How to identify built in laptop camera

I have a refurbished HP laptop. It has a built in webcam. I have no idea what webcam it is.
lsusb doesn't help me, as it's not a usb device.
How do I identify the hardware so that I may find the right drivers for it?

The webcam is physically present, though it's entirely possible that it doesn't work. It is, after all, a refurb. I'm not sure what HP model it is (all identifying stickers were removed before it came into my possession) and I'm not sure if it ever worked (I've never had another OS on it before).
> sudo lsusb -v
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 3.03
iManufacturer 3 Linux 3.3.7-1-ARCH ehci_hcd
iProduct 2 EHCI Host Controller
iSerial 1 0000:00:1a.7
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 4
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Port 4: 0000.0100 power
Device Status: 0x0001
Self Powered
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 3.03
iManufacturer 3 Linux 3.3.7-1-ARCH uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1a.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0001
Self Powered
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 3.03
iManufacturer 3 Linux 3.3.7-1-ARCH uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1a.1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0001
Self Powered
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 3.03
iManufacturer 3 Linux 3.3.7-1-ARCH uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1d.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0001
Self Powered
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 3.03
iManufacturer 3 Linux 3.3.7-1-ARCH uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1d.1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0001
Self Powered
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 3.03
iManufacturer 3 Linux 3.3.7-1-ARCH uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1d.2
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0001
Self Powered
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0001 1.1 root hub
bcdDevice 3.03
iManufacturer 3 Linux 3.3.7-1-ARCH uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:1d.3
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 1 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Device Status: 0x0001
Self Powered
Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 3.03
iManufacturer 3 Linux 3.3.7-1-ARCH ehci_hcd
iProduct 2 EHCI Host Controller
iSerial 1 0000:00:1d.7
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 11
bDescriptorType 41
nNbrPorts 8
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00 0x00
PortPwrCtrlMask 0xff 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Port 4: 0000.0100 power
Port 5: 0000.0100 power
Port 6: 0000.0100 power
Port 7: 0000.0100 power
Port 8: 0000.0100 power
Device Status: 0x0001
Self Powered

Similar Messages

Video Capture - How to Shut off the Internal Camera on a MAC?

Have MAC CS4...BUT im a PC GUY!!
Need help with capture. I have a MAC BOOK Laptop OSX-10 and when I try to capture from the firewire attached sony camera I get the built in laptop camera instead of the Sony Camera. I have tried different standard and alternate an sony camnera settings. I CAN take control of the camera (play + rew etc)...but I cant get the video to override the built in laptop camera.
Is there some setting I need to disable to get the laptop camera go away?
Thanks for your help

There is an article on iSight,
Article that might help you.
Good luck,
Hunt

After upgrading to Lion, my Macbook Air's built in iSight camera has disappeared. I'm not sure how to get it recognized again.

After upgrading to Lion, my Macbook Air's built in iSight camera has disappeared. I'm not sure how to get it recognized again. Help -Sami

Well, if you did then you may be able to track it, if you did not it's not possible.

How can I use the built-in Isight camera with an external camera (usb/firewire) at the same time?

How can I use the built-in Isight camera and an external video camera at the same time?
I'm wanting to stream over Oovoo/Skype/etc. using 2 cameras.
Thanks

