How to install a via wifi TC in an existing netgear N WiFi network?

It has been explained as possible but I believe this is not that easy, even for apple, to create/install

It is not recommended.. so the option is not visible unless you hold the options key when you select wireless mode.. if you hold options, it will have Join a wireless network.. fill in the details. Wireless Name.. ie SSID in everyone but Apple Speak. And the password for wireless.
You will now have dropped the speed to the TC by half its already low speed at 2.4ghz.
MUCH BETTER METHOD
Plug the TC into the netgear with ethernet..
Bridge the TC..
You can then either..
1. Turn off the wireless and just use the existing netgear wireless network.
2. Leave the wireless on using different SSID and connect to the TC rather than the Netgear.. watch auto channel setup.. much better to do this manually.. but it might add 5ghz for you if the Netgear doesn't cover that band.
3. Set up wireless roaming where you use identical SSID and security to the existing Netgear.. but lock to different channel.
This is much more useful if the TC is located far away from the netgear to actually give you a better wireless coverage.

Similar Messages

How to install Small Business Server 2008 in an existing Active Directory domain

It is shown on this page:
http://support.microsoft.com/kb/884453, "How to install Small Business Server 2003 in an existing Active Directory domain".
Is it possible to do this with SBS2008 ?
If "YES", are there any published information about the procedure ?

Yes, it is. Thank you very much.
But there is something that confuses me - I want to migrate from Win2003Std to SBS2008. And also, I want to keep the existing Win2003Std as a second DC for a long time.
But it is written in the shown article:
... After the migration is finished, you must remove the Source Server from the network within 21 days. ...
Is this rule mandatory for the scenarios where the Source Server is Std, not SBS ? As I know, I can have more than one DC(Win2003Std/Win2008Std) together with SBS2003. But what about SBS2008 ?

How to install the Oracle Apps R12 with an existing OAS 10g

Hi All,
I am planning to install the Oracle Apps R12 and I already downloaded the media-pack from edelivery.oracle.com.
But I am not sure how to do it because I have tree-tier architecteur at home :
One computer with LINUX OS (OEL 5.5) which hold the Oracle Database 11gR2 -- Database tier
One computer with LINUX OS (OEL 5.5) which hold the Oracle Application Server 10g ver 10.2.0 (infra and middle) -- Midel-tier
One computer with XP OS -- Client tier
Could any one explain me how to install it?
Regards,

But I am not sure how to do it because I have tree-tier architecteur at home :
One computer with LINUX OS (OEL 5.5) which hold the Oracle Database 11gR2 -- Database tier
One computer with LINUX OS (OEL 5.5) which hold the Oracle Application Server 10g ver 10.2.0 (infra and middle) -- Midel-tier
One computer with XP OS -- Client tier The above is two tier architecture (not three tier) as the client tier is not considered as a tier in Oracle Apps installation.
Could any one explain me how to install it?Do you already have a Database and Oracle AS10g installed? Please elaborate more.
Oracle Apps R12 comes with 11gR1 database, and to do multi-node installation please refer to these threads.
R12 Multinode installation
Re: R12 Multinode installation
Install oracle EBS R12 on 2 machines
Install oracle EBS R12 on 2 machines
To upgrade the database later to 11gR2, please refer to:
11gR2 11.2.0.2 Database Certified with E-Business Suite
http://blogs.oracle.com/stevenChan/2010/11/db_11gr2_11202_ebs.html
Thanks,
Hussein

How to install LR5 via the Cloud? LR4 says no updates available. [was: Help with purchases and upgrades.]

I am a CC member.
1- I can not find the chat support.
2- I need LR5 but my app says no updates, even though I am only on 4.
3- This site sends me in circles and my app is no help whatsoever. I have now updated to OS X Yosemite v10.10, and need LR5. I purchased CC for this reason, but I still don't see how to upgrade. After hours of installs and upgrades, I'm getting frustrated. Thanks for the help, its much appreciated.

AprilThisWay it is likely your Lightroom issue is related to having the incorrect Adobe Application Manager/Creative Cloud Desktop application installed. The current release version is 1.8.0.447. You can find additional details at Creative Cloud Help | Creative Cloud app for desktop | Release Notes.
I would recommend utilizing the uninstall instructions available in the link referenced in message #7. Once you have run all the available uninstallers available in the Applications/Utilities/Adobe Installers folder then please use the CC Cleaner Tool. You can find details, and a download link, for the CC Cleaner tool at Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html.
If you continue to experience difficulties can you please post what changes were made to your computer in addition to upgrading to Mac OS 10.10.

How to install lightroom via a download and activate via a serial number

I have purchased Lightroom 5 - I however do not have a DVD reader. I downloaded LR but when entering my serial number on the box I bought I get the message "invalid serial number - please contact customer service". Hoping that somebody can help me on this forum.

