How to increase timeouts for Async messages? Which parameter ti increase?

Hi guys,
can you please provide a parameter name which needs to be increased so long taking message processing of asynchronous scenarios which contain lots of data would not fail because of the timeout?
Thank you for your help, Andrzej

Hello,
you can modify the time out parameter. refer sap note 856597
Regards
Monica

Similar Messages

How to create variant for selection screen which is in subscreen

Hi,
How to create variant for selection screen which is in subscreen in a module pool program?
it is very urgent.
Thanks in advance.

Hi,
You can create the 'Parameter Transaction' so that whenever you run the particular transaction it will run with the initial value given when the Tcode was created and hence you can skip the initial screen of the module pool program.
To create Parameter transaction from SE93 you have to choose the last option i.e Parameter Transaction.
Regards
Sudheer

How can i recover old sms messages which were deleted about a week ago?

How can I recover older sms messages which were deleted about a week ago? I have tried some software but it only recovers messages from the date deleted not prior.

You Can't
sorry Once Deleted
forever Deleted

How to add timeout for threads which are running using ThreadPoolExecutor

I am trying change my existing functionality with ThreadPoolExecutor. I was unable to achieve fully.
Here is my issue.
I was creating multiple threads for independent DB update operations. And was calling join with time value on the each thread, for any reason if the db update hangs so that thread should die.
Now am trying use a nice ThreadPoolExecutor so that it can run and queue the threads nicely. But how do I create the timeout values for the threads which are in the ThreadPool. For any reason if the thread hangs then timeout will take care of killing the thread. When we use execute method submit the runnable task its not guaranteed that thread will run immediately. So when the executor will execute the submitted task is not know.
Probably I might be wrong some where.
Thanks.

Future task = threadPoolExecutor.submit(...);
//this will block until it finishes or times out.
task.get(REQUEST_TIMEOUT, TimeUnit.MILLISECONDS);

How set diff. timeouts for entity beans?

How do i set diff. timeouts for diff. entity beans? Is it in the ejb-jar.xml file? Is this refreshed every time it is accesses?

Hi there,
Although not familiar with all of the App servers on the market, I'd say that you are unlikely to find a timeout value for Entity Beans. Passivation of Entity beans is normally a function of the commit options supported by a specific App server. For example, with Commit Option C an entity bean instance should always be returned to the instance pool after a transaction has completed. You can find details of the various commit options in the EJB specification which you can view or download from:
http://java.sun.com/products/ejb/docs.html
Hope this helps
Amanda
Developer Technical Support
Sun Microsystems
http://www.sun.com/developers

How to display Help for the message in our program

Hi Experts,
Do any one know how to display the HELP for the Message in our ABAP program? Just like the user click the Long Text button in SE91.Do we have any function modules or Class method to do that? Thanks in advance.
Joe

Hi Joe,
While creating a message class in se93, theres a button (documentation) on the application tool bar. Click on that and you will be lead to a text editor where you can fill in the necessary documentation for the message you have created.

How to Send Emails for failed messages without using Alert

Hi Experts,
In our project, we need to trigger Emails for the failed messages in SXMB_MONI / Adapter Engine without using Alert Framewrok.
Please let me know the below :
1. Is this really possible to avoid Alert?
2. If possible, then can we accomplish this by creating any PI Scenario? Please provide me some knowledge.
3. Can we do it by writing any ABAP Code? If ABAP report can make it, then please provide me the code/ tables which will be needed. If any Blog/ Wiki is there, then please let me know the URLs.
Thanks,
Nabendu.

Hi Nabendu,
If your customer asks for mails with specific text for message failure, tell that it is not possible. Because Message will go through several engines like Adapter Engine, Integration Engine, BPE. You can not generate mails for the message failures in all these areas with out standard alert mechanism. These are pure technical alerts which only PI people can understand, not business alerts.
Example: assume your sender channel is unable to connect FTP Server, in this case you can not generate even though you will develop adapter module to generate alerts.
So for message validation only you can send mails not for message failures.
thanks,
madhu

How to make changes for a dc which is existing

Hi
i have a requirement one of my clients location some developers are developing a DC and left it .
Now i have to make the changes of that DC from my location .
How to do these changes for a dc which is located in the client location from my location .
Please explain me in steps.
Thanks in advance.

hi
[Learn sap online|http://learnsaponlin.blogspot.com]

How Display Standard Help for a Message?

I have a program that executes a Call Transaction. When it returns an error message, I write the message to a report.
I would like to define a hotspot on the report so that the user can click on the message and get the standard long text for the message. This would be equivalent to the result you get when you click on a message at the bottom of a screen.
Is there a standard function module that would provide this feature?

Check This FM DOCU_CALL
Regards,
Naimesh Patel

How to create entity for the table which is not having the primary key

Hi,
Is it possible to create an entity for the table which is not having the primary key.
I have to write a method in my session bean and that method must use this entity.
any websites for this.

If you are talking about processes launched from a JVM (running outside), Process is available.
If you are talking about processes already running outside of a JVM, you could roll-your-own class to provide similar functionality as Process. This approach would be platform dependent, backed by the platform's I/O scripting and therefore limited to what the platform supports for process manipulation, e.g. Linux/Unix capabilities far exceed Windows.

How to get MessageSecurityConstants for a message

Hi,
I need to get the MessageSecurityConstants for a message (mail, appointment, etc...).
I looked at the Object API document and could not find a way to get it.
Please let me know a way.
I am using GroupWise 8.
Thanks,
Hilmi.