Simple question with a not so simple answer.
(a) If you mean that you want to run multiple apps simultaneously using a different camera with each app, you may encounter computing power limitations. Digital video is processor intensive. The only way to know if your Mac can do this it to try it. If the video does not work together but each app works when it it the only app running, you are likely overloading your Mac's ability to process and/or move all the required data in your data bus. You can get a better indication of whether this is the case by watching your Activity Monitor utility while running the apps you want to use.
(b) If you mean that you want to have more than one compatible camera connected to your Mac simultaneously for ease of changing between video sources, some, but not necessarily all, apps you are using to operate your camera(s) allow you to select between your cameras.
How you select among connected cameras depends on which application you are using. Here is how camera selection works in a few examples:
(1) For iChat, you can choose which iSight you use in the "Camera:" choices bar in iChat > Preferences... > Audio/Video that appears when more than one compatible camera is connected. Although your camera choices will be different, the choices bar will look something similar to the Preferences settings shown here:
If you cannot see the "Camera" choices bar, your Mac is recognizing only one (or none) of your cameras. In that case, consider the suggestions fromhttp://support.apple.com/kb/HT2090 for iSight problems or refer to your other camera's documentation for help.
This particular choices bar solution applies ONLY to iChat. Most other applications also have settings that allow you to choose which camera to use. However, they do not all work the same way.
(2) For instance, iMovie HD's camera choice is NOT set via Preferences. When you have more than one compatible camera connected, iMovie6 HD uses a drop-down menu choice something like this (depending on which version of iMovie you use):
Note: Because I had no built-in iSight connected when I made this example, and because my external iSight was not connected, the drop-down menu showed only "Time Lapse." Because your Mac has a built-in iSight, your built-in iSight would show in the drop-down menu even when no other camera is connected. Connecting an additional Mac compatible webcam should allow you to choose either camera.
Other iMovie versions work slightly differently.
iMovie 9 (from iLife '11) uses a different camera choice button shown in this article:
http://docs.info.apple.com/article.html?path=iMovie/9.0/en/mov39f84285.html
iMovie 8 (from iLife '09) is slightly different as explained in this article:
http://docs.info.apple.com/article.html?path=iMovie/8.0/en/10172.html
In general, you can use your Mac's help for the application in use to find out how to select among more than one connected camera.
(3) Photo Booth in Snow Leopard 10.6.x and later uses the Photo Booth > Camera menu command to select which camera to use.
Note for readers with older Mac OS X: The previous version of Photo Booth that came with Tiger (10.4.x) is such a simple, basic app that it offers no menu selectable choice. Unless your built-in iSight is already occupied as the camera being used by some open application before you launch Photo Booth, Photo Booth will use ONLY your built-in iSight.
However, you can use the trick from ¶ 4 of http://docs.info.apple.com/article.html?artnum=302781 to let Photo Booth use an external camera.
(If you have an external Firewire camera connected, it may be used in preference to any USB webcam. If that is a problem for you, merely disconnect the problem Firewire device.)
(4) For FaceTime, launch the app and click the Video menu item.
If your Mac recognizes more than one connected compatible camera, a "Camera" section listing the cameras from which you can choose will appear there. Clicking on the desired camera name will let you select the one you want as shown in this image from my Mac Pro and LED Cinema Display:
If your Mac recognizes only one compatible camera, the "Camera" section will not appear in the Video menu, but FaceTime will automatically use the connected camera that is recognized by OS X.
(5) I do not use Skype oir Oovoo. For those or other apps, see Help for each app for info on how to select your desired camera.
Message was edited by: EZ Jim

How do I configure the brightness, contrast and colour settings of the built-in HD Camera on iMac?

I have recently purchased an iMac after making the switch from PC.
I am struggling to find an app, or settings configuration where I can modify the brightness, contrast, color and white balance settings for the built-in HD camera. The online manuals didnt give me any answers so I thought I would turn to the communities pages for some help.
The room where the iMac is situated has a light behind me and I am facing the wall so not much light in front of me except the ambient light from the screen. Friends on FaceTime, Skype etc. say that the picture from the built-in camera is too dark and difficult to make out my face clearly. How can I fix this?
Any and all help is most welcome.
Thanks
UKRichard

I would move it if it weren't the main room light that is fixed to the ceiling. Not remodelling my house just for the iMac camera. On my old PC all the webcams came with utilities to adjust these settings, I am surprised Apple dont have something similar for free.
I did see another post about iGlasses here, but not sure I want to pay $10 just to adjust my camera settings
Message was edited by: ukrichard

How to I get the built-in iSight camera to work?