I found the reason - I downloaded the LightRoom Creative Cloud version. I have bought the LR Windows/Mac client. I finally found on other products download the LR version. Way to do it - is install the LR client trial version - go to HELP - Lightroom registration and you can enter I could enter my license key. Just created my first import - great !

How to install Delegated Administrator 4.5 into an existing directory.

I have installed iDA 4.5 in a test environment and found that it works beautifully for what I need it to do. The problem that I have is that our existing directory is so different from the one used by iDA that I have no idea how to successfully make our directory "manageable" with iDA.
The installation of iDA wants to create a new organization upon installation (like o=isp). I have made a test copy of our directory on a new server and have tried to point to our organization (o=mmi). When I do this it says:
"This suffix is not an iDA Entry. iDA can't manage it."
If I select another suffix like o=isp, it installs just fine, but obviously all of our user and group information cannot be managed.
Our directory structure is also significantly different than what iDA expects. When you create a new organization in iDA, it automatically uses an ou=People and ou=Groups for storing that information. Our existing directory starts at o=mmi as the root and then has a number of ou's for different geographical locations (such as ou=utah). Then the users and groups are in that OU (no sub-OU of People or Groups). If I can get iDA to install in o=mmi, I still have to make it understand that all users and groups belong in that ou.
Does anyone have any experience or better documentation in getting this to work with an existing directory. It looks like it's going to be a lot of work, but I believe it will be worth it if I can get to the type of web administration that I saw while evaluating the product.
Any help would be greatly appreciated.

I had such a problem, once, I learned shell scripting, awk and then perl to solve this problem.
The way you have your users structured was the old policy, when people started to use LDAP (or X500) this was the most obvious way of doing things. Now, we know that APPLICATIONS need to read the ldap structure, not people so, I would use a 2 steps (and several monthes) aproach:
Now you have an OU=NY with all the people that work in New York, create a group called New_york and, put all the NY peole in the ou=people and, put a reference to the user in the New_your group.
The best way of doing this is exporting all your user DB to an ldif file, making your scripts and, go for it.
Test everything and, then, start to change your structure again to put it in the iDA format. this way, not only you get the advantages of iDA but, you also get a better ldap structure and, possibly, much faster.
It took me something like 2 monthes of work to do that, whithout stoping my regular work because of that (30 - 60 minutes per day). If you have a very big structure, do a tar of your Directory files to another machine and, work there. Just be carefull with the changed passwords.
Hope this helps

How to install and add Enterprise Portal over an existing ECC server

Hi Guys
We have already installed the ERP package (ECC) and we have enough memory and diskspace on the server and there we are considering installing Enterprise Portal over the existing server so that we can use both ECC and EP.
How can we do this? What are the steps to do it? I want to make sure that we don't corrupt the existing SAP stuff on the server, but just want to install enterprise portal .
Your comments or suggestions will be highly appreciated.
Thanks
Ram

just went ahead and installed from scratch

How to install the Solairs 9 without change my existing partition?

I got 2 partitions on my hard drive: 1)Primary partition, running Win2000, occupied 40% of my hard drive.
2)Ext partition, which divided into two drives E & F. I want to install the Solaris 9 on the E drive with out change to other drives(C,F).
Q1: Which following selection I should choose from the Installation program: 1) Create a partition 2) Specify the active partition 3) Delete a partition 4) Exit 5)Cancel
Q2: Is there any detailed installation info for those who just want to add Solaris to their existing parition?e.g: How to set up SWAP drive?
Thanks,
New to Solaris

I cannot advocate strongly enough that you get a removable hard drive enclosure. I have these on three of my PCs and it's a god-send.
It's a unit that sits in one of your 5-1/4" bays and attaches to your regular IDE cable. Each hard drive that you want to swap out is in its own tray. When you want to boot to a new operating system, shut down and switch trays. It adds about 10 seconds (if that) to the reboot that you would have to do anyway to get to the other operating system. With this method you have absolutely no need to mess with dual-booting since each operating system will have its own hard drive.
They're not expensive either. The appropriate products from Lian-Li used to be about $25 for the 5-1/4" enclosure and one drive tray and about $17 for each additional drive tray. There are similar products available fromStarTech. They're of a higher quality but are more expensive.
Trust me. Get a removable hard drive kit. You'll never want to mess with dual-booting software again. I know that I never will.

How to install Oracle Form and Report 6i on existing database

Hi all please help me,
My system is rhel 3 (update 6). My question is how can i install Oracle form and report 6i on my machine, which is already have database 10g R2? I known i have to create two separate ORACLE_HOME. Since i already had database 10g R2, can i just go head install Oracle form and report 6i on separate ORACLE_HOME? or i need to remove database 10g R2 first, and then install Oracle form and report 6i
Thanks in advances

<< Why Forms/Reports 6i and not something later, BTW? >>
Presumably he has to support a client/server application. They haven't all disappeared overnight, despite what Oracle tell everyone.

