How to i repair a printer not activated, error code -30 message when trying to save a file to pdf

Please help

Hi,
Thank you for posting in Windows Server Forum.
Yeah, agree with Milos. Please provide more information for further troubleshooting. 
From your initial subject it seems you are facing issue with printer activation on your server. The error may be caused if the wrong printer is set as the default printer, the printer driver is missing, or if there are conflicts in the device manager. Please
make sure below 3 steps whether it’s get some workaround.
Step one: Make sure the desired printer is set as the default printer 
Step two: Re-install the USB Composite Device from Device Manager  
Step three: Reinstall the Software for that particular printer
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

  • Activation error: Printer not activated, error code 20

    I have had my officejet 4215 all-in-one printer well over a year and it has connected and printed whatever I wanted.  Yesterday when I wanted to print an email it would not and the following box popped up: Activation error: Printer not activated, error code 20.  Then the next box that popped up said: Printer Error  An unknown error occurred while printing.
    If I copy the email over to a Microsoft Windows page, then i can print it fine.
    Any idea how to fix this so I can print email's like I used to?
    Rey

    What operating system?  What email program are you trying to print from?
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • When I try to print from web page I get "printer not activated - error code 30", but I can copy text into Word document & printer works.

    I am unable to print anything from an internet web page. I continually get "printer not activated, error code- 30" followed by "An unknown error occurred while printing". I can copy the material from the web page, place into a Word document and then print. This just started yesterday and I have no idea why. Would appreciate your advice!

    See this:
    [http://kb.mozillazine.org/Problems_printing_web_pages#Prints_to_a_small_portion_of_the_page]

  • When I try to print from web page I get "printer not activated - error code 30", printer works on Internet Explorer

    When I try to print from web page I get a dialogue box "Printer not activated - error code 30" followed by a dialogue box "An unknown error occurred while printing". The printer works on websites when I use Internet Explorer. Also, if I copy the web page and paste it into a Word document, I can print a copy. This issue just started this week; I have not encountered this problem prior to this week. Please advise.

    What does that error message say?
    See this: http://kb.mozillazine.org/Problems_printing_web_pages

  • Error code 2343 message when trying to repair/remove iCloud 2.1.1.3...

    I am trying to remove iCloud 2.1.1.3 and I get an error message "The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2343." After I click "OK", it gives me the message "Fatal error during installation." How do I fix the error? What to do?

    http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/erro r-code-2343-message-when-trying-to/996dc521-9a03-4914-b2f6-dbf2b5293730

  • "Entitlements are not valid" error message when trying to sync ipa file from iTunes to iPad

    Is anyone else getting this error message, "Entitlements are not valid",  when trying to sync .ipa file from iTunes to iPad?
    The issue I'm having is getting the ipa file that was built by the 'Adobe Flash Packager for Iphone' installed into my iPad.
    So, I have a swf file that works and was able to publish it into the Android Market.  I then compiled and build the same flash project with the Packager for Iphone into an .ipa file.  But when I try and install this .ipa file into my iPad to do my testings, i'm getting the error message. 
    I would like to test my ipa file in my iPad device before submitting it to the Apple Store.
    Any help would be appreciated. thank you.

    Developing for iphone can be amazingly complicated and frustrating.  (even before you start coding).  The process of having to create a Certificate, to approving the Certificate, to Assigning the deviceIDs to the certificate, to creating the AppIDs, to creating the provisioning profiles and then creating the .p12 file... is just too tedious. 
    I solved the problem of the "Entitlements are not valid".   The AppID i had set in the iPhone Developer Portal did not match that of the AppID i had set in the Adobe Flash CS5 -> Publish Settings.  (ie. com.yourdomainname.yourappname).  After I re-entered my AppID and compile, i was able to sync the .ipa file into my ipad. 
    I wish the error message had been a little more descriptive.  Could have saved me a whole day.
    I hope this helps others.  But my guess is, if you don't set the 40 character device ID correctly, or the email in the signingcertificate correctly, you'll get this same generic error message.