My built-in iSight camera is working but the "capture" button is greyed out and I can't record.

Hi there,
You may want to take a look at some for the troubleshooting steps found in the article below, specifically the section titled "Built-in iSight cameras"
How to Troubleshoot iSight
http://support.apple.com/kb/ht2090
Hope that helps,
Griff W.

How does thw firm ware for the built in web cam on a pavilion G6 get reactivated or re-loaded?cc=US

how does the firm ware for the built in web cam on a pavilion G6 get reactivated or re-loaded? I have been attempting to get this done all day. I have downloaded new drivers from HP, used the recovery manager etc and nothing seems to work. I have owned this HP pavilion G6 for a couple of months and am already sick of the problems I am having. Windows 7 and HP; what a great team!

i m facing same problem.
dont know how HP!! can Cheat Customers in India??
i don't think they supply GOOD pieces to the 125 Million Country??!!

How do I get iMovie to recognise & allow me to use the built in iSight camera?

How do I get iMovie to recognise & allow me to use the built in iSight camera?

You do not mention what version of iMovie you are using, so I will assume it is the same as mine, iMovie '11, version 9.0.8
When you launch iMovie you should see, just above the Event Library, a camera icon. Click that.
Once you click it you will see a new window labeled "Import From: Built-in iSight." In the bottom right corner there will be a button labeled "Capture." Use that when you are ready to capture your video.
Best of luck.

Not recognising built in Web camera in HP G42 Laptop PC.PL suggest remedy.

Laptop is not recognising built in Web camera in HP G42 Laptop PC. When I am using Skype I can see the photo of other party but neither they nor me are able to view my own photo. PL suggest remedy.

This should help:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03430151
also
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02452221
Wish you luck,
Karthik
--Say "Thanks" by clicking the Kudos (purple thumbs up icon in the lower right corner of a post)
--Please mark the post that solves your problem as "Accepted Solution"

Built-in iSight cam randomly stopped working. All I get is a green screen!

I used it just yesterday with both Photobooth and iChat with no problems what so ever. Now all it shows is a green screen! Anybody know what the problem may be and how to fix it??? Thanks!
-Jonathon

Welcome to Discussions, -Jonathon
Here are the solutions that help most users who encounter green-screen problems. None are complicated, but the only way to find which one will work for you is to try them one-by-one until you find the one that fixes your Mac.
(1) Check your System Preferences as explained in this kbase article about Built-in iSight camera produces blue or green pictures.
(2) If your System Preferences are set correctly, try every suggestion re: Built-in iSight in the "How to Troubleshoot iSight" article.
Be sure to include the checks for whether the problem is "application-specific" and "user-specific".
If you need help creating a new user account to check whether your problem is "user-specific" during Troubleshooting, see this Help article.
(3) If resetting or the other suggestions do correct your problem, try the following:
• Backup your Home Folder, or at very least, your important files.
• Repair permissions. (Click here if you need help.)
• Then download and apply the Mac OS X 10.4.10 Combo Update v1.1 (iNtel).
• Finish with another Permissions Repair, and then check your iSight again.
Users have reported fixes to a variety of audio, video, connectivity, and software conflicts and unreliability issues after properly applying Combo Updates.
(4) A few iNtel Mac laptop users have also reported success after unplugging their Macs and leaving the battery out for half-an-hour to overnight.
(5) If none of these suggestions help, contact Apple or your Apple-Authorized Service Provider for a professional check.
EZ Jim
PowerBook 1.67 GHz Mac OS X (10.4.10) G5 DP 1.8 External iSight

How do I get my laptop to connect

Hey all,
I have been searching and killing my brain cells for 2 hours.
I need to know how to connect a laptop-fresh install of Windows XP Pro- to my Linksys 150?
I have tried everything I think.
The 150n is already running 2 computers, now I just need to get it to work WIRED on my laptop.
Thanks for any help.
Rick

