How to increase Boot Camp partition without harming both Mac and Windows partition

Hello Apple Support Communities.
I have made a Boot Camp partition with my Mac partition, but the problem is that I am running out of space on my Windows partition. (Darn you, Steam Summer Sale! )
Anyways, is there any way to increase the space on my Windows partition without harming both Mac and Windows partitions. I would prefer if I didn't need to delete the Windows Partition and do everything all over again, as I need to download and set up everything all over again. I also know that changing the Windows partition is a tricky and hard thing, and one step can harm my whole computer, but I think that it is worth the risk.
I really don't care how to do it, anything, from a bootable program, to anything. I just want to know how to do it.
So is there any way that I can increase the Windows partition of my Mac without harming both Mac and Windows partitions? Thanks.

This cannot be done using Boot Camp Assistant. But, you can try using Paragon Camptune X for Mac® – How it works.

Similar Messages

I was partitioning my HD to allocate free space to give to my windows partition in Boot Camp. Now I cant access my windows partition at all. Please help.

I was partitioning my HD to allocate free space to give to my windows partition in Boot Camp. Now I cant access my windows partition at all. Please help

TTBOMK the only way you can increase the Windows partition is to repartition the drive back to a single partition
Then reinstall Mountain Lion
Restore all data from backup
Create new larger partition with Boot Camp
Install Windows
Restore data from backup
Allan

I have partitioned my time capsule, but I can't get it to work as a Time Machine back up and permanent media server for both mac and PC. What format do I need to partition the drive to so that it works for both mac and windows and so that it will be visab

I have partitioned my time capsule, as I want part of it to act as a media server for both mac and windows. However I don't know what format that I need to partition it to. I also can't make it a permanently accesible drive. I want to restore the drive to the original format (which I don't know) and start again and re-partition the drive in a format that can be used for media by both mac and PC and for time machine back-ups and make the media part of it permanetly accesible so I can add and acccess my files.
Thanks

You are mixing up a couple of things here.
The TC drive cannot be partitioned without removing it.. did you do that?
If you partition it you must use a Mac disk utility and use the HFS+ ie standard Mac format. And GUID partition table not windows type.
You can select erase disk in the airport utility.. that will take the disk back to original format. No partitions. TC is deliberately not partitioned as it is not a media server.. it is a backup device for TM. Over time .. the disk will be filled with TM backups so you have a long history of file changes to your computer.
There is no media server in the TC.. it is merely disk storage.. you can serve files from it to a media device.. but the TC itself is dumb as dumb.
Now the actual format of the drive is irrelevant to the PC.. The TC offers SMB file services to the network. You can copy files to and from the TC as if it was a local disk without caring one iota about the format. The TC handles that .. it is not a local disk .. it is a network drive.
Although you cannot partition the TC. you can still copy files to it.. this does have implications for TM.. but as long as there is plenty of free space should not be a major issue.
You can create a disk image via the disk utility in a Mac.. and as stated you can create partitions if you do it on a Mac with the disk directly connected which means breaking warranty if any exists on the TC.

How to burn a dvd with both Mac and Windows files

I have a DVD that has both Mac and Windows formatted files. When the DVD is mounted only Mac formatted files show. I want to burn a DVD copy containing both formatted files. How do I do that? Thanks in advance.

Correction! It is a CD and there are two partitions with Mac and Windows files.

How do I extract 1 page of a pdf file? How do I send that as a original for mac and windows users?

How do I extract 1 page of a pdf file? How do I send that as a original for mac and windows users?

This is not really a Numbers question. I will provide an answer but suggest you make the question relavent for the forum where you post.
1) Open the PDF in Preview
2) select the menu item "View > Thumbnails"
3) select the page you wnt to share
4) copy (by using the key combination <command> + c OR select the menu item "Edit > Copy"
5) select the menu item "File > New From Clipboard"
6) save as a new name
7) share the new file

How do I use an external hard drive on Mac and Windows?

How do I format an external HD for use on Mac and Windows? She has two laptops and have to use both.

format the external for Mac and use MacDrive or HFS+ for Windows on the windows side.
use the FAT32 format and live with the "4-GB-per-file" limit
format the drive NTFS and install e.g. the NTFS 3G driver on the Mac.

