How to install BC Components in BI 7.0

HI Experts,
Here I am posting my query clearly. In RSA1-----> Business Content
In the menu bar EDIT--->Set BC Components. Here I don't have any BC components available. The whole table is completely blank. How can I get those BC Components installed and how to get thm in active state.
Points will be rewarded for helpfull answers
Regards,
Ravi

HI Srinivas,
Can you pls guide me how to upload tht BI content to get all those BC components. Or give me your gmail id so that you can guide me further in solving issue.
Points will be rewarded if my problem is solved.
Regards,
Ravi
Message was edited by:
Ravi Shankar

Similar Messages

ColdFusion 10 - install admin components

Hi,
I was just wondering if there were instructions around on how to install admin components for remote start & stop after installation of CF 10 has been completed?
I'm looking to update some development servers for use with ColdFusion Builder, but I can't find any information on how to install the component on linux after the fact.
I've searched through the installation guide, but haven't come up with anything.
Cheers,
Simon

Hi,
CF 10 is not supported on CentOS.
Please refer the Support Matrix:
http://wwwimages.adobe.com/www.adobe.com/content/dam/Adobe/en/products/coldfusion/pdfs/cf1 0/coldfusion10-support-matrix.pdf
Having said that, this can also be related to permissions that specific user is granted, with which CF 10 is being install. Make sure you have root privilidges and the install directory too has complete authority for the install to take place.
But we will still advice you to be on a supported environment for CF 10.
HTH.
Rg,
Spsb

How to find the installed oracle components( oci , occi) versions?

Hi,
could you please help me to find out the version of installed oracle components?
ex: which version of OCCI installed?
one way is using OUI gui tool.
I also got this info from oracle inventory file.
under $ORACLE_HOME/inventory/ContentsXML/comps.xml
But is there any best way or command to look for the same.
Thanks,
Krish

The "best way" almost certainly depends on why you're looking for the information and what tool(s) you're using.
If you're asking a human being to get the information, the OUI is generally going to be "better". If you're writing a program to get the information, parsing the inventory XML is likely to be "better".
If you have multiple Oracle Homes on a single machine (particularly Oracle Homes with different major Oracle releases), though, or you have various failed/ incomplete/ obsolete installations on various machines, or if you're trying to figure out which version of the libraries would actually get used when a particular application starts up (assuming there are multiple applications on the machine), things start to get rather trickier.
Justin

How to How to install ATI Radeon HD2600 driver on bootcamp 3.0 windows 7 partition w/black screen problem

