How to include citation information into document description

I am a chemistry professor in a small college and have a large number of journal articles as pdf's that I reference in my research. I'd would like to include fields for the article citation such as: Journal, Volume, Issue, page, Author 1, Author 2. I can copy these items in Zotero or Endnote, but it seems logical that they should be imbedded in the document and part of the Document Description and go along if I share the document with a student or collague.
I have Acrobat 6.0 and would upgrade if a newer version of Acrobat would to this. I would also really like to avoid using "metadata".

Metadata is the logical way to include the information. You could add a text field, possibly making it hidden if desired, that contains the information. The standard form text field is markup and would not print if you selected only the document for printing. You could also add a header or footer that had the citation information. Another option would be to use the text touchup tool and hold the ctrl key as you place the cursor. That will give you a text field that is part of the document that allows you to enter the information. That lists a few items that might meet your need.

Similar Messages

How to include one view into another view

Hi SDN's,
               Could any please tell me,How to include one view into another view.
In my requirment.I want to create a 'Z' view for an interface .In that view i have to take,
1) Ship-to-email adrr by
                          LIKP-KUNNR -> KNA1-ADRNR
                          KNA1-ADRNR -> ADR6-ADDRESNUMBER.
2) E-mail addr of person who created the document.i.e
    LIKP-ERNAM -> USR21-BNAME.
    USR21-ADDRESNUMBER -> ADR6-ADDRESNUMBER
    USR21-PERSNUMBER -> ADR6-PERSNUMBER.
   In both the case we have to pass ADDRESSNUMBER to ADR6 table.
If we pass these condition it fails,B'Coz at a time it passes Two ADDRESSNUMBER and a PERSNUMBER.
So i created two which fetches only the email addr of person who created the document.and another view fetches Ship-to-email addr.
Now i want to include the second view into first view . Is it possible?or please
tell me someother way to get these email addresses in a single view.

hi
as per my knowledge, nested views are not possible. However, while creating a new view, selection method will not giv u option to select the already created view(S) except the tables..i think so.
regards,
shamim

How to include a report into the SAP-SCRIPT

plz tell me
How to include a report into the SAP-SCRIPT
ASAP

creat a z report like this....................
REPORT zmmgl_picklist1.
TABLES : likp,ltap,ltak.
data : lv_NUM1 type c .
data : lv_NUM type c.
*&      Form get_data1
      text
     -->IN_DATA    text
     -->OUT_DATA   text
FORM get_data1 TABLES in_data STRUCTURE itcsy
                     out_data STRUCTURE itcsy.
READ TABLE in_data WITH KEY name = 'LTAP-VBELN'.
lv_NUM = lv_NUM1 + 1.
out_data-name = 'lv_NUM'.
out_data-value = lv_NUM .
APPEND out_data.
endform.
*&      Form get_data
      This form is to read details from LIKP    *
     -->IN_DATA    text
     -->OUT_DATA   text
FORM get_data TABLES in_data STRUCTURE itcsy
                     out_data STRUCTURE itcsy.
READ TABLE in_data WITH KEY name = 'LTAK-VBELN'.
Select single bldat from likp into likp-bldat where lgnum = ltap-lgnum.
out_data-name = 'LIKP-BLDAT'.
out_data-value = likp-bldat.
APPEND out_data.
   READ TABLE in_data WITH KEY name = 'LTAK-VBELN'.
Select single vstel from likp into likp-vstel where lgnum = ltak-lgnum .
out_data-name = 'LIKP-VSTEL'.
out_data-value = likp-vstel.
APPEND out_data.
READ TABLE in_data WITH KEY name = 'LTAK-VBELN'.
Select single kunnr from likp into likp-kunnr where lgnum = ltap-lgnum.
out_data-name = 'LIKP-KUNNR'.
out_data-value = likp-kunnr.
APPEND out_data.
ENDFORM.                    "get_data.
after this go to the script editor......
/: perform get_data in program zmmgl_picklist1.
/: using &ltap-vbeln&                 (Reference field.this field          should be there in both program and script.....)
/:changing &likp-bldat&
/:changing &likp-vstel&
/:changing &likp-kunnr&
\[removed by moderator\]
Regards
Anbu
Edited by: Jan Stallkamp on Jun 10, 2008 2:26 PM