I got sick of Windows XP Pro and put Windows Vista back on, as the laptop came with it anyway, and Vista picked it up no problem.
Thanks for the reply though-

Built in isight camera not working with flash

My built in isight camera on my macbook works just fine in photobooth and in skype or ichat.. but just in the past week or so, it will not work when im on websites that use flash. I've seen some threads that say that I need to go into settings and make sure that the camera chosen is the USB. When i go into flash settings, the only options are Google1, Google2, or Built in isight. It doesn't work with any of them. Does anyone have any idea how I can make it work again?

zeppelinfan1234 wrote:
I don't have google add ons. I followed the path but i have no Google folder in Application Support. Any other suggestions?
Your problem is not the same as that posted by the OP, and your system info shows you using Mac OS X (10.5.6).
For your symptoms with this system, I suggest you do the following:
(1) Apply the 10.5.8 Combo Update using the following process:
• Backup your Mac and turn off Time Machine
• Disconnect peripherals and restart Mac
• Use Disk Utility to repair permissions
• Download and install
http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate
• Repair permissions again immediately following the restart that finishes the update.
• Test whether Flash works for you now.
(• Turn Time Machine on later when you are satisfied that the update worked.)
(2) After applying the 10.5.8 Combo, if you are still having problems, download and install the latest Flash player compatible with your system:
http://get.adobe.com/flashplayer/otherversions/
Also check any other third-party browser plugins or other add ons. Apply all available updates and uninstall any third-party items that are known to be incompatible with your system.
Message was edited by: EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.5); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.5)
LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod touch 4.1

How to Identify an item as a Raw material or not?

Hello,
I would like to know how to identify a particular item that is bought, if it is a raw material that will be used for further processing to build any other finished product or if it is a finished product that can be sold directly. I need to find out which table and which column we can find the information from?
For example, we bought an item like motherboard, which is used as a raw material to build a laptop.
I suppose it is clear, so, can any one let me know which table has this kind of information. Is it available in the Purchasing module tables like PO_Headers_all, etc..
Thank you

Check table MTL_SYSTEM_ITEMS_B, COLUMN BOM_ITEM_TYPE.
BOM_ITEM_TYPE = 1 (Model)
= 2 (Option Class)
= 3 (Planning)
= 4 (Standard )
So if BOM_ITEM_TYPE 1 means it is configurable. & 4 means it can be used as raw material as well as individual product ex. keyboard.

How to Identify a Meth Lab!!!!!

How to identify a Meth Lab.
Knowing a law enforcement officer for 30 years,
I wanted to know how to identify a Meth Lab.
Following, are four photos he showed me.
I think it's pretty obvious which one is the Meth Lab.
Please Click On any Text in Blue as that automatically links to information.
PC (NDEGR)

Hmm,
The yellow Lab looks like a dog from Hellraiser and the black Lab looks just like a normal family pet. The chocolate Lab looks like its about to go for somebody (probably the guy with the camera) and the meth Lab is... probably very excitable!
Rank - Mostly Harmless.

HT2433 My laptop opened with a grey flashing file folder with a question mark inside it . How to to open my laptop! I have tried fir e clising several times and restArting nope nada!

My laptop opened with a grey flashing file folder with a question mark inside it . How do I open my laptop! I have tried force closing several times and restArting nope ! nada! Suggestions?

That folder with the question mark icon means that the MacBook can't find the boot directory. That can either mean it can't find the hard drive or the Operating System data on the hard drive is somehow corrupted.
With 10.4, 10.5 or 10.6 put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
Or if you are running 10.7 Lion, 10.8 Mountain Lion or 10.9 Mavericks, boot from the recovery partition (Command +R on boot) and use Disk Utility to repair your OS 10.7, 10.8 or 10.9 partition.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
If it is, then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions. After repairing use Startup Disk from the same menu to choose your hard drive for restarting from your hard drive.
If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead.

How to identify built in laptop camera

Similar Messages

Maybe you are looking for