Ok....so i've posted this question in a different way, and i gotten several "scratch the surface" answers from people just saying to install "Ati catalyst", or insert the os x dvd and run set up.exe, and update to boot camp 3.1 or 3.2...while these all seem like great suggestions, I am finding myself needing more specific direction or "hand holding" so to speak.....here is the MAIN problem...
The Background/history
I used boot camp (3.0, and i found updates for 3.1 for imac and for windows, but can't find for mac pro, AND they all are ".exe" files which run on windows..which as you'll see is the big part of my problem...So I recently updated my mac pro (with the ATI Radeon HD2600 graphic PCIe card with 10.6.7 from 10.5.8. I created a single partitioned drive to install windows 7 professional 64 bit. The download software function didn't work (Thanks, APPLE for that poor level of support) so have to select the option that i have already downloaded, or have other media with the drivers already on it....i restarted with the windows 7 disk in....
The installation of Windows 7 Pro 64-bit
So the installation of windows 7 seemed to go flawlessly, was able to use my existing 23" hd apple cinema display (so somehow it has drivers that work with the graphics card, or maybe the motherboard's on board video components) and i select english, and install now, custom, blah, blah, blah...installation causes a few reboots, then restarts ultimately back in os x since that is the default boot os i use on this desk top and have to do the "opt" button to select booting in windows....so when i try restarting in windows, now using the actual boot drive on which i am installing it, it ran through another reboot or two, but then after that, my display goes black.... in the communities, the solution sounds super simple... "go download the ATI catalyst for the black screen problem....windows 7 doesn't have device drivers that work with the ATI radeon hd2600...no problem, just go download and install...."
The problem, re-emphasized : I cannot even finish the install for windows, because of this driver problem....i cannot see anything....I have tried to reboot in safe mode, and that then seems to invoke whatever basic drivers that do work, likely through the motherboards onboard video vs the actual graphic card, and the screen works and says that it's wanting to complete the installation, so i'm thinking awesome this is gonna work....and then.. "windows installation was not completed and cannot be completed in SAFE MODE, need to restart, blah, blah, blah" pops up...and forces reboot...so Safe Mode allows me to see, but won't allow me to finish the install of windows 7...and without completing the install i can't run (ranther I DONT KNOW HOW TO) any of the various .exe files everyone is telling me are the solutions to my problem...like update 3.1 and 3.2 bootcamp...they're all .exe files? not sure why, because bootcamp runs in 10.6.7 i thought, but whatever...it needs running Windows to execute...then the ATI radeon hd2600 driver for windows 7 that i downloaded from the site has an installation program that is an .exe file, which needs windows to run... Does this make sense, why i can't just use these fixes, that seem to be the only fixes out there....so can someone school me step by step here (not just the highlights) of how to update bootcamp, and how to install the ati radeon driver without having been able to complete the windows 7 installation because the monitor goes and stays black????
This is so very frustrating for the record...and any substantial help "not just go download this..." would be immensely appreciated.
Some other things i've been told to try that i've tried and nothing seems to happen as i'm told it will....
---I've been told to install the osx dvd and run "setup.exe" - AGAIN...it's an exe file...and 2 - when i put in the os x file it just wants to re install 10.6...so need more help if this is even a real solution to understand how to make it work...
---I've been told to update boot camp to 3.1 and/or 3.2 from 3.0, using Apple Software Update....Well, my software update is saying everything is up to date and there is nothing new to download at all, and when i reverify the bootcamp version it is still only 3.0.2...and again downloading the updates from www.apple.com/support/ for 3.1 and 3.2...all of those are .exe files...need windows to run them...again, refer to the problem described in detail above...
---I've been referred to the black screen on imac early 2011 thread saying it should fix my problem...and reading it it SEEMED like the most promising resolution...it involves creating a boot flash drive for windows 7 and an xml file that sets the imac drivers to auto install during the windows installation..and it got me farther than anything else..but still ultimately ended up in the darned black screen...my assumption is that it's because it's for imac and not mac pro so not ati-radeon specific drivers....ok....that's enough..please...anyone who thinks they can help...your help is desperately needed...thanks so much in advance!

hey Hatter, thanks so much for getting back...so just to be super clear...is there no way to install the drivers using an exe file given my current state? no way to do it with command prompt or something? if can make work with existing card, i'd prefer it...now when you say it's 'toast' how do you mean? it works well with the os x partitions and always has...so i'm not sure i follow, just want to be clear...
Now to your point of starting with only the one drive installed...so i would put that bootcamp drive in bay 1 and disconnect the rest...i'm not totally sure what you're suggesting the effect should be of doing this? just that i'm just installing windows without the bootcamp deal...but if windows 7 doesn't support the ati radeon hd2600, it still will go black screen no? or you're saying it will run video through the motherboard if it's the only bootdrive, and will run all the way through the windows install without trying to switch over to the hd2600? (slrry flr these questions..just really want to make sure i understand what you're telling me..thanks so much for your patience and help by the way...it's very greatly appreciated...your support is priceless!
So now, assuming none of the above is possible...referring now to the ati 5770 that you referred to...you mention it works with 10.6 well, and that windows 7 supports it ...2 questions on that
1) Windows 7 supports" meaning, out of the box windows 7 supports it? or will i have to install drivers still through some update, because again, if that's how i have to do it, then won't work, cuz can't start windows to see anything to install any drivers or run any thing at all...so it would have to just work with initial installation.
2)hardware wise for my Mac Pro 3,1...intel dual quad core xeon, blah blah....will this card work? it's a PCIe and should fit on my board no prob, etc?

