How to increase no. of decimal places in a cube

Dear Friends
Can you tell me
how to increase no. of decimal places in a cube
i want 5.98765 this value in the keyfigure
but it is allowing me only 5.987 only 3 digits after decimal
urgent
Thx

Hi Laxmi,
Inorder to store data with more than 3 decimal places,you can check the keyfigure with maximum precision checkbox available in the additional properties tab of the keyfigure.By which you can store upto 9 decimal places.
Or
You can change the data type from DEC to FLTP,by which you can store data upto 15 decimal places in the cube.
Also by changing decimal places in Bex allows you to change the decimal places for the data to be displayed and if the data in the cube is holding 3 decimal places how can you display 5 decimal places in report.
Hope it helps....
Regards,
Umesh.

Similar Messages

How do you increase or decrease decimal places

Does anyone know how to increase or decrease the number of decimal places in Numbers?

select the cell(s) then use the cell formatter to adjust the displayed number of digits. To open the formatter click the "Format" button in the top right corner.
Here is a number where the formatting is automatic:
Here is requested 2 significant digits:

How to validate for 2 decimal places

How can I put a check while inserting into a number(5,2) field that user has entered only 2 decimal places. Right now if the user inserts records like 23.5456 it gets inserted as 23.56 . I want these type of records to error out. Is there an easy way to do this kind of a validation while inserting.?
Thank You,
SK

Sorry, I don't see how you're going to accomplish this. The value has already been implicitly rounded before check constraints or triggers fire. I guess if they were inserting true literals you could check the SQL statement itself and it's possible to get at bind variable values but that's going to be a real nightmare to implement properly. I think you're going to have to have the column as a number with no scale and check constrain it if this is really required. You could probably do this with a view and instead of triggers but that's going to be ugly.

VB: How do i format two decimal places?

I'm using VB in Visual Studio 2013.
The professor wants the answers from the textboxes to be displayed with dwo decimal places.
all he gave us was the following syntax:
format (#,#.00)
however i have no idea how to get this to work as i tried to figure it out on my own and nothing. i would like it to be displayed with the dollar symbol if possible with the comma separators when needed.
i tried declaring a variable as a string and a double but i kept coming to a dead end. help please. this is the last thing i need to turn this in tomorrow.

Hi guys,
I don't know how long is your forum experience.
But there is a long time etiquette in the forums, which stands from the first day of newsgroups not to help people with code for homework.
Do you real think I could not do that?
Now it took me more time, but probably a wast because your replies.
Success
Cor
Success
Cor

How to get the exact decimal places displayed while exporting to Excel?

Hi All,
I have a requirement to display the exact decimal place values in my report. In my pivot table, i duplicated a column named order number and converted to percentage by applying these conditions Show Data As-> Percent Of-> Column. I got a resultant column with one decimal point. As i needed two decimal points i took the xml of the report and changed the minDigits='2' and maxDigits='2' values like this. After that i got the accurate answer. But when i export it as excel sheet it is not showing the % column properly. The values after 0 is not getting displayed. Any solution for this?
Thanks in Advance
Thenmozhi

Hi Thenmozi,
You can try adding the below statement in the Custom CSS section of the your column properties.
mso-number-format:"\@"
Edit your report--> Criteria-->which column you want to display in excel click column properties --> select CCS--> Paste here above code.
Second way:
Edit your report --> criteria-->click fx option for your column and apply the below code.
2. '<span style="display:none">&nbsp</span>' || CAST(your column name AS CHAR)
Award points it is useful.
Thank,
Satya

GUI download, how to retain format of decimal places

Hi everyone!
I have a program that downloads data to excel file using GUI Download. The values of the amount in the ALV display are 11.90, 11.90- which is correct because it has two decimal places. But the problem now occurs in the excel file. The values are now 11.9, 11.9-.
Do you know of any method that will retain the format of the values when it is already in the excel file.
The format of my decimal notation is 1,234,567.89.
Thanks in advance.

Thank you!
But I need to have the format of the numbers in the excel the same as the format in the ALV <b>without changing the format of the cells in the excel file</b>. It has to be changed in the program.
Actually there are also amounts that are being displayed in excel file with 2 decimal places the same as the ALV display. But some of the amounts were changed when it comes to the excel file, and I don't know why this happens.
Thanks.
Message was edited by:
Betsie Camoro

Increase XL Reporter's Decimal Places to more than 2

Hi All,
Can anyone advise on how to increase the default decimal places in XL reporter to be more than 2?
The figures i retrieved from SAP Financial Template for the stock account is 1234567.81 but XL report shows it as 1234566.76.
Does showing a differences of 0.05 value.
I did a sum for the stock account from JDT1 using query. it is also showing me 1234567.81.
So, I am assuming that XL reporter is using 2 decimal places by default.
Please help my balance sheet is not balance.
Regards
Jessie

I found that there is a SAP Note written to increase the decimal in SAP XL Reporter.
See SAP Note 896207.

I need to get 2 decimal places when using a formula for a quotient and Numbers will only give me whole integers which is useless since most items will be less than 1. How can I change this?

