How to install Nac Agent 4.8.3.594 patch (Patch-CSCty91628.gz)?

Hello, Guys
I have installed NAC 4.8 with agent 4.8.3.594 in the Mac OS Mountain Lion 10.8.2 and NAC Agent isn't working.
We found these Cisco Website information:
http://www.cisco.com/en/US/docs/security/nac/appliance/release_notes/48/483rn.html#wp1310587
Support for Mac OS X 10.8
Mac OS X Agent version 4.8.3.594 supports Mac OS X 10.8 "Mountain Lion". You need to download a server patch to enable the support from the following URL:
http://software.cisco.com/download/release.html?mdfid=282855549&flowid=34712&softwareid=282562546&release=4.8.3&relind=AVAILABLE&rellifecycle=&reltype=latest
Someone How to know install the patch (Patch-CSCty91628.gz) and Where I do it?
Tks,
Rodrigo Freitas

Similar Messages

After install NAC agent I must remove cable before open windows session normaly

Hi
I use ISE 1.1 and NAC agent 4.9
I have configure my catalyst 2960 port with dot1x and install NAC agent on many computer
But I observed that I am unable to open windows session on some computer (windows 7)
When I enter login and password, then I got black screen and nothing else, then if I remove the network cable on my computer, the black screen change and move to the windows desktop normaly
Why do I need to remove network cable before get to my desktop normaly ?
Please How can I fixed this issue ?
Thanks in advance for your help

Hi
The given link might be helpful regarding your issue:
http://www.cisco.com/en/US/netsol/ns466/index.html
http://www.cisco.com/en/US/prod/collateral/vpndevc/ps5707/ps8418/ps6128/product_data_sheet0900aecd802da1b5.html

ISE redirect to install NAC Agent for Anyconnect users with Split Tunnel?

Due to management directive I am not able to disable SPLIT TUNNEL for our VPN users. For this reason, I can not figure out how to enforce the REDIRECT to ISE for forcing the VPN users to install the NAC AGENT.
Is this possible? If so can we get some documentation on how this is done? Screenshots would be great.
Thanks,
Dirk

I couldn't find the answer that I seek in that doc.
I am trying to see if I can force traffic to the redirect for installing the NAC agent, even on split tunnel traffic....perhaps forcing the first webpage the user opens forces the user to the redirect page if the NAC agent isn't detected.
Thanks,
Dirk

How to install diagnostic agent for nw 7.0sp17, with solman ehp1- sp25

Hi Gurus,
we are using NW 7.0 Enterprise portal at SP17, want to configure E2E. So installed solution manager 7.0 EHP1 SPS 25.
Ran the Guided procedure solman_setup successfully. with intitial config, basic config and pending at managed system config.
Here my question is:
do i need to install smd agent on solman? or solman itself comes with agent. i cannot see any agent in mmc on solution manager.
What is SOLMANDIAG and SOLMAN AGENT, SMD Agent and Host agent.
The guide (https://websmp207.sap-ag.de/~sapidb/011000358700000952852009E) says before install SMD agent, install host agent, diagnostics agents are available 7.11 on wards, while installing smd agent sapinst asking SAP Unicode Kernel 711 , but currently my NW Portal system is using kernel 7.0..
Any guide, how to proceed for E2E on nw7.0 SP17 with solman ehp1 sp25( highest availale spack)
Thanks in advance.
Regards
Balaji

Hi Balaji,
As per the SMD agent 7.11 installation guide (https://service.sap.com/~sapidb/011000358700000952852009E) , Page 6 and 8, you would need to download the standard NW 7.11 DVDSs( usually kernel and Installation master) and SMD agent installation packages from the SMP. Location is mentioned in the guide as well.
For your query that Portal is based in i386, these are two different things. The SMD Agent will be installed with its own kernel and also 7.11 kernel is not support edon 32bit. However the SMD agent will use its own 7.11 64bit kernel and Portal will use its i386 kernel. Hopefully your hardware is able to support both. I recommend to proceed with x86_64 7.11 kernel for your SMD installation. Incase the hardwar does not support this, go for alower release of SMD Agent wherein the kernel supports 32 bit hardware.
Best Regards,
Srikishan

How to install Cisco Agent Desktop 7.6(1) on Win7 X64?