How to install the JDI and what re the prerequisites

Hi All,
Anybody tell me ,
AS iam new to the SAP NetWeaver
How to install the JDI,
I have got one document in sdn . It has given the prerequisite as.
Complete installation of DI (CMS, DTR, and CBS) on SAP J2EE Engine
Should i install all the above component? or any one of the components, if need to be, can u anbody tell me how to install , where i will get the help.
How i need to setup the JDI.
We are working on Webdynpro, and VC, some of the portal components development.
Installing the DTR alone is enough to move forward, or JDI is required to setup?
Please repsond me.
Regards
Vijay

Hi Krishna thanks for the reply,
Our Current Portal Version is
NetWeaver 2004s SP 11.
My question, should we need to install all these following components before we setup the JDI.
Complete installation of DI (CMS, DTR, and CBS) on SAP J2EE Engine.
or
As per your reply , my understanding is , By installing the JDI , i will be getting all the above components.
BCZ in that document it is gving clearly that, the above components are prerequisites for installing the JDI.
Can u tell me where i will get that service packs in the service market place.
Regards
Vijay

How to install wireless on a Satellite 5200-903?

Due to a very bad virus I recovered Windows on a Satellite 5200-903 of a friendly businessman. But back home he saw: no wireless LAN could be used... It seems, that cause the WLAN-switch was "off" no WLAN-driver was installed/recovered...
Now he wants to come to me again tomorrow or the day after tomorrow - and I MUST know, how to install everything until then... he also will bring me his router, so I can configure everything for him on the notebook AND router (WPA, if possible).
But I found TWO drivers: one was a direct download of a small file of "Agere" - wlesslan-xp-7620390.zip
The other is from "Atheros", and the download is a links to another website "Toshiba EMEA - Wireless LAN Driver Portal" http://aps2.toshiba-tro.de/wlan/?page=downloads , where I have to identify the WLAN adapter... But: on the first download-site (I mean BEFORE redirected to "Toshiba EMEA") there is at the list "Model" NOT any Satellite 5200.
Which driver is correct? Are there different WLAN-adapters in the 5200-903 series? Is it possible to find out the adapter model BEFORE he gives me the Notebook?
And in the list of drvers for the 5200-903 there was a download "WLAN hotkey" wlkey-xp-2003.zip ? Do I need that too? Do I need any other things?
And does such an "older" WLAN-Access work in another way than the integrated WLAN of a centrino e.g. ? I just know how to log into a WLAN with newer notebooks: button "wireless networks" on the right buttom oft windows, then chose the WLAN name to connect and type in the key, if needed.
Please help me, he lives 100 miles away from me and has not much time, he comes again to me just for that matter, and of course he was not amused when he returned home and couldn't connect to the internet... and he's an ABSOLUTE noob in technical things, so I cannot tell him how to do it on his own and need your help quickly.
Thanks a lot!

Hello Herb
I just want to make the whole story short and simply. After installing OS install drivers for hardware components. According the notebook specification for Satellite 5200-903 it is WLAN ready model and I do not know which WLAN card is inside. You friend should have info about that.
If there is Atheros WLAN card the right driver you can find HERE
After driver installation install all Toshiba designed tools and utilities starting with COMMON MODULES. It must be installed at first. WLAN-hotkey utility is important because using FN+F8 key combination you can enable/disable WLAN card.
WLAN software (Atheros WLAN client utility) is not necessary because for WLAN you can use WXP WLAN settings. You can use it if the WLAN card is activated properly.
So I hope you will set WLAN properly and if you need more assistance please write again.
Bye and good luck!