  • 'Activation error..' message when uploading rules for multiple territories

    Hi All,
    When trying to upload rules for multiple territories using Excel, only a few territories get activated and for the rest an error saying 'Activation Error for Function <hexadecimal values>...N: see following message for details' is displayed. It was found that this is due to the territories getting locked.
    The create_rule() and save_rule() methods of CL_CRM_FDT class and FM  CRM_TERRMAN_LINK_BUFFER_UPDATE are used for this functionality.
    Kindly suggest some ways to unlock or any other alternatives.
    Thanks & Regards
    Jagathshree

    Hi Leonie,
    Thanks for your reply.
    Error message below. The preview is fine . I can discount the first 2messages as its a new computer so plenty of disk space and upload doesn't seem to be interrupted. I have uploaded to iphoto before. have tried to upload 3times with the same error message. I had to photo my slides with a Kaiser Baas photo maker , which apparently doesn't scan but takes photos in megapixels of the slides. I am wondering now if the format is incompatible though they are jpg files or the colour type wrong. The image files are  around 1-3 mb each and  72 ppi. I think  I will now scan them properly with a scanner to 300dpi anyway to improve quality.
    Apple  talks about image files not being too big for uploading but gives no sizing of what too big is?
    Error message
    1. Upload Error. Loss of connection or file corruption during order upload may cause an incomplete order. Resubmitting your order usually resolves this issue.
    2. Low Disk Space. If your computer is running on low disk space, your files may be assembled incorrectly. Create more space by deleting unused files.
    3. Unreadable PDF file or image files. Files are sometimes assembled incorrectly due to CMYK or Grayscale color space. Use the RGB color space for best results.

  • When trying to save a file under Excel 2008, ver 12.3.3, with extension .xlsx or .xlx, I am told it can't be saved because it is "read only." How do I change the file from read only?

    When I try to save a file using Excel 2008, ver 12.3.3, with extension either .xlsx or .xls, I get a message saying it cannot be saved because it is "read only." How do I change it from read only? (And how did it ever get to be read only?)

    Save the file as a new name. Close and Open the new file.
    Most likely when a file transfer happens, Office makes the file 'Read Only'.
    If you have two opened files with the same name, the last opened file will be 'Read Only'.

  • How do I resolve a "printer not connected" error message?

    Dear Mac Community,
    For the better part of a year I have printed flawlessly to my HP Color LaserJet CP4020 on my home wireless network. Recently I upgraded to OS X 10.8.4 and now when I print, the queue stalls and I receive the following error message, "The printer is not connected."
    Here is what I have tried so far to resolve the issue but to no avail:
    Downloaded and installed the latest HP firmware and software drivers
    Deleted the printer and added it again in Preferences>Print & Scan
    And, of course, the above noted bullet point is the rub: If the printer were not connected to my wireless network then it would be unable to be added! But since I can add the printer, my OS is definitely seeing the printer on the network.
    After the above diagnostics I tried printing from native Mac OS apps (e.g. TextEdit) and non-native apps (e.g. Microsoft Word), and both worked.
    Then they stopped.
    Then they would print after several minutes of delay (e.g. a single sentence Text Edit test print page took over a minute and a five sentence Word document took over 5 minutes).
    Then they stopped.
    And now I cannot print anything!
    In case it helps, my specifications are as follows:
    MacBook Pro running OS X 10.8.4 with 8 GB RAM, 500 GB HD, 75 GB available HD space
    HP Color LaserJet CP4020, Firmware v.20120112 07 .111.0, Software Driver v. 9.4
    Any help anyone could provide would be GREATLY appreciated.
    Sincerely,
    Randy

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Select "/var/log/cups/error_log" from the file list on the left side of the Console window. If you don't see that list, select
    View ▹ Show Log List
    from the menu bar. Then select the messages from the time of the last failed printing attempt. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
    If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.