How to include .js file into validater-rules.xml

iam doing project using struts.
i have .js file for client side validation.how to include .js file into struts validate-rules.xml so that i can use those validation in my project.
without writing any class.
is there any way

copy + paste from my book...............
Enabling Client-Side Validations
In addition to providing a framework for simplifying server-side form data validations, Validator provides an easy-to-use mechanism for performing client-side validations. Each validation routine defined in the validator-rules.xml file optionally specifies JavaScript code that can be run in the browser (client side) to perform the same validations that take place on the server side. When run on the client side, the validations will not allow the form to be submitted until they have all passed.
To enable client-side validation, you have to place the HTML Tag Library's javascript tag in each JSP for which you want validation performed, as shown here:
<html:javascript formName="logonForm"/>
The javascript tag requires that you use the formName attribute to specify the name of a <form> definition from the validation.xml file, as shown here, for which you want validations performed:
<form name="logonForm">
<field property="username" depends="required">
<arg0 key="prompt.username"/>
</field>
<field property="password" depends="required">
<arg0 key="prompt.password"/>
</field>
</form>
All the validations that you have specified for the <form> definition to run on the server side will be run on the client side.

ID CS5: How to include additional text into a table of contents and how to hide text from it?

I have the following problem:
1. I'd like to include additional Information in my table of contents which I don't want to appear in the text I refer to.
Example: I do have a picture with a caption saying:
picture 1: Blablabla.
And I want to have the source of the picture as additional information in the table of contents:
picture 1........Blablabla (source: thisandthat)........23
Still I don't want this additional content to disappear, as soon as I update the table of contents!
How can I achieve that?
2. And how can I have this the other way round?
Let's say I want the source in the caption, but not in the table of contents.
So the caption says:
picture1: Blablabla (source: thisandthat)
but the table of content says:
picture 1........Blablabla.....................23
I was trying to achieve this by two different praograph styles in the caption. One which would be listed, and one which wouldn't be listed, but this of course resulted in always having two paragraphs in the caption, which I'd like to avoid:
picture1: Blablabla
(source: thisandthat)
Any solution to this?
Best Regards,
Rainer Schwachsinn

Sorry, missed the second part of the question. I think the only way to do that is to use invisible "dummy" text of some sort, and if you're going to do it for some entries, you might as will do it for all.
One of the easiest ways is to put the text you want inthe TOC into an anchored frame attached to the actual heading in the text (so it moves along with it). Use a unique paragraph style for this text, and include this style, not the one applied to the headings inthe text, to make the TOC. I usually use a character color of red to make it satnd oout so I don't forget it's there, and the position on the page isn't really critical. Select the anchored frame, open the Attributes panel and make it non-printing. You'll see it in editing mode, the TOC will pick it up (as will variables, if required) but it will disappear on output.

How to write log information into SM37 batch job log

Hi,
I have a report running in batch mode, and I would like to log the start time and end time for some part of the code (different Function modules). I need to write this log information into the batch job log. Therefore I can check the time frame of my FMs.
After search the SDN, I can only get some information on how to write log into the application log displayed in SLG1, but that's not I want. I want to write batch log information, and check it in SM37.
If you have some solution or code to share, please. Thanks a lot.
Best Regards,
Ben

Hi Nitin
Thanks for the reply. Could you explain it with some code ?
I tried to use the write statement , but it did not wrok. I could not see the result in SM37.
write : "start of the FM1 processing".
FM1 code
write : "end of the FM1 processing".
but those two statement did not show in SM37..
1) how to use a information message ?
2) how to use NEW PAGE PRINT ON and PRINT OFF command. ?
I would appreciate if you can write some code ,that I can use directly.
Thanks a lot.
Best Regards,
Ben

How to include animation files into muse test site on business catalyst?

Hi there
I am trying to publish a site created in muse to the business catalyst test website service for a client to review
in the website i created an animation that i have inserted as an HTML snippet (ie copied relevant code into "INSERT HTML"
The question is how do include the folder with all the files required to run the animation when i click "PUBLISH" to business catalyst?
thanks

Hello,
You can make the changes in .muse file and then publish it to the existing site.
It will automatically detect your old site when you click on File>Publish ONLY if you are using the same Adobe Id to upload the site which you used earlier to upload.
You can check which Adobe Id you are using by going into Edit>Preferences option and under Publish with Account youwill find the Adobe Id which is being used to upload the site.
you can change the Id (if required) by clicking on the dropdown and click on Switch accounts.
Hope this helps.
Regards,
Sachin