I am trying to install Cisco Agent Desktop 7.6(1) on my Windows 7 64-bit laptop. This
error keeps poping up:
http://i.imgur.com/xtBFm.png
This directory in the error message does not exist on my computer. Other x86.Microsoft.VC80.CRT... folders exist, but they have different names than the one in the error message window.
What can I do to install CAD ?

I ran into a different problem back when WIN7 was released, the error was along the line CAD detected unsporting OS. No matter how I finagled the OS nothing would work. I did read a little blurb to modify the MSI install file and it works quite well. I have since installed my modded MSI Agent Desktop and Supervisor Desktop on WIN7 64bit also no problem at all. Locate yourself a copy of SuperOrca and open Agent Destop.msi and scroll down to LaunchCondition Delete the top two lines
Condition and Description
#1 (CADOR) OR ((VersionNT=500 AND MsiNTProductType=1) OR (VersionNT=501) OR (VersionNT=600) OR (VersionNT=500 AND MsiNTProductType>=2 AND NOT SERVER_INSTALLED) OR (VersionNT=502 AND NOT SERVER_INSTALLED))
#2 (CADOR) OR (NOT (SERVER_INSTALLED OR SUPERVISOR_INSTALLED))
Save the Agent Desktop.msi to something like Agent Desktop WIN7.msi save it someplace handy and run it.
You may find you need to run as admin IF your using WIN7 PRO/HOME etc etc Ultimate shouldn’t give you these probs if the application installs yet wont launch go to control panel look into running compatibility etc etc
If you have odd securities errors while running the program Blame the OS go to the Cisco install folder and give the domain user full control security ect on THEIR folder, this will clear up any client side issues.
Most who run into this problem delete the two lines indicated above then smooth sailing.

How to install intelligent agent

Can someone please tell me how to install the intelligent agent on the NT server 4.0 platform? I can't install the intelligent agent extension pack due to my intelligent agent hasn't been installed yet.
Please help!
null

Explain what kind of installation you did. Accoding to what I know in 10g there is not an intelligent agent service to administer it explicitly.
Joel Pérez

How to install CCMS Agent for AS400 ?

Hi All,
Please advise any document how to install CCM4X and CCMSPING in the AS400 server (ECC6). Because i cannot find the CCMSAGENT file in the service market places.
is CCMS Agent supported for AS400 ECC satellite systems ? my solution manager installed in windows server.
thank you and Best Regards
Fernand

Read SAP Note 522878 - iSeries: Availability of CCMS Agents
Regards
Juan

How to install puppet agent on solaris 10 sparc

I would like to know how to install and configure puppet on solaris 10 sprc

Proxy configurations are most often done within the application software that needs that function and not necessarily done in the OS. That permits you to make very specific settings and not just generic global settings that could conflict with other software.
Can you tell us what research you have done on the topic?
For example, have you glanced through a Google search on "solaris web proxy" ?
If you are hoping to use a specific web server application your forum post might be better placed in a forum space for that software instead of in a general OS forum space. What application software will you be using?

How to install CCMS agent in MSCS cluster system?

Hi,
We just migrated our WAS 7.0 system from a single to a MSCS cluster system and we need re-install CCMS agent on it. New cluster system have two nodes. Each node we have local SAP instances. We have central instance for message server running on a shared drive, which can failover to one of the nodes. My question is when I install CCMS agent, where I should I install it? Each node of the cluster on local drive or only shared drive or I have to install on three places?
Thanks you.
Yujun Ran

Hallo.
Did you solve your issue?
I followed Oss note 536954, but I am not sure that it is for new cluster system.
Furthermore, the CCMS agent that you installed, point to a CEN system (as Solution manager for example) and as second system to the central instance ?
Thanks.
Mario

How to install SMD Agent on a MSCS?