  • Error Message  when trying to "Save Email as Activity" on Outlook 2007

    Hi all,
    This is a problem that we have logged with SAP, but they cannot find any reasons as to why we are having the problem. So I'm hoping someone here might be able to shed some light...
    After logging onto SAP through Outlook:
    When "Saving an email as Activity" using the Outlook ADDON, we get the following error message:
    AppName: bo_syncext.exe      AppVer: 8.0.0.49      ModName: bo_syncext.exe
    ModVer: 8.0.0.49      Offset: 000cc9d5
    This does not seem to work on any of our computers, except one!
    He is a Superuser, and he can save emails on his PC only.
    I can also save the emails, if I am logged on his computer, and am set up as a Superuser. I cannot if I am not a Superuser.
    He and I cannot send emails as a Superuser on my PC.
    This would lead me to think that it is a problem with our PC settings (security settings?).
    Has anyone else had this problem?
    Outlook version: 2007 (12.0.6514.5000) SP2 MSO (12.0.6425.1000)
    SAP Business One 2007.
    Many thanks
    Shaoni

    Hi
    I also have the same issue.
    I can save an email as an activity for only one user, this user is a super user.
    If i log on to that users machine as them, then sap as a user with the issue change them to a super user it works.
    However logged on to any other machine it won't work. We get the error message ;-
    Outlook itegration - error signature - AppName bo_syncext.exe, AppVer 8.0.0.49  Mod Name ntdll.dll ModVer 5.1.2600.3520
    Has anyone fixed this on a system ???

  • "not a valid Win32 application" message when trying to install iTunes 7.0

    I have downloaded the new iTunes 7.0 setup file. When I click on the icon on my desktop, I get the message, " C:____\iTunesSetup.exe is not a valid Win32 application".
    This problem doesn't seem to be specifically addressed in the troubleshooting suggestions on this website. Does any one have any suggestions on what I can do to resolve this problem? I've tried uninstalling older versions of iTunes and Quicktime, and re-downloaded new software package, but problem continues.

    After using the Windows Installer clean up tool and removing the iTunes 7.0.7.16 install file I was able to update to 7.0.2

  • Element 13 editor does not launch and I do not have error code of message

    I have E13 for a couple of months.  I have used the organizer and editor without fault.  For some unknown reason the editor will not lauch.

    Hi Carolyn,
    Thank you for your time and response. The trouble is I am unable to launch iTunes? I have restarted my macbook air a number of times to try and initiate the application but the issue persists and the application remains unresponsive. Will not launch?
    Thanks

  • I get this message when trying to open a file from my company cloud: Error: This action could not be taken because the applet has not initialized. What do I need to do to be able to look at a file? Thank you!

    Help!

    There is software you installed to work with your company's cloud service, update it or talk to the developer.
    If it's Apple's software,  then run through this list of fixes.
    ..Step by Step to fix your Mac

  • I keep getting an error code of 8803 when trying to empty trash--specifically uninstalled mackeeper and now it will not let me empty the trash of it.

    thanks.

    Try SHIFT  COMMAND  DELETE
    Try right (control) clicking on the trash can and select empty trash
    Also check here:
    http://www.thexlab.com/faqs/faqs.html
    Also you can check TrashIt:
    http://www.nonamescriptware.com/

  • Printer not activateed error-20 on F2440 printer, windows 7

    Printer F2440 is on b;ut will not print. I get msg: Printer not activated error-20. Now what do I d o  ?

    Hey @Rosty,
    Welcome to the HP Support Forums!
    I would like to assist you today with resolving the error message 'Printer Not Activated Error Code 20' that you're getting on your Windows 7 computer when using your HP Deskjet F2440 Printer.
    To start troubleshooting can I please have you click here. When the support document opens please run through Step one, Step two, and Step three. When you get to Step three for reinstalling your driver, please click here to access the latest driver for your printer series. Once the website opens select the Download button on the top left.
    Once troubleshooting is complete, please test your printer again.
    Please respond to this post with the result of your troubleshooting. Best of luck!
    X-23
    I work on behalf of HP
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Maybe you are looking for