Boot Camp won't let me remove my windows partition, please help

I am trying to remove my windows partition and boot camp won't let me. It gives me a message +" The startup disk must be formatted as a single Mac OS Extended (Journaled) volume or already partitioned by Boot Camp Assistant for installing Windows."+ Please help!!!!!

Use the Disk Utility to delete it and resize the partition immediately above of it so it takes up the released space.
(51550)

When I boot holding option, both Mac and Bootcamp partitions show up, but disappear after 2 seconds.

I recently swapped out my HDD for an SSD in my 2007 MBP. Hardware installed fine. I installed Mountain Lion from a time machine backup (of the same machine). I made the Windows partition in OSX, then installed Windows 7 on the partition it had made. In Windows, I updated Bootcamp to 3.3.
Everything seems to work fine in both OSX and Bootcamp from what I can tell. The problem is, when I boot and hold option to choose my boot drive, both drives appear and then disappear in about 2 seconds. They disappear with a "poof" animation, as if you had dragged an app off of the dock. If I'm fast enough, I can choose the boot drive before it disappears.
I tried once again reinstalling OSX from my last time machine backup (prior to the SSD swap), and the problem persists.
I thought it might have something to do with NTFS 3G and MacFuse, because I'd heard that they cause a bug where the bootcamp partition won't show up under the "startup disk" preferences pane. When I uninstalled said programs, bootcamp showed up under there startup disk options, but the problem persists.
Any ideas?

Actually, this is just getting weirder.
Disregard my edit above. Clicking once doesn't have any effect on the drives. But the drives disappear only coming off of a RESTART from OSX. If I Shut down fully, the problem is solved. Likewise, if the drives have disappeared after a restart and I am forced to turn off the computer by pressing the power button, upon boot up the drives no longer disappear (Regardless of any action I take).
It would seem that the drives are disappearing due to something during the restart process.
Okay: Here are some workflows that might shed light on the situation:
Boot to Mac -> Shut down -> Alt boot : DOES NOT DISAPPEAR
Boot to Mac -> Restart -> Alt boot: DISAPPEARS
Boot to Mac -> Shut Down -> Alt boot -> Boot to Windows -> Shutdown or restart -> Alt boot : DOES NOT DISAPPEAR
Boot to Mac -> Restart -> Alt boot & fast select -> Boot to Windows -> Shutdown or restart -> Alt boot: DISAPPEARS
Boot to Mac -> Restart -> Alt boot & disappears -> Turn power off -> alt boot: DOES NOT DISAPPEAR
So the core culprit is something to do with OSX restart. The method of shutdown during windows doesn't seem to matter.

How to properly configure a home network using both Mac and PC computers

Is there a book or set of guidelines that can tell me how to properly configure (exact specifications) my computers in a home network? Here is what I am trying to do and using:
1) Three computers: iMac (late 06 ver), Macbook (newest version), Dell laptop. The two Macs are using Leopard and the PC is XP.
2) Bellsouth modem which feeds into the Airport Extreme Base Station (AEBS)
3) The AEBS has a USB hub which is connected to a external hard drive and two inkjet printers. A third laser printer/scanner/fax machine is connected to the AEBS via ethernet.
4) All three computers use a wireless connection to the AEBS.
I would like the following:
1) Have a secured and password driven network - don't want outsiders connecting to the nework without permission.
2) All computers to be able to access the USB printers and ext HD.
3) The two Macs to read/write to each other with password access
4) The iMac to have read/write capabalities over the PC via VSFusion or Bootcamp if possible.
Currently, all three have Internet access via the AEBS and can print on the ethernet printer. Both Macs can see the Bonjour USB printers and print (however they to do not display on the AEBS configuration display utility and neither does the ext HD). The USB ext HD is shown on the iMac desktop and I have access to it, but does not display on the MacBook. I have not checked if the PC sees the external HD and it really does not matter if it ever does, although it would be nice.
I am hoping that there is some standard configuration that I can "cut and paste" that is generally used to allow a home network to share resources while still being secure.
Any advice and help is greatly appreciated.
Thanks,
Andrew