How to include Change Request Title and Description in Approval email

Trying to figure out how to include the title and description of a Change Request in the email that goes to the managers when they approve it. Below is what we have now in the email template.
Change request $Context/Path[Relationship='CustomSystem_WorkItem_Activity_Library!System.WorkItemContainsActivity' SeedRole='Target' TypeConstraint='WorkItem!System.WorkItem']/Property[Type='WorkItem!System.WorkItem']/Id$: $Context/Path[Relationship='CustomSystem_WorkItem_Activity_Library!System.WorkItemContainsActivity'
SeedRole='Target' TypeConstraint='WorkItem!System.WorkItem']/Property[Type='WorkItem!System.WorkItem']/Title$, created by $Context/Path[Relationship='WorkItem!System.WorkItemCreatedByUser' TypeConstraint='System!System.User']$?$DisplayName$?, requires your
approval.
You can complete this request by replying to this message with [Approved] or [Rejected] in your message body (note the brackets).
Alternatively, you can complete the request by looking up Review Activity $Context/Property[Type='WorkItem!System.WorkItem']/Id$ under the Activity Management views in the Service Manager Console and manually approving or rejecting it there.
This basically translates to:
Change request CR#: Test Change Request, created by TestUser1, requires your approval.
You can complete this request by replying to this message with [Approved] or [Rejected] in your message body (note the brackets).
Alternatively, you can complete the request by looking up Review Activity RA# under the Activity Management views in the Service Manager Console and manually approving or rejecting it there.
When I click on Insert, there is a huge list of items and sub-items with all kinds of properties and I don't know what to select.
The Targeted Class of the template is Activity

$Context/Path[Relationship='CustomSystem_WorkItem_Activity_Library!System.WorkItemContainsActivity' SeedRole='Target'
TypeConstraint='WorkItem!System.WorkItem']/Property[Type='WorkItem!System.WorkItem']/Title$
This translates to the Title of the CR (given that the targeted activity is contained in a CR). Simply replace
Title with Description.
Also if the Change Manager can approve a CR just by the description you have bigger issues (or just putting everything in the description). What about a reason? Implementation
plan, rollback plan, testing, etc.?
http://codebeaver.blogspot.dk/

How to associate hardware information into an Oracle Table?

Hi,
I am new on Windows 2000 .
I am using the following script in order to get the windows 2000
hardware information.
I am using 8.1.7 version of ORACLE.
I am using a table "Server Hardware"(Server list,Network Adapter,RAM).
I would like to ask that how should or where should I use this script
in order to associate its information into my table "Server Hardware".
Could someone give me hints that how to use this script?
Thanks
Lee
Following script returns the name and version number of the operating
system installed on a computer
Script Code
strComputer = "."
Set objWMIService = GetObject("winmgmts:" _
& "{impersonationLevel=impersonate}!\\" & strComputer &
"\root\cimv2")
Set colOperatingSystems = objWMIService.ExecQuery _
("Select * from Win32_OperatingSystem")
For Each objOperatingSystem in colOperatingSystems
Wscript.Echo objOperatingSystem.Caption & " " &
objOperatingSystem.Version
Next

Actually, I am not using Recovery Catalog, so the views like RC_database, Rc_tablespaces etc , which are specific to recovery catalog are not available.
r.- this make sense at 100% because those views belong to the recovery catalog.
So, I wanted that these information, which we can get via using the commands like above, transfer into an Oracle table
r.- If you want to access the views of the Recovery Catalog to store part of that information in tables you have to have the database registered in a Recovery Catalog.
Should we keep the Recovery Catalog in Control file? Instead of using separate Schema.
r.- I recommend you to create a catalog for your database because the space the controlfile to store information regarding RMAN is reused and you can lose important information about your backups.
Can we run Catrman.sql script as a sys in order to keep the recovery catalog in sys schema?
r.- As you know, this is not recommended at all.
Conclusion : Create a Recovery Catalog and you will be able to perform all that you want regardind what you mentioned above.
I have a thread for this:
RMAN ( CATALOG CREATION ) STEP BY STEP by Joel Pérez
Joel Pérez
http://otn.oracle.com/experts

How to include BSEG ANLN1 into OBCY selection.

