc-kansw,
       knafa04 like anlc-knafa,
        kaafa04 like anlc-kaafa,
          kansw05 like anlc-kansw,
       knafa05 like anlc-knafa,
        kaafa05 like anlc-kaafa,
       kansw06 like anlc-kansw,
       knafa06 like anlc-knafa,
       kaafa06 like anlc-kaafa,
       kansw07 like anlc-kansw,
       knafa07 like anlc-knafa,
       kaafa07 like anlc-kaafa,
       kansw08 like anlc-kansw,
       knafa08 like anlc-knafa,
       kaafa08 like anlc-kaafa,
       kansw09 like anlc-kansw,
       knafa09 like anlc-knafa,
       kaafa09 like anlc-kaafa,
kanza01 like anlc-kanza,
kaufw01 like anlc-kaufw,
kinvz01 like anlc-kinvz,
ksafa01 like anlc-ksafa,
kmafa01 like anlc-kmafa,
end of it_values.
data: it_values_xls like it_values occurs 0
                                   with header line."#EC NEEDED
data: begin of it_itab1 occurs 0,
       bukrs like anla-bukrs,
       anlkl like anla-anlkl,
       anln1 like anla-anln1,
         anln2 like anla-anln2,
       txt50 like anla-txt50,
       txa50 like anla-txa50,
       invnr like anla-invnr,
       ktogr like anla-ktogr,
       sernr like anla-sernr,
       menge like anla-menge,
       meins like anla-meins,
       ivdat like anla-ivdat,
       inken like anla-inken,
       aktiv like anla-aktiv,
       deakt like anla-deakt,
       zugdt like anla-zugdt,
       zujhr like anla-zujhr,
       zuper like anla-zuper,
       gdlgrp like anla-gdlgrp,
       anlue like anla-anlue,
       xafabch like anla-xafabch,
       aibn1 like anla-aibn1,
       aibn2 like anla-aibn2,
       aibdt like anla-aibdt,
       posnr like anla-posnr,
       ord41 like anla-ord41,
        ord44 like anla-ord44,
        vmgli like anla-vmgli,
         invzu like anla-invzu,
         typbz like anla-typbz,
         lifnr like anla-lifnr,
         ernam like anla-ernam,
         erdat like anla-erdat,
      end of it_itab1.
data: begin of it_itab2 occurs 0,
        bukrs like anlz-bukrs,
        anln1 like anlz-anln1,
         anln2 like anla-anln2,
        bdatu like anlz-bdatu,
        werks like anlz-werks,
        gsber like anlz-gsber,
        kostl like anlz-kostl,
        kostlv like anlz-kostlv,
        stort like anlz-stort,
        raumn like anlz-raumn,
        txjcd like anlz-txjcd,
        ipsnr like anlz-ipsnr,
      end of it_itab2.
data: begin of it_itab3 occurs 0,
        bukrs like anlh-bukrs,
        anln1 like anlh-anln1,
        anlhtxt like anlh-anlhtxt,
       end of it_itab3.
data: begin of it_itab4 occurs 0,
        bukrs like anlb-bukrs,
        anln1 like anlb-anln1,
         anln2 like anla-anln2,
        afabe like anlb-afabe,
        bdatu like anlb-bdatu,
        afasl like anlb-afasl,
        ndjar like anlb-ndjar,
        ndper like anlb-ndper,
        afabg like anlb-afabg,
        ndurj like anlb-ndurj,
        ndurp like anlb-ndurp,
        umjar like anlb-umjar,
        safbg like anlb-safbg,
        zinbg like anlb-zinbg,
        inbda like anlb-inbda,
        end of it_itab4.
data: begin of it_itab5 occurs 0,
       bukrs like anlc-bukrs,
       anln1 like anlc-anln1,
         anln2 like anla-anln2,
       gjahr like anlc-gjahr,
       afabe like anlc-afabe,
       zujhr like anlc-zujhr,
       zucod like anlc-zucod,
       ndabj like anlc-ndabj,
       ndabp like anlc-ndabp,
       kansw like anlc-kansw,
       knafa like anlc-knafa,
       kaafa like anlc-kaafa,
       ksafa like anlc-ksafa,
       andsj like anlc-andsj,
       andsp like anlc-andsp,
kanza like anlc-kanza,
kaufw like anlc-kaufw,
kinvz like anlc-kinvz,
kmafa like anlc-kmafa,
      end of it_itab5.
ALV DECLARATIONS
*--declarations for Xls sheet header field names
data: begin of it_head occurs 0,
column(70).
data: end of it_head.
data: begin of it_head1 occurs 0,
column(70).
data: end of it_head1.
*--type declarations for field catalog for basic report
data: it_fldcat_head type slis_t_fieldcat_alv,
      wa_fldcat_head type slis_fieldcat_alv."#EC NEEDED
data : w_field type slis_fieldcat_alv."#EC NEEDED
data: it_fldcat_head1 type slis_t_fieldcat_alv,
      wa_fldcat_head1 type slis_fieldcat_alv."#EC NEEDED
*--type declarations for layout design
data: wa_layout type slis_layout_alv.
*--type declarations for list header on grid
*data: top_of_page type slis_t_listheader.
*--declaration of variables
data : w_repid like sy-repid.