Andrew,
What you would like is fairly complicated so this will probably be a lengthy post, but hopefully I can assist you.
As others here have pointed out, networks can vary widely, but the best networks have one element in common: planning. The first thing you need to think about is how you would like all of these systems to cooperate. For instance, do you want one of the machines to serve files to the others and be a central repository, or are you just interested in having them share documents on occasion so that you don't have to carry around, say, a USB key all the time? That said, here is a basic list of things I think you should look into.
1. Network Basics
First step is to get your local network set up. I'd go for WPA or WPA2 wireless security as they are relatively strong standards and you can use human-readable passwords. Additionally, unless you have an explicit need for someone outside your network to initialize a connection (Windows' RDP for instance), do not allow any passthroughs or port redirects on your AEBS.
2. Network Topology
Decide how you want computers and networked devices to identify themselves and their relative locations in the network: in short, do you want static ip's or dynamic ip's? Most of the time, static IP's can be assigned on a DHCP router, the trick is to assign the statics higher than your number of devices (or lower on some routers - for instance Linksys routers start DHCP at 192.168.1.100 but you could have statics from 192.168.1.2 to 192.168.1.99). For instance, it is impractical to set a laptop to static because I'm often in coffee shoppes and other environments that assign via DHCP; on the other hand, it's a good idea to have a printer be static so that you always know where to find it. So, I have 10.0.1.x network (default on AEBS), and the printer is 10.0.1.24, since the likelihood of my encountering an IP conflict with 4 computers on the subnet is virtually zero. If you configure a static device behind your AEBS, defaults are usually
Default Gateway 10.0.1.1
IP Address 10.0.1.(your choice)
Subnet Mask 255.255.255.0
3. File-sharing.
3a) Mac OS X has a built-in SMB/CIFS (Windows file & printer sharing protocol) client, and a basic SMB [samba] server can be enabled in the sharing preference panel (enable file and/or printer sharing). Windows XP can use these shares, but must authenticate. For that reason, you may not be able to see your shares in the Network Places browser, however you should be able to get to them by mapping the network drive (tools menu) or executing RUN with \\computer.name\share.name. You will then be able to type in your credentials. I would also suggest relatively simple names for the Macs in question (set in Sharing preference pane). Typing Andrew's-iMac-G4 in every time you want to find it will get irritating after a while to say the least, especially if you need to troubleshoot.
3b) The reverse works similarly. You can Connect to Server... from Finder to get to the Windows shares. To do this you must have Windows File and Printer sharing enabled (most easily through the Network Setup Wizard in Control Panels - Use Classic View). It's really easy if your account names and passwords are identical on the Mac and PC, because when loading user profiles, the Mac will generally automatically try to authenticate against the Windows machine with your Mac logon credentials. (Windows seems to do this against the Mac as well) You can write an Applescript or there are some PLIST modifications you can make to mount Windows shares at login.
4. Printing
I'm not exactly sure what you had in mind here since I'm not sure what's connected to which computer or directly to the network. If it is possible, I personally find putting my printers directly on the network to be the easiest thing. Especially if printing large PDF or graphics files, the spooling on the host system can really slow the computer down, and slow down printing. For example, I used to have a laserjet on a Windows box and had to print a very large file. Going through a Win print server, it only printed a page every 30 seconds, but when I got a jetdirect adapter, the whole thing was done in under two minutes. If you have HP Printers, I would recommend the jetdirect print servers (I have used with both a laserjet and a supposedly unsupported color inkjet).

My IMac version 10.6.8 with Intel core duo beeps and turns off unexpectedly in both Mac and Windows mode. How do I fix this?

My IMac turns off unexpectedly in both Mac & Windows mode. I've repaired disc and permissions using the Snow Leopard install disk and cleared the cache without help. Any ideas how to prevent this?

The HAT test detected no problems. Perhaps one of the peripherals, e.g., the backup disk, is causing the problem. I'll try to run the MAC without peripherals for a few days and see what happens, unless you have other suggestions.
Thanks

How to Best Create a DVD that will play on BOTH Mac and Windows

Hello - Looking for some direction. How can I create an iDVD DVD that will play on both Mac & Win? I can not find a solution that will accomplish this. What I did was create an .img then burned to DVD. This plays fine on my Mac & on home stereo DVD but not on a windows machine. The Windows machine can "read" the DVD fine but WIndows Media Player can not play it. Do I need to have folks use a special player on WIndows? Is there another format the I should have iDVD output? I need to send some DVDs to college coaches for my son and am trying to do this the best way without knowing what platform (Mac or WIn) they will be using. What is the best approach?
Thanks in advance for your help,
David