How do I get 2 decimal places when using a formula for a quotient? It only gives me whole integers. Most of the results will be less than 1 so I need 2 decimal places

the quotient function returns only whole number portion of the dividing two numbers. If you want the actual decimal value use the divide operator. you enter this as:
A/B
if the numerator is in A1 and the denominator is in B1 you can enter the formula like this:
=A1/B1

How to get 2 decimal place of an amount?!

Hi. How to get only 2 decimal place of the said amount?!
I use to_char(v_rec.amount, '999,999,999.99') however it is outputting more than 2 decimal place. Thanks!!
1,048.7800205
Edited by: 989873 on Feb 26, 2013 6:33 PM

989873 wrote:
Hi. How to get only 2 decimal place of the said amount?!
I use to_char(v_rec.amount, '999,999,999.99') however it is outputting more than 2 decimal place. Thanks!!
1,048.7800205above should NOT contain any comma
it works OK for me.
How can we reproduce what you report?
1* select to_char(1048.7800205, '999,999,999.99') from dual
SQL> /
TO_CHAR(1048.78
1,048.78

Error message when updating decimal places in general settings

Hello together,
I got a big problem with the settings of decimal places.
I know that I am only be able to incerase these but it's a virgin database for a customer with no data imported.
Everytime I want to increase the prices decimal places I get the following error message:
"cannot update while another user is connected to the company"
But I checked all sessions connected to this database. I am the only person that is logged in.
I closed the db more that one time but it doesn't work.
Can you help me please?

Hello Meike,
I have had this problem a while ago and it was caused by the RPD-connection i had made with the customer server.
I had to change the values directly on the client machine.
Hope this also your solution.
Kind regards.

General Settings Decimal Places

Good Day
Experts:
I have a request to make the Decimal places, for my Quantity and Price columns in a Matrix on one of our custom screens, have the same number of places as the list in General Settings\Display Tab.
For example, Prices has a setting of 4 Decimal Places. How can I specify 4 Decimal Places in my datasource:
MatlReqForm.DataSources.UserDataSources.Add("U_EaCost", SAPbouiCOM.BoDataType.dt_PRICE)
Is there some kind of option with this command that enables specifying the decimal places?
Is there a way to dynamically check where the value on the General Settings\Display Tab is set at
and have the datasource take on that value when assigning it to a field?
Please ask clarification questions if my exlpanation of needs if not clear enough...
Thanks for the hlep,
Ed

Hi Ed,
What version is this client running? It sounds like a bug. UserDataSources are automatically linked to the General Settings. If you set a datasource to the Price type then it should automatically show with the same number of decimal places as the Prices setting in General Settings. There is no way to set the number of decimal places on a datasource directly. I have tested this on a 2007A system and it works fine.
Kind Regards,
Owen

No of Decimal Places in Write Back

Hi All,
We are using ERPi/FDMEE writeback option to write data back to Oracle EBS12. Everything is working correctly, but while extracting data from Hyperion FDMEE is taking data in 7-8 decimal places. Is there any way to round this to 2 decimal places while exporting data ?

Hi Laxmi,
Inorder to store data with more than 3 decimal places,you can check the keyfigure with maximum precision checkbox available in the additional properties tab of the keyfigure.By which you can store upto 9 decimal places.
Or
You can change the data type from DEC to FLTP,by which you can store data upto 15 decimal places in the cube.
Also by changing decimal places in Bex allows you to change the decimal places for the data to be displayed and if the data in the cube is holding 3 decimal places how can you display 5 decimal places in report.
Hope it helps....
Regards,
Umesh.

Decimal place truncuation!!

hi i have a field in XI called net_price how should i change the decimal place value of that field to more than 2 decimal places
say 4 ,now it is truncuating to two decimal places.
thanks
Edited by: Capricorn!! on Aug 27, 2009 6:14 AM

Hi Somenath,
Are you sure that all the data in cube is affected? I mean also the data loaded in cube before GUI upgrade?
I have a feeling that instead of GUI upgrade something happened to the background user that is extracting the data in source system. E.g. this user master data has changed - in decimal format.
So check the user and check data loaded before/after change of GUI.
BR
m./

Decimal Place changes in Service Netry Sheet

Dear Gurus,
I have a problem , in standard SAP for Service entry sheet allowed decimal place is 3 (0,875) , but I want to change it as 4 decimal places (0.8745) . Is it possible by any modification ? If so , please brief me .
Thanks in advance
With Regards
Soumen

Dear Anand,
IOY04 is used for change the decimal place in currency. But I want to change the decimal place for quantiry which may be increased from 3 decimal places to 5 decimal places.
Regards
Soumen

Removing the decimal places of currency field

Hi Gurus,
I have a currency type field ( to be more specific a field like BSEG-WRBTR) .
How do i eliminate the decimal places for this field.
ie if the value is 345678.91, i need to make it 345678.
Is there a standard keyword or something for this?
Points will be given to all the helpful answers.
Thanks,
Nobin.

You can use the FLOOR function to get the largest integer value without decimal.
Like:
DATA: W_RESULT TYPE I.
W_RESULT = FLOOR( P_AMT ).
Regards,
Naimesh Patel

How to increase no. of decimal places in a cube

Similar Messages

Maybe you are looking for