Hi,
I need to include BSEG ANLN1 into selection of summarise FI Tcode OBCY. Appreciate some advise. TQ

Hi,
I am not convinced whether we can do it. The field names are stored in table TTYPS-FI Summarization: Document Fields Allowed.
Take the help of technical consultant and see if you can maintain the table entries there.
Aravind

How to include applet jars into an JSF application

Hey guys,
I have a rather simple question. I have made a JAR that contains an applet. The applet runs fine, but when I include the applet into a JSF / JSP page I get a Class not found error.. The JAR containing the applet is included in the websites build path.
Can someone give me a hint where the JAR shoud go? Maybe a link to a tut would be nice

classpath wasnt set correctly

How to include text modules into text modules

Hi experts,
is there any possibility to include smartform text modules or sapscript standard texts into
a text module?
For example:
Text module "B" and "C" are supposed to be used in text module "A".
Regards
CHRIS

Hi,
thanks to all for your answers.
Obviously, there's no way to include a textmodule into a textmodule in SmartForms.
Regards from Germany
CHRIS

How to include local chains into meta chain

Hi Experts,
Could any one pl help me how to include 3 local chains in to a meta chain.
first i am creating local chains
Thanks in Advance
Nitya
Please check the forum before posting
Edited by: Vikram Srivastava on Sep 24, 2010 4:43 PM

Hi Nitya
Nothing much to explain about it but any ways
First create separate chains for all 3 local chains and create a meta chain include all this 3 in that
Meta Chain steps:
If the chains are dependents on each other then create as below
Start process -> local chain1>local chain2-->local chain3.
If the chains are independent loads then
Start process ---> local chain 1,2,3 place it in parllel.
Precaution: ensure that you local chains start process should place the maintain process radio button set to "Start using meta chain or API".
Please find the help link for the same : [Creating process chains and schedules|http://help.sap.com/saphelp_nw04s/helpdata/en/a4/1be541f321c717e10000000a155106/frameset.htm]
Hope its clear a little..!
Thanks
K M R
***Even if you have nothing, you can get anything.
But your attitude & approach should be positive..!****
>
H. Nitya wrote:
> Hi Experts,
>
>
> Could any one pl help me how to include 3 local chains in to a meta chain.
> first i am creating local chains
>
>
> Thanks in Advance
>
> Nitya

How to include limit switches into my control loop and how to access them through Labview

I'm developing a six degrees of freedom machine with servo motors,UMI flex6 and Labview-5.1.I was unable to access the limitswithes.So I would like to know the connections diagram,UMIflex6 board settings and the Vi's to be included in the program.please help me out in solving this problem.

Hi Kolakanuru,
Thanks for using our discussion forums. How you connect your limit switches depends on what type of motion board you are using. For example, if you look at the connection diagram for a PCI-7344, you can see that Forward Limit switches connect to pins 39, 45, 51, and 57. These will then pin out directly to the UMI. For the connection diagram for your particular motion control board, you can go to www.ni.com/manuals and pull up the necessary information. In regards to reading this in LabVIEW, the first thing you will want to check out is Measurement and Automation Explorer. In the interactive windows for your board, you can check the limit switch status there- Press your limit switch on and off and make sure that it changes the LED in MAX. Once that i
s all set, then you can go into LabVIEW and use the "Read Limit Status" VI which you can find in Functions>>All Functions>>NI Measurements>>Motion>>FlexMotion>>Motion I/O palette. Good luck with your application.
Regards
Dan
National Instruments

How to include z-fields into BAPI_GOODSMVT_CREATE

Hi,
In MIGO transaction, we have aded some fields on external tabs.
These fields are mandatory fields
The data of these fields will be stored in a Z-table when we save the MIGO.
We have used BADI s to do this. It is working fine.
Now, I want to post some data using MIGO tansaction. I want to use BAPI_GOODSMVT_CREATE to post tha data.
How can I include my newly added fields in this BAPI ?
Can u plz write the solutions?
Thanks

Hi,
Go through the FM documentation of BAPI_GOODSMVT_CREATE, this gives some information how to populate the custom fields.
Table parameter : EXTENSIONIN
And check the BADI: MB_BAPI_GOODSMVT_CREATE which is used to populate the custom fields for the material document.
I think you also require to implement this badi in your case.
You also need to extend the tables with the custom fields
With regards,
Dwarakanath.S

How to include citation information into document description

Similar Messages

Maybe you are looking for