**selection-screen
select-options: s_bukrs for anla-bukrs,
                s_anln1 for anla-anln1.
select-options: s_deakt for anla-deakt,
                s_gjahr for anlc-gjahr obligatory,
                s_anlkl for anla-anlkl,
                s_date for anla-aktiv.
*selection-screen
selection-screen begin of block blk1 with frame title text-022.
selection-screen begin of line.
parameters : r1 radiobutton group g1 default 'X'.
selection-screen comment 20(50) text-020.
selection-screen end of line.
selection-screen begin of line.
parameters : r2 radiobutton group g1.
selection-screen comment 20(50) text-021.
selection-screen end of line.
selection-screen end of block blk1.
selection-screen begin of block blk2 with frame title text-023.
select-options: s_ernam for anla-ernam,
                   s_erdat for anla-erdat .
selection-screen end of block blk2.
*--INITIALIZATION
initialization.
w_repid = sy-repid.
at selection-screen.
if r1 = 'X'.
    perform selection_screen_validation.
endif.
if r2 = 'X'.
    perform selection_screen_validation.
endif.
*--START-OF-SELCTION
start-of-selection.
if r1 = 'X'.
    perform populate-data.
    perform fill_finaldata.
   perform comment_build using top_of_page.
    perform xls_output.
    perform download.
endif.
if r2 = 'X'.
    perform populate-data.
    perform fill_finaldata.
    perform fill_as92data.
    perform putdata_horizontal.
    perform xls_output_as92.
    perform download_as92.
endif.
*--END-OF-SELCTION
end-of-selection.
if r1 = 'X'.
    perform build_layout.
    perform build_fieldcatalog.
   perform top_of_page.
    perform list-display.
endif.
if r2 = 'X'.
    perform build_layout.
    perform build_fieldcatalog1.
    perform list-display1.
endif.
*&      Form SELECTION_SCREEN_VALIDATION
      text
--> p1        text
<-- p2        text
form selection_screen_validation.
*--validating originating company code
data: l_bukrs like anla-bukrs."#EC NEEDED
if not s_bukrs[] is initial.
    select single bukrs from anla
           into l_bukrs
           where bukrs in s_bukrs.
    if sy-subrc <> 0.
      message e000 with text-001 .
    endif.
endif.
*--validating originating main asset no.
data: l_anln1 like anla-anln1."#EC NEEDED
if not s_anln1[] is initial.
    select single anln1 from anla
           into l_anln1
           where anln1 in s_anln1.
    if sy-subrc <> 0.
      message e000 with text-002 .
    endif.
endif.
*--validating originating Deactivation date
data: l_deakt like anla-deakt."#EC NEEDED
if not s_deakt[] is initial.
    select single deakt from anla
           into l_deakt
           where deakt in s_deakt.
    if sy-subrc <> 0.
      message e000 with text-004 .
    endif.
endif.
*--validating originating asset class.
data: l_anlkl like anla-anlkl."#EC NEEDED
if not s_anlkl[] is initial.
    select single anlkl from anla
           into l_anlkl
           where anlkl in s_anlkl.
    if sy-subrc <> 0.
      message e000 with text-006 .
    endif.
endif.
*--validating originating Date
data: l_date like anla-aktiv."#EC NEEDED
if not s_date[] is initial.
    select single aktiv from anla
           into l_date
           where aktiv in s_date.
    if sy-subrc <> 0.
      message e000 with text-007 .
    endif.
endif.
*--validating originating Fiscal year which first acquisition was posted
data: l_gjahr like anlc-gjahr."#EC NEEDED
if not s_gjahr[] is initial.
    select single gjahr from anlc
           into l_gjahr
           where gjahr in s_gjahr.
    if sy-subrc <> 0.
      message e000 with text-008.
    endif.
endif.
data: l_ernam like anla-ernam."#EC NEEDED
if not s_ernam[] is initial.
    select single ernam from anla
           into l_ernam
           where ernam in s_ernam.
    if sy-subrc <> 0.
      message e000 with text-009.
    endif.
endif.
data: l_erdat like anla-erdat."#EC NEEDED
if not s_erdat[] is initial.
    select single erdat from anla
           into l_erdat
           where erdat in s_erdat.
    if sy-subrc <> 0.
      message e000 with text-010.
    endif.
endif.
endform.                    " SELECTION_SCREEN_VALIDATION
*&      Form POPULATE-DATA
      text
--> p1        text
<-- p2        text
form populate-data.
select bukrs
         anlkl
         anln1
         anln2
         txt50
         txa50
         invnr
         ktogr
         sernr