How to install the Remote Desktop Services role on a Windows 2012 R2 Server

Hello,
I am a bit confused on how to install the RDP role on a 2012 R2 server. I have a two server domain and would like to make the second member server an RDP server to host applications (Word, Excel, a medical software, etc.) where users from their windows
7 desktop will use the Remote Desktop Connection to connect to the server, create a session and do their work. When installing the role, I am prompted with two options:
1- Role-based or feature based installation
2- Remote Desktop services installation
I see the RDP install option in both cases.
1- Which one do I use?
2- What role services do I install? (Connection broker, Gateway, Licensing, Session Host, Virtualization host and Web access). I think I need the first four only.
3- When installing software after RDP, I use the Change user /install and Change user /execute commands. What happens to the software that is already installed? Can remote
users use those?
Any help will be very much appreciated.
Thank You,
Victor.

TP,
Thank you for your response. I added the RD Licensing thru the Role-based option.
Also opened the local group policy thru gpedit.msc and added the server name and the licensing mode type to Computer Configuration -> Administrative Templates -> Windows Components -> Remote Desktop Services -> Remote Desktop Session
Host -> Licensing
Use the specified RD license servers = NameOfMyServer
Set the Remote Desktop licensing mode = TypeOfMyLicense (Per User in my case)
Thank you again,
Victor

I've installed windows 7 with the help of bootcamp on my macbook pro 2011. Please help me how to install mac drivers for windows7 64 bit???

I've installed windows 7 with the help of bootcamp on my macbook pro 2011.
Please help me how to install mac drivers for windows7 64 bit???

You either download drivers from within Boot Camp Assistant and save to USB FAT disk, or you insert and use 10.6.x OS X DVD when in Windows and install and run the SETUP from there.
General Help:
Boot Camp 4.0, OS X Lion: Frequently asked question
http://support.apple.com/kb/HT4818
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
create a Windows support software (drivers) CD or USB storage media
http://support.apple.com/kb/HT4407
Installation Guide Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
- support articles and tips, how to.
http://www.apple.com/support/bootcamp/
Macs that work with 64-bit editions of Microsoft Windows Vista and Windows 7
http://support.apple.com/kb/HT1846
Step 4: Install the Boot Camp Drivers for Windows
After installing Windows, install Mac-specific drivers and other software for Windows using your Mac OS X installation disc. The Mac OS X disc installs drivers to support Mac components, including AirPort,built-in iSight camera, the Apple Remote, the trackpad on a portable Mac, and thefunction keys on an Apple keyboard.
The Mac OS X disc also installs the Boot Camp control panel for Windows and theApple Boot Camp system tray item.
To install the Boot Camp drivers:
1 Eject the Windows installation disc.
2 Insert the Mac OS X disc. If the installer doesn’t start automatically, browse the disc using Windows Explorerand double-click the setup.exe file in the Boot Camp directory.
3 Follow the onscreen instructions.
If a message appears that says the software you’re installing has not passed Windows Logo testing, click Continue Anyway.
Windows that appear only briefly during the installation don’t require your input.
If nothing appears to be happening, there may be a hidden window that you mustrespond to. Check the taskbar and look behind open windows.
Important: Do not click the Cancel button in any of the installer dialogs.
4 After your computer restarts, follow the instructions in the Found New Hardware Wizard to update your software drivers (Windows XP only).
5 Follow the instructions for any other wizards that appear.
6 Check for updated Boot Camp drivers by using Apple Software Update or going to www.apple.com/support/bootcamp.
If You Have Problems Installing the Device Drivers
If it appears that the Boot Camp drivers weren’t successfully installed, try repairing them.
To repair Boot Camp drivers:
1 Start up your computer in Windows.
2 Insert your Mac OS X installation disc.
3 If the installer doesn’t start automatically, browse the disc using Windows Explorerand double-click the setup.exe file in the Boot Camp directory.
4 Click Repair and follow the onscreen instructions.
If a message appears that says the software you’re installing has not passed Windows Logo testing, click Continue Anyway.
If you need to reinstall specific drivers, you can install one driver at a time. For example,if your built-in iSight camera isn’t working, you can reinstall just the iSight driver.
Individual drivers are in the Drivers folder on the Mac OS X installation disc.