How to Install & Configure Web Dispatcher

Hi techies,
How to install and configure SAP Webdisptacher in an existing BI System.
What are the parameters need to be set after installation like ports, memory , profile parameters etc., for webdispatcher.
I am new to this concept
Thx in advance.
Haroon Khavi.

Hi,
The webdisp does not need the SID of the system it is connecting to. The only parameter it needs is a "Unique Instance Number for SAP Web Dispatcher (SAPSYSTEM)".
You can check this with the following command:-
sapwebdisp -bootstrap
If you are installing the webdisp on a server that already has a SAP instance then you have to enter a unique number (not the SAP instance number). You can used any value from 0-99.
This parameter is used for shared memory allocation so should not be the same as the SAP instance or any other webdisp installed on the same server. Of course if there is only the webdisp on the server than any value from 0-99 can be used.
Hope this helps
Michael

HT6162 My phone will not let me download the most recent update for iOS 7.1. It says I need a wifi connection and will not allow me to push the 'Download & Install' button, even when I am at home and my wifi is on. How do I fix this?

My phone will not let me download the most recent update for iOS 7.1. It says I need a wifi connection and will not allow me to push the 'Download & Install' button, even when I am at home and my wifi is on. How do I fix this?

Unfortunately yes, though technology would never move on if it kept to older standards and did not strive to do more.
The app store always gives you the option to use a previous version of the app IF it is available for your device.
Sorry but you are stuck without new hardware.
PJRS

How do I install Mountain Lion on both my iMac Desktop and my wifes MacBook

How do I install Mountain Lion on both my iMac Desktop and my wifes MacBook Pro?

Open the app store, purchase ML. go to second computer open app store select purchases at the top and click download. This is provided both computers use the same account.
http://www.apple.com/osx/how-to-upgrade/

How can I tether via USB my iPhone 4S with iOS 7.1.1 to my MacBook with Snow Leopard 10.6.8 and iTunes 11.2.2 ?? Please note that at the same time Personal Hotspot via both WiFi and Bluetooth works perfectly!

How can I tether via USB my iPhone 4S with iOS 7.1.1 to my MacBook with Snow Leopard 10.6.8 and iTunes 11.2.2 ?? Please note that at the same time Personal Hotspot via both WiFi and Bluetooth works perfectly!

Hello, lustige luka.
Thank you for visiting Apple Support Communities.
The Personal Hotspot feature using USB should be as simple as connecting the device to your Mac via the USB cable when Hotspot is enabled. Here is some more information regarding this feature and an article that will provide some troubleshooting steps if you are experiencing an issue.
iOS: Understanding Personal Hotspot
http://support.apple.com/kb/ht4517
iOS: Troubleshooting Personal Hotspot
http://support.apple.com/kb/TS2756
Cheers,
Jason H.

How to install Solaris 9 connected via Hyper Terminal

Hi All ,
We have planned to Install Solaris 9 in E250. We have connected the console throgh Hyper Terminal.
We are not able to see the options clearly in the console. The options are not in clear way. It is very difficult to install.
Please advice how to install Solaris 9 in Text mode and terminal type for installing the solaris 9 via Hyper Terminal.
I am awaiting for your reply.
Regards,
R. Rajesh Kannan.

When the install starts, select a terminal type of VT100
The screens should display correctly then.

How to Install Tiger on a 1st series iMac via Ethernet?

Hey guys
I want to upgrade a 333MHz iMac to Tiger which has no firewire ports, only USB. I don't have an external HD to boot from, except my G5. I want to find out how I can install it via ethernet, is it possible? And if it is, how would I do it? Any help would be much appreciated.
Thanks a lot in advance!

Luis,
First off, if you could install Tiger on that machine you would be limited to the first 8 GB of the hard disk:
http://docs.info.apple.com/article.html?artnum=106235
That gives you very little room to work with for anything that needs to be on the boot partition.
Also if Jaguar hasn't been installed on the machine, you'll want to upgrade the Firmware before installing Jaguar or later on the machine, otherwise face the possibility of a permanently dark screen.
http://docs.info.apple.com/article.html?artnum=86117
As you already have a PowerMac G5, let that be your Mac OS X machine, and network your iMac to the PowerMac G5 and leave the iMac in Mac OS 9.
For more on Apple's migration to Mac OS X and the best ways to proceed, see my FAQ:
http://www.macmaps.com/macosxnative.html
I do not recommend upgrading the iMac G3 333 past 10.3.9 (though as you can see you'll still need the firmware update and be limited to 8 GB if you go to Mac OS X). Let the iMac G3 run what it is able to run according to Apple. Doing otherwise would be akin to putting a jet engine on a chariot. It may work, but then again, any attempted further upgrades would result in a serious jalopy of a machine.
Disclaimer: Reference to links I make to my Macmaps.com website are a for your information only type reference. I do not get any profit from this page, and it is open to the public.

How to install a via wifi TC in an existing netgear N WiFi network?

Similar Messages

Maybe you are looking for