         menge
         meins
         ivdat
         inken
         aktiv
         deakt
         zugdt
         zujhr
         zuper
         gdlgrp
         anlue
         xafabch
         aibn1
         aibn2
         aibdt
         posnr
         ord41
         ord44
         vmgli
         invzu
         typbz
         lifnr
         ernam
         erdat
        from anla
            into table it_itab1
            where anlkl in s_anlkl and
                  anln1 in s_anln1 and
                  deakt in s_deakt and
                  bukrs in s_bukrs and
                  aktiv in s_date.
if sy-subrc ne 0.
    message e000 with 'Data does not exist'(094).
endif.
if not it_itab1[] is initial.
    select bukrs
           anln1
           anln2
           bdatu
           werks
           gsber
           kostl
           kostlv
           stort
           raumn
           txjcd
           ipsnr
           from anlz
           into table it_itab2
           for all entries in it_itab1
           where bukrs = it_itab1-bukrs and
                 anln1 = it_itab1-anln1 and
                anln2 = it_itab1-anln2.
                  anln2 = '0000'.
    if sy-subrc ne 0.
      message e000 with 'Data does not exist'(094).
    endif.
endif.
if not it_itab2[] is initial.
    select bukrs
           anln1
           anlhtxt
           from anlh
           into table it_itab3
    for all entries in it_itab2
    where bukrs = it_itab2-bukrs and
          anln1 = it_itab2-anln1.
    if sy-subrc ne 0.
      message e000 with 'Data does not exist'(094).
    endif.
endif.
if not it_itab1[] is initial.
    select bukrs
    anln1
    anln2
    afabe
    bdatu
    afasl
    ndjar
    ndper
    afabg
    ndurj
    ndurp
    umjar
    safbg
    zinbg
    inbda
    from anlb
    into table it_itab4
    for all entries in it_itab1
    where bukrs = it_itab1-bukrs and
          anln1 = it_itab1-anln1 and
         anln2 = it_itab1-anln2.
           anln2 = '0000'.
    if sy-subrc ne 0.
      message e000 with 'Data does not exist'(094).
    endif.
endif.
sort it_itab4 by bukrs anln1 anln2 afabe.
if not it_itab4[] is initial.
    select bukrs
          anln1
          anln2
         gjahr
        afabe
        zujhr
        zucod
         ndabj
         ndabp
         kansw
         knafa
         kaafa
         ksafa
         andsj
         andsp
         kanza
kaufw
kinvz
kmafa
         from anlc
         into table it_itab5
         for all entries in it_itab4
         where bukrs = it_itab4-bukrs and
            anln1 = it_itab4-anln1 and
           anln2 = it_itab4-anln2 and
            anln2 = '0000' and
            gjahr in s_gjahr.
    if sy-subrc ne 0.
      message e000 with 'Data does not exist'(094).
    endif.
endif.
sort it_itab5 by bukrs anln1 anln2 ndabj ndabp.
endform.                    " POPULATE-DATA
*&      Form FILL_FINALDATA
      text
--> p1        text
<-- p2        text
form fill_finaldata.
loop at it_itab5.
    loop at it_itab4 where bukrs = it_itab5-bukrs and
                        anln1 = it_itab5-anln1 and
                        anln2 = it_itab5-anln2 and
                        afabe = it_itab5-afabe.
      it_final-afabe = it_itab4-afabe.
      it_final-afasl = it_itab4-afasl.
      it_final-ndjar = it_itab4-ndjar.
      it_final-ndper = it_itab4-ndper.
      it_final-afabg = it_itab4-afabg.
      it_final-umjar = it_itab4-umjar.
      it_final-safbg = it_itab4-safbg.
      it_final-inbda = it_itab4-inbda.
      it_final-ndabj = it_itab5-ndabj.
      it_final-ndabp = it_itab5-ndabp.
      it_final-kansw = it_itab5-kansw.
      it_final-knafa = it_itab5-knafa.
      it_final-kaafa = it_itab5-kaafa.
      it_final-andsj = it_itab5-andsj.
      it_final-andsp = it_itab5-andsp.
      it_final-kanza = it_itab5-kanza.
      it_final-kaufw = it_itab5-kaufw.
      it_final-kinvz = it_itab5-kinvz.
      it_final-ksafa = it_itab5-ksafa.
      it_final-kmafa = it_itab5-kmafa.
      read table it_itab1 with key   bukrs = it_itab5-bukrs
                                  anln1 = it_itab5-anln1
                                  anln2 = it_itab5-anln2.
      if sy-subrc = 0.
        it_final-anlkl = it_itab1-anlkl.
        it_final-anln1 = it_itab1-anln1.
        it_final-anln2 = it_itab1-anln2.
        it_final-bukrs = it_itab1-bukrs.