Forgotten how to install Boot Camp

I had to reinstall Windows 7 64-bit because I needed more space for Mac OS X. After reinstallation, which went perfectly, I have forgotten how to install Boot Camp. This MBP 3.1 will not install Boot Camp from the Snow DVD because it says that 64-bit mode isn’t supported (not true). I installed several components by hand. All I remember from the old style of bulletin boards was to copy the Windows contents of the DVD on to the desktop, then to use SuperOrca to modify the ISO. I don’t, however, remember the exact details of what was supposed to be modified and how to do it. This is also supposed to prevent the error of Apple Software Update not recognizing the installation of BC 3.2 after it was done.
I can’t find the old instructions with the new format, so any help is appreciated. Peace.

Ok do this...
Insert your Windows Bootcamp Drivers Disc (aka OSX Install disc that came with your computer).
When you see the prompt from Windows Explorer, instead of clicking the "setup.exe" option scroll down and click in the Explore/view files (or something like that, don't remember.)
Look into the folder labeled as Bootcamp, then click another folder called "drivers", inside there should be another folder labeled as "Apple".
Inside, there should be a file labeled "bootcamp64.msi".
Single click the file (bootcamp64.msi) and once it's highlighted, do a right click ( to do you must do the following key combo Shift+F10)
A right click menu should appear. One of the options is labeled as "Troubleshoot Compatibility".
A dialog should appear, click on the "Start Program" option when it becomes available.
The Bootcamp Driver Wizard should now appear. Follow the prompts of Bootcamp Assistant as always.
Drivers will install automatically.
Reboot.
Welcome to Windows 7 64-bit on your now Dual-Citizen Mac...
Report back with your results...

How to install Oracle Content Database Archive Adapter for SAP on windows

Hi,
I would like to install CDAA(Oracle Content Database Archive Adapter) on 32 bit and 64 bit windows. Will somebody point me to where i can download this from (if its not free i would like to try out trial version first) . If it depends upon other oracle components what is that i need to install additionally . And if you could provide links to all the required components, it would be great help.
Also if there is any demo from where i can see what all features CDAA support and how does it compare to other products say IBM commonstore etc , please let me know.
Thanks a lot ..
-Rohit

Can any body help me to say thet "How to install Oracle Applications 11i(11.5.10.2) on Windows 2003 R2 X64 bit ' . Hi,
I believe, 11i installation on Windows 2003 X64 is not fully supported.
what is your os version:
if it is windows 2003 32 bit, then it is supported on X86-64 servers for both database and application tiers
If it is windows 2003 64 bit, then only datatabase tier is supported on x86-64 servers
Have a look at the following note
Frequently Asked Questions: Oracle E-Business Suite Support on x86-64 Doc ID: 343917.1
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=343917.1

How to install SQL Server Express in Windows 10

Windows 10 x64.
Windows 10 running on VirtualBox 4.3.18.
Setup in not started without any messages.
There is no Setup.exe in Task Manager.
There is no errors in Windows Logs (Event Viewer).
There is no any SQL Server folders in Program Files or Program Files (x86).
Compatibility with Windows 7, 8 doesn't help.
Was tested english versions:
SQL Express 2008 R2 SP1 x64, SQL Express 2008 R2 SP1 with Tools x64,
SQL Express 2014 x64, SQL Express 2014 with Tools x64.
How to install any version of SQL Express?
Thanks in advance.
So, I can reproduce this problem.
By default windows have not .Net 3.5 installed, but SQL Server tools need it.
When I run sql setup on fresh windows it started normally.
If run .net setup when sql setup already running it's OK.
But if you exist from sql setup (or not run it) and install .net in Windows Components it's impossible to run SQL setup.