Hello helpers,
we have installed a PI 7.1 (double stack) on a MSCS environment. The next step is to connect the PI 7.1 SAP system to our SolMan and to install the diagnostics agent. Unfortunately I wasn't able to find any documentation explaining an installation of the SMD Agent in a MSCS environment.
Does anybody know what has to be done? Do I have to install 3 agents, one on every MSCS node and one in the SCS/ASCS cluster resource group, or is only one agent needed in the SCS/ASCS cluster resource group?
Looking forward for any answers,
Sascha Piotrowsky

Hi Sascha,
To distribute a solution to the diagnostics the install path must be verified in TC SMDIAG_WIZARD. To verify the install paths an installed SMD-AGENT is neccessary.
Yes
Another point is that we like to monitor the J2EE Servers and Dispatchers from the 2 instances on "nodeA" and "nodeB". So in my opinion at least 2 SMD-Agent should be installed, one on every node. Do you agree?
No, you need one SMD Agent, this agent can then monitor multiple instances on one virtual host. The connection is only between virtual host and agent, not between instance and agent.
But what shall I do with the ASCS00/SCS01 instance. Does an SMD-Agent installation bring any effort on "clusterSID" or is it a must?
It's not a must, only relevant if you want to receive host metrics from this host. As this is only virtual, I would not install one here.
Best regards
Michael

How to install OEM agent into existing OEM DB Console

Hey gurus
A default OEM was created during 10G database creation.
Plan to setup central monitoring by using OEM in separate host.
Understand an agent need to be either push or install in the target that want to monitor. However, the existing dbconsole has been installed in each individual db during db creation.
How can the central OEM able to monitor other database on on other servers ?
Pls advise.

thanks HG
you mean to say i have to nstall grid control as well i mean . Beacuse right nw i can access and monitor my A database on server A . Now i want to Monitor B database on B server with out installing- configuring db console on B . so u mean to say i meed to install grid contol on A and grid agent on B so that i can managed both server centrally . Do u have any supporting link
Regards

How to install speech Agents with Captivate 7?

Hi,
I am using Captivate 7 (32bit version for Windows), which only provides a single default speech agent. A link on the Speech Management screen enables you to download and install Neospeech voices.
I downloaded the file Cp7_win32_voices_installer.zip, extracted the files and then ran the set-up application. However, no additional speech agents are available in the Speech Management screen. What is the problem? I have tried rebooting my machine, but that has not helped. Any suggestions?
Thanks
Warren

Hi there
You might want to perform a double-check here. I'm not sure about this version, but in earlier versions, once you "downloaded and installed", all you really did was to extract the installer application to a folder. There was another step. Locating that folder and performing the actual installation.
So look at the folder and see if there isn't something like a "setup.exe" or similar that you need to run!
Cheers... Rick

How to Install CCMS AGENT in SOLMAN4X

HI,
I want to know what is the location of service market place where i can download my own certificate for my browser because everytime I access service market place i have to enter my user n pass manually.
I will post points for sure!
Thanks,

Afi
try
service.sap.com/sso-smp
Thanks
Prince Jose

How to install oracle9i on windowsXP-SP-2(about the patch)

Hi everbody,
I am finding certain problem in installing the oracle 9i ,I dont know how to get the patch which helps in installation,please give me the complete details
Thanks

You didnot tell what problems you are facing, i dont think that there is a patch you need "during installation".
Please tell abou the problem and on which step do you face this problem
Regards

How to install grid control agent

Hi All,
I have a two node rac cluster 11gr2 named rac1,rac2.And I have also installed OEM 11g on RHEL 5 on node3 i.e rac3.
Now i want to install agents on all of the rac nodes.And i have a oracle 10g agent.
Can anybody let me know how to install the agent and will there be any compatibility issues be there or not?

you can start with
How To Install Oracle 10g Grid Agent on RAC
http://repettas.wordpress.com/2007/10/21/how-to-install-oracle-10g-grid-agent-on-rac/

How to install Nac Agent 4.8.3.594 patch (Patch-CSCty91628.gz)?

Similar Messages

Maybe you are looking for