        it_final-txt50 = it_itab1-txt50.
        it_final-txa50 = it_itab1-txa50.
        it_final-invnr = it_itab1-invnr.
        it_final-sernr = it_itab1-sernr.
        it_final-menge = it_itab1-menge.
        it_final-meins = it_itab1-meins.
        it_final-ivdat = it_itab1-ivdat.
        it_final-inken = it_itab1-inken.
        it_final-aktiv = it_itab1-aktiv.
        it_final-deakt = it_itab1-deakt.
        it_final-gdlgrp = it_itab1-gdlgrp.
        it_final-anlue = it_itab1-anlue.
        it_final-aibn1 = it_itab1-aibn1.
        it_final-aibn2 = it_itab1-aibn2.
        it_final-aibdt = it_itab1-aibdt.
        it_final-ord41 = it_itab1-ord41.
        it_final-ord44 = it_itab1-ord44.
        it_final-vmgli = it_itab1-vmgli.
        it_final-typbz = it_itab1-typbz.
        it_final-lifnr = it_itab1-lifnr.
        it_final-posnr = it_itab1-posnr.
        it_final-invzu = it_itab1-invzu.
      endif.
      read table it_itab2 with key   bukrs = it_itab5-bukrs
                                anln1 = it_itab5-anln1
                                anln2 = it_itab5-anln2.
      if sy-subrc = 0.
        it_final-werks = it_itab2-werks.
        it_final-gsber = it_itab2-gsber.
        it_final-kostl = it_itab2-kostl.
        it_final-kostlv = it_itab2-kostlv.
        it_final-stort = it_itab2-stort.
        it_final-raumn = it_itab2-raumn.
        it_final-txjcd = it_itab2-txjcd.
      endif.
      read table it_itab3 with key bukrs = it_itab5-bukrs
                                 anln1 = it_itab5-anln1.
      if sy-subrc = 0.
        it_final-anlhtxt = it_itab3-anlhtxt.
      endif.
      append it_final.
      clear it_final.
    endloop.
endloop.
loop at it_final.
    move-corresponding it_final to it_final_as91.
    append it_final_as91.
    clear it_final_as91.
endloop.
delete adjacent duplicates from it_final_as91 comparing anlkl bukrs
anln1 anln2.
it_download_as91[] = it_final_as91[].
endform.                    " FILL_FINALDATA
*&      Form BUILD_LAYOUT
      text
--> p1        text
<-- p2        text
form build_layout.
wa_layout-zebra = 'X'.
endform.                    " BUILD_LAYOUT
*&      Form BUILD_FIELDCATALOG
      text
--> p1        text
<-- p2        text
form build_fieldcatalog.
if it_fldcat_head is initial.
    v_pos = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'ANLKL'.
    wa_fldcat_head-seltext_l = 'Asset Class'(093).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'BUKRS'.
    wa_fldcat_head-seltext_l = 'Company'(092).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'ANLN1'.
    wa_fldcat_head-seltext_l = 'Asset No'(091).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'ANLN2'.
    wa_fldcat_head-seltext_l = 'Asset Sub No'(090).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'TXT50'.
    wa_fldcat_head-seltext_l = 'Asset Des.'(089).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'TXA50'.
    wa_fldcat_head-seltext_l = 'Asset Des.'(088).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'ANLHTXT'.
    wa_fldcat_head-seltext_l = 'Asset main no txt'(087).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'SERNR'.
    wa_fldcat_head-seltext_l = 's.no/Expl no.'(086).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'INVNR'.
    wa_fldcat_head-seltext_l = 'Inv No'(085).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'MENGE'.
    wa_fldcat_head-seltext_l = 'Qtty'(084).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'MEINS'.
    wa_fldcat_head-seltext_l = 'Units'(083).
    append wa_fldcat_head to it_fldcat_head.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'INKEN'.
    wa_fldcat_head-seltext_l = 'Inv indi.'(082).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'IVDAT'.
    wa_fldcat_head-seltext_l = 'Last inv date'(081).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'AKTIV'.
    wa_fldcat_head-seltext_l = 'Asset Capital date'(080).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'GSBER'.
    wa_fldcat_head-seltext_l = 'Busin. Area'(079).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'KOSTL'.
    wa_fldcat_head-seltext_l = 'cost centre'(078).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'KOSTLV'.
    wa_fldcat_head-seltext_l = 'CC respon.for asset'(077).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'WERKS'.