Do
you read me?
I can reproduce this problem.
By default windows have not .Net 3.5 installed, but SQL Server tools need it.
When I run sql setup on fresh windows it started normally.
If run .net setup when sql setup already running it's OK.
But if you exist from sql setup (or not run it) and install .net in Windows Components it's impossible to run SQL setup.
to install .net framework 3.5,
just go to control panel -> programs and features -> turn windows features on and off -> check .net framework 3.5

How to Install, Configure and getting started with Hyperion Web Analyzer9

i have installed both
Hyperion Reporting and Analysis - System 9 Services Release 9.3.1 Microsoft Windows x86 Installer.
Hyperion Reporting and Analysis - System 9 UI Services Release 9.3.1 Microsoft Windows x86 Installer
Now tell me step by step on how to configure and how start Web analyzer
I dont know how to start server/services. (Any Web server required?)
Getting started would be more helpful.
Need help ASAP.
thanks,
Ram

Hi,
First of all have you installed Shared Services as you will need that as that foundation of the installation.
You will also need to install other components such as essbase if you intend to use it with web analysis.
If you have done that, then you will first need a repository to hold Reporting and Analysis information.
Afte start up the configuration utility and select the Reporting & analysis elements and go through the steps entering
details such as shared services connection, repository information.
It should install the components as a service.
You should really read the installation document :- http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/hs_windows_install.pdf
Cheers
John
http://john-goodwin.blogspot.com/

How to install SWC and load the package in CS3

hello,
does anyone know how to install a swc and load the package?
I have installed the two SWC as3corelib-.92.1 and
xmlsyndication.swc into components, but when I call the package
from an AS file nothing happens other than, 1172: Definition
com.adobe:xml could not be found.
They turn up ok in flash as components, but I think I miss
something..
anyone knows how to make these to work in flash so I can make
this:
http://www.ploem.be/blog/?page_id=105
hints, advice anything most appreciated.!
//Peter

right :) an instance of a component needs to be either
dragged to the stage, or in some cases into the file Library,
before they become available in your file. is it working
now?

How to install the Sample Apps in Hyperion Financial Management 11.1.2.2?

Hi,
Could please anybody tell me how to install the Sample Applications in Hyperion Financial Management 11.1.2.2?
The following is written in the Administration guide:
If you did not install the sample files, you can obtain them by reinstalling Financial Management
and selecting the Sample Applications component.
I cannot find the “Sample Applications component” among components during installation process.
There are only “Financial Management ADM driver”, “Financial Management Web Application” and “Financial Management: services”.
Hope this helps,
Thank you,
Vadim

After you install the sample application, all of the application extracts can be found under the below location.
Oracle_Home\Middleware\EPMSystem11R1\products\FinancialManagement\Sample Apps and Starter Kits\Sample Apps

How to install and configure the SQL Server

Hi All,
We have to install SQL server in the new server because the old server is crash and need to upgrade. Please advice How to install and configure the SQL Server to run SAP Business One 8.8 successfully and what part we do have to give attention.
Kind Rgds,
Steve

Hi,
Try this solution:
The step-by-step installation guide can be found in the documentation included in the installation media. (\Documentation\SystemSetup\AdministratorGuide_SQL.pdf).
Below are some important parts that you should pay attention to during the Installation process.
Resolution
Collation setting: It must be set as SQL_Latin1_General_CP1_CI_AS,even the company DB is non-english location. The company DB will be created as corresponding collation settings automatically.
Instance and TCP Port : It is recommended to run SBO on default instance and TCP port 1433. Otherwise,some optional components such as B1i may not work properly.
Native Client: SQL Server Native Client should be installed on every client machine to enable the ODBC connection to DB server.
Rgds,

How to install BC Components in BI 7.0

Similar Messages

Maybe you are looking for