Hi
There are two ways to burn a DVD.
• as a Data-DVD (eg including a video.img file or any data)
• as a Video-DVD
A. Data DVD is what You creat by just popping in a DVD disk and OK to format it.
B. Video-DVD - You make from within iDVD and insert thed DVD WHEN iDVD asks for it
(OR - Via Disk Util tool - Still introduced when asked to do it !)
(or via Roxio Toast™ - STILL not inserted until asked to do this)
So what You've done is a Data-DVD with Your movie as an .img file on it.
• Can only be playbacked on Your Mac
Open "Disk Util tool"
Then on Dasktop - Double click the .img file so that it creates a fake DVD disk
Then in "Disk Util tool" - select it and click the Burn (Nuclear) button
THEN insert a new DVD WHEN asked to do this.
NOW ! ! Select a lower Burn Speed eg 4xDVD - This will result in a DVD with few burn errors and
a PC will read it easier !
Use of quality DVD brand is also important - I use Verbatim
I use DVD-R
Good Luck - Bengt W

2 Partitions needed in Tiger: Mac and Windows

I just bought my nephew a verbatim 320G external hard drive for the iBook G3 laptop that I gave him (the internal drive is way too small). He has Mac programs that we bought for him and he needed a bigger hard drive to install them on.
Now he tells me that he'd like to also use part of the Verbatim hard drive to back up his Windows laptop that's using Vista.
How can I partition this Verbatim drive to have a Mac partition AND a Windows Vista Partition both on the same hard drive in Tiger? Can it be done, and how?

Yes it can, In Disk Utility just Partition it then make one Mac OS Extended, the other MS-DOS.
One option is MacDrive for you PCs... allows them to Read/Write HFS+...
http://www.mediafour.com/products/macdrive/
More options...
NTFS-3G Stable Read/Write Driver...
http://www.ntfs-3g.org/
MacFUSE: Full Read-Write NTFS for Mac OS X, Among Others...
http://www.osnews.com/story/16930

How can I access a Photoshop Elements catalog on an external hard disc from both: Mac and Windows PC

How can the directories and path be named, that catalog can access the same picture files.

TZachmann wrote:
How can the directories and path be named, that catalog can access the same picture files.
That means you should have both your files and your catalog on the external drive, and you plug in your external drive alternatively to one or the other computer.
Are your picture files already on the external drive ? If they are, you only need to copy the catalog folder to the external drive, as explained later,
otherwise, simply do a backup/restore to the external drive, with the choice to restore on custom location.
http://helpx.adobe.com/photoshop-elements/kb/backup-restore-move-catalog-photoshop.html
(moving to the external drive is similar to moving to another computer)
Moving the catalog :
First locate where your catalog folder is situated : menu help / system info.
Copy the whole folder to the external drive.
In the copied catalog, double click the catalog.pse12db file, that will open the organizer and the new catalog. It will appear in the 'custom location' section in the catalog manager.
Backup and restore solution : restore on 'custom location', that is to a new master folder created on the external drive.
The first time you are using the catalog on either computer, you'll have to use the catalog manager (file / catalog...) to browse to the external drive location of the catalog. After that, the location will be remembered in each computer.

Can you partition an external hard drive to run both mac and windows files

I have an external hard drive fomated for windows NTFS. I am unable to Write mac files to this drive. I need to be able to share the files
between both platforms. Any suggestions? Thanks

Format it as MS-DOS from a Mac or exFAT from a PC, or install Mac OS X software which allows it to write to NTFS drives, or hook it up to a PC and make it available as a network share.
(78564)

How to set up HP PSC 2410 printer for mac and windows

The printer currently works with the MAC but we have a new PC in the house and would like the printer to service both computers. Can the printer be set up to work with either one wireless?

Hi,
Please watch this video:
www.youtube.com/watch?v=g7v5VGO6SAg
Finding driver for your printer could be a problem specially for Windows 7. With current prices of printers, I would go out to buy a new printer and save my time to do other work.
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How to increase Boot Camp partition without harming both Mac and Windows partition

Similar Messages

Maybe you are looking for