    wa_fldcat_head-seltext_l = 'Plant'(076).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'STORT'.
    wa_fldcat_head-seltext_l = 'Asset location'(075).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'RAUMN'.
    wa_fldcat_head-seltext_l = 'Room'(074).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'TXJCD'.
    wa_fldcat_head-seltext_l = 'Tax. Jur.'(073).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'ORD41'.
    wa_fldcat_head-seltext_l = 'Evaluation Grp 1'(072).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'ORD44'.
    wa_fldcat_head-seltext_l = 'Evaluation Grp 4'(071).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'GDLGRP'.
    wa_fldcat_head-seltext_l = 'Evalu. group 5'(070).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'ANLUE'.
    wa_fldcat_head-seltext_l = 'Asset Super No'(069).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'LIFNR'.
    wa_fldcat_head-seltext_l = 'Vendor Acct. No.'(068).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'TYPBZ'.
    wa_fldcat_head-seltext_l = 'Reference no'(067).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'AIBN1'.
    wa_fldcat_head-seltext_l = 'Original Asset Trans.'(066).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'AIBN2'.
    wa_fldcat_head-seltext_l = 'Original Asset Trans.'(065).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'AIBDT'.
    wa_fldcat_head-seltext_l = 'Trans. Asset'(064).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'POSNR'.
    wa_fldcat_head-seltext_l = 'WBS Elt. Invt. Proj.'(063).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'VMGLI'.
    wa_fldcat_head-seltext_l = 'Property clas.key'(062).
    append wa_fldcat_head to it_fldcat_head.
   V_POS = 0.
    v_pos = v_pos + 1.
    w_field-col_pos = v_pos.
    wa_fldcat_head-tabname = 'it_FINAL_AS91'.
    wa_fldcat_head-fieldname = 'INVZU'.
    wa_fldcat_head-seltext_l = 'suppl.inv spec.'(061).
    append wa_fldcat_head to it_fldcat_head.
endif.
endform.                    " BUILD_FIELDCATALOG
*&      Form COMMENT_BUILD
      text
     -->P_TOP_OF_PAGE text
*form comment_build using top_of_page type slis_t_listheader.
data: ls_line type slis_listheader.
****Header
clear : ls_line.
ls_line-typ = 'H'.
LS_LINE-KEY: not used for this type
ls_line-info = 'ASSET MASTER DATA LIST'.
append ls_line to top_of_page.
****Selection
clear ls_line.
ls_line-typ = 'S'.
ls_line-key = 'Key 1'.
ls_line-info = 'Asset Records'.
append ls_line to top_of_page.
****Action
clear ls_line.
ls_line-typ = 'A'.
LS_LINE-KEY: not used for this type
ls_line-info = 'for AS91'.
append ls_line to top_of_page.
*endform. "comment_build
      FORM top_of_page                                              *
*form top_of_page.
call function 'REUSE_ALV_COMMENTARY_WRITE'
      exporting
           i_logo             = 'ENJOYSAP_LOGO'
           it_list_commentary = top_of_page.
*endform. "top_of_page
*&      Form LIST-DISPLAY
      text
--> p1        text
<-- p2        text
form list-display.
wa_layout-colwidth_optimize = 'X'.
call function 'REUSE_ALV_GRID_DISPLAY'
       exporting
            i_callback_program     = w_repid
           i_callback_top_of_page = 'TOP_OF_PAGE'
            is_layout              = wa_layout
            it_fieldcat            = it_fldcat_head
           i_background_id        = 'ALV_BACKGROUND'
       tables
            t_outtab               = it_final_as91
       exceptions
            program_error          = 1
            others                 = 2.
if sy-subrc <> 0.
write:/'No Top of Page'(098).
endif.
endform.                    " LIST-DISPLAY
*&      Form DOWNLOAD
      text
--> p1        text
<-- p2        text
form download.
perform setup_header.
call function 'DOWNLOAD'
       exporting
            filetype                = 'DAT'
       tables
            data_tab                = it_download_as91
            fieldnames              = it_head
       exceptions
            invalid_filesize        = 1
            invalid_table_width     = 2
            invalid_type            = 3
            no_batch                = 4
            unknown_error           = 5
            gui_refuse_filetransfer = 6
            customer_error          = 7
            others                  = 8.
if sy-subrc <> 0.
write:/'Error in file Type'(097).
endif.
endform.                    " DOWNLOAD
*&      Form setup_header
      text