There is not in the ObjectAPI. You would have to use the
SOAP API.
>>> On Friday, October 16, 2009 at 7:46 AM,
hilmij<[email protected]>
wrote:
> Hi,
> I need to get the MessageSecurityConstants for a message (mail,
> appointment, etc...).
>
> I looked at the Object API document and could not find a way to get
> it.
>
> Please let me know a way.
>
> I am using GroupWise 8.
>
> Thanks,
> Hilmi.

How to write programs for selfdeveloped message based instruments?

I developed a message based interface by myself, but I have no experience of developing instrument drivers with Labwindow/CVI. I want to know which commands will be sent to the instruments when power up? It's very strange that when I plug in my instrument, the light of Access of resource mamager keep on lighted and the HP-VISA Assistant can't recoganize all the instruments in the mainfram. I want to know how to let my instrument be recoganized by system. Thank you very much!

What is the VXI controller for your system? What VXI driver is running on the system? You mention HP-VISA, is your VXI controller and driver from HP or Agilent? If so, you will need to contact them on how to get your instrument recognized and working in the system.
To write your instrument driver, I would recommend using VISA commands. Message based instruments have sets of specific commands that they respond to. Generally, one would have to look in the documentation for that instrument to determine the instruments commands.

How to provide hyperlink for CSN message in email notification

Hi,
I have the following requirement, could anyone provide some ideas/solution on this.
We integrated Change Notification Service to portal as transaction iView. once the CSN is raised and assigned to resopnsible person, the message will be notified through email. The requirement is in the email notification a hyperlink should be provided so that on clicking on the link it should open the page with respective CSN message.
Could any one provide solution how to achieve this?
Thanks in advance.
Regards,
Ravi.

Yes you can do that. using the fieldcatalog there is an option for that. give HOT_SPOT = 'X'. for the column you want.
wa_field-hotspot = 'X'.
REPORT ztest_alv.
TYPE-POOLS:slis.
DATA:it_fieldcat TYPE slis_t_fieldcat_alv,
     wa_field LIKE LINE OF it_fieldcat.
DATA: BEGIN OF it_likp OCCURS 0,
       vbeln TYPE likp-vbeln,
      END OF it_likp.
DATA: layout TYPE slis_layout_alv.
wa_field-fieldname = 'VBELN'.
wa_field-tabname = 'IT_LIKP'.
wa_field-hotspot = 'X'.
wa_field-outputlen = 10.
wa_field-no_zero = 'X'.
wa_field-seltext_l = 'Sales'.
APPEND wa_field TO it_fieldcat.
SELECT vbeln FROM likp
UP TO 10 ROWS
INTO TABLE it_likp.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
    i_callback_program      = sy-repid
    is_layout               = layout
    i_callback_user_command = 'USER_COMMAND'
    it_fieldcat             = it_fieldcat
TABLES
    t_outtab                = it_likp
EXCEPTIONS
    program_error           = 1.
*&      Form user_Command
*       text
*      -->UCOMM      text
*      -->SELFIELD   text
FORM user_command USING ucomm TYPE sy-ucomm
                    selfield TYPE slis_selfield.
CASE ucomm.
    WHEN '&IC1'.
      SET PARAMETER ID 'VL' FIELD selfield-value.
      CALL TRANSACTION 'VL02N' AND SKIP FIRST SCREEN.
ENDCASE.
ENDFORM.                    "user_Command

How to make EOIO for proxy messages in PI

Hi Experts,
We got different proxy outbound messages from ERP, we need to process all the messages in a sequence as it was sent from ERP, how can we make one queue in PI for all these messages.
Please give me some thoughts for this issue.

Refer to these blogs:
XI: Reliable Messaging u2013 EOIO in ABAP Proxies
/people/arulraja.ma/blog/2006/08/18/xi-reliable-messaging-150-eoio-in-abap-proxies
ABAP PROXY TO FILE u2013 Handling Heavy Volumes in SAP PI
/people/praveen.gujjeti/blog/2010/05/31/abap-proxy-to-file-150-handling-heavy-volumes-in-sap-pi
Regards
Raj

How to configure EOIO for async RFC ----- SOAP scenario

Hello Experts,
I have Async. RFC----->SAOP secnario. Problem is that when the target system is down the PI system do not recoginze it and send the message successfully to target system, where the target system is down and do not show those transaction in it.
I got the impression that , I have to make the QoS as EOIO and set up the queues in the PI.
So, I checked both the comm channel RFC Sender and SOAP recevier but i was not able to find the option where we can make the QoS to EOIO.
Do we need to mention the QoS in the SOAP URL in SOAP recevier comm channel . if yes please anyone can give me an example of that.
Or do we have other option in PI to identify that target system is down and we can queue up the msgs in PI.
I would appreciate your responses.
Thanks.

Problem is that when the target system is down the PI system do not recoginze it and send the message successfully to
target system, where the target system is down and do not show those transaction in it
No need to change the Qos in order to know the status of the target system.
Just configure alert for Adapter Engine...when the SOAP channel tries to send the message and if the target system is down and alert will be generated (Connection Exception: Connection refused).
This will indicate that the Target system is down....now it dpends on your business on what to do in such a case....to cancel the message or to restart it (from XI/ PI)
Making QoS as EOIO will cause the entire queue to get blocked...and hence the following messages will also get blocked and wont be delivered even if the target system is up and running.
Regards,
Abhishek.

How to increase timeouts for Async messages? Which parameter ti increase?

Similar Messages

Maybe you are looking for