How to changes baseline date in miro with Posting date

Please tell me the procedure to change the baseline date in miro with posting date (EKBE-BUdat) on basis of Purchase order No (EBELN) .
I tried it by using user exit :-EXIT_SAPLKONT_011 Enhancement : LMR1M002 but got stuck somewhere .Please tell me how to work on this .

hey guys my problem is solved by using a badi " MRM_PAYMENT_TERMS" .In method "PAYMENT_TERMS_SET" writing the code .

Problem displaying data in Excel with Jsp

HI,
For some reason when i save data from jsp to excel, my Excel dont display data.This code was working fine from past 3 years all of sudden it starts givin this problem.
However When i open my .xls file in notepad i see data there. The problem is because of XML declaration (<?xml version="1.0" encoding="UTF-8"?> which parsed generate. If i remove this it works fine.
Out put in file looks like this
<?xml version="1.0" encoding="UTF-8"?>
<table border=1 width="100%">
<tr>
<TH>Name</TH>
<TH>Last Name</TH>
<TH>state</TH>
<TH>Country</TH>
<TH>Currency</TH>
</tr>
<tr>
<TD class="odd">John</TD>
<TD class="odd">Hayden</TD>
<TD class="odd">IL</TD>
<TD class="odd">USA</TD>
<TD class="odd">USD</TD>
</tr>
<tr>
<tr>
<TD class="odd">Ricky</TD>
<TD class="odd">Ponting</TD>
<TD class="odd">IL</TD>
<TD class="odd">USA</TD>
<TD class="odd">EUR</TD>
</tr>
</tr>
</table>
Jsp Code
String rptHTML = (String)session.getAttribute("ReportStrHTML");
     System.out.println(rptHTML);
     response.setHeader("Content-Disposition","attachment;filename=Test.xls");
     response.setContentType("application/vnd.ms-excel");
Thanks

In Excel, Tools > Macro > security > medicum and Trusted tab check To access VB.

How can i display a list of all the names stored in the Mail app?

When sending an email, the program shows a list of names according to the first and subsequent letters that I type into the To: field. There are times I cannot recall someone's email user name. How can I display a complete list of all the names Mail has stored? I know that I can go to the To: field then type in the letter A, then write down all listings under A, and then repeat for each letter of the alphabet, but there should be an easier method.
I have perhaps dozens of names in Mail, but only five names in Address Book, so the latter does me no good.

On the menubar, Mail > Window > Previous Recipients
Regards,
Captfred

How to get Unique calid for users with same name in multiple domain env..

I found we need to use "-k legacy" option for creating users in non-hosted setup..
I had two domains default as xxxx.com and the one that I created as yyyy.com
When I have users with same name in two of the domains as user1..
The calid for both of them is... user1 ....so they share the same calendar
When Im in valid SSO of yyyy.com I get the mail account for user1 as [email protected] .....but the calid .. common as user1
How I can get unique calid for users under two domains..
whether I need to set Hosted domain support...Then how the mailid's differ with out using hosted domain support..
And I need to login UWC without using @domain.com...
Help me on this...
Ashik

Do you have UWC and Cal configured at least for virtual domain support?
basically.. for discussion.. let's say you have three domains on your server.. 1st domain is the default domain. other 2 domains are virtual domains.
if all domains were created with mail and cal support (-S mail,cal).. you would use the following options when creating users:
1) for the default domain.. you must use the "-k legacy" option when adding users.
2) for the other two domains.. when you create the user.. do NOT use a "-k" option.
If you do not use the "-k" option.. it defaults to "hosted" which will cause the user's calid to be [email protected]
If you Do use the "-k legacy" option.. it will create the calid as just "userid"
With regard to logging into UWC without the @domain.com part of a username in a hosted domain.. the easiest way to avoid this.. is to point a host name under the hosted domain to the server.
if you point webmail.xxxx.com to the server... and then access it via:
http://webmail.xxxx.com/uwc/
any users in the xxxx.com hosted domain will NOT need to use @xxxx.com when logging in... they can just use "userid"
This feature does not take any special configuration (aside from adding a DNS entry for the hosted domain)
Hopefully that helps.

How to create an instance of myClass with a name that is in a variable?

Hey Guys,
How can I create an instance of myClass with a name that is in a variable?
Normally a new instance is defined something like:
myClass myName = new myClass ();
I want to make a method which creates instances of a certain class (ie myClass) with names that are given to the method within its arguments.
So something like:
public void myMethod(String className) {
myClass value of className = new myClass();
So if className = "FirstName" then an instance of myClass should be created with the name "Firstname", like:
myClass Firstname = new Firstname;
Thanks.
Jasper

Thanx for your reply's
If I understand the tutorial correctly I should do
something like this to start the map:
Map<String, myClass> myMAP = new HashMap<String,
MyClass>();
and something like this to add a new instance of the
class every time:
myMAP.put(myString, new myClass());
So this would result a link between the Strings and
the instance of the Class?
Thanks
Message was edited by:
JasperLevinkyep. the String is the key, and the MyClass instance is the value. to get the value out of the map, use map.get(key)

How to specify Sql Loader input file with dynamic name

The input file name likes pochange_YYYYMMDD.dat which is generated by other program each day.
I want to load this file to a table.
Any help? Thanks a lot

I thought in an excellent strategy to do this:
Conditions:
- you have to have only one file in the folder with the data.
- Independently of the name of that file. A process is always going to change its name to a fix name.
- the controlfile must at another fixed path
the scripts is this one:
joel_sqlloader.bat
ren *.dat always.txt
sqlldr <user>/password data=always.txt control=<another_path>/my_ctl.ctl
- In a folder you will have these files:
* joel_sqlloader.bat
* pochange_YYYYMMDD.dat
- In another folder you will have:
* my_ctl.ctl
Did you get it ?
Joel Pérez
http://otn.oracle.com/experts

How to i display data of piechart with legend names?

Similar Messages

